Enzymatically produced acylglycerol and glycerin monostearate additives improved the characteristics of gelatin-stabilized omega-3 emulsions and microcapsules

The impacts of enzymatically produced acylglycerol and glycerin monostearate on the characteristics of gelatin-stabilized omega-3 emulsions and microcapsules were investigated. Tuna oil was enzymatically produced and the resulting acylglycerol was mixed with tuna oil at 12.5% (w/w) to prepare a novel oil phase. This oil phase was stabilized by gelatin to prepare oil-in-water emulsions and subsequent microcapsules via complex coacervation. The tuna oil with glycerin monostearate (GMS) at 1 and 2% (w/w) were used as controls. Results showed that both acylglycerol and GMS significantly reduced the emulsion droplet size and zeta potential, while increasing the viscoelasticity and stability. The diacylglycerol/monoacylglycerol were involved in the oil/water interfacial layer formation by lowering interfacial tension and increasing droplet surface hydrophobicity. Overall, the changed emulsion properties promoted the complex coacervation and contributed to the formation of microcapsules with improved oxidative stability. Therefore, enzymatically produced acylglycerol can develop high-quality stable omega-3 microencapsulated novel food ingredients.

Enhancing transmucosal delivery of CBD through nanoemulsion: in vitro and in vivo studies

Cannabidiol (CBD) has gained significant attention as a complementary and alternative medicine due to its promising therapeutic properties. However, CBD faces obstacles when administered orally due to its poor solubility in water, leading to limited absorption into the bloodstream and low and variable bioavailability. Therefore, the development of innovative delivery approaches that can enhance CBD's bioavailability, facilitate administration, and promote patient adherence is crucial. We propose a new approach for buccal delivery of CBD based on a self-assembling nanoemulsion (NE) made of a mixture of surfactants (Tween 80 and Labrasol) and medium chain triglycerides (MCTs). The NE formulation showed properties suitable for buccal administration, including appropriate size, CBD content, and surface properties, and, if compared to a CBD-MCT solution, it exhibited better control of administered doses, faster dissolution in buccal medium, and enhanced stability. The CBD-NE effectively released its active load within 5 h, remained stable even when diluted in simulated buccal fluids, and could be easily administered through a commercially available spray, providing consistent and reproducible doses of NE with optimized properties. In vitro permeation studies demonstrated that the CBD-NE facilitated swift and consistent permeation through the buccal mucosa, resulting in a higher concentration in the acceptor compartment compared to CBD-MCT. Furthermore, the in vivo study in mice showed that a single buccal administration of CBD-NE led to a quicker onset of action than a CBD solution in MCT, while maintaining the same plasma levels over time and leading to typically higher plasma concentrations compared to those usually achieved through oral administration. In conclusion, our CBD-NE represents a promising alternative formulation strategy for buccal CBD administration, overcoming the challenges associated with conventional formulations such as variable bioavailability and low control of administered doses.

Verapamil-Loaded Cubosomes for Enhancing Intranasal Drug Delivery: Development, Characterization, Ex Vivo Permeation, and Brain Biodistribution Studies

Verapamil hydrochloride (VRP), an antihypertensive calcium channel blocker drug has limited bioavailability and short half-life when taken orally. The present study was aimed at developing cubosomes containing VRP for enhancing its bioavailability and targeting to brain for cluster headache (CH) treatment as an off-label use. Factorial design was conducted to analyze the impact of different components on entrapment efficiency (EE%), particle size (PS), zeta potential (ZP), and percent drug release. Various in-vitro characterizations were performed followed by pharmacokinetic and brain targeting studies. The results revealed the significant impact of glyceryl monooleate (GMO) on increasing EE%, PS, and ZP of cubosomes with a negative influence on VRP release. The remarkable effect of Poloxamer 407 (P407) on decreasing EE%, PS, and ZP of cubosomes was observed besides its influence on accelerating VRP release%. The DSC thermograms indicated the successful entrapment of the amorphous state of VRP inside the cubosomes. The design suggested an optimized formulation containing GMO (50% w/w) and P407 (5.5% w/w). Such formulation showed a significant increase in drug permeation through nasal mucosa with high Er value (2.26) when compared to VRP solution. Also, the histopathological study revealed the safety of the utilized components used in the cubosomes preparation. There was a significant enhancement in the VRP bioavailability when loaded in cubosomes owing to its sustained release favored by its direct transport to brain. The I.N optimized formulation had greater BTE% and DTP% at 183.53% and 90.19%, respectively in comparison of 41.80% and 59% for the I.N VRP solution.

Extrusion as pretreatment for complexation of high-amylose starch with glycerin monostearin: Dependence on the guest molecule

Low-moisture extrusion (LME) can modify starch structures and enrich their functionality. These LME-made starches may efficiently form inclusion complexes (ICs) with hydrophobic guest molecules, which is profoundly impacted by the guest molecule concentration. In this work, the influence of glycerin monostearin (GMS) concentration on the structure and in vitro digestibility of pre-extruded starch-GMS complexes was investigated. The results showed that LME pretreatment increased the complex index of high-amylose starch with GMS by 13 %. The appropriate GMS concentrations produced ICs with high crystallinity and excellent thermostability. The presence of IC retarded amylose retrogradation and dominated bound water in starches. In addition, highly crystallized ICs were resistant to enzymolysis and had a higher proportion of resistant starch. The acquired knowledge would provide a better understanding of the LME-modified starch and GMS concentration-regulated IC formation.

Counterion optimization for hydrophobic ion pairing (HIP): Unraveling the key factors

In the present study, various surfactants were combined with insulin (INS), bovine serum albumin (BSA) and horseradish peroxidase (HRP) via hydrophobic ion pairing to increase lipophilicity and facilitate incorporation into self-emulsifying drug delivery systems (SEDDS). Lipophilicity of model proteins was successfully increased, achieving log Dn-butanol/water values up to 3.5 (INS), 3.2 (BSA) and 1.2 (HRP). Hereby, key factors responsible for complex formation were identified. In particular, surfactants with branched alkyl chains or chain lengths greater than C12 showed favorable properties for hydrophobic ion pairs (HIP). Furthermore, flexibility of the carbon chain resulted in higher lipophilicity and suitability of polar head groups of surfactants for HIP decreased in the rank order sulfonate > sulfosuccinate > phosphate = sulfate > carbonate > phosphonic acids = sulfobetaines. Stability studies of formed HIP complexes were performed in various gastrointestinal fluids and their solubility was determined in commonly used SEDDS excipients. Formed complexes were stable in simulated gastrointestinal fluids and could be incorporated into SEDDS formulations (C1: 10% caprylocaproyl polyoxyl-8 glycerides, 20% PEG-40 hydrogenated castor oil, 20% medium-chain triglycerides, 50% n-butanol; C2: 10% caprylocaproyl polyoxyl-8 glycerides, 20% PEG-40 hydrogenated castor oil, 20% medium-chain triglycerides, 40% n-butanol, 10% 1,2-butanediol), resulting in suitable payloads of up to 11.9 mg/ml for INS, 1.0 mg/ml for BSA and 1.6 mg/ml for HRP.

Progress in enrichment of n-3 polyunsaturated fatty acid: a review

n-3 Polyunsaturated fatty acids (n-3 PUFA) has been widely used in foods, and pharmaceutical products due to its beneficial effects. The content of n-3 PUFA in natural oils is usually low, which decreases its added value. Thus, there is an increasing demand on the market for n-3 PUFA concentrates. This review firstly introduces the differences in bioavailability and oxidative stability between different types of PUFA concentrate (free fatty acid, ethyl ester and acylglycerol), and then provides a comprehensive discussion of different methods for enrichment of lipids with n-3 PUFA including physical-chemical methods and enzymatic methods. Lipases used for catalyzing esterification, transesterification and hydrolysis reactions play an important role in the production of highly enriched various types of n-3 PUFA concentrates. Lipase-catalyzed alcoholysis or hydrolysis reactions are the mostly employed method to prepare high-quality n-3 PUFA of structural acylglycerols. Although many important advantages offered by lipases in enrichment of n-3 PUFA, the high cost of enzyme limits its industrial-scale production. Further research should focus on looking for biological enzymes with extraordinary catalytic ability and clear selectivity. Other novel technologies such as protein engineering and immobilization may be needed to modify lipases to improve its selectivity, catalytic ability and reuse.

Observations of phase changes in monoolein during high viscous injection

Serial crystallography of membrane proteins often employs high-viscosity injectors (HVIs) to deliver micrometre-sized crystals to the X-ray beam. Typically, the carrier medium is a lipidic cubic phase (LCP) media, which can also be used to nucleate and grow the crystals. However, despite the fact that the LCP is widely used with HVIs, the potential impact of the injection process on the LCP structure has not been reported and hence is not yet well understood. The self-assembled structure of the LCP can be affected by pressure, dehydration and temperature changes, all of which occur during continuous flow injection. These changes to the LCP structure may in turn impact the results of X-ray diffraction measurements from membrane protein crystals. To investigate the influence of HVIs on the structure of the LCP we conducted a study of the phase changes in monoolein/water and monoolein/buffer mixtures during continuous flow injection, at both atmospheric pressure and under vacuum. The reservoir pressure in the HVI was tracked to determine if there is any correlation with the phase behaviour of the LCP. The results indicated that, even though the reservoir pressure underwent (at times) significant variation, this did not appear to correlate with observed phase changes in the sample stream or correspond to shifts in the LCP lattice parameter. During vacuum injection, there was a three-way coexistence of the gyroid cubic phase, diamond cubic phase and lamellar phase. During injection at atmospheric pressure, the coexistence of a cubic phase and lamellar phase in the monoolein/water mixtures was also observed. The degree to which the lamellar phase is formed was found to be strongly dependent on the co-flowing gas conditions used to stabilize the LCP stream. A combination of laboratory-based optical polarization microscopy and simulation studies was used to investigate these observations.

Distigmasterol-Modified Acylglycerols as New Structured Lipids-Synthesis, Identification and Cytotoxicity

Plant sterols, also referred as phytosterols, have been known as bioactive compounds which have cholesterol-lowering properties in human blood. It has been established that a diet rich in plant sterols or their esters alleviates cardiovascular diseases (CVD), and also may inhibit breast, colon and lung carcinogenesis. Phytosterols, in their free and esterified forms, are prone to thermo-oxidative degradation, where time and temperature affect the level of degradation. Looking for new derivatives of phytosterols with high thermo-oxidative stability for application in foods, our idea was to obtain novel structured acylglycerols in which two fatty acid parts are replaced by stigmasterol residues. In this work, asymmetric (1,2- and 2,3-) distigmasterol-modified acylglycerols (dStigMAs) were synthesized by the covalent attachment of stigmasterol residues to sn-1 and sn-2 or sn-2 and sn-3 positions of 3-palmitoyl-sn-glycerol or 1-oleoyl-sn-glycerol, respectively, using a succinate or carbonate linker. The chemical structures of the synthesized compounds were identified by NMR, HR-MS, and IR data. Moreover, the cytotoxicity of the obtained compounds was determined. The dStigMAs possessing a carbonate linker showed potent cytotoxicity to cells isolated from the small intestine and colon epithelium and liver, whereas the opposite results were obtained for compounds containing a succinate linker.

New Pyridone-Based Derivatives as Cannabinoid Receptor Type 2 Agonists

The activation of the human cannabinoid receptor type II (CB2R) is known to mediate analgesic and anti-inflammatory processes without the central adverse effects related to cannabinoid receptor type I (CB1R). In this work we describe the synthesis and evaluation of a novel series of N-aryl-2-pyridone-3-carboxamide derivatives tested as human cannabinoid receptor type II (CB2R) agonists. Different cycloalkanes linked to the N-aryl pyridone by an amide group displayed CB2R agonist activity as determined by intracellular [cAMP] levels. The most promising compound 8d exhibited a non-toxic profile and similar potency (EC50 = 112 nM) to endogenous agonists Anandamide (AEA) and 2-Arachidonoylglycerol (2-AG) providing new information for the development of small molecules activating CB2R. Molecular docking studies showed a binding pose consistent with two structurally different agonists WIN-55212-2 and AM12033 and suggested structural requirements on the pyridone substituents that can satisfy the orthosteric pocket and induce an agonist response. Our results provide additional evidence to support the 2-pyridone ring as a suitable scaffold for the design of CB2R agonists and represent a starting point for further optimization and development of novel compounds for the treatment of pain and inflammation.

Safety Assessment of PEGylated Alkyl Glycerides as Used in Cosmetics

The Expert Panel for Cosmetic Ingredient Safety (Panel) assessed the safety of 60 PEGylated alkyl glycerides. PEGylated alkyl glycerides are mono-, di-, and/or triglycerides that have been modified with ethylene glycol repeat units (in the starting material form as epoxide). Most of the PEGylated alkyl glycerides are reported to function as skin-conditioning agents or surfactants. The Panel reviewed the available animal and clinical data as well as data from the 1999 report for the 5 polyethylene glycol (PEG) glyceryl cocoates and the 2012 report of PEGylated oils, to determine the safety of these ingredients. The Panel concluded these ingredients are safe in the current practices of use and concentration when formulated to be nonirritating; this conclusion supersedes the 1999 conclusion issued on 5 PEG glyceryl cocoate ingredients.

Neem secretory cells: developmental cytology and indications of cell autotoxicity

The neem tree (Azadirachta indica A.Juss.) contains a range of biologically active compounds-mainly triterpenoids produced in single secretory cells, which are distributed among all plant parts. Neem secretions are toxic to animal cells, triggering autolytic mechanisms that culminate in cell disruption. However, little is known about the self-toxicity of these secretions to the cells that produce them. We carried out an anatomical, histochemical, and ultrastructural investigation of neem's single secretory cells in the shoot apex and in young leaves. We evaluated the morphological changes as possible evidences of stress reactions to their own secretions. The subcellular apparatus involved in synthesis and compartmentation was consistent with hydrophilic and lipophilic secretions. Polymorphic plastids devoid of thylakoids and abundant smooth endoplasmic reticulum in the later stages of differentiation are comparable with previous reports on neem cotyledons with regard to terpenoid synthesis. However, secretions were compartmentalized within autophagic vacuoles and periplasmic spaces instead of in terpenoid vesicles. Cellular swelling, increased vesiculation, dilatation of endoplasmic reticulum cisternae, mitochondrial hypertrophy in the cristolysis process, autolytic vacuoles, and vacuolar degeneration culminating in protoplast autolysis are all consistent with early indications of autotoxicity. The signaling stress reaction mechanism was expressed as cytoplasmic deposits of calcium salt and by the expression of a 70-kDa heat-shock protein. The morphological and histochemical changes in the secreting cells are comparable with those described in animal cells exposed to neem oil. Our data provide evidence of cell damage and signaling reactions linked to these cells' own secretions before autolysis.

Gelatin-loaded cubosomes stabilized with hydrophobically modified quaternized cellulose nanofiber and their pH-dependent release property

Monoolein cubic phase immobilizing hydrophobically modified gelatin (HmGel) in its water channel was prepared by a melt-hydration method. The cubic phase was micronized into cubosomes by using hydrophobically modified quaternized cellulose nanofiber (HmQCNF) as a stabilizer. The phase transition temperature of the cubic phase was about 68-70 °C. Small angle X-ray diffraction revealed that HmGel-loaded cubosome stabilized with HmCNF was a diamond type of cubic phase. HmGel-loaded cubosomes stailized with HmQCNF were dependent on the pH value in terms of the release of their payload (i.e, methylene blue) much more strongly than HmGel-loaded cubosomes stabilized with Pluronic F127.

Effects of freeze-thaw treatment and pullulanase debranching on the structural properties and digestibility of lotus seed starch-glycerin monostearin complexes

The effects of multiple cycles of freeze-thaw treatment, combined with pullulanase debranching, on the structural properties and digestibility of lotus seed starch-glycerin monostearin complexes were investigated. The formation and melting of ice crystals during freeze-thaw treatment disrupted the crystalline structure of the starch granules, creating pores which facilitated access of pullulanase to the interior of the granules. Pullulanase debranching increased the free amylose content of the starch, which promoted the formation of starch-lipid complexes, which, in turn, increased the proportion of resistant starch and the overall resistance of the starch to digestive enzyme action. These effects increased with the number of freeze-thaw cycles, because more cycles increased both the disruption of the granule structure and the extent of pullulanase debranching. These findings provide a basis for the preparation of functional foods with low glycemic indices, which have strong potential for management of type II diabetes.

Cuboplex-Mediated Nonviral Delivery of Functional siRNA to Chinese Hamster Ovary (CHO) Cells

Lipid nanoparticles of internal cubic symmetry, termed cuboplexes, are potential nonviral delivery vehicles for gene therapy due to their "topologically active" nature, which may enhance endosomal escape and improve delivery outcomes. In this study, we have used cationic cuboplexes, based on monoolein (MO) doped with a cationic lipid, for the encapsulation and delivery of antisense green fluorescent protein (GFP)-small interfering RNA (siRNA) into Chinese Hamster Ovary (CHO)-GFP cells. Agarose gel electrophoresis has confirmed the successful encapsulation of siRNA within cationic cubosomes, while synchrotron small-angle X-ray scattering (SAXS) demonstrated that the underlying cubic nanostructure of the particles was retained following encapsulation. The cationic cubosomes were shown to be reasonably nontoxic against the CHO-GFP cell line. Fluorescence-activated cell sorting (FACS) provided evidence of the successful transfection to CHO-GFP cells. Knockdown efficiency was strongly linked to the type of cationic lipid used, although all cubosomes had essentially the same internal nanostructure. The gene knockdown efficiency for some cationic cubosomes was shown to be higher than lipofectamine, which is a commercially available liposome-based formulation, while the controlled release of the siRNA from the cubosomes over a 72 h period was observed using confocal microscopy. This combination exemplifies the potential of cationic cuboplexes as a novel, nonviral, controlled-release delivery vector for siRNA.

Direct Infusion Mass Spectrometry for Complex Lipid Analysis

Direct infusion or "shotgun" mass spectrometry provides a fast strategy to measure different classes of lipids, combining rapid analysis and short idle time. In contrast to liquid chromatography-mass spectrometry (LC-MS), the lipids are infused into the mass spectrometer without prior separation by liquid chromatography. Ions are separated in the quadrupole of a tandem mass spectrometer, and after collision-induced dissociation fragments are quantified relative to internal standards in the third quadrupole or in the time-of-flight mass analyzer of a triple quadrupole or quadrupole time of flight (Q-TOF) mass spectrometer. Abundant lipids, that is, galactolipids and phospholipids in leaves, are measured in crude lipid extracts, while less abundant lipids can be measured after enrichment by solid-phase extraction. Here we describe protocols for the quantification of the major plant glycerolipids (galactolipids, phospholipids, diacylglycerol, and triacylglycerol) using nanospray direct infusion mass spectrometry. This provides a strategy for comprehensive, highly sensitive, high-throughput lipidomic analyses.

Smart phase transformation system based on lyotropic liquid crystalline@hard capsules for sustained release of hydrophilic and hydrophobic drugs

Smart phase transformation systems@hard capsule (SPTS@hard capsule) based on lyotropic liquid crystalline (LLC) were developed for oral sustained release in this study. Doxycycline hydrochloride (DOXY) and meloxicam (MLX) were used as hydrophilic and hydrophobic model drug, respectively. Two systems were added with different additives, that is, gelucire 39/01, PEG 1000 and Tween 80 to adjust their melting point and release profiles. The phase transformation of these systems could be triggered by water as well as temperature. They could spontaneously transform into cubic phase or hexagonal phase when coming across with water, to achieve the 24 h sustained release profile. In addition, the obtained systems could switch between semisolid state and liquid state when temperature changed within room temperature and body temperature, which facilitated the phase transformation in gastrointestinal tract and during their encapsulation into hard capsules. LLC-based SPTS@hard capsule revealed potential for the industrialization of its oral administration on account of its drugs accommodation with different solubility, controllable release profile and simple preparation process.

DPPC-coated lipid nanoparticles as an inhalable carrier for accumulation of resveratrol in the pulmonary vasculature, a new strategy for pulmonary arterial hypertension treatment

In this study, we investigated the feasibility of dipalmitoylphosphatidylcholine-coated lipid nanoparticles (DPPC-LNs) as a carrier for preferential accumulation into lungs of Resveratrol (Res), a potentially promising drug for the treatment of pulmonary arterial hypertension (PAH). Res-loaded DPPC-LNs were prepared following a thin film hydration-ultrasonic dispersion technique using glyceryl monostearate as lipid core. DPPC can reduce the interactions between nanoparticles and pulmonary surfactant. The optimal formulation was prepared and characterized for physicochemical properties, storage stability and in vitro release profiles. The optimal formulation was evaluated for uptake by pulmonary arterial smooth muscle cells (PASMCs) using fluorescence microscopy. The efficacy of Res-loaded DPPC-LNs in reducing hyperplasia was tested in 5-HT induced proliferated PASMCs. The drug absorption profiles upon intratracheal administration were monitored in healthy rats. Optimized spherical DPPC-LNs - with mean size of 123.7 nm, zeta potential of -19.4 mV and entrapment efficiency of 94.40% - exhibited an 80% cumulative drug release over 48 h. Fluorescence microscopic study revealed an time-dependent enhancement of cellular uptake of Rh123-labeled DPPC-LNs by PASMCs. PASMC proliferation induced by 5-HT was significantly inhibited by Res-loaded DPPC-LNs. Optimized DPPC-LNs appeared to be safe when incubated with PASMCs. Besides, plasma and lung tissue data analysis indicated higher value of accumulation after intratracheal administration of Res-loaded DPPC-LNs in comparison with the intravenously dosed Res solution, indicating longer retention of Res in the lungs and their slower entry to the systemic blood circulation. DPPC-LNs could be a viable delivery system for site-specific treatment of PAH.

Optimization and Characterization of Mesoporous Sulfonated Carbon Catalyst and Its Application in Modeling and Optimization of Acetin Production

In this study, an optimized mesoporous sulfonated carbon (OMSC) catalyst derived from palm kernel shell biomass was developed using template carbonization and subsequent sulfonation under different temperatures and time conditions. The OMSC catalyst was characterized using acid-base titration, elemental analysis, XRD, Raman, FTIR, XPS, TPD-NH₃, TGA-DTA, SEM, and N₂ adsorption–desorption analysis to reveal its properties. Results proved that the OMSC catalyst is mesoporous and amorphous in structure with improved textural, acidic, and thermal properties. Both FTIR and XPS confirmed the presence of -SO₃H, -OH, and -COOH functional groups on the surface of the catalyst. The OMSC catalyst was found to be efficient in catalyzing glycerol conversion to acetin via an acetylation reaction with acetic acid within a short period of 3 h. Response surface methodology (RSM), based on a two-level, three-factor, face-centered central composite design, was used to optimize the reaction conditions. The results showed that the optimized temperature, glycerol-to-acetic acid mole ratio, and catalyst load were 126 °C, 1:10.4, and 0.45 g, respectively. Under these optimum conditions, 97% glycerol conversion (GC) and selectivities of 4.9, 27.8, and 66.5% monoacetin (MA), diacetin (DA), and triacetin (TA), respectively, were achieved and found to be close to the predicted values. Statistical analysis showed that the regression model, as well as the model terms, were significant with the predicted R² in reasonable agreement with the adjusted R² (<0.2). The OMSC catalyst maintained excellent performance in GC for the five reaction cycles. The selectivity to TA, the most valuable product, was not stable until the fourth cycle, attributable to the leaching of the acid sites.

Modeling of the Production of Lipid Microparticles Using PGSS® Technique

Solid lipid microparticles (SLMPs) are attractive carriers as delivery systems as they are stable, easy to manufacture and can provide controlled release of bioactive agents and increase their efficacy and/or safety. Particles from Gas-Saturated Solutions (PGSS^®) technique is a solvent-free technology to produce SLMPs, which involves the use of supercritical CO₂ (scCO₂) at mild pressures and temperatures for the melting of lipids and atomization into particles. The determination of the key processing variables is crucial in PGSS^® technique to obtain reliable and reproducible microparticles, therefore the modelling of SLMPs production process and variables control are of great interest to obtain quality therapeutic systems. In this work, the melting point depression of a commercial lipid (glyceryl monostearate, GMS) under compressed CO₂ was studied using view cell experiments. Based on an unconstrained D-optimal design for three variables (nozzle diameter, temperature and pressure), SLMPs were produced using the PGSS^® technique. The yield of production was registered and the particles characterized in terms of particle size distribution. Variable modeling was carried out using artificial neural networks and fuzzy logic integrated into neurofuzzy software. Modeling results highlight the main effect of temperature to tune the mean diameter SLMPs, whereas the pressure-nozzle diameter interaction is the main responsible in the SLMPs size distribution and in the PGSS^® production yield.

Hydrophobic ion pairing of a GLP-1 analogue for incorporating into lipid nanocarriers designed for oral delivery

The lipophilic character of peptides can be tremendously improved by hydrophobic ion pairing (HIP) with counterions to be efficiently incorporated into lipid-based nanocarriers (NCs). Herein, HIPs of exenatide with the cationic surfactant tetraheptylammonium bromide (THA) and the anionic surfactant sodium docusate (DOC) were formed to increase its lipophilicity. These HIPs were incorporated into lipid based NCs comprising 41% Capmul MCM, 15% Captex 355, 40% Cremophor RH and 4% propylene glycol. Exenatide-THA NCs showed a log Dlipophilic phase (LPh)/release medium (RM) of 2.29 and 1.92, whereas the log DLPh/RM of exenatide-DOC was 1.2 and -0.9 in simulated intestinal fluid and Hanks' balanced salts buffer (HBSS), respectively. No significant hemolytic activity was induced at a concentration of 0.25% (m/v) of both blank and loaded NCs. Exenatide-THA NCs and exenatide-DOC NCs showed a 10-fold and 3-fold enhancement in intestinal apparent membrane permeability compared to free exenatide, respectively. Furthermore, orally administered exenatide-THA and exenatide-DOC NCs in healthy rats resulted in a relative bioavailability of 27.96 ± 5.24% and 16.29 ± 6.63%, respectively, confirming the comparatively higher potential of the cationic surfactant over the anionic surfactant. Findings of this work highlight the potential of the type of counterion used for HIP as key to successful design of lipid-based NCs for oral exenatide delivery.

Syntheses of L-Rhamnose-Linked Amino Glycerolipids and Their Cytotoxic Activities against Human Cancer Cells

A major impediment to successful cancer treatment is the inability of clinically available drugs to kill drug-resistant cancer cells. We recently identified metabolically stable l-glucosamine-based glycosylated antitumor ether lipids (GAELs) that were cytotoxic to chemotherapy-resistant cancer cells. In the absence of commercially available l-glucosamine, many steps were needed to synthesize the compound and the overall yield was poor. To overcome this limitation, a facile synthetic procedure using commercially available l-sugars including l-rhamnose and l-glucose were developed and the l-GAELs tested for anticancer activity. The most potent analog synthesized, 3-amino-1-O-hexadecyloxy-2R-(O–α-l-rhamnopyranosyl)-sn- glycerol 3, demonstrated a potent antitumor effect against human cancer cell lines derived from breast, prostate, and pancreas. The activity observed was superior to that observed with clinical anticancer agents including cisplatin and chlorambucil. Moreover, like other GAELs, 3 induced cell death by a non-membranolytic caspase-independent pathway.

Immobilisation of β-galactosidase within a lipid sponge phase: structure, stability and kinetics characterisation

In the formulation of an active enzyme enclosed in a matrix for controlled delivery, it is a challenge to achieve a high protein load and to ensure high activity of the protein. For the first time to our knowledge, we report the use of a highly swollen lipid sponge (L₃) phase for encapsulation of the large active enzyme, β-galactosidase (β-gal, 238 kDa). This enzyme has large relevance for applications in, e.g. the production of lactose free milk products. The formulation consisted of diglycerol monooleate (DGMO), and a mixture of mono-, di- and triglycerides (Capmul GMO-50) stabilised by polysorbate 80 (P80). The advantage of this type of matrix is that it can be produced on a large scale with a fairly simple and mild process as the system is in practice self-dispersing, yet it has a well-defined internal nano-structure. Minor effects on the sponge phase structure due to the inclusion of the enzyme were observed using small angle X-ray scattering (SAXS). The effect of encapsulation on the enzymatic activity and kinetic characteristics of β-galactosidase activity was also investigated and can be related to the enzyme stability and confinement within the lipid matrix. The encapsulated β-galactosidase maintained its activity for a significantly longer time when compared to the free solution at the same temperature. Differences in the particle size and charge of sponge-like nanoparticles (L₃-NPs) with and without the enzyme were analysed by dynamic light scattering (DLS) and zeta-potential measurements. Moreover, all the initial β-galactosidase was encapsulated within L₃-NPs as revealed by size exclusion chromatography.

Interfacial ordering of tristearin induced by glycerol monooleate and PGPR: A coarse-grained molecular dynamics study

We use coarse-grained molecular dynamics simulations to study the effect of surfactant structure on the ordering of bulk tristearin at an oil-water interface. In the absence of surfactant, tristearin acyl chains are marginally aligned normal to the interface. The surfactant glycerol monooleate (GMO), a common small-molecule monoacylglycerol (MW: 357 g/mol), preferentially adsorbs to the oil-water interface, displacing more of the tristearin as its concentration increases. The tristearin that remains at the interface is closely aligned normal to the interface. Adjacent to the interface, bulk tristearin increasingly aligns with its acyl chains entwined with the GMO acyl chain, which also preferentially aligns normal to the interface. In contrast, polyglycerol polyricinoleate (PGPR), a bulkier, polymeric surfactant (MW: 1398 g/mol for a molecule with five monomers), both displaces tristearin from the interface and reduces the alignment of the molecules that remain. We suggest that the similar fatty acid moieties of GMO (oleic acid) and tristearin (stearic acid) lead to liquid-state association and alignment, the latter of which can then serve as a template onto which tristearin crystals can nucleate. Conversely, by both displacing tristearin from the interface and reducing alignment below that of the surfactant-free system, PGPR eliminates the possibility of tristearin interfacial crystallisation.

Protein-Eye View of the in Meso Crystallization Mechanism

For evolving biological and biomedical applications of hybrid protein?lipid materials, understanding the behavior of the protein within the lipid mesophase is crucial. After more than two decades since the invention of the in meso crystallization method, a protein-eye view of its mechanism is still lacking. Numerous structural studies have suggested that integral membrane proteins preferentially partition at localized flat points on the bilayer surface of the cubic phase with crystal growth occurring from a local fluid lamellar L_? phase conduit. However, studies to date have, by necessity, focused on structural transitions occurring in the lipid mesophase. Here, we demonstrate using small-angle neutron scattering that the lipid bilayer of monoolein (the most commonly used lipid for in meso crystallization) can be contrast-matched using deuteration, allowing us to isolate scattering from encapsulated peptides during the crystal growth process for the first time. During in meso crystallization, a clear decrease in form factor scattering intensity of the peptides was observed and directly correlated with crystal growth. A transient fluid lamellar L_? phase was observed, providing direct evidence for the proposed mechanism for this technique. This suggests that the peptide passes through a transition from the cubic Q_II phase, via an L_? phase to the lamellar crystalline L_c phase with similar layered spacing. When high protein loading was possible, the lamellar crystalline L_c phase of the peptide in the single crystals was observed. These findings show the mechanism of in meso crystallization for the first time from the perspective of integral membrane proteins.

Unraveling the Role of Monoolein in Fluidity and Dynamical Response of a Mixed Cationic Lipid Bilayer

The maintenance of cell membrane fluidity is of critical importance for various cellular functions. At lower temperatures when membrane fluidity decreases, plants and cyanobacteria react by introducing unsaturation in the lipids, so that the membranes return to a more fluidic state. To probe how introduction of unsaturation leads to reduced membrane fluidity, a model cationic lipid dioctadecyldimethylammonium bromide (DODAB) has been chosen, and the effects of an unsaturated lipid monoolein (MO) on the structural dynamics and phase behavior of DODAB have been monitored by quasielastic neutron scattering and time-resolved fluorescence measurements. In the coagel phase, fluidity of the lipid bilayer increases significantly in the presence of MO relative to pure DODAB vesicles and becomes manifest in significantly enhanced dynamics of the constituent lipids along with faster hydration and orientational relaxation dynamics of a fluorophore. On the contrary, MO restricts both lateral and internal motions of the lipid molecules in the fluid phase (>330 K), which is consistent with relatively slow hydration and orientational relaxation dynamics of the fluorophore embedded in the mixed lipid bilayer. The present study illustrates how incorporation of an unsaturated lipid at lower temperatures (below the phase transition) assists the model lipid (DODAB) in regulating fluidity via enhancement of dynamics of the constituent lipids.

Highly Efficient and Enzyme-Recoverable Method for Enzymatic Concentrating Omega-3 Fatty Acids Generated by Hydrolysis of Fish Oil in a Substrate-Constituted Three-Liquid-Phase System

A novel three-liquid-phase system which contained fish oil as the nonpolar phase was developed for the lipase-based hydrolysis of fish oil and subsequent enrichment of the omega-3 polyunsaturated fatty acids (n-3 PUFA) in the glyceride fraction of the fish oil. In comparison with the traditional oil/water system, the enrichment factor of n-3 PUFA in this system was increased by 363.4% as a result of a higher dispersity, higher selectivity of the lipase for the other fatty acids except for n-3PUFA, and relief of product inhibition. The content of n-3 PUFA in the glyceride fraction could be concentrated to 67.97% by repeated hydrolysis after removing the free fatty acids. Furthermore, the lipase could be reused for at least eight rounds. This method would be an ideal approach for enriching n-3 PUFA because it is cost-effective, low in toxicity, and easily scaled up.

Aspartic-Acid-Based Ampholytic Amphiphiles: Synthesis, Characterization, and pH-Dependent Properties at Air/Water and Oil/Water Interfaces

A facile and two-step strategy was employed to synthesize a series of novel aspartic-acid-based ampholytic amphiphiles from sustainable and commercially viable substances as starting materials. The molecular structures of the synthetic compounds were well-identified by mass spectrometry and ¹H/¹³C nuclear magnetic resonance analysis, and the physicochemical, pH-dependent foaming, and emulsifying properties were evaluated by the use of multiple techniques, such as Fourier transform infrared spectroscopy, differential scanning calorimetry, Langmuir-Blodgett study, and fluorescence microscopy imaging. As a result of the co-existence of amino and carboxyl groups in the synthetic compounds, the compounds presented varying charges (cationic, ampholytic, and anionic) depending upon the pH of the medium compared to the dissociation constants (p K_a). Compounds with cationic (pH 1.0) and anionic (pH 9.0) forms had significantly higher γ_0.1 and critical micelle concentration values than those with ampholytic forms (pH 7.0). sn-1-Lauroyl- sn-3-aspartic acid (compound 3) at neutral and alkaline conditions displayed comparable foaming properties, including foaming, calcium-tolerant, and temperature-resistant abilities, with commercial sulfonate sodium dodecyl sulfate (SDS), and thus might be a promising alternative to SDS, applied in personal care products and detergent formula. sn-1-Palmtoyl- sn-3-aspartic acid (compound 5a) with an ampholytic structure was proven as the most excellent stabilizer for the preparation of oil-in-water emulsions compared to palmityl aspartic acid (compound 5b), commercial food ingredient diacetyltartaric acid esters of mono- and diglycerides, and glyceride monopalmitate at aqueous phase pH 7.0. Thus, it has promising use as a pH-dependent emulsifying agent in various fields.

Cross-Linking Chitosan into Hydroxypropylmethylcellulose for the Preparation of Neem Oil Coating for Postharvest Storage of Pitaya (Stenocereus pruinosus)

The market trend for pitaya is increasing, although the preservation of the quality of this fruit after the harvest is challenging due to microbial decay, dehydration, and oxidation. In this work, the application of antimicrobial chitosan-based coatings achieved successful postharvest preservation of pitaya (Stenocereus pruinosus) during storage at 10 ± 2 °C with a relative humidity of 80 ± 5%. The solution of cross-linked chitosan with hydroxypropylmethylcellulose with entrapped Neem oil (16 g·L^-1) displayed the best postharvest fruit characteristics. The reduction of physiological weight loss and fungal contamination, with an increased redness index and release of azadirachtin from the microencapsulated oil, resulted in up to a 15 day shelf life for this fruit. This postharvest procedure has the potential to increase commercial exploitation of fresh pitaya, owing to its good taste and high content of antioxidants.

Preparation of Nanostructured Lipid Drug Delivery Particles Using Microfluidic Mixing

BACKGROUND

Cubosomes are highly ordered self-assembled lipid particles analogous to liposomes, but with internal liquid crystalline structure. They are receiving interest as stimuli responsive delivery particles, but their preparation typically requires high energy approaches such as sonication which is not favourable in many applications.

OBJECTIVE

Here we investigated the impact of microfluidic preparation on particle size distribution and internal structure of cubosomes prepared from two different lipid systems, phytantriol and glyceryl monooleate (GMO).

METHODS

The impact of relative flow rates of the aqueous and organic streams, the total flow rate and temperature were investigated in a commercial microfluidic system. The particle size distribution and structure were measured using dynamic light scattering and small angle X-ray scattering respectively.

RESULTS

Phytantriol based particles were robust to different processing conditions, while cubosomes formed using GMO were more sensitive to composition both locally and globally, which reflects their preparation using other techniques.

CONCLUSION

Thus, in summary microfluidics represents a reproducible and versatile method to prepare complex lipid particle dispersions such as cubosomes.

Solid Lipid Nanoparticles of Dronedarone Hydrochloride for Oral Delivery: Optimization, In Vivo Pharmacokinetics and Uptake Studies

BACKGROUND

Dronedarone HCl (DRD), owing to its poor aqueous solubility and extensive presystemic metabolism shows low oral bioavailability of about 4% without food, which increases to approximately 15% when administered with a high fat meal.

OBJECTIVE

Solid lipid nanoparticles (SLN) were designed with glyceryl monstearate (GMS) in order to improve oral bioavailability of DRD.

METHODS

Hot homogenization followed by probe sonication was used to prepare SLN dispersions. Box-Behnken design was used to optimize manufacturing conditions. SLN were characterized for particle size, zeta potential, entrapment efficiency, physical state and in vitro drug release. Pharmacokinetics and intestinal uptake study of dronedarone HCl loaded solid lipid nanoparticles (DRD-SLN) in the presence and absence of endocytic uptake inhibitor, chlorpromazine (CPZ) was performed with conscious male Wistar rats.

RESULTS

Optimized formulation of SLN showed particle size of 233 ± 42 nm and entrapment efficiency of 87.4 ± 1.29%. Results of pharmacokinetic studies revealed enhancement of bioavailability of DRD by 2.68 folds from SLN as compared to DRD suspension. Significantly reduced bioavailability of DRD-SLNs in the presence of chlorpromazine, demonstrated the role of endocytosis in uptake of SLN formulation.

CONCLUSION

These results indicated that dronedarone HCl loaded SLN could potentially be exploited as a delivery system for improving oral bioavailability by minimizing first pass metabolism.

Bile Salts Caught in the Act: From Emulsification to Nanostructural Reorganization of Lipid Self-Assemblies

Bile salts (BSs) are important for the digestion and absorption of fats and fat-soluble vitamins in the small intestine. In this work, we scrutinized, with small-angle X-ray scattering (SAXS), the crucial functions of bile salts beyond their capacity for the interfacial stabilization of submicrometer-sized lipid particles. By studying a wide compositional range of BS-lipid dispersions using two widely applied lipids for drug-delivery systems (one a monoglyceride being stabilizer-sensitive and the other an aliphatic alcohol being relatively stabilizer-insensitive), we identified the necessary BS to lipid ratios to guarantee full emulsification. A novel ad hoc developed global small-angle-X-ray scattering analysis method revealed that the addition of BS hardly changes the bilayer thicknesses in bicontinuous phases, while significant membrane thinning is observed in the coexisting fluid lamellar phase. Furthermore, we show that a BS strongly decreases the average critical packing parameter. At increasing BS concentration, the order of phases formed is (i) the bicontinuous diamond cubic ( Pn3 m), (ii) the bicontinuous primitive cubic ( Im3 m), and (iii) the fluid lamellar phase ( L_α). These distinctive findings on BS-driven "emulsification" and "membrane curvature reduction" provide new molecular-scale insights for the understanding of the interfacial action of bile salts on lipid assemblies.

Lipase-catalyzed selective enrichment of omega-3 polyunsaturated fatty acids in acylglycerols of cod liver and linseed oils: Modeling the binding affinity of lipases and fatty acids

Present study employed molecular modeling method to elucidate the binding affinity of lipases with fatty acids of different chain lengths; and investigated the effects of lipases positional and fatty acids specificity on omega-3 polyunsaturated fatty acids (ω-3 PUFAs) enrichment in cod liver and linseed oils. Among the lipases studied, molecular modeling showed the active sites of Candida rugosa lipase (CRL) had a low C-Docker interactive energy for saturated (SFA) and monounsaturated (MUFA) fatty acids which predicted CRL to have highest preferences to selectively hydrolyze resulting in efficient enrichment of ω-3 PUFAs. Verification experiments showed the SFA and MUFA in the acylglycerol fraction includes monoacylglcyerols (MAG), diacyglycerols (DAG), and triacylglycerols (TAG) of CRL-hydrolyzed cod liver oil decreased from the initial 25.21 to 16.88% and 45.25 to 32.17%, respectively. In addition, CRL-hydrolyzed cod liver oil demonstrated 88.36% of ω-3 PUFAs enrichment. The regio-distribution of fatty acids in CRL-hydrolyzed cod liver oil were not significantly different than that of cod liver oil indicating the ω-3 PUFAs enrichment was due to fatty acids selectivity and not positional selectivity of CRL.

Polymer-free cubosomes for simultaneous bioimaging and photodynamic action of photosensitizers in melanoma skin cancer cells

We designed novel polymer-free cubic bicontinuous liquid crystalline dispersions (cubosomes) using monoolein as molecular building block, phospholipids as stabilizers, propylene glycol as hydrotrope. Their kinetic stability was evaluated by analysing the backscattering profiles upon ageing, and the most stable formulation was chosen as potential photosensitizers delivery vehicle for photodynamic therapy (PDT) of human skin melanoma cells. Morphological and topological features of such formulation alternatively loaded with Chlorin e6 or meso-Tetraphenylporphine-Mn(III) chloride photosensitizing dyes were investigated by cryo-TEM, DLS, and SAXS. Bioimaging studies demonstrated that Me45 and MeWo cell lines effectively internalized these cubosomes formulations. Particularly, photodynamic activity experiments proved both the very low cytotoxicity of the cubosomes formulation loaded with Chlorin e6 dye in the "dark" condition, and its significant cytotoxic effect after photoirradiation. The toxic effect recorded when the photosensitizer was encapsulated within the cubosomes was shown to be one order of magnitude higher than that caused by the free photosensitizer. This is the first report of biocompatible polymer-free cubosomes for potential application in both PDT and bioimaging of skin malignant melanoma.

2-Arachidonoylglycerol: A signaling lipid with manifold actions in the brain

2-Arachidonoylglycerol (2-AG) is a signaling lipid in the central nervous system that is a key regulator of neurotransmitter release. 2-AG is an endocannabinoid that activates the cannabinoid CB₁ receptor. It is involved in a wide array of (patho)physiological functions, such as emotion, cognition, energy balance, pain sensation and neuroinflammation. In this review, we describe the biosynthetic and metabolic pathways of 2-AG and how chemical and genetic perturbation of these pathways has led to insight in the biological role of this signaling lipid. Finally, we discuss the potential therapeutic benefits of modulating 2-AG levels in the brain.

Experimental investigation on emission reduction in neem oil biodiesel using selective catalytic reduction and catalytic converter techniques

In the present study, non-edible seed oil namely raw neem oil was converted into biodiesel using transesterification process. In the experimentation, two biodiesel blends were prepared namely B25 (25% neem oil methyl ester with 75% of diesel) and B50 (50% neem oil methyl ester with 50% diesel). Urea-based selective catalytic reduction (SCR) technique with catalytic converter (CC) was fixed in the exhaust tail pipe of the engine for the reduction of engine exhaust emissions. Initially, the engine was operated with diesel as a working fluid and followed by refilling of biodiesel blends B25 and B50 to obtain the baseline readings without SCR and CC. Then, the same procedure was repeated with SCR and CC technique for emission reduction measurement in diesel, B25 and B50 sample. The experimental results revealed that the B25 blend showed higher break thermal efficiency (BTE) and exhaust gas temperature (EGT) with lower break-specific fuel consumption (BSFC) than B50 blend at all loads. On comparing with biodiesel blends, diesel experiences increased BTE of 31.9% with reduced BSFC of 0.29 kg/kWh at full load. A notable emission reduction was noticed for all test fuels in SCR and CC setup. At full load, B25 showed lower carbon monoxide (CO) of 0.09% volume, hydrocarbon (HC) of 24 ppm, and smoke of 14 HSU and oxides of nitrogen (NOx) of 735 ppm than diesel and B50 in SCR and CC setup. On the whole, the engine with SCR and CC setup showed better performance and emission characteristics than standard engine operation.

Manipulating the Ordered Nanostructure of Self-Assembled Monoolein and Phytantriol Nanoparticles with Unsaturated Fatty Acids

Mesophase structures of self-assembled lyotropic liquid crystalline nanoparticles are important factors that directly influence their ability to encapsulate and release drugs and their biological activities. However, it is difficult to predict and precisely control the mesophase behavior of these materials, especially in complex systems with several components. In this study, we report the controlled manipulation of mesophase structures of monoolein (MO) and phytantriol (PHYT) nanoparticles by adding unsaturated fatty acids (FAs). By using high throughput formulation and small-angle X-ray scattering characterization methods, the effects of FAs chain length, cis-trans isomerism, double bond location, and level of chain unsaturation on self-assembled systems are determined. Additionally, the influence of temperature on the phase behavior of these nanoparticles is analyzed. We found that in general, the addition of unsaturated FAs to MO and PHYT induces the formation of mesophases with higher Gaussian surface curvatures. As a result, a rich variety of lipid polymorphs are found to correspond with the increasing amounts of FAs. These phases include inverse bicontinuous cubic, inverse hexagonal, and discrete micellar cubic phases and microemulsion. However, there are substantial differences between the phase behavior of nanoparticles with trans FA, cis FAs with one double bond, and cis FAs with multiple double bonds. Therefore, the material library produced in this study will assist the selection and development of nanoparticle-based drug delivery systems with desired mesophase.

Non-lamellar lyotropic liquid crystalline nanoparticles enhance the antibacterial effects of rifampicin against Staphylococcus aureus

The fight against infection in an era of emerging antibiotic resistant bacteria is one of the grandest scientific challenges facing society today. Nano-carriers show great promise in improving the antibacterial activity of antibiotics as they are able to enhance their solubility, provide sustained release and reduce toxic side effects via specifically targeting infection sites. Here, we investigate the antibacterial effect of two lipidic nano-carriers that contain the poorly soluble antibiotic rifampicin in their bilayers. One nanoparticle is assembled solely from the lipid monoolein, thus is neutral at physiological pH and the other contains a mixture of monoolein and the cationic lipid N-[1-(2,3-Dioleoyloxy)propyl]-N,N,N-trimethylammonium methyl-sulfate (DOTAP), thus is positively charged. Our results show that rifampicin-loaded nanoparticles reduce the minimum inhibitory concentration against Staphylococcus aureus compared to rifampicin alone, however this reduction was most pronounced for the positively charged nanoparticles. Fluorescent microscopy revealed binding of all nanoparticles to the bacteria and enhanced binding was observed for the charged nanoparticles. This suggests that the cationic lipids promote electrostatic interactions with the negatively charged bacterial membrane. Förster resonance energy transfer demonstrated that the cationic charged nanoparticles were able to fuse with bacterial membranes whilst atomic force microscopy and transmission electron microscopy revealed structural damage to the bacterial membranes caused by the nanoparticles. Significantly, we identified a concentration window in which the nanoparticles exhibited antibacterial activity while not affecting HeLa and CHO cell viability. This ability to improve the efficacy of antibiotics without affecting their eukaryotic cytotoxicity is of significant importance for future development of nanomedicine based strategies to combat infections.

Gel-Phase-like Ordered Membrane Properties Observed in Dispersed Oleic Acid/1-Oleoylglycerol Self-Assemblies: Systematic Characterization Using Raman Spectroscopy and a Laurdan Fluorescent Probe

Aqueous dispersions of oleic acid (OA) and those modified with 1-oleoylglycerol (monoolein, MO) form various kinds of self-assembled structures: micelles, vesicles, oil-in-water (O/W) emulsions, hexagonal phases, and dispersed cubic phases. Conventionally, these self-assembled structures have been characterized using cryogenic transmission electron microscopy or X-ray diffraction spectroscopy. However, these methodologies require specialized treatment before they can be used, which may lead to the self-assemblies not adopting their true equilibrium state. Herein, we systematically characterized the self-assemblies composed of OA and MO in aqueous solution using Raman spectroscopy and fluorescent probe 6-dodecanoyl-2-dimethylaminonaphthalene (Laurdan). The OA/MO dispersions at pH 5.0 showed increased chain packing in comparison to the OA micelle at pH 11 or OA vesicle at pH 9.0, which were characterized by the intensity ratio of the Raman peaks at 2850 and 2890 cm^-1, R = I₂₈₉₀/I₂₈₅₀. In the Laurdan fluorescence measurements, the obtained spectra were deconvoluted to two peak fractions (A₁: λ_em= 490 nm; A₂: λ_em = 440 nm), and the peak area ratio, A₁/(A₁ + A₂), was defined as the membrane hydrophilicity Ø_m. The Ø_m value of the OA/MO dispersion at pH 5.0 was similar to that of the OA O/W emulsion, indicating that the membrane surfaces of these self-assemblies were relatively dehydrated compared to the OA micelle or OA vesicle. To categorize the type of self-assembly dispersion, a Cartesian diagram plot was systematically drawn: R on the x axis and Ø_m on the y axis, with the cross point at x = 1, y = 0.5. By comparing the membrane properties of the OA-based micelles, O/W emulsions, and dispersed cubic phases, we determined that the OA/MO dispersion at pH 5.0 possessed higher chain packing (R > 1) and a dehydrated membrane surface (Ø_m < 0.5), which is similar to that of the ordered membranes in gel phases. This characterization method can be useful in evaluating the ordered membrane properties in dispersed self-assemblies in aqueous media.

Comparative studies on the performance and emissions of a direct injection diesel engine fueled with neem oil and pumpkin seed oil biodiesel with and without fuel preheater

In the present experimental analysis, two non-edible oils namely neem oil and pumpkin seed oil were considered. They are converted into respective biodiesels namely neem oil methyl ester (B1) and pumpkin seed oil methyl ester (B2) through transesterification process and their physical and chemical properties were examined using ASTM standards. Diesel was used as a baseline fuel in Kirloskar TV1 model direct injection four stroke diesel engine. A fuel preheater was designed and fabricated to operate at various temperatures (60, 70, and 80 °C). Diesel showed higher brake thermal efficiency (BTE) than biodiesel samples. Lower brake specific fuel consumption (BSFC) was obtained with diesel than B1 sample. B1 exhibited lower BSFC than B2 sample without preheating process. High preheating temperature (80 °C) results in lower fuel consumption for B1 sample. The engine emission characteristics like carbon monoxide (CO), hydrocarbon (HC), and smoke were found lower with B1 sample than diesel and B2 except oxides of nitrogen (NOx) emission. In preheating of fuel, B1 sample with high preheating temperature showed lower CO, HC, and smoke emission (except NOx) than B2 sample.

Natural Organochlorines as Precursors of 3-Monochloropropanediol Esters in Vegetable Oils

During high-temperature refining of vegetable oils, 3-monochloropropanediol (3-MCPD) esters, possible carcinogens, are formed from acylglycerol in the presence of a chlorine source. To investigate organochlorine compounds in vegetable oils as possible precursors for 3-MCPD esters, we tested crude palm, soybean, rapeseed, sunflower, corn, coconut, and olive oils for the presence of organochlorine compounds. Having found them in all vegetable oils tested, we focused subsequent study on oil palm products. Analysis of the chlorine isotope mass pattern exhibited in high-resolution mass spectrometry enabled organochlorine compound identification in crude palm oils as constituents of wax esters, fatty acid, diacylglycerols, and sphingolipids, which are produced endogenously in oil palm mesocarp throughout ripening. Analysis of thermal decomposition and changes during refining suggested that these naturally present organochlorine compounds in palm oils and perhaps in other vegetable oils are precursors of 3-MCPD esters. Enrichment and dose-response showed a linear relationship to 3-MCPD ester formation and indicated that the sphingolipid-based organochlorine compounds are the most active precursors of 3-MCPD esters.

Low Molecular Weight Chitosan-Insulin Complexes Solubilized in a Mixture of Self-Assembled Labrosol and Plurol Oleaque and Their Glucose Reduction Activity in Rats

Oral insulin delivery that better mimics physiological pathways is a necessity as it ensures patient comfort and compliance. A system which is based on a vehicle of nano order where positively charged chitosan interacts with negatively charged insulin and forms a polyelectrolyte complex (PEC) solubilizate, which is then solubilized into an oily phase of oleic acid, labrasol, and plurol oleaque-protects insulin against enzymatic gastrointestinal reduction. The use of an anionic fatty acid in the oily phase, such as oleic acid, is thought to allow an interaction with cationic chitosan, hence reducing particle size. Formulations were assessed based on their hypoglycaemic capacities in diabetic rats as compared to conventional subcutaneous dosage forms. 50 IU/kg oral insulin strength could only induce blood glucose reduction equivalent to that of 5 IU/kg (1 International unit = 0.0347 mg of human insulin). Parameters that influence the pharmacological availability were evaluated. A preliminary investigation of the mechanism of absorption suggests the involvement of the lymphatic route.

Topical Delivery of Erythromycin Through Cubosomes for Acne

BACKGROUND

Topical delivery is an attractive route for local and systemic treatment. The novel topical application has many advantages like averting the GI-irritation, preventing the metabolism of drugs in the liver and increasing the bioavailability of the drug over the conventional dosage forms.

OBJECTIVE

The aim of present work was to prepare and characterized erythromycin encapsulated cubosomes using different concentrations of glyceryl monooleate and poloxamer 407 by the emulsification method.

METHODS

The prepared dispersion of cubosomes was characterized for surface morphology, particle size, entrapment efficiency and in vitro release. Further, optimized formulation was converted to cubosomal gel by incorporating carbopol 934 at different concentrations. The prepared gel was characterized for homogeneity, pH, viscosity, spreadibility, drug content and in vitro drug release study.

RESULTS

The result of optimized cubosomes showed average particle size of 264.5±2.84nm and entrapment efficiency about 95.29±1.32 % and the pH of optimized cubosomal was found to be 6.5, viscosity 2475-8901(cp), drug content 95.29% and the spreadability was found to be 11.74 gm.cm/sec. The in vitro drug release kinetics of optimized formulation was found to follow Korsmeyer peppas model having highest R2 value 0.835 and in vitro drug release of optimized erythromycin loaded cubosomal gel and plain drug gel in 24 hr was found to be 89.91±0.73 and 88.64±2.16, while in 36 hr plain drug gel and cubosomal gel showed drug release about 87.64±0.97 and 91.55±1.09, and sustained release was obtained after 24 hr in case of cubosomal gel.

CONCLUSION

Thus, as a whole it can be concluded that erythromycin loaded cubosomes are effective in topically delivering drug in sustained and non-invasive manner for treatment and prevention of acne.

Phytosterol-based oleogels self-assembled with monoglyceride for controlled volatile release

BACKGROUND

Oleogels have recently emerged as a subject of growing interest among industrial and academic researchers as an alternative to saturated/trans-fat and delivery of functional ingredients. Phytosterols, comprising plant-derived natural steroid compounds, are preferred for oleogel production because they are both natural and healthy. In the present study, phytosterol-based oleogels self-assembled with monoglyceride were studied with respect to tuning volatile release.

RESULTS

Microscopy images of the bicomponent oleogels of β-sitosterol and monoglyceride showed the formation of a new three-dimensional network of entangled crystals and a controllable microstructure. Our analysis from differential scanning calorimetry and small angle X-ray scattering results suggests the self-assembly of β-sitosterol and monoglyceride via intermolecular hydrogen bonds into spherulitic microstructures. The results showed that the release rate (v₀ ), maximum headspace concentrations (C_max ) and partition coefficients (k_a/o ) for oleogels showed a significantly controlled release and were tunable via the microstructure of phytosterol-based oleogels under both dynamic and static conditions. In addition, the solid-like oleogels had interesting thixotropic and thermoresponsive behaviors, probably as a result of intermolecular hydrogen bonding.

CONCLUSION

The self-assembly of phytosterol-based oleogels with monoglyceride was attributed to intermolecular hydrogen and is demonstrated to be a promising tunable and functional strategy for delivering flavor compounds. © 2017 Society of Chemical Industry.

Self-Assembled Lipid Nanoparticles for Oral Delivery of Heparin-Coated Iron Oxide Nanoparticles for Theranostic Purposes

Recently, solid lipid nanoparticles (SLNs) have attracted increasing attention owing to their potential as an oral delivery system, promoting intestinal absorption in the lymphatic circulation which plays a role in disseminating metastatic cancer cells and infectious agents throughout the body. SLN features can be exploited for the oral delivery of theranostics. Therefore, the aim of this work was to design and characterise self-assembled lipid nanoparticles (SALNs) to encapsulate and stabilise iron oxide nanoparticles non-covalently coated with heparin (Fe@hepa) as a model of a theranostic tool. SALNs were characterised for physico-chemical properties (particle size, surface charge, encapsulation efficiency, in vitro stability, and heparin leakage), as well as in vitro cytotoxicity by methyl thiazole tetrazolium (MTT) assay and cell internalisation in CaCo-2, a cell line model used as an indirect indication of intestinal lymphatic absorption. SALNs of about 180 nm, which are stable in suspension and have a high encapsulation efficiency (>90%) were obtained. SALNs were able to stabilise the heparin coating of Fe@hepa, which are typically unstable in physiological environments. Moreover, SALNs–Fe@hepa showed no cytotoxicity, although their ability to be internalised into CaCo-2 cells was highlighted by confocal microscopy analysis. Therefore, the results indicated that SALNs can be considered as a promising tool to orally deliver theranostic Fe@hepa into the lymphatic circulation, although further in vivo studies are needed to comprehend further potential applications.

Inflammation Modulatory Phorbol Esters from the Seeds of Aquilaria malaccensis

The tree Aquilaria malaccensis is a valuable source of agarwood, which is used in herbal medicinal preparations. Phytochemical research on A. malaccensis seeds has led to the isolation of four new phorbol esters (1-4), two known phorbol esters (5, isolated from Nature for the first time, and 6), and two known glycerides (7 and 8). The structures of these isolates were elucidated by means of spectroscopic data interpretation. The inflammation-modulatory activities of the isolates on elastase release and superoxide anion generation in human neutrophils were evaluated. Interestingly, phorbol esters 1, 5, and 6 showed potent inhibitory activity on elastase release in human neutrophils, with IC₅₀ values of 2.7, 0.8, and 2.1 μM, respectively. All isolated phorbol esters exerted enhancing activity on superoxide anion generation. The results indicated that phorbol esters may play a bilateral modulatory role in the processes of inflammation. In addition, the compounds were evaluated for their cytotoxic properties against HepG2 (hepatoma), MDA-MB-231 (breast), and A549 (lung) cancer cells, but all compounds were inactive for all cell lines used (IC₅₀ > 10 μM).

Enhanced oral bioavailability of valsartan using a polymer-based supersaturable self-microemulsifying drug delivery system

A novel, supersaturable self-microemulsifying drug delivery system (S-SMEDDS) was successfully formulated to enhance the dissolution and oral absorption of valsartan (VST), a poorly water-soluble drug, while reducing the total quantity for administration. Poloxamer 407 is a selectable, supersaturating agent for VST-containing SMEDDS composed of 10% Capmul® MCM, 45% Tween® 20, and 45% Transcutol® P. The amounts of SMEDDS and Poloxamer 407 were chosen as formulation variables for a 3-level factorial design. Further optimization was established by weighting different levels of importance on response variables for dissolution and total quantity, resulting in an optimal S-SMEDDS in large quantity (S-SMEDDS_LQ; 352 mg in total) and S-SMEDDS in reduced quantity (S-SMEDDS_RQ; 144.6 mg in total). Good agreement was observed between predicted and experimental values for response variables. Consequently, compared with VST powder or suspension and SMEDDS, both S-SMEDDS_LQ and S-SMEDDS_RQ showed excellent in vitro dissolution and in vivo oral bioavailability in rats. The magnitude of dissolution and absorption-enhancing capacities using quantity-based comparisons was in the order S-SMEDDS_RQ > S-SMEDDS_LQ > SMEDDS > VST powder or suspension. Thus, we concluded that, in terms of developing an effective SMEDDS preparation with minimal total quantity, S-SMEDDS_RQ is a promising candidate.

Influence of Cubosome Surface Architecture on Its Cellular Uptake Mechanism

Interaction of nanoparticles with biological systems is a key factor influencing their efficacy as a drug delivery vehicle. The inconsistency in defining the optimal design parameters across different nanoparticle types suggests that information gained from one model system need not apply to other systems. Therefore, selection of a versatile model system is critical for such studies. Cubosomes are one of the potential drug delivery vehicles due to their biocompatibility, stability, ability to carry hydrophobic, hydrophilic, and amphiphilic drugs, and ease of surface modification. Here we report the importance of surface architecture of cubosomes by comparing their cellular uptake mechanism with poly-ε-lysine (PεL)-coated cubosomes. Uncoated cubosomes entered cells by an energy-independent, cholesterol-dependent mechanism, whereas PεL-coated cubosomes relied on energy-dependent mechanisms to enter the endosomes. As endosomal entrapment was evaded by uncoated cubosomes, they can be preferably used for cytosolic delivery of therapeutic agents.

Effects of Carriers, Emulsifiers, and Biopesticides for Direct Silk Treatments on Caterpillar Feeding Damage and Ear Development in Sweet Corn

In the northeastern United States, control of Lepidopteran pests of sweet corn, particularly corn earworm [Helicoverpa zea (Boddie)], is difficult using organic methods. The direct application of corn oil and Bacillus thuringiensis (Bt) to corn silk has been shown to reduce ear damage from corn earworm in past studies; these studies sought to optimize this method by evaluating additional carrier and biopesticide mixtures that comply with the United States Federal Insecticide, Fungicide, and Rodenticide Act and National Organic Standards. Carriers, which are liquids used to dissolve the biopesticide and deliver it into the tip of the ear, may have phytotoxic or insecticidal properties. Experiments conducted from 2001 to 2005 evaluated caterpillar damage and ear development effects from carriers (vegetable and paraffinic oils and carrageenan), biopesticides (Bt, spinsosad, and neem), and three emulsifiers in various combinations when applied directly to the tips of the ears 5-7 d after silk initiation. There were no effects of emulsifiers on ear quality, except for slight reduction in caterpillar damage in one of the two years. There were no differences among corn, soy, canola, and safflower oils in corn earworm control or tip development. The carrageenan carrier had the least effect upon ear development as measured by the length of nonpollinated kernels at the tip, compared to corn oil or paraffinic oil (JMS Stylet Oil), which caused the greatest tip damage as well as an oily discoloration. The carrier-pesticide combinations with the best ear quality overall were spinosad in carrageenan or corn oil, and Bt in carrageenan.

Transdermal delivery of atorvastatin calcium from novel nanovesicular systems using polyethylene glycol fatty acid esters: Ameliorated effect without liver toxicity in poloxamer 407-induced hyperlipidemic rats

CONTEXT

Atorvastatin calcium (ATV), a cholesterol-lowering agent, suffers from poor systemic availability (14%) after oral administration in addition to other side effects on the gastrointestinal tract, liver and muscle.

OBJECTIVE

The goal of the present investigation was to improve ATV bioavailability and overcome complications attendant with peroral administration by developing a new nanovesicular system encapsulating ATV for its delivery via the transdermal route.

METHODS

The vesicular systems were prepared by incorporating different polyethylene glycol fatty acid esters such as Labrasol, Cremophor EL, Gelucire 44/14 and Tween 80 as edge activators (EAs) in the lipid bilayer. The effect of the phosphatidylcholine (PC):EA molar ratio on the physicochemical properties of the vesicles was investigated. The pharmacokinetic studies of the optimized formulation were evaluated in rats. The optimized formulation was tested in poloxamer 407-induced hyperlipidemic rats. The plasma lipid profile, activity of liver enzymes, and oxidative stress parameters were measured using commercially available kits.

RESULTS

The results revealed high ATV entrapment efficiency (EE%) ranging from 55.62 to 83.91%. The formulations that contained Labrasol showed the highest EE%. The mean diameter of the vesicles was in the range of 186-583nm. T8 containing Gelucire 44/14 as an EA in the molar ratio of 15:1 (PC:EA) gave the smallest size and exhibited the best permeation parameters across the skin. The pharmacokinetic studies revealed that about three times statistically significant (p<0.05) improvement in bioavailability, after transdermal administration of nanotransfersomal ATV gel compared to oral ATV suspension. The transdermal vesicular system exhibited a significant decrease in plasma total cholesterol, triglycerides and LDL cholesterol comparable to oral ATV. Additionally, it lowered the malondialdehyde levels in plasma and abolished the increase in liver enzyme activity.

CONCLUSION

The results obtained suggest that the proposed transdermal vesicular system can serve as a promising alternative means for delivery of ATV.

Correlating Membrane Morphological Responses with Micellar Aggregation Behavior of Capric Acid and Monocaprin

The interaction of single-chain lipid amphiphiles with phospholipid membranes is relevant to many scientific fields, including molecular evolution, medicine, and biofuels. Two widely studied compounds within this class are the medium-chain saturated fatty acid, capric acid, and its monoglyceride derivative, monocaprin. To date, most studies about these compounds have involved in vitro evaluation of their biological activities, while mechanistic details of how capric acid and monocaprin interact with phospholipid bilayers remain elusive. Herein, we investigated the effect of these two compounds on the morphological and fluidic properties of prefabricated, supported lipid bilayers (SLBs). The critical micelle concentration (CMC) of each compound was determined by fluorescence spectroscopy measurements. At or above its CMC, capric acid induced the formation of elongated tubules protruding from the SLB, as determined by quartz crystal microbalance-dissipation and fluorescence microscopy experiments. By contrast, monocaprin induced the formation of elongated tubules or membrane buds below and above its CMC, respectively. Fluorescence recovery after photobleaching (FRAP) experiments indicated that capric acid increased bilayer fluidity only above its CMC, whereas monocaprin increased bilayer fluidity both above and below its CMC. We discuss these findings in the context of the two compounds' structural properties, including net charge, molecular length and hydrogen-bonding capacity. Collectively, the findings demonstrate that capric acid and monocaprin differentially affect the morphological and fluidic properties of SLBs, and that the aggregation state of the compounds plays a critical role in modulating their interactions with phospholipid membranes.