Dentin-Pulp Tissue Regeneration Approaches in Dentistry: An Overview and Current Trends

Evaluation of cytotoxicity of 3.8 % SDF and BioAKT solutions on the viability of dental pulp stem cells

Introduction

Nonsurgical endodontic therapies have evolved from classic endodontic therapies to regenerative endodontic treatments (RETs) in recent years. In context of the cytotoxic activity of the most commonly used endodontic irrigant, NaOCl, newer endodontic irrigating solutions should be tested for its effective use in RETs. The aim of this trial was to examine and assess the cytotoxic response of 3.8 % SDF and BioAKT irrigating solutions on the viability of DPSCs.

Methods

The viability of DPSCs cultivated in 5.25 % NaOCl, 3.8 % SDF & BioAKT at dilutions of 1:100,1:20 &1:10 were evaluated through MTT assay after 10 min, 60 min and 24 h incubation, detection of apoptosis and ALP activity after 7,14 & 21-days incubation. A two-way analysis of variance (ANOVA) with post hoc Turkey HSD was performed to determine significant differences between the specimens tested.

Results

When compared to the control at all time periods, all test specimens at varied dilutions (1:100, 1:20, and 1:10) caused no cytotoxic effects. The maximum number of live cells and ALP activity was observed with DPSCs cultivated in BioAKT followed by 3.8 % SDF and 5.25 % NaOCl at all time intervals.

Conclusion

Different doses of 3.8 % SDF and BioAKT solution revealed encouraging outcomes when compared to 5.25 % NaOCl in terms of viability, proliferation and long-term ALP functioning potential when cultivated in DPSCs.

Exosomes derived from odontogenic stem cells: Its role in the dentin-pulp complex

Odontogenic stem cells originate from cranial neural crest cells and offer unique advantages in the regeneration of dentin-pulp complex. There is increasing evidence that stem cells exert their biological functions mainly through exosome-based paracrine effects. Exosomes contain DNA, RNA, proteins, metabolites, etc., which can play a role in intercellular communication and have similar therapeutic potential to stem cells. In addition, compared with stem cells, exosomes also have the advantages of good biocompatibility, high drug carrying capacity, easy to obtain, and few side effects. Odontogenic stem cell-derived exosomes mainly affect the regeneration of the dentin-pulp complex by regulating processes such as dentintogenesis, angiogenesis, neuroprotection and immunomodulation. This review aimed to describe "cell-free therapies" based on odontogenic stem cell-derived exosomes, which aim to regenerate the dentin-pulp complex.

Effects of phase-transited lysozyme on adhesion, migration and odontogenic differentiation of human dental pulp cells: An in vitro study

AIM

To explore the effects of phase-transited lysozyme (PTL) coated dentine slices on cell adhesion, migration and odontogenic differentiation of human dental pulp cells (HDPCs).

METHODOLOGY

Cell growth and cell cycle analysis were conducted to verify the biocompatibility of PTL for HDPCs. Cell adhesion, cell morphology and proliferation were explored by DiI staining, Scanning electron microscopy and MTT assay. Cell migration was investigated by Transwell assay. The effects of PTL on odontogenesis and mineralization of HDPCs were assessed by real-time quantitative polymerase chain reaction and Western blot. The mineralization of HDPCs was evaluated by Alizarin red staining. HDPCs were isolated from extracted third molars. The level of statistically significant difference was accepted at p < .05.

RESULTS

PTL showed no negative effect on cell cycle of HDPCs and compared with the blank group, HDPCs labelled with DiI staining showed significantly more adhered cells at 48 h (p < .05), extending cell processes and more finger-like or reticular pseudopodia on PTL-coated dentine slices. The results of MTT and Transwell assay showed that PTL promoted the proliferation (p < .05) and migration (p < .01) of HDPCs, respectively. Compared with the blank group, the gene expression of dentine sialophosphoprotein (DSPP), osteopontin and bone sialoprotein in HDPCs cultured on PTL was significantly upregulated on day 3 and 7 (p < .05), while the protein expression of DSPP showed no significant change on both day 7 and day 14. Alizarin red staining showed that PTL promoted more mineralization nodules formation of HDPCs (p < .05).

CONCLUSIONS

PTL promoted the adhesion, proliferation and migration of HDPCs on dentine slices, and positively affected odontogenic differentiation and mineralization of HDPCs.

Application of Biocompatible Scaffolds in Stem-Cell-Based Dental Tissue Engineering

Tissue engineering as an important field in regenerative medicine is a promising therapeutic approach to replace or regenerate injured tissues. It consists of three vital steps including the selection of suitable cells, formation of 3d scaffolds, and adding growth factors. Mesenchymal stem cells (MSCs) and embryonic stem cells (ESCs) are mentioned as two main sources for this approach that have been used for the treatment of various types of disorders. However, the main focus of literature in the field of dental tissue engineering is on utilizing MSCs. On the other hand, biocompatible scaffolds play a notable role in this regenerative process which is mentioned to be harmless with acceptable osteoinductivity. Their ability in inhibiting inflammatory responses also makes them powerful tools. Indeed, stem cell functions should be supported by biomaterials acting as scaffolds incorporated with biological signals. Naturally derived polymeric scaffolds and synthetically engineered polymeric/ceramic scaffolds are two main types of scaffolds regarding their materials that are defined further in this review. Various strategies of tissue bioengineering can affect the regeneration of dentin-pulp complex, periodontium regeneration, and whole teeth bioengineering. In this regard, in vivo/ex vivo experimental models have been developed recently in order to perform preclinical studies of dental tissue engineering which make it more transferable to be used for clinic uses. This review summarizes dental tissue engineering through its different components. Also, strategies of tissue bioengineering and experimental models are introduced in order to provide a perspective of the potential roles of dental tissue engineering to be used for clinical aims.

Dentin regeneration based on tooth tissue engineering: A review

Missing or damaged teeth due to caries, genetic disorders, oral cancer, or infection may contribute to physical and mental impairment that reduces the quality of life. Despite major progress in dental tissue repair and those replacing missing teeth with prostheses, clinical treatments are not yet entirely satisfactory, as they do not regenerate tissues with natural teeth features. Therefore, much of the focus has centered on tissue engineering (TE) based on dental stem/progenitor cells to create bioengineered dental tissues. Many in vitro and in vivo studies have shown the use of cells in regenerating sections of a tooth or a whole tooth. Tooth tissue engineering (TTE), as a promising method for dental tissue regeneration, can form durable biological substitutes for soft and mineralized dental tissues. The cell-based TE approach, which directly seeds cells and bioactive components onto the biodegradable scaffolds, is currently the most potential method. Three essential components of this strategy are cells, scaffolds, and growth factors (GFs). This study investigates dentin regeneration after an injury such as caries using TE and stem/progenitor cell-based strategies. We begin by discussing about the biological structure of a dentin and dentinogenesis. The engineering of teeth requires knowledge of the processes that underlie the growth of an organ or tissue. Then, the three fundamental requirements for dentin regeneration, namely cell sources, GFs, and scaffolds are covered in the current study, which may ultimately lead to new insights in this field.

Effects of calcium silicate-based cements on odonto/osteogenic differentiation potential in mesenchymal stem cells

The objective of this study was to evaluate the biological effects and odonto/osteogenic differentiation potential of Biodentine, NeoMTA Plus and TheraCal LC in tooth germ-derived stem cells (TGSCs). TGSCs were exposed to the material extracts. Biocompatibility was tested with MTS cell proliferation assay. Odonto/osteogenic differentiation was assessed with alkaline phosphatase (ALP) activity and mRNA gene expressions (RUNX2, DSPP and DMP-1). Scanning electronic microscopy/energy-dispersive X-ray (SEM/EDX) analysis and pH analysis were also performed for the materials. Data were evaluated using the one-way ANOVA and Tukey's tests. TGSCs remained viable after 7 days of incubation with all tested materials. Biodentine and NeoMTA Plus showed high ALP activity and increased expression of RUNX2, DSPP and DMP-1 compared to that of TheraCal LC. All materials can induce odonto/osteogenic differentiation of MSCs in various levels. Biocompatibility and odonto/osteogenic differentiation potential of Biodentine and NeoMTA Plus are similar and superior to that of TheraCal LC.

The cytotoxic effects of various endodontic irrigants on the viability of dental mesenchymal stem cells

This study aimed to evaluate cytotoxic effects of various irrigation solutions used in regenerative endodontic treatments (RETs) on mesenchymal stem cells, and further examine the long-term effect of hypochlorous acid (HOCl) on the cell viability and alkaline phosphatase (ALP) activity. Stem cells were exposed to various concentrations of NaOCl, EDTA, chlorhexidine (CHX), etidronic acid (HEDP)/NaOCl combination and HOCl. HOCl was tested for its effects on ALP activity up to 21 days. Additionally, cell viability was measured fluorescently using calcein AM. The most cytotoxic irrigant was CHX even with the lowest concentration. NaOCl and HEDP/NaOCl with 1:100 dilution decreased viability to around 40%. HOCl showed the lowest cytotoxicity among all tested irrigants. HOCl also showed no significant reduction in ALP activity compared with the controls. The cytotoxicity of endodontic irrigants was time and concentration dependent. HOCl demonstrated promising results regarding viability and ALP activity, since RETs require host stem cell survival.

Expression of nitric oxide synthases in rat odontoblasts and the role of nitric oxide in odontoblastic differentiation of rat dental papilla cells

As precursor cells of odontoblasts, dental papilla cells (DPCs) form the dentin-pulp complex during tooth development. Nitric oxide (NO) regulates the functions of multiple cells and organ tissues, including stem cell differentiation and bone formation. In this paper, we explored the involvement of NO in odontoblastic differentiation. We verified the expression of NO synthase (NOS) in rat odontoblasts by nicotinamide adenine dinucleotide phosphate-diaphorase (NADPH-d) staining and immunohistochemistry in vivo. The expression of all three NOS isoforms in rat DPCs was confirmed by quantitative reverse-transcription polymerase chain reaction (qRT-PCR), immunofluorescence, and western blotting in vitro. The expression of neuronal NOS and endothelial NOS was upregulated during the odontoblastic differentiation of DPCs. Inhibition of NOS function by NOS inhibitor l-N^G -monomethyl arginine (L-NMMA) resulted in reduced formation of mineralized nodules and expression of dentin sialophosphoprotein (DSPP) and dentin matrix protein (DMP1) during DPC differentiation. The NO donor S-nitroso-N-acetylpenicillamine (SNAP, 0.1, 1, 10, and 100 μM) promoted the viability of DPCs. Extracellular matrix mineralization and odontogenic markers expression were elevated by SNAP at low concentrations (0.1, 1, and 10 μM) and suppressed at high concentration (100 μM). Blocking the generation of cyclic guanosine monophosphate (cGMP) with 1H-(1,2,4)oxadiazolo-(4,3-a)quinoxalin-1-one (ODQ) abolished the positive influence of SNAP on the odontoblastic differentiation of DPCs. These findings demonstrate that NO regulates the odontoblastic differentiation of DPCs, thereby influencing dentin formation and tooth development.

The effects and potential applications of concentrated growth factor in dentin-pulp complex regeneration

The dentin-pulp complex is essential for the long-term integrity and viability of teeth but it is susceptible to damage caused by external factors. Because traditional approaches for preserving the dentin-pulp complex have various limitations, there is a need for novel methods for dentin-pulp complex reconstruction. The development of stem cell-based tissue engineering has given rise to the possibility of combining dental stem cells with a tissue-reparative microenvironment to promote dentin-pulp complex regeneration. Concentrated growth factor, a platelet concentrate, is a promising scaffold for the treatment of dentin-pulp complex disorders. Given its characteristics of autogenesis, convenience, usability, and biodegradability, concentrated growth factor has gained popularity in medical and dental fields for repairing bone defects and promoting soft-tissue healing. Numerous in vitro studies have demonstrated that concentrated growth factor can promote the proliferation and migration of dental stem cells. Here, we review the current state of knowledge on the effects of concentrated growth factor on stem cells and its potential applications in dentin-pulp complex regeneration.

Large three-dimensional cell constructs for tissue engineering

Much research has been conducted on fabricating biomimetic biomaterials in vitro. Tissue engineering approaches are often conducted by combining cells, scaffolds, and growth factors. However, the degradation rate of scaffolds is difficult to control and the degradation byproducts occasionally limit tissue regeneration. To overcome these issues, we have developed a novel system using a thermo-responsive hydrogel that forms scaffold-free, three-dimensional (3D) cell constructs with arbitrary size and morphology. 3D cell constructs prepared using bone marrow-derived stromal stem cells (BMSCs) exhibited self-organizing ability and formed bone-like tissue with endochondral ossification. Endothelial cells were then introduced into the BMSC construct and a vessel-like structure was formed within the constructs. Additionally, the bone formation ability was promoted by endothelial cells and cell constructs could be freeze-dried to improve their clinical application. A pre-treatment with specific protein protectant allowed for the fabrication of novel bone substitutes composed only of cells. This 3D cell construct technology using thermo-responsive hydrogels was then applied to other cell species. Cell constructs composed of dental pulp stem cells were fabricated, and the resulting construct regenerated pulp-like tissue within a human pulpless tooth. In this review, we demonstrate the approaches for the in vitro fabrication of bone and dental pulp-like tissue using thermo-responsive hydrogels and their potential applications.