Monomolecular layers in the study of biomembranes

Molecular model for the solubilization of membranes into nanodisks by styrene maleic Acid copolymers

A recent discovery in membrane research is the ability of styrene-maleic acid (SMA) copolymers to solubilize membranes in the form of nanodisks allowing extraction and purification of membrane proteins from their native environment in a single detergent-free step. This has important implications for membrane research because it allows isolation as well as characterization of proteins and lipids in a near-native environment. Here, we aimed to unravel the molecular mode of action of SMA copolymers by performing systematic studies using model membranes of varying compositions and employing complementary biophysical approaches. We found that the SMA copolymer is a highly efficient membrane-solubilizing agent and that lipid bilayer properties such as fluidity, thickness, lateral pressure profile, and charge density all play distinct roles in the kinetics of solubilization. More specifically, relatively thin membranes, decreased lateral chain pressure, low charge density at the membrane surface, and increased salt concentration promote the speed and yield of vesicle solubilization. Experiments using a native membrane lipid extract showed that the SMA copolymer does not discriminate between different lipids and thus retains the native lipid composition in the solubilized particles. A model is proposed for the mode of action of SMA copolymers in which membrane solubilization is mainly driven by the hydrophobic effect and is further favored by physical properties of the polymer such as its relatively small cross-sectional area and rigid pendant groups. These results may be helpful for development of novel applications for this new type of solubilizing agent, and for optimization of the SMA technology for solubilization of the wide variety of cell membranes found in nature.

Investigation of interfacial behavior of glycyrrhizin with a lipid raft model via a Langmuir monolayer study

An interaction of glycyrrhizin (GC) with a lipid raft biomembrane model that consisted of N-palmitoyl-d-erythro-sphingosylphosphorylcholine (PSM), 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), and cholesterol (CHOL) was systematically studied using the Langmuir monolayer technique. To construct the lipid raft model, the surface pressure (π)–molecular area (A) and surface potential (ΔV)–A isotherms for three-component (PSM/DOPC/CHOL) systems on 0.02 M Tris buffer with 0.13 M NaCl (pH 7.4) were primarily measured by changing their compositions. Thermodynamic and interaction parameters for binary PSM/DOPC and PSM/CHOL systems revealed that PSM interacts more strongly with CHOL than with DOPC. In addition, a morphological analysis performed with Brewster angle microscopy (BAM) and fluorescence microscopy (FM) revealed an optimal ratio of PSM/DOPC/CHOL (1/1/1, by mole) as a model of lipid rafts. Second, the interaction of GC with the ternary PSM/DOPC/CHOL monolayers was investigated on Tris buffer solutions containing different GC concentrations (1, 5, 10, 25, and 50 μM). In BAM and FM images, microdomains were found to become smaller by increasing the GC concentration in the subphase, suggesting that GC regulates the size of raft domains, which provide dynamic scaffolding for numerous cellular processes. More interestingly, the distinctive GC striped regions were formed at the interface at 50 μM, which shows that GC divides the ternary monolayer into pieces. This phenomenon was observed only in the presence of CHOL in the monolayer. These results suggest that CHOL plays an essential role in the interaction with GC, which results in one of the major activities associated with saponins' membrane disruption.

Kinase associated-1 domains drive MARK/PAR1 kinases to membrane targets by binding acidic phospholipids

Phospholipid-binding modules such as PH, C1, and C2 domains play crucial roles in location-dependent regulation of many protein kinases. Here, we identify the KA1 domain (kinase associated-1 domain), found at the C terminus of yeast septin-associated kinases (Kcc4p, Gin4p, and Hsl1p) and human MARK/PAR1 kinases, as a membrane association domain that binds acidic phospholipids. Membrane localization of isolated KA1 domains depends on phosphatidylserine. Using X-ray crystallography, we identified a structurally conserved binding site for anionic phospholipids in KA1 domains from Kcc4p and MARK1. Mutating this site impairs membrane association of both KA1 domains and intact proteins and reveals the importance of phosphatidylserine for bud neck localization of yeast Kcc4p. Our data suggest that KA1 domains contribute to "coincidence detection," allowing kinases to bind other regulators (such as septins) only at the membrane surface. These findings have important implications for understanding MARK/PAR1 kinases, which are implicated in Alzheimer's disease, cancer, and autism.

Influence of melatonin on the order of phosphatidylcholine-based membranes

The effect of melatonin was evaluated on three phosphatidylcholine-based membrane models. Changes in liposome dynamics were monitored by fluorescence, following the response of the probe merocyanine-540, as well as by differential scanning calorimetry (DSC). Langmuir monolayers were investigated using molecular area measurements, as well as by Brewster angle microscopy (BAM). Mica-supported bilayers were observed via atomic force microscopy (AFM). Fluorescence results demonstrating that melatonin increases the affinity between MC-540 and lipid molecules possibly because of an increase in the membrane fluidity in liposomes. DSC analyses showed that melatonin promoted a reduction in enthalpy in the lipid nonpolar chains. Melatonin also promoted an increase in the molecular area of Langmuir monolayers, as well as a decrease in membrane thickness. Consequently, melatonin appeared to induce re-ordering effects in liposome and Langmuir monolayers. AFM images of bilayers immobilized on mica suggested that melatonin induced a gel state predominance or a delay in the main phase transition. At experimental conditions, melatonin interacted actively with all membranes models tested and induced changes in their physico-chemical properties. The data presented here may contribute to the understanding of melatonin physiologic properties, as well as the development of therapeutic advanced systems, such as drug delivery systems and biosensors.

Structure of ceramide-1-phosphate at the air-water solution interface in the absence and presence of Ca2+

Ceramide-1-phosphate, the phosphorylated form of ceramide, gained attention recently due to its diverse intracellular roles, in particular in inflammation mediated by cPLA(2)alpha. However, surprisingly little is known about the physical chemical properties of this lipid and its potential impact on physiological function. For example, the presence of Ca(2+) is indispensable for the interaction of Cer-1-P with the C2 domain of cPLA(2)alpha. We report on the structure and morphology of Cer-1-P in monomolecular layers at the air/water solution interface in the absence and presence of Ca(2+) using diverse biophysical techniques, including synchrotron x-ray reflectivity and grazing angle diffraction, to gain insight into the role and function of Cer-1-P in biomembranes. We show that relatively small changes in pH and the presence of monovalent cations dramatically affect the behavior of Cer-1-P. On pure water Cer-1-P forms a solid monolayer despite the negative charge of the phosphomonoester headgroup. In contrast, pH 7.2 buffer yields a considerably less solid-like monolayer, indicating that charge-charge repulsion becomes important at higher pH. Calcium was found to bind strongly to the headgroup of Cer-1-P even in the presence of a 100-fold larger Na(+) concentration. Analysis of the x-ray reflectivity data allowed us to estimate how much Ca(2+) is bound to the headgroup, approximately 0.5 Ca(2+) and approximately 1.0 Ca(2+) ions per Cer-1-P molecule for the water and buffer subphase respectively. These results can be qualitatively understood based on the molecular structure of Cer-1-P and the electrostatic/hydrogen-bond interactions of its phosphomonoester headgroup. Biological implications of our results are also discussed.

Membrane Association of the Cycling Peroxisome Import Receptor Pex5p

Peroxisomal proteins carrying a peroxisome targeting signal type 1 (PTS1) are recognized in the cytosol by the cycling import receptor Pex5p. The receptor-cargo complex docks at the peroxisomal membrane where it associates with multimeric protein complexes, referred to as the docking and RING finger complexes. Here we have identified regions within the Saccharomyces cerevisiae Pex5p sequence that interconnect the receptor-cargo complex with the docking complex. Site-directed mutagenesis of the conserved tryptophan residue within a reverse WXXXF motif abolished two-hybrid binding with the N-terminal half of Pex14p. In combination with an additional mutation introduced into the Pex13p-binding site, we generated a Pex5p mutant defective in a stable association not only with the docking complex but also with the RING finger peroxins at the membrane. Surprisingly, PTS1 proteins are still imported into peroxisomes in these mutant cells. Because these mutations had no significant effect on the membrane binding properties of Pex5p, we examined yeast and human Pex5p for intrinsic lipid binding activity. In vitro analyses demonstrated that both proteins have the potential to insert spontaneously into phospholipid membranes. Altogether, these data strongly suggest that a translocation-competent state of the PTS1 receptor enters the membrane via protein-lipid interactions before it tightly associates with other peroxins.

Membrane activity of the phospholipase C-delta1 pleckstrin homology (PH) domain

PH-PLCdelta1 [the PH domain (pleckstrin homology domain) of PLCdelta1 (phospholipase C-delta1)] is among the best-characterized phosphoinositide-binding domains. PH-PLCdelta1 binds with high specificity to the headgroup of PtdIns(4,5)P2, but little is known about its interfacial properties. In the present study, we show that PH-PLCdelta1 is also membrane-active and can insert significantly into PtdIns(4,5)P2-containing monolayers at physiological (bilayer-equivalent) surface pressures. However, this membrane activity appears to involve interactions distinct from those that target PH-PLCdelta1 to the PtdIns(4,5)P2 headgroup. Whereas the majority of PtdIns(4,5)P2-bound PH-PLCdelta1 can be displaced by adding excess of soluble headgroup [Ins(1,4,5)P3], membrane activity of PH-PLCdelta1 cannot. PH-PLCdelta1 differs from other phosphoinositide-binding domains in that its membrane insertion does not require that the phosphoinositide-binding site be occupied. Significant monolayer insertion remains when the phosphoinositide-binding site is mutated, and PH-PLCdelta1 can insert into monolayers that contain no PtdIns(4,5)P2 at all. Our results suggest a model in which reversible membrane binding of PH-PLCdelta1, mediated by PtdIns(4,5)P2 or other acidic phospholipids, occurs without membrane insertion. Accumulation of the PH domain at the membrane surface enhances the efficiency of insertion, but does not significantly affect its extent, whereas the presence of phosphatidylethanolamine and cholesterol in the lipid mixture promotes the extent of insertion. This is the first report of membrane activity in an isolated PH domain and has implications for understanding the membrane targeting by this common type of domain.

Islet amyloid polypeptide inserts into phospholipid monolayers as monomer

Amyloid deposits in the pancreatic islets of Langerhans are thought to be a main factor responsible for death of the insulin-producing islet beta-cells in type 2 diabetes. It is hypothesized that beta-cell death is related to interaction of the 37 amino acid residue human islet amyloid polypeptide (hIAPP), the major constituent of islet amyloid, with cellular membranes. However, the mechanism of hIAPP-membrane interactions is largely unknown. Here, we study the nature and the molecular details of the initial step of hIAPP-membrane interactions by using the monolayer technique. It is shown that both freshly dissolved hIAPP and the non-amyloidogenic mouse IAPP (mIAPP) have a pronounced ability to insert into phospholipid monolayers, even at lipid packing conditions that exceed the conditions that occur in biological membranes. In contrast, the fibrillar form of hIAPP has lost the ability to insert. These results, combined with the observations that both the insertion kinetics and the dependence of insertion on the initial surface pressure are similar for freshly dissolved hIAPP and mIAPP, indicate that hIAPP inserts into phospholipid monolayers most likely as a monomer. In addition, our results suggest that the N-terminal part of hIAPP, which is nearly identical with that of mIAPP, is largely responsible for insertion. This is supported by experiments with hIAPP fragments, which show that a peptide consisting of the 19 N-terminal residues of hIAPP efficiently inserts into phospholipid monolayers, whereas an amyloidogenic decapeptide, consisting of residues 20-29 of hIAPP, inserts much less efficiently. The results obtained here suggest that hIAPP monomers might insert with high efficiency in biological membranes in vivo. This process could play an important role as a first step in hIAPP-induced membrane damage in type 2 diabetes.

Enzyme association with lipidic Langmuir-Blodgett films: interests and applications in nanobioscience

This review presents the recent advances in the achievement of organized proteo-lipidic nanostructures based on Langmuir-Blodgett technology and their potential applications in the nanobioscience area. By using the self-assembled properties of amphiphilic biomolecules at the air-water interface, the Langmuir-Blodgett (LB) technique offers the possibility to prepare ultrathin layers suitable for biomolecule immobilization at the molecular level. This review will provide a general overview of the enzyme association with preformed Langmuir-Blodgett films in connection with their potential applications in biosensing device developments, and then introduce the design of a new functionalised biomimetic nanostructure with oriented recognition site. The potential applications of such an organized proteo-lipidic nanostructure for biocatalysis investigations of an immobilised enzyme in a biomimetic situation and for the development of bioelectronic devices are finally discussed.

Insertion behavior of the Bacillus thuringiensis Cry4Ba insecticidal protein into lipid monolayers

Toxicity mechanisms of Bacillus thuringiensis Cry insecticidal proteins involve membrane insertion and lytic pore formation in lipid bilayers of the target larval midgut cell membranes. The B. thuringiensis Cry4Ba mosquito-larvicidal protein has been shown to be capable of permeabilizing liposome vesicles and of forming ion channels in planar lipid bilayers. Here, the membrane interaction of the 65-kDa activated Cry4Ba protein with the lipid monolayers, comprising dipalmitoyl phosphatidylcholine, dioleoyl phosphatidylethanolamine, and cholesterol (Chol), was studied using Langmuir-Blodgett technique. The interactions of the Cry4Ba protein with the lipid monolayers were measured from the surface pressure versus area isotherms of the protein-lipid monolayers. The increase in the mean molecular area was demonstrated as an incorporation of the protein into lipid monolayers. The insertion of the Cry4Ba protein was monitored by measuring as an increase of the surface pressure at constant molecular area. For a given monolayer, the membrane insertion of the Cry4Ba reduced as the initial surface pressure increased. The Cry4Ba protein showed a strong preference of an insertion towards a Chol monolayer. In addition, the mixed monolayers of Chol showed an enhanced effect on the insertion kinetics of Cry4Ba into lipid films, suggesting its involvement in the modulation of the protein insertion. These findings provide the first evidence that the Cry4Ba protein is capable of inserting itself into lipid monolayers, depending on the packing density of the monolayers. Our results also indicate that only a limited part of the protein is likely to be involved in the insertion.

Insertion of the amyloid precursor protein into lipid monolayers: effects of cholesterol and apolipoprotein E

APP (amyloid precursor protein), together with Chol (cholesterol) and ApoE (apolipoprotein E), has been linked to Alzheimer's disease. We have examined the hypothesis that interaction of APP with the lipid membranes is modulated by Chol and ApoE. Insertion of APP into lipid monolayers was first evidenced as an increase in the surface pressure. APP injected into a subphase induced a substantial increase in the surface pressure of monolayers prepared from PC (L-alpha-phosphatidylcholine), Chol, SPM (sphingomyelin) and PS (L-alpha-phosphatidylserine), the major lipids present in the plasma membranes of brain cells. At a given initial pressure, the insertion of APP into expanded monolayers is higher than that in condensed monolayers, in the order Chol>PC>SPM>PS. The membrane insertion capacity of APP was also measured from surface pressure versus area (pi-A) isotherms of APP-lipid monolayers. The increase in the mean area per molecule in protein-lipid monolayers, in the order PC>Chol>PS>SPM, provides further evidence for protein-lipid interactions. These interactions occurred at optimum salt levels and optimum pH values close to physiological conditions (150 mM NaCl and pH 7.4). In addition, ApoE4 affected the insertion of APP into lipid films. APP-ApoE complexes showed a decreased ability to penetrate lipid monolayers at a constant area. APP-ApoE complexes expanded the pi-A isotherm of a Chol monolayer to a lesser extent than APP alone. These experiments demonstrate the roles of Chol and ApoE in the modulation of membrane insertion of APP.

The role of the abundant phenylalanines in the mode of action of the antimicrobial peptide clavanin

Clavanin A is a special antimicrobial peptide that acts at the level of the membrane via a pH-dependent mechanism. At neutral pH, clavanin disrupts biological and model membranes in a nonspecific manner, causing efflux of large molecules. At mildly acidic conditions, however, the peptide efficiently kills bacteria by permeabilizing their membrane most likely by interacting with proteins involved in proton translocation [Biochemistry 41 (2002) 7529]. Clavanin A is unusually rich in phenylalanines with 5 out of 23 residues, which suggests that these residues are functionally important. A set of mutants, in which all Phe residues are replaced by either Ile, Leu, Trp, or Tyr was used to investigate the role of these amino acids. The antimicrobial activities of the different peptides both at neutral and low pH show that the presence of phenylalanine is not essential nor optimal, as the Trp, Leu, and Ile mutant are equally or more active than the wild-type component. In general, at neutral pH, the biological activities correlate well with the peptides' ability to interact with membrane lipids. Correspondingly, the permeabilization efficiencies of biological and model membranes of the various derivatives were found to be closely related to their ability to adopt alpha-helical structures, and follows the order 5L>5W>5I>5Y>wild type. The results suggest an important role for the Phe residues, in providing the peptide in a balanced manner with sufficient hydrophobicity, and therewith membrane affinity, as well as conformational flexibility.

Heat shock protein coinducers with no effect on protein denaturation specifically modulate the membrane lipid phase

The hydroxylamine derivative bimoclomol (BM) has been shown to activate natural cytoprotective homeostatic responses by enhancing the capability of cells to cope with various pathophysiological conditions. It exerts its effect in synergy with low levels of stress to induce the synthesis of members of major stress protein families. We show here that the presence of BM does not influence protein denaturation in the cells. BM and its derivatives selectively interact with acidic lipids and modulate their thermal and dynamic properties. BM acts as a membrane fluidizer at normal temperature, but it is a highly efficient membrane stabilizer, inhibiting the bilayer-nonbilayer phase transitions during severe heat shock. We suggest that BM and the related compounds modify those domains of membrane lipids where the thermally or chemically induced perturbation of lipid phase is sensed and transduced into a cellular signal, leading to enhanced activation of heat shock genes. BM may be a prototype for clinically safe membrane-interacting drug candidates that rebalance the level and composition of heat shock proteins.

Aerobic sn-glycerol-3-phosphate dehydrogenase from Escherichia coli binds to the cytoplasmic membrane through an amphipathic alpha-helix

sn-Glycerol-3-phosphate dehydrogenase (GlpD) from Escherichia coli is a peripheral membrane enzyme involved in respiratory electron transfer. For it to display its enzymic activity, binding to the inner membrane is required. The way the enzyme interacts with the membrane and how this controls activity has not been elucidated. In the present study we provide evidence for direct protein-lipid interaction. Using the monolayer technique, we observed insertion of GlpD into lipid monolayers with a clear preference for anionic phospholipids. GlpD variants with point mutations in their predicted amphipathic helices showed a decreased ability to penetrate anionic phospholipid monolayers. From these data we propose that membrane binding of GlpD occurs by insertion of an amphipathic helix into the acyl-chain region of lipids mediated by negatively charged phospholipids.

Spontaneous insertion of gene 9 minor coat protein of bacteriophage M13 in model membranes

Gene 9 minor coat protein from bacteriophage M13 is known to be located in the inner membrane after phage infection of Escherichia coli. The way of insertion of this small protein (32 amino acids) into membranes is still unknown. Here we show that the protein is able to insert in monolayers. The limiting surface pressure of 35 mN/m for 1,2-dioleoyl-sn-glycero-3-phosphocholine and 1,2-dioleoyl-sn-glycero-3-phosphoglycerol lipid systems indicates that this spontaneous insertion can also occur in vivo. By carboxyfluorescein leakage experiments of vesicles it is demonstrated that protein monomers, or at least small aggregates, are more effective in releasing carboxyfluorescein than highly aggregated protein. The final orientation of the protein in the bilayer after insertion was addressed by proteinase K digestion, thereby making use of the unique C-terminal location of the antigenic binding site. After insertion the C-terminus is still available for the enzymatic digestion, while the N-terminus is not. This leads to the overall conclusion that the protein is able to insert spontaneously into membranes without the need of any machinery or transmembrane gradient, with the positively charged C-terminus remaining on the outside. The orientation after insertion of gene 9 protein is in agreement with the 'positive inside rule'.

Fructans insert between the headgroups of phospholipids

Fructans are polysaccharides consisting of one glucose unit and two or more fructose units. It was hypothesized that fructans play a role in drought tolerance in plants by interacting directly with the membrane. In this paper we investigated this hypothesis by studying fructan-membrane interactions in hydrated mono- and bilayer systems. It was found that fructans inserted between the headgroups of different kinds of phospholipids with some preference for phosphatidylethanolamine. Insertion occurred even under conditions of very tight lipid packing. The presence of a surface associated layer of fructan was observed in both model systems. This layer was able to reduce the ability of a surface-active protein to interact with the lipids. Fructans showed a much stronger effect on the different lipid systems than other (poly)saccharides, which appears to be related to their hydrophobic properties. Fructans were able to stabilize the liquid-crystalline lamellar phase, which is consistent with a drought protecting role in plants.

The specificity of monoglyceride-protein interactions and mechanism of the protein induced L(beta) to coagel phase transition

This study aims at gaining insight into the specificity and molecular mechanism of monoglyceride-protein interactions. We used beta-lactoglobulin (beta-LG) and lysozyme as model proteins and both monostearoylglycerol and monopalmitoylglycerol as defined gel phase monoglycerides. The monoglycerides were used in different combinations with the two negatively charged amphiphiles dicetylphosphate and distearylphosphate. The interactions were characterized using the monolayer technique, isothermal titration calorimetry, (2)H-nuclear magnetic resonance (NMR) using deuterium labelled monoglycerides and freeze fracture electron microscopy (EM). Our results show that lysozyme inserts efficiently into all monolayers tested, including pure monoglyceride layers. The insertion of beta-LG depends on the lipid composition of the monolayer and is promoted when the acylchains of the negatively charged amphiphile are shorter than that of the monoglyceride. The binding parameters found for the interaction of beta-LG and lysozyme with monoglyceride bilayers were generally similar. Moreover, in all cases a large exothermic binding enthalpy was observed which was found to depend on the nature of the monoglycerides but not of the proteins. (2)H-NMR and freeze fracture EM showed that this large enthalpy results from a protein mediated catalysis of the monoglyceride L(beta) to coagel phase transition. The mechanism of this phase transition consists of two steps, an initial protein mediated vesicle aggregation step which is followed by stacking and probably fusion of the bilayers.

The S-layer protein of Lactobacillus acidophilus ATCC 4356: identification and characterisation of domains responsible for S-protein assembly and cell wall binding

Lactobacillus acidophilus, like many other bacteria, harbors a surface layer consisting of a protein (S(A)-protein) of 43 kDa. S(A)-protein could be readily extracted and crystallized in vitro into large crystalline patches on lipid monolayers with a net negative charge but not on lipids with a net neutral charge. Reconstruction of the S-layer from crystals grown on dioleoylphosphatidylserine indicated an oblique lattice with unit cell dimensions (a=118 A; b=53 A, and gamma=102 degrees ) resembling those determined for the S-layer of Lactobacillus helveticus ATCC 12046. Sequence comparison of S(A)-protein with S-proteins from L. helveticus, Lactobacillus crispatus and the S-proteins encoded by the silent S-protein genes from L. acidophilus and L. crispatus suggested the presence of two domains, one comprising the N-terminal two-thirds (SAN), and another made up of the C-terminal one-third (SAC) of S(A)-protein. The sequence of the N-terminal domains is variable, while that of the C-terminal domain is highly conserved in the S-proteins of these organisms and contains a tandem repeat. Proteolytic digestion of S(A)-protein showed that SAN was protease-resistant, suggesting a compact structure. SAC was rapidly degraded by proteases and therefore probably has a more accessible structure. DNA sequences encoding SAN or Green Fluorescent Protein fused to SAC (GFP-SAC) were efficiently expressed in Escherichia coli. Purified SAN could crystallize into mono and multi-layered crystals with the same lattice parameters as those found for authentic S(A)-protein. A calculated S(A)-protein minus SAN density-difference map revealed the probable location, in projection, of the SAC domain, which is missing from the truncated SAN peptide. The GFP-SAC fusion product was shown to bind to the surface of L. acidophilus, L. helveticus and L. crispatus cells from which the S-layer had been removed, but not to non-stripped cells or to Lactobacillus casei.

Anionic phospholipids are involved in membrane association of FtsY and stimulate its GTPase activity

FtsY, the Escherichia coli homologue of the eukaryotic signal recognition particle (SRP) receptor alpha-subunit, is located in both the cytoplasm and inner membrane. It has been proposed that FtsY has a direct targeting function, but the mechanism of its association with the membrane is unclear. FtsY is composed of two hydrophilic domains: a highly charged N-terminal domain (the A-domain) and a C-terminal GTP-binding domain (the NG-domain). FtsY does not contain any hydrophobic sequence that might explain its affinity for the inner membrane, and a membrane-anchoring protein has not been detected. In this study, we provide evidence that FtsY interacts directly with E.coli phospholipids, with a preference for anionic phospholipids. The interaction involves at least two lipid-binding sites, one of which is present in the NG-domain. Lipid association induced a conformational change in FtsY and greatly enhanced its GTPase activity. We propose that lipid binding of FtsY is important for the regulation of SRP-mediated protein targeting.

The monolayer technique: a potent tool for studying the interfacial properties of antimicrobial and membrane-lytic peptides and their interactions with lipid membranes

Erudites of the antiquity already knew the calming effect of oil films on the sea waves. But one had to wait until 1774 to read the first scientific report on oil films from B. Franklin and again 1878 to learn the thermodynamic analysis on adsorption developed by J. Gibbs. Then, in 1891, Agnes Pockels described a technique to manipulate oil films by using barriers. Finally, in 1917, I. Langmuir introduced the experimental and theoretical modern concepts on insoluble monolayers. Since that time, and because it has been found to provide invaluable information at the molecular scale, the monolayer technique has been more and more extensively used, and, during the past decade, an explosive increase in the number of publications has occurred. Over the same period, considerable and ever-increasing interest in the antimicrobial peptides of various plants, bacteria, insects, amphibians and mammals has grown. Because many of these antimicrobial peptides act at the cell membrane level, the monolayer technique is entirely suitable for studying their physicochemical and biological properties. This review describes monolayer experiments performed with some of these antimicrobial peptides, especially gramicidin A, melittin, cardiotoxins and defensin A. After giving a few basic notions of surface chemistry, the surface-active properties of these peptides and their behavior when they are arranged in monomolecular films are reported and discussed in relation to their tridimensional structure and their amphipathic character. The penetration of these antimicrobial peptides into phospholipid monolayer model membranes, as well as their interactions with lipids in mixed films, are also emphasized.

Blistering of langmuir-blodgett bilayers containing anionic phospholipids as observed by atomic force microscopy

Asymmetric bilayers of different phospholipid compositions have been prepared by the Langmuir-Blodgett (L-B) method, and imaged by atomic force microscopy (AFM). Such bilayers can function as a model for biological membranes. The first leaflet consisted of zwitterionic phospholipids phosphatidylcholine (PC) or phosphatidylethanolamine (PE). The second leaflet consisted of the anionic phospholipid phosphatidylglycerol (PG), in either the condensed or liquid phase or, for comparison, of PC. Different bilayers showed different morphology. In all bilayers defects in the form of holes were present. In some bilayers with a first leaflet consisting of PC, polygonal line-shaped defects were observed, whereas when the first leaflet consisted of PE, mainly round defects were seen. Not only the shape, but also the amount of defects varied, depending on the condition and the composition of the second leaflet. In most of the PG-containing systems the defects were surrounded by elevations, which reversibly disappeared in the presence of divalent cations. This is the first time that such elevations have been observed on phospholipid bilayers. We propose that they are induced by phospholipid exchange between the two leaflets around the defects, leading to the presence of negatively charged phospholipids in the first leaflet. Because the substrate is also negatively charged, the bilayer around the edges is repelled and lifted up. Since it was found that the elevations are indeed detached from the substrate, we refer to this effect as bilayer blistering.

An investigation into the lipid interactions of peptides corresponding to the C-terminal anchoring domains of Escherichia coli penicillin-binding proteins 4, 5 and 6

The Escherichia coli low molecular mass penicillin-binding proteins PBP4, PBP5 and PBP6 are DD-peptidases involved in murein biosynthesis. It has been suggested that these proteins may be anchored to the periplasmic face of the inner membrane via their C termini. Here, peptide homologues (P4, P5 and P6) of the PBP4, PBP5 and PBP5 C-terminal regions have been used to investigate potential protein-lipid interactions involved in this anchoring mechanism. Surface pressure changes observed for the interactions of P5 and P6 with a range of monolayers indicated that the peptides are membrane interactive and that the interactions proceeded via predominantly hydrophobic forces with only minor requirements for anionic lipid. In contrast, P4 interactions with monolayers appeared to proceed via predominantly electrostatic forces with a major requirement for anionic lipid. The lipid interactions of all three peptides were generally enhanced by low pH and for P5 and P6 were in the range of 10-15 mN m-1 whereas for P4 interactions they were in the range of 3-7 mN m-1. CD analysis implied the presence of alpha-helical structure in P5 and P6 and molecular area determinations implied that P4 may also possess helical architecture in the presence of dioleoylphosphatidylglycerol monolayers. Overall, our results support the view that C-terminal amphiphilic alpha-helices are involved in the membrane anchoring of PBP5 and PBP6 and suggest that a similar mechanism could contribute to PBP4-membrane anchoring. Furthermore, we have speculated that the presence of cationic residues in the hydrophilic face of these alpha-helices may help facilitate membrane interaction.

Fructans interact strongly with model membranes

Bacterial fructans with a high degree of polymerisation cause a very large increase in surface pressure of lipid monolayers at the air-water interface with a broad range of lipids, including phosphatidylethanolamine and several types of phosphatidylcholines. The surface active effect of fructans contrasts strongly with the maximal effects observed for trehalose, sucrose and glucose under comparable conditions (20 and 0.6 mN/m for fructans and the other sugars, respectively). The results demonstrate a profound and specific membrane interaction of the fructans which is probably very different from the effect of the smaller carbohydrates. The fructan concentrations used in this study are within the physiological range observed in fructan-accumulating plants. The suggested water-stress protective effect of fructans may be induced by membrane-fructan interaction which prevent lipid condensation and phase transitions to take place.

Phosphatidylethanolamine mediates insertion of the catalytic domain of leader peptidase in membranes

Leader peptidase is an integral membrane protein of E. coli and it catalyses the removal of most signal peptides from translocated precursor proteins. In this study it is shown that when the transmembrane anchors are removed in vivo, the remaining catalytic domain can bind to inner and outer membranes of E. coli. Furthermore, the purified catalytic domain binds to inner membrane vesicles and vesicles composed of purified inner membrane lipids with comparable efficiency. It is shown that the interaction is caused by penetration of a part of the catalytic domain between the lipids. Penetration is mediated by phosphatidylethanolamine, the most abundant lipid in E. coli, and does not seem to depend on electrostatic interactions. A hydrophobic segment around the catalytically important residue serine 90 is required for the interaction with membranes.

Charge-dependent insertion of beta-lactoglobulin into monoglyceride monolayers

The interactions between beta-lactoglobulin and 1-monostearoyl-glycerol were studied in order to gain insight into protein-gel-phase monoglyceride interactions. Using a monomolecular layer at the air-water interface, we determined the insertion of beta-lactoglobulin into the monoglycerides under different conditions of protein and surface charge by varying the pH and/or incorporating charged amphiphiles into the monolayer, respectively, and using subphases with either a low or high ionic strength. The interactions were quantified by determining the binding of 14C-labeled beta-lactoglobulin to the monolayer. Our results show the importance of electrostatics for binding of beta-lactoglobulin to condensed monoglycerides. Moreover, electrostatic interactions were found to be important for specific insertion of beta-lactoglobulin into the monolayer. A negatively charged surface in particular allowed positively charged beta-lactoglobulin to insert in a surface charge density-dependent manner, even at surface pressures as high as 36 mN/m, whereas under other conditions, the limiting insertion pressure was 32 mN/m. The rheological properties of the monolayer were not affected by the interactions with beta-lactoglobulin.

Modifications of membrane phospholipid composition in nisin-resistant Listeria monocytogenes Scott A

A nisin-resistant (NISr) variant of Listeria monocytogenes Scott A was isolated by stepwise exposure to increasing concentrations of nisin in brain heart infusion (BHI) broth. The NISr strain was about 12 times more resistant to nisin than was the wild-type (WT) strain. Accordingly, higher nisin concentrations were required to dissipate both components of the proton motive force in the NISr strain than in the WT strain. Comparison of the membrane fatty acyl composition of the sensitive strain with that of its NISr derivative revealed no significant differences. From phospholipid head group composition analysis and phospholipid biosynthesis measurements during growth in the absence and presence of nisin, it could be inferred that the NISr strain produces relatively more phosphatidylglycerol (PG) and less diphosphatidylglycerol (DPG) than the parent strain does. Monolayer studies with pure lipid extracts from both strains showed that nisin interacted more efficiently with lipids derived from the WT strain than with those derived from the NISr strain, reflecting qualitative differences in nisin sensitivity. Involvement of the cell wall in acquisition of nisin resistance was excluded, since the WT and NISr strains showed a comparable sensitivity to lysozyme. Recently, it has been demonstrated that nisin penetrates more deeply into lipid monolayers of DPG than those of other lipids including PG, phosphatidylcholine, phosphatidylethanolamine, monogalactosyldiacylglycerol, and digalactosyldiacylglycerol (R.A. Demel, T. Peelen, R.J. Siezen, B. de Kruijff, and O.P. Kuipers, Eur. J.Biochem. 235:267-274, 1996). Collectively, the mechanism of nisin resistance in this L. monocytogenes NISr strain is attributed to a reduction in the DPG content of the cytoplasmic membrane.

Insertion of pea lectin into a phospholipid monolayer

Pea lectin (PSL) is a secretory sugar-binding protein, readily soluble in aqueous solutions of low osmolarity. However, PSL also appears to be associated with the plasma membrane at the tip of young pea root hairs. By using the Wilhelmy plate method, we found that PSL can insert into a lipid monolayer. This property appeared to be independent of the sugar-binding ability of the protein. This result suggests that PSL may be directly involved in membrane-mediated interactions with saccharide ligands, for example during root hair infection by symbiotic rhizobia.

Nisin Z, mutant nisin Z and lacticin 481 interactions with anionic lipids correlate with antimicrobial activity. A monolayer study

Monomolecular layers of lipids at the air/water interface have been used as a model membrane to study membrane interactions of the lantibiotic nisin. The natural lantibiotics nisin A and nisin Z proved to have a high affinity for the anionic lipids phosphatidylglycerol and bis(phosphatidyl)glycerol (cardiolipin). The interaction with zwitterionic phopholipids or neutral lipids is very low at surface pressures higher than 32 mN/m. Nisin, nisin mutants and lacticin 481 show a remarkable correlation between anti-microbial activity and anionic lipid interaction. The results indicate that primarily the N-terminal part (residues 1-22) penetrates into the lipid phase. Reduction of the flexibility at positions 20-21 has a negative effect on monolayer interaction and activity. The C-terminal part is probably responsible for ionic interactions of nisin in monomeric or oligomeric form with anionic lipids. In mixtures of anionic and zwitterionic lipids maximal interactions are found at approximately 70 mol/100 mol anionic lipid. Gram-positive bacteria, which form the main target for nisin, are characterized by a high content of anionic lipids in the membrane. Monolayers formed of lipid extracts of bacteria sensitive to nisin were more strongly penetrated than those of bacteria relatively insensitive to nisin.