Deoxydehydration of Polyols

Reactivity of metal dioxo complexes

Metal dioxo chemistry and its diverse reactivity are presented with an emphasis on the mechanisms of reactivity. Work from approximately the last decade is surveyed and organized by metal. In particular, the chemistry of cis-dioxo metal complexes is discussed at length. Reactions are grouped by generic type, including addition across a metal oxo bond, oxygen atom transfer, and radical atom transfer reactions. Attention is given to advances in deoxygenation chemistry, oxidation chemistry, and reductive transformations.

Deoxydehydration of Biomass-Derived Polyols Over Silver-Modified Ceria-Supported Rhenium Catalyst with Molecular Hydrogen

Olefin production from polyols via deoxydehydration (DODH) was carried out over Ag-modified CeO₂ -supported heterogeneous Re catalysts with H₂ as a reducing agent. Both high DODH activity and low hydrogenation ability for C=C bonds were observed in the reaction of erythritol, giving a 1,3-butadiene yield of up to 90 % under "solvent-free" conditions. This catalyst is applicable to other substrates such as methyl glycosides (methyl α-fucopyranoside: 91 % yield of DODH product; methyl β-ribofuranoside: 88 % yield), which were difficult to be converted to the DODH products over the DODH catalysts reported previously. ReO_x -Ag/CeO₂ was reused 3 times without a decrease of activity or selectivity after calcination as regeneration. Although the transmission electron microscopy energy-dispersive X-ray spectroscopy and X-ray absorption fine structure analyses showed that Re species were highly dispersed and Ag was present as metal particles with various sizes from well-dispersed species (<1 nm) to around 5 nm particles, the catalysts prepared from size-controlled Ag nanoparticles showed similar performance, indicating that the catalytic performance is insensitive to the Ag particle size.

Transition metal-catalyzed deoxydehydration: missing pieces of the puzzle

Deoxydehydration (DODH) is a transformation that converts a vicinal diol into an olefin with the help of a sacrificial reductant.

H2 -Free Re-Based Catalytic Dehydroxylation of Aldaric Acid to Muconic and Adipic Acid Esters

As one of the most demanded dicarboxylic acids, adipic acid can be directly produced from renewable sources. Hexoses from (hemi)cellulose are oxidized to aldaric acids and subsequently catalytically dehydroxylated. Hitherto performed homogeneously, we present the first heterogeneous catalytic process for converting an aldaric acid into muconic and adipic acid. The contribution of leached Re from the solid pre-reduced catalyst was also investigated with hot-filtration test and found to be inactive for dehydroxylation. Corrosive or hazardous (HBr/H2 ) reagents are avoided and simple alcohols and solid Re/C catalysts in an inert atmosphere are used. At 120 °C, the carboxylic groups are protected by esterification, which prevents lactonization in the absence of water or acidic sites. Dehydroxylation and partial hydrogenation yield monohexenoates (93 %). For complete hydrogenation to adipate, a 16 % higher activation barrier necessitates higher temperatures.

Deoxygenative Transition-Metal-Promoted Reductive Coupling and Cross-Coupling of Alcohols and Epoxides

The prospective utilization of abundant, CO2-neutral, renewable feedstocks is driving the discovery and development of new reactions that refunctionalize oxygen-rich substrates such as alcohols and polyols through C–O bond activation. In this review, we highlight the development of transition-metal-promoted reactions of renewable alcohols and epoxides that result in carbon–carbon bond-formation. These include reductive self-coupling reactions and cross-coupling reactions of alcohols with alkenes and arene derivatives. Early approaches to reductive couplings employed stoichiometric amounts of low-valent transition-metal reagents to form the corresponding hydrocarbon dimers. More recently, the use of redox-active transition-metal catalysts together with a reductant has enhanced the practical applications and scope of the reductive coupling of alcohols. Inclusion of other reaction partners with alcohols such as unsaturated hydrocarbons and main-group organometallics has further expanded the diversity of carbon skeletons accessible and the potential for applications in chemical synthesis. Catalytic reductive coupling and cross-coupling reactions of epoxides are also highlighted. Mechanistic insights into the means of C–O activation and C–C bond formation, where available, are also highlighted.

1 Introduction

2 Stoichiometric Reductive Coupling of Alcohols

3 Catalytic Reductive Coupling of Alcohols

3.1 Heterogeneous Catalysis

3.2 Homogeneous Catalysis

4 Reductive Cross-Coupling of Alcohols

4.1 Reductive Alkylation

4.2 Reductive Addition to Olefins

5 Epoxide Reductive Coupling Reactions

6 Conclusions and Future Directions

Benzannulation through Ruthenium(0)-Catalyzed Transfer Hydrogenative Cycloaddition: Precision Synthesis and Photophysical Characterization of Soluble Diindenoperylenes

The first application of ruthenium(0)-catalyzed 1,2-dione-diyne [2+2+2] cycloaddition to PAH construction is achieved by the precision synthesis of soluble diindenoperylenes (DIPs), the electronic structures of which were investigated using steady-state absorption and emission, transient absorption, cyclic voltammetry and time-dependent density functional theory.

Influence of the pendant arm in deoxydehydration catalyzed by dioxomolybdenum complexes supported by amine bisphenolate ligands

Molybdenum complexes devoid of a strongly coordinating pendant arm result in enhanced catalytic activity.

Deoxydehydration of polyols catalyzed by a molybdenum dioxo-complex supported by a dianionic ONO pincer ligand

Deoxydehydration (DODH) is the net reduction of diols and polyols to alkenes or dienes and water. Molybdenum cis-dioxo bis-phenolate ONO complexes were synthesized and have been shown to be active for DODH. Catalysts were screened for activity at 150-190 °C, and appreciable yields of up to 59% were obtained. PPh₃, Na₂SO₃, Zn, C, 3-octanol and 2-propanol were screened as reductants. Additionally, the reactivities of a variety of diols were screened. With (R,R)-(+)-hydrobenzoin as substrate, DODH occurs via a mechanism where reduction of the Mo catalyst is a result of diol oxidation to form two equivalents of aldehyde. These reactions result in complete conversion and near quantitative yields of trans-stilbene and benzaldehyde.

Theoretical Study of Ruthenium(0)-Catalyzed Transfer Hydrogenative Cycloaddition of Cyclohexadiene and Norbornadiene with 1,2-Diols to Form Bridged Carbocycles

The recent success of Krische et al. ( Angew. Chem., Int. Ed. 2017 , 56 , 14667 -14671 ) in achieving a ruthenium(0)-catalyzed transfer hydrogenative cycloaddition of 1,2-diols with cyclohexadiene and norbornadiene in excellent yield with exo- and diastereoselectivity represents an exciting development in the synthesis of bridged carbocycles. In the present work, the possible catalytic mechanisms and origin of the exo- and diastereoselectivity for cyclohexadiene and norbornadiene were studied in detail by density functional theory calculations. The theoretical results indicate that the exoselective pathway for the cyclohexadiene substrate proceeds by a novel two-step successive C-C coupling, while the endoselective pathway undergoes the C-C coupling reaction in a conventional concerted manner. The origin of the preferential chemoselectivity of dione-cyclohexadiene C-C coupling over aromatization to benzene was investigated. Aromatization to benzene is unfavorable because of the large distortion energy of the three-membered ring in the transition state of hydrogen migration. From distortion/interaction analysis, for norbornadiene, the distortion energy plays the main role in determining the exoselectivity.

A Cptt-Based Trioxo-Rhenium Catalyst for the Deoxydehydration of Diols and Polyols

Trioxo-rhenium complexes are well known catalysts for the deoxydehydration (DODH) of vicinal diols (glycols). In this work, we report on the DODH of diols and biomass-derived polyols using CpttReO3 as a new catalyst (Cptt=1,3-di-tert-butylcyclopentadienyl). The DODH reaction was optimized using 2 mol % of CpttReO3 and 3-octanol as both reductant and solvent. The CpttReO3 catalyst exhibits an excellent activity for biomass-derived polyols. Specifically, glycerol is almost quantitatively converted to allyl alcohol and mucic acid gives 75 % of muconates at 91 % conversion. In addition, the loading of CpttReO3 can be reduced to 0.1 mol % to achieve a turn-over number as high as 900 per Re when using glycerol as substrate. Examination of DODH reaction profiles by NMR spectroscopy indicates that catalysis is related to Cp-ligand release, which raises questions on the nature of the actual catalyst.

Ruthenium(0)-Catalyzed Cycloaddition of 1,2-Diols, Ketols, or Diones via Alcohol-Mediated Hydrogen Transfer

Merging the characteristics of transfer hydrogenation and carbonyl addition, a broad new class of ruthenium(0)-catalyzed cycloadditions has been developed. As discussed in this Minireview, fused or bridged bicyclic ring systems are accessible in a redox-independent manner in C-C bond-forming hydrogen transfer reactions of diols, α-ketols, or 1,2-diones with diverse unsaturated reactants.

Deoxydehydration of vicinal diols and polyols catalyzed by pyridinium perrhenate salts

Simple ammonium and pyridinium perrhenate salts were evaluated as catalysts for the deoxydehydration (DODH) of diols into alkenes.

Highly Selective Deoxydehydration of Tartaric Acid over Supported and Unsupported Rhenium Catalysts with Modified Acidities

The deoxydehydration (DODH) of sugar acids to industrially important carboxylic acids is a very attractive topic. Oxorhenium complexes are the most-often employed DODH catalysts. Because of the acidity of the rhenium catalysts, the DODH products of sugar acids were usually in the form of mixture of free carboxylic acids and esters. Herein, we demonstrate strategies for the selective DODH of sugar acids to free carboxylic acids by tuning the Lewis acidity or the Brønsted acidity of the rhenium-based catalysts. Starting from tartaric acid, up to 97 % yield of free maleic acid was achieved. Based on our strategies, functional polymer immobilized heterogeneous rhenium catalysts were also developed for the selective DODH conversion of sugar acids.

Rhenium-catalyzed deoxydehydration of diols and polyols

The substitution of platform chemicals of fossil origin by biomass-derived analogues requires the development of chemical transformations capable of reducing the very high oxygen content of biomass. One such reaction, which has received increasing attention within the past five years, is the rhenium-catalyzed deoxydehydration (DODH) of a vicinal diol into an alkene; this is a model system for abundant polyols like glycerol and sugar alcohols. The present contribution includes a review of early investigations of stoichiometric reactions involving rhenium, diols, and alkenes followed by a discussion of the various catalytic systems that have been developed with emphasis on the nature of the reductant, the substrate scope, and mechanistic investigations.