Separation of natural products by countercurrent chromatography

Coumarins from Jinhua Finger Citron: Separation by Liquid-Liquid Chromatography and Potential Antitumor Activity

In this paper, liquid-liquid chromatography was introduced for the first time for the separation of fingered citron (Citrus medica L. var. sarcodactylis Swingle). The fingered citron cultivated in Jinhua is of significant industrial and medicinal value, with several major coumarin compounds detected in its extract. Therefore, further separation for higher purity was of necessity. A preparative liquid-liquid chromatographic method was developed by combining two elution modes (isocratic and step-gradient) with selection according to different polarities of the target sample. Five coumarin derivatives-5,7-dimethoxycoumarin (52.6 mg, 99.6%), phellopterin (4.9 mg, 97.1%), 5-prenyloxy-7-methoxycoumarin (6.7 mg, 98.7%), 6-hydroxy-7-methoxycoumarin (7.1 mg, 82.2%), and byakangelicol (10.5 mg, 90.1%)-with similar structures and properties were isolated on a large scale from 100 mg of petroleum ether (PE) extract and 100 mg of ethyl acetate (EA) extract in Jinhua fingered citron. The productivity was much improved. The anti-growth activity of the isolated coumarins was evaluated against three cancer cell lines (HeLa, A549, and MCF7) with an MTT assay. The coumarins demonstrated potential anti-tumor activity on the HeLa cell line, with 5,7-dimethoxycoumarin in particular exhibiting the best anti-growth activity (IC50 = 10.57 ± 0.24 μM) by inhibiting proliferation. It inhibited colony formation and reduced the size of the tumor sphere in a concentration-dependent manner. The main mechanism was confirmed as inducing apoptosis. This work was informative for further studies aimed at exploring new natural-product-based antitumor agents.

Efficient Separation of the Methoxyfuranocoumarins Peucedanin, 8-Methoxypeucedanin, and Bergapten by Centrifugal Partition Chromatography (CPC)

Pure methoxyfuranocoumarins were isolated from a crude petroleum ether extract (CPE; Soxleth extraction efficiency 12.28%) from fruits of Peucedanum tauricum MB. (Apiaceae) by counter-current chromatography in a hydrostatic equilibrium system (centrifugal partition chromatography-CPC). The optimized biphasic solvent system composed of n-heptane-ethyl acetate-methanol-water (5:2:5:2; v/v/v/v) in the ascending mode of elution was used (3 mL/min, 1600 rpm). In the single run, peucedanin (P), 8-methoxypeucedanin (8MP), and bergapten (5MOP) were obtained as pure as 95.6%, 98.1%, and c.a. 100%, respectively. The carefully optimized and developed CPC was effectively transferred from the analytical to the semi-preparative scale (where 20 mg and 150 mg of CPE were loaded, respectively). Identification and quantitative analysis of methoxyfuranocoumarins was carried out in the plant material, in the CPE, and in individual CPC fractions by use of validated high-performance liquid chromatography with diode array detection and mass spectrometry (HPLC-DAD-ESI-MS). For the separation steps, the extraction/isolation recovery was calculated. In this case, CPC proved to be an effective tool for the simultaneous isolation and separation of P, 8MP, and 5MOP from a multicomponent plant matrix, without additional pre-purification steps. The high purity of the obtained plant metabolites makes it possible to consider their use in pharmacological or biological studies.

A convenient separation strategy for fungal anthraquinones by centrifugal partition chromatography

As recently shown, some fungal pigments exhibit significant photoactivity turning them into promising agents for the photodynamic treatment of microbial infections or malignant diseases. In the present study, a separation strategy for fungal anthraquinones was developed based on centrifugal partition chromatography. A suitable method was explored employing a methanolic extract of the fruiting bodies of Cortinarius sanguineus (Agaricales, Basidiomycota). An excellent fractionation was achieved using a biphasic solvent system comprising chloroform/ethyl acetate/methanol/water/acetic acid (3:1:3:2:1, v/v/v/v/v) operating in ascending mode. Experiments on an analytical scale with extracts of closely related Cortinarius species exhibited broad applicability of the devised system. Up to six pigments could be purified directly from the crude extract. Preparative-scale fractionation of the methanol extracts of C. malicorius and C. sanguineus demonstrated that up-scaling was possible without compromising selectivity.

Advantages of rectangular horizontal tubing in the semi-preparative counter-current chromatography bobbin

Counter-current chromatography (CCC) is a widely used liquid-liquid separation technique. Much work has been performed to improve the retention of stationary phases and throughput. In previous research, high aspect ratio rectangular horizontal (RH) tubing has been proven to be able to improve resolution and throughput in comparison with standard circular (SC) tubing. However, those modifications and improvements of tubing shapes have only been tested on analytical tubing thus far. This study aims to verify whether RH tubing could achieve similar high stationary phase retention (Sf) and throughput on a semi-preparative CCC apparatus. First, a lighter and larger volume semi-preparative bobbin with thin-wall RH tubing was successfully manufactured. Then the Sf of this bobbin was tested with n-hexane-ethyl acetate-methanol-water (HEMWat) and dichloromethane-methanol-water (DMW) solvent systems, and its maximum throughput was explored with the mixture of Magnolia officinalis Rehd. Et Wils. The results show that the thin-wall RH tubing bobbin can retain high Sf for these solvent systems, even at a relatively high mobile phase flow rate, which is consistent with the analytical bobbin results. The throughput test demonstrates that 2.12 × throughput can be obtained with the RH tubing column bobbin compared to the conventional SC tubing column bobbin without changing the outside dimensions of the bobbin. The present study is a necessary step for the application of the RH tubing bobbin from a laboratory analytical scale to preparative industrial scale.

The isolation of water-soluble natural products - challenges, strategies and perspectives

Covering period: up to 2019Water-soluble natural products constitute a relevant group of secondary metabolites notably known for presenting potent biological activities. Examples are aminoglycosides, β-lactam antibiotics, saponins of both terrestrial and marine origin, and marine toxins. Although extensively investigated in the past, particularly during the golden age of antibiotics, hydrophilic fractions have been less scrutinized during the last few decades. This review addresses the possible reasons on why water-soluble metabolites are now under investigated and describes approaches and strategies for the isolation of these natural compounds. It presents examples of several classes of hydrosoluble natural products and how they have been isolated. Novel stationary phases and chromatography techniques are also reviewed, providing a perspective towards a renaissance in the investigation of water-soluble natural products.

Analytical, Preparative, and Industrial-Scale Separation of Substances by Methods of Countercurrent Liquid-Liquid Chromatography

Countercurrent liquid-liquid chromatographic techniques (CCC), similar to solvent extraction, are based on the different distribution of compounds between two immiscible liquids and have been most widely used in natural product separations. Due to its high load capacity, low solvent consumption, the diversity of separation methods, and easy scale-up, CCC provides an attractive tool to obtain pure compounds in the analytical, preparative, and industrial-scale separations. This review focuses on the steady-state and non-steady-state CCC separations ranging from conventional CCC to more novel methods such as different modifications of dual mode, closed-loop recycling, and closed-loop recycling dual modes. The design and modeling of various embodiments of CCC separation processes have been described.

Selection and characterization of botanical natural products for research studies: a NaPDI center recommended approach

Covering: up to the end of 2018 Dietary supplements, which include botanical (plant-based) natural products, constitute a multi-billion-dollar industry in the US. Regulation and quality control for this industry is an ongoing challenge. While there is general agreement that rigorous scientific studies are needed to evaluate the safety and efficacy of botanical natural products used by consumers, researchers conducting such studies face a unique set of challenges. Botanical natural products are inherently complex mixtures, with composition that differs depending on myriad factors including variability in genetics, cultivation conditions, and processing methods. Unfortunately, many studies of botanical natural products are carried out with poorly characterized study material, such that the results are irreproducible and difficult to interpret. This review provides recommended approaches for addressing the critical questions that researchers must address prior to in vitro or in vivo (including clinical) evaluation of botanical natural products. We describe selection and authentication of botanical material and identification of key biologically active compounds, and compare state-of-the-art methodologies such as untargeted metabolomics with more traditional targeted methods of characterization. The topics are chosen to be of maximal relevance to researchers, and are reviewed critically with commentary as to which approaches are most practical and useful and what common pitfalls should be avoided.

Sweet spot matching: A thin-layer chromatography-based countercurrent solvent system selection strategy

TLC-based strategies were proposed in 1979 (Hostettmann et al.) and 2005 (Friesen & Pauli; GUESS method) to minimize the number of partitioning experiments required for countercurrent separation (CCS) solvent system selection. As semi-empirical approaches, both proposed that the K values defining the sweet spot of optimal CCS corresponded to a matching Rf value range from the silica gel TLC plate developed in the organic phase of a biphasic or a corresponding monophasic solvent system. Despite their simplicity, there has been an absence of theoretical support and a deficiency of reported experimental evidence. The present study explores the theory required to develop correlations between Rf and K. All theoretical models surmise that the optimal Rf value range should be centered at 0.5. In order to validate the feasibility of the concept of matching Rf and K values, 43 natural products and six solvent system families were investigated. Out of 62 correlations, 45 resulted in matched Rf and K values. Based on this study, practical guidelines for the TLC-based prediction strategy are provided. These approaches will equip CCS users with an updated understanding of how to apply the TLC-based solvent system selection strategy to accelerate a targeted selection of CCS conditions.

Conical coils counter-current chromatography for preparative isolation and purification of tanshinones from Salvia miltiorrhiza Bunge

Modern counter-current chromatography (CCC) originated from the helical coil planet centrifuge. Recently, spiral coils were found to possess higher separation efficiency in both the retention of stationary phase and solutes resolution than other CCC coils like the helical and toroidal coils used on type-J CCC and cross-axis CCC. In this work, we built a novel conical coil CCC for the preparative isolation and purification of tanshinones from Salvia miltiorrhiza Bunge. The conical coils were wound on three identical upright tapered holders in head-to-tail and left-handed direction and connected in series. Compared with helical and spiral coil CCC, conical coil CCC not only placed CCC column in a two-dimensional centrifugal field, but also provided a potential centrifugal force gradient both in axial and radial directions. The extra centrifugal gradient made mobile phase move faster and enabled CCC much higher retention of stationary phase and better resolution. As a result, higher efficiency has been obtained with the solvent system of hexane-ethyl acetate-methanol-water (HEMWat) with the volume ratio of 5:5:7:3 by using conical coil CCC apparatus. Four tanshinones, including cryptotanshinone (1), tanshinone I (2), 1,2-dihydrotanshinquinone (3) and tanshinone IIA (4), were well resolved from 500mg to 1g crude samples with high purity. Furthermore, the conical coil CCC can make a much higher solid phase retention, which makes it to be a powerful separation tool with high throughput. This is the first report about conical coil CCC for separation of tanshinones and it may also be an important advancement for natural products isolation.