Enhancing Nucleic Acid Delivery with Ultrasound and Microbubbles

Ultrasound-Induced Microbubble Cavitation for Targeted Delivery of MiR-29b Mimic to Treat Cardiac Fibrosis

OBJECTIVE

Cardiac fibrosis contributes to adverse ventricular remodeling and is associated with loss of miR-29b. Overexpression of miR-29b via plasmid or intravenous injection of microRNA mimic has blunted fibrosis, but these are inefficient and non-targeted delivery strategies. In this study, we tested the hypothesis that delivery of microRNA-29b (miR-29b) using ultrasound-targeted microbubble cavitation (UTMC) of miR-29b-loaded microbubbles would attenuate cardiac fibrosis and preserve left ventricular (LV) function.

METHODS

Lipid microbubbles were loaded with miR-29b mimic (miR-29b-MB) or negative control (NC) mimic (NC-MB), placed with cardiac fibroblasts (CFs) and treated with pulsed ultrasound. Cells were harvested to measure downstream fibrotic mediators. Mice received angiotensin II (ANG II) infusion causing afterload increase and direct ANG II-induced cardiac fibrosis. UTMC of miRNA-loaded microbubbles was administered to the heart at days 0, 3 and 7. Serial echocardiography was performed, and hearts were harvested on day 10.

RESULTS

UTMC treatment of CFs with miR-29b-MB increased miR-29b and decreased fibrotic transcripts compared with NC-MB treatment. In vivo UTMC + NC-MB led to increased LV mass, reduction in cardiac function and increase in fibrotic markers, demonstrating ANGI II-induced adverse cardiac remodeling. Mice treated with UTMC + miR-29b-MB had preservation of cardiac function, downregulation of cardiac fibrillin and trends of lower COL1A1, COL1A2 and COL3 mRNA and decreased cardiac α-smooth muscle protein.

CONCLUSION

UTMC-mediated delivery of miR-29b mimic blunts expression of fibrosis markers and preserves LV function in ANG II-induced cardiac fibrosis.

Delivery of synthetic mRNAs for tissue regeneration

In recent years, nucleic acid-based therapeutics have gained increasing importance as novel treatment options for disease prevention and treatment. Synthetic messenger RNAs (mRNAs) are promising nucleic acid-based drugs to transiently express desired proteins that are missing or defective. Recently, synthetic mRNA-based vaccines encoding viral proteins have been approved for emergency use against COVID-19. Various types of vehicles, such as lipid nanoparticles (LNPs) and liposomes, are being investigated to enable the efficient uptake of mRNA molecules into desired cells. In addition, the introduction of novel chemical modifications into mRNAs increased the stability, enabled the modulation of nucleic acid-based drugs, and increased the efficiency of mRNA-based therapeutic approaches. In this review, novel and innovative strategies for the delivery of synthetic mRNA-based therapeutics for tissue regeneration are discussed. Moreover, with this review, we aim to highlight the versatility of synthetic mRNA molecules for various applications in the field of regenerative medicine and also discuss translational challenges and required improvements for mRNA-based drugs.

Scaleable production of microbubbles using an ultrasound-modulated microfluidic device

Surfactant-coated gas microbubbles are widely used as contrast agents in ultrasound imaging and increasingly in therapeutic applications. The response of microbubbles to ultrasound can be strongly influenced by their size and coating properties, and hence the production method. Ultrasonic emulsification (sonication) is the most commonly employed method and can generate high concentrations of microbubbles rapidly, but with a broad size distribution, and there is a risk of contamination and/or degradation of sensitive components. Microfluidic devices provide excellent control over microbubble size, but are often challenging or costly to manufacture, offer low production rates (<10⁶s^-1), and are prone to clogging. In this study, a hybrid sonication-microfluidic or "sonofluidic" device was developed. Bubbles of ∼180 μm diameter were produced rapidly in a T-junction and subsequently exposed to ultrasound (71-73 kHz) within a microchannel, generating microbubbles (mean diameter: 1-2 μm) at a rate of >10⁸s^-1 using a single device. Microbubbles were prepared using either the sonofluidic device or conventional sonication, and their size, concentration, and stability were comparable. The mean diameter, concentration, and stability were found to be comparable between techniques, but the microbubbles produced by the sonofluidic device were all <5 μm in diameter and thus did not require any post-production fractionation.

Opening doors with ultrasound and microbubbles: Beating biological barriers to promote drug delivery

Apart from its clinical use in imaging, ultrasound has been thoroughly investigated as a tool to enhance drug delivery in a wide variety of applications. Therapeutic ultrasound, as such or combined with cavitating nuclei or microbubbles, has been explored to cross or permeabilize different biological barriers. This ability to access otherwise impermeable tissues in the body makes the combination of ultrasound and therapeutics very appealing to enhance drug delivery in situ. This review gives an overview of the most important biological barriers that can be tackled using ultrasound and aims to provide insight on how ultrasound has shown to improve accessibility as well as the biggest hurdles. In addition, we discuss the clinical applicability of therapeutic ultrasound with respect to the main challenges that must be addressed to enable the further progression of therapeutic ultrasound towards an effective, safe and easy-to-use treatment tailored for drug delivery in patients.

General Characteristics of Microbubble-Adenovirus Vectors Carrying Genes

Introduction

Transferring genes safely, targeting cells and achieving efficient transfection are urgent problems in gene therapy that need to be solved. Combining microbubbles (MBs) and viruses to construct double vectors has become a promising approach for gene delivery. Understanding the characteristic performance of MBs that carry genes is key to promoting effective gene transfer. Therefore, in this study, we constructed MB-adenovirus vectors and discussed their general characteristics.

Methods

We constructed MB-adenovirus vectors carrying the chemokine (C-X-C motif) ligand 12 (Cxcl12) and bone morphogenetic protein-2 (Bmp2) genes (pAd-Cxcl12 and pAd-Bmp2, respectively) to explore the general characteristics of double vectors carrying genes.

Results

The MB-adenovirus vectors had stable physical properties, and no significant differences in diameter, concentration, or pH were noted compared with naked MBs (p > 0.05). Flow cytometry and RT-PCR were used to detect the gene-loading capacity of MBs. The gene-loading efficiency of MBs increased with increasing virus amounts and was highest (91%) when 10.0 µL of virus was added. Beyond 10.0 µL of added virus, the gene-loading efficiency of MBs decreased with the continuous addition of virus. The maximum amounts of pAd-Cxcl12 and pAd-Bmp2 in 100 µL of MBs were approximately 14 and 10 µL, respectively.

Conclusions

This study indicates that addition of an inappropriate viral load will result in low MB loading efficiency, and the maximum amount of genes loaded by MBs may differ based on the genes carried by the virus.

STAT3 decoy oligonucleotide-carrying microbubbles with pulsed ultrasound for enhanced therapeutic effect in head and neck tumors

Signal transducer and activator of transcription-3 (STAT3) is an oncogenic transcription factor implicated in carcinogenesis, tumor progression, and drug resistance in head and neck squamous cell carcinoma (HNSCC). A decoy oligonucleotide targeting STAT3 offers a promising anti-tumor strategy, but achieving targeted tumor delivery of the decoy with systemic administration poses a significant challenge. We previously showed the potential for STAT3 decoy-loaded microbubbles, in conjunction with ultrasound targeted microbubble cavitation (UTMC), to decrease tumor growth in murine squamous cell carcinoma. As a next step towards clinical translation, we sought to determine the anti-tumor efficacy of our STAT3 decoy delivery platform against human HNSCC and the effect of higher STAT3 decoy microbubble loading on tumor cell inhibition. STAT3 decoy was loaded on cationic lipid microbubbles (STAT3-MB) or loaded on liposome-conjugated lipid microbubbles to form STAT3-loaded liposome-microbubble complexes (STAT3-LPX). UTMC treatment efficacy with these two formulations was evaluated in vitro using viability and apoptosis assays in CAL33 (human HNSCC) cells. Anti-cancer efficacy in vivo was performed in a CAL33 tumor murine xenograft model. UTMC with STAT3-MB caused significantly lower CAL33 cell viability compared to UTMC with STAT3-LPX (56.8±8.4% vs 84.5±8.8%, respectively, p<0.05). In vivo, UTMC with STAT3-MB had strong anti-tumor effects, with significantly less tumor burden and greater survival compared to that of UTMC with microbubbles loaded with a mutant control decoy and untreated control groups (p<0.05). UTMC with STAT3 decoy-loaded microbubbles significantly decreases human HNSSC tumor progression. These data set the stage for clinical translation of our microbubble platform as an imaged-guided, targeted delivery strategy for STAT3 decoy, or other nucleotide-based therapeutics, in human cancer treatment.

Inhibitory effect of 5-FU loaded ultrasound microbubbles on tumor growth and angiogenesis

The anti-neovascularization treatment is one of the effective strategies for tumor molecular target therapy. At present, the target and effect of the anti-neovascularization treatment is limited, and it is urgent to establish a new vascular targeting strategy to effectively treat tumors. In this work, we used high intensity focused ultrasound (HIFU) combined with targeted microbubbles to establish a molecular targeted ultrasound response microbubble for neovascular cells. Furthermore, the effects of drug loaded microbubbles on neovascularization and tumor cells were studied. The tumor vascular targeted and ultrasound-responsive microbubbles of 5-FU@DLL4-MBs were prepared by the thin-film dispersion method. The size and zeta potential of 5-FU@DLL4-MBs was about 1248 nm and -9.1 mV. 5-FU@DLL4-MBs released 5-FU showed an ultrasound-responsive manner, and had better vascular-targeting ability. Furthermore, the 5-FU@DLL4-MBs showed the strongest cytotoxic effect on HUVECs or HepG-2 cells and can be effectively internalized into the HUVECs cells. Thus, 5-FU@DLL4-MBs combined with HIFU can be considered as a potential method for antitumor angiogenesis in the future.

Ultrasound-responsive lipid microbubbles for drug delivery: A review of preparation techniques to optimise formulation size, stability and drug loading

Lipid-shelled microbubbles have received extensive interest to enhance ultrasound-responsive drug delivery outcomes due to their high biocompatibility. While therapeutic effectiveness of microbubbles is well established, there remain limitations in sample homogeneity, stability profile and drug loading properties which restrict these formulations from seeing widespread use in the clinical setting. In this review, we evaluate and discuss the most encouraging leads in lipid microbubble design and optimisation. We examine current applications in drug delivery for the systems and subsequently detail shell compositions and preparation strategies that improve monodispersity while retaining ultrasound responsiveness. We review how excipients and storage techniques help maximise stability and introduce different characterisation and drug loading techniques and evaluate their impact on formulation performance. The review concludes with current quality control measures in place to ensure lipid microbubbles can be reproducibly used in drug delivery.