Forces During Cell Adhesion and Spreading: Implications for Cellular Homeostasis

Simulation and in vivo experimentation predict AdamTS-A location of function during caudal visceral mesoderm (CVM) migration in Drosophila

BACKGROUND

Caudal visceral mesoderm (CVM) cells migrate as a loose collective along the trunk visceral mesoderm (TVM) and are surrounded by extracellular matrix (ECM). In this study, we examined how one extracellular protease, AdamTS-A, facilitates CVM migration.

RESULTS

A comparison of mathematical simulation to experimental results suggests that location of AdamTS-A action in CVM cells is on the sides of the cell not in contact with the TVM, predominantly at the CVM-ECM interface. CVM migration from a top-down view showed CVM cells migrating along the outside of the TVM substrate in the absence of AdamTS-A. Moreover, over-expression of AdamTS-A resulted in similar, but milder, mis-migration of the CVM. These results contrast with the salivary gland where AdamTS-A is proposed to cleave connections at the trailing edge of migrating cells. Subcellular localization of GFP-tagged AdamTS-A suggests this protease is not limited to functioning at the trailing edge of CVM cells.

CONCLUSION

Using both in vivo experimentation and mathematical simulations, we demonstrated that AdamTS-A cleaves connections between CVM cells and the ECM on all sides not attached to the TVM. Clearly, AdamTS-A has a more expansive role around the entire cell in cleaving cell-ECM attachments in cells migrating as a loose collective. This article is protected by copyright. All rights reserved.

Actomyosin-dependent invasion of endothelial sprouts in collagen

During sprouting angiogenesis-the growth of blood vessels from the existing vasculature-endothelial cells (ECs) adopt an elongated invasive form and exert forces at cell-cell and cell-matrix interaction sites. These cell shape changes and cellular tractions require extensive reorganizations of the actomyosin network. However, the respective roles of actin and myosin for endothelial sprouting are not fully elucidated. In this study, we further investigate these roles by treating 2D-migrating and 3D-sprouting ECs with chemical compounds targeting either myosin or actin. These treatments affected the endothelial cytoskeleton drastically and reduced the invasive response in a compound-specific manner; pointing toward a tight control of the actin and myosin activity during sprouting. Clusters in the data further illustrate that endothelial sprout morphology is sensitive to the in vitro model mechanical microenvironment and directs future research toward mechanical substrate guidance as a strategy for promoting engineered tissue vascularization. In summary, our results add to a growing corpus of research highlighting a key role of the cytoskeleton for sprouting angiogenesis.

A novel personalized 3D injectable protein scaffold for regenerative medicine

Biomaterials should be designed to closely resemble the characteristics and functions of the native extracellular matrix to provide mechanical support and signals to direct biological events. Here we have developed a novel injectable plasma rich in growth factors (PRGF-Endoret)-based formulation that combines a thermal-denaturation step of plasma with an autologous fibrin crosslinking. Rheological and mechanical properties were evaluated. Additionally, the microstructure and biological capacity of the biomaterial was also characterized. This novel formulation exhibited ideal mechanical properties and a gel-like behavior with the ability to progressively release its growth factor load over time. The results also suggested that the novel injectable formulation is non-cytotoxic, biocompatible and suitable for cell ingrowth as it is deduced from the fibroblast proliferation within the scaffold. Finally, stimulation of both cell proliferation and matrix proteins synthesis demonstrated the regenerative potential of this autologous protein based injectable scaffold.

3D porous polyurethanes featured by different mechanical properties: Characterization and interaction with skeletal muscle cells

The fabrication of biomaterials for interaction with muscle cells has attracted significant interest in the last decades. However, 3D porous scaffolds featured by a relatively low stiffness (almost matching the natural muscle one) and highly stable in response to cyclic loadings are not available at present, in this context. This work describes 3D polyurethane-based porous scaffolds featured by different mechanical properties. Biomaterial stiffness was finely tuned by varying the cross-linking degree of the starting foam. Compression tests revealed, for the softest material formulation, stiffness values close to the ones possessed by natural skeletal muscles. The materials were also characterized in terms of local nanoindenting, rheometric properties and long-term stability through cyclic compressions, in a strain range reflecting the contraction extent of natural muscles. Preliminary in vitro tests revealed a preferential adhesion of C2C12 skeletal muscle cells over the softer, rougher and more porous structures. All the material formulations showed low cytotoxicity.

Adhesive force between graphene nanoscale flakes and living biological cells

We report on a measurement technique that quantifies the adhesive force between multi-layers of graphene flakes and the cell wall of live Escherichia coli cells using atomic force microscopy (AFM) in-fluid Peak Force- Quantitative Nanomechanical Mapping mode. To measure the adhesive force, we made use of the negative charge of E. coli cells to allow them to stick to positively charged surfaces, such as glass or silicon, that were covered by poly-L-Lysine. With this approach, cells were held in place for AFM characterization. Both pristine graphene (PG) flakes and functionalized graphene (FG) flakes were put on the E. coli cells and measurements of lateral size, flake thickness, and adhesion were made. Using this approach, the measured values of the adhesive force between multi-layers of graphene flakes (total thickness of 50 nm) and E. coli was determined to be equal or greater than 431 ± 65pN for (PG) and 694 ± 98pN for the (FG). More interestingly, the adhesive force of a graphene flake (thickness 1.3 nm) with the cell is determined to be equal or greater than 38.2 ± 16.4pN for the (PG) and 34.8 ± 15.3pN for the (FG). These interaction values can play an important role in determining and understanding the possible toxicity of graphene flakes. Copyright © 2017 John Wiley & Sons, Ltd.

Determining the Time Window for Dynamic Nanowire Cell Penetration Processes

Nanowire (NW) arrays offer opportunities for parallel, nondestructive intracellular access for biomolecule delivery, intracellular recording, and sensing. Spontaneous cell membrane penetration by vertical nanowires is essential for these applications, yet the time- and geometry-dependent penetration process is still poorly understood. In this work, the dynamic NW-cell interface during cell spreading was examined through experimental cell penetration measurements combined with two mechanical models based on substrate adhesion force or cell traction forces. Penetration was determined by comparing the induced tension at a series of given membrane configurations to the critical membrane failure tension. The adhesion model predicts that penetration occurs within a finite window shortly after initial cell contact and adhesion, while the traction model predicts increasing penetration over a longer period. NW penetration rates determined from a cobalt ion delivery assay are compared to the predicted results from the two models. In addition, the effects of NW geometry and cell properties are systematically evaluated to identify the key factors for penetration.

Rap1 signaling in endothelial barrier control

The small G-protein Rap1 plays an important role in the regulation of endothelial barrier function, a process controlled largely by cell–cell adhesions and their connection to the actin cytoskeleton. During the various stages of barrier dynamics, different guanine nucleotide exchange factors (GEFs) control Rap1 activity, indicating that Rap1 integrates multiple input signals. Once activated, Rap1 induces numerous signaling cascades, together responsible for the increased endothelial barrier function. Most notably, Rap1 activation results in the inhibition of Rho to decrease radial stress fibers and the activation of Cdc42 to increase junctional actin. This implies that Rap regulates endothelial barrier function by dual control of cytoskeletal tension. The molecular details of the signaling pathways are becoming to be elucidated.

The extracellular protease stl functions to inhibit migration of v'ch1 sensory neuron during Drosophila embryogenesis

Proper migration of cells through the dense and complex extracellular matrix (ECM) requires constant restructuring of the ECM to allow cells to move forward in a smooth manner. This restructuring can occur through the action of extracellular enzymes. Among these extracellular enzymes is the ADAMTS (A Disintegrin And Metalloprotease with ThromboSpondin repeats) family of secreted extracellular proteases. Drosophila stl encodes an ADAMTS protease expressed in and around the peripheral nervous system (PNS) during embryogenesis. The absence of stl displayed one specific neuron, the v'ch1 sensory neuron, migrating to its target sooner than in wild type. During normal development, the v'ch1 sensory neuron migrates dorsally at the same time it is extending an axon ventrally toward the CNS. Surprisingly, in the absence of stl, the v'ch1 neuron migrated further dorsally as compared to the wild type at stage 15, but did not migrate past its correct target at stage 16, suggesting a novel role for this extracellular protease in inhibiting migration of this neuron past a certain point.

Rasip1 mediates Rap1 regulation of Rho in endothelial barrier function through ArhGAP29

Rap1 is a small GTPase regulating cell-cell adhesion, cell-matrix adhesion, and actin rearrangements, all processes dynamically coordinated during cell spreading and endothelial barrier function. Here, we identify the adaptor protein ras-interacting protein 1 (Rasip1) as a Rap1-effector involved in cell spreading and endothelial barrier function. Using Förster resonance energy transfer, we show that Rasip1 interacts with active Rap1 in a cellular context. Rasip1 mediates Rap1-induced cell spreading through its interaction partner Rho GTPase-activating protein 29 (ArhGAP29), a GTPase activating protein for Rho proteins. Accordingly, the Rap1-Rasip1 complex induces cell spreading by inhibiting Rho signaling. The Rasip1-ArhGAP29 pathway also functions in Rap1-mediated regulation of endothelial junctions, which controls endothelial barrier function. In this process, Rasip1 cooperates with its close relative ras-association and dilute domain-containing protein (Radil) to inhibit Rho-mediated stress fiber formation and induces junctional tightening. These results reveal an effector pathway for Rap1 in the modulation of Rho signaling and actin dynamics, through which Rap1 modulates endothelial barrier function.

Mechanical model of vertical nanowire cell penetration

Direct access into cells' interiors is essential for biomolecular delivery, gene transfection, and electrical recordings yet is challenging due to the cell membrane barrier. Recently, molecular delivery using vertical nanowires (NWs) has been demonstrated for introducing biomolecules into a large number of cells in parallel. However, the microscopic understanding of how and when the nanowires penetrate cell membranes is still lacking, and the degree to which actual membrane penetration occurs is controversial. Here we present results from a mechanical continuum model of elastic cell membrane penetration through two mechanisms, namely through "impaling" as cells land onto a bed of nanowires, and through "adhesion-mediated" penetration, which occurs as cells spread on the substrate and generate adhesion force. Our results reveal that penetration is much more effective through the adhesion mechanism, with NW geometry and cell stiffness being critically important. Stiffer cells have higher penetration efficiency, but are more sensitive to NW geometry. These results provide a guide to designing nanowires for applications in cell membrane penetration.