Application of dual cyclodextrin systems in capillary electrophoresis enantioseparations

Simultaneous separation and determination of six furanocoumarins in Radix Angelicae dahuricae by CZE with dual CDs system

A novel, simple and efficient capillary electrophoresis method was developed to simultaneous determination of six furanocoumarins (psoralen, isopsoralen, imperatorin, isoimperatorin, phellopterin, and cnidilin). The separation buffer consisted of 30 mM boric acid, 12 mM sulfobutylether-β-cyclodextrin and 1.5 mM 2-hydroxypropyl-β-cyclodextrin (pH 7.8); the voltage was 20 kV, the temperature was 25 °C and the detection wavelength was at 246 nm with a diode array detector (DAD). Under the above conditions, the analytes could be separated with high resolution in less than 7 min. This method was used to simultaneously determine the content of psoralen, imperatorin, isoimperatorin and phellopterin in Angelica Dahurica Radix. And good linearities were obtained with correlation coefficients from 0.9992 to 0.9999. The limits of detection (LOD, S/N = 3) and the limits of quantitation (LOQ, S/N = 10) ranged from 0.6 to 3.0 μg/mL and from 2.1 to 9.9 μg/mL, respectively. The recoveries ranged between 98.8% and 101.8%. The results indicated the method can achieve baseline separation and quantitative analysis of furanocoumarins in Chinese herbal medicines and formulations.

Single isomer cyclodextrins as chiral selectors in capillary electrophoresis

Since decades, cyclodextrins are one of the most powerful selectors in chiral capillary electrophoresis for the enantioseparation of diverse organic compounds. This review concerns papers published over the last decade (from 2009 until nowadays), dealing with the capillary electrophoretic application of single isomer cyclodextrin derivatives in chiral separations. Following a brief overview of their synthetic approaches, the inventory of the neutral, negatively and positively charged (including both permanently ionic and pH-tunable ionizable substituents) and zwitterionic CD derivatives is presented, with insights to underlying structural aspects by NMR spectroscopy and molecular modeling. CE represents an ideal tool to study the weak, non-covalent supramolecular interactions. The published methods are reviewed in the light of enantioselectivity, enantiomer migration order and the fine-tuning of enantiodiscrimination by the substitution pattern of the single entity selector molecules, which is hardly possible for their randomly substituted counterparts. All the reviewed publications herein support that cyclodextrin-based chiral capillary electrophoresis seems to remain a popular choice in pharmaceutical and biomedical analysis.

Optimization of the enantioseparation of a diaryl-pyrazole sulfonamide derivative by capillary electrophoresis in a dual CD mode using experimental design

A CE method using dual cationic and neutral cyclodextrins (CD) was optimized for the enantiomeric separation of a compound presenting a diaryl sulfonamide group. Preliminary studies were made to select the optimal CDs and pH of the BGE. Two CDs (amino-β-CD and β-CD) were selected to separate the enantiomers in a 67 mM phosphate buffer at pH 7.4. However, the repeatability of the analyses obtained on bare-fused silica capillary was not acceptable owing to the adsorption of the amino-β-CD to the capillary. To prevent this, a dynamic coating of the capillary was used employing five layers of ionic-polymer (poly(diallyldimethylammonium) chloride (PDADMAC) and poly(sodium 4-styrenesulfonate). The efficiency of the coating was assessed by measuring the EOF stability. Repeatability of the injections was obtained when intermediate coating with PDADMAC was performed between each run. Secondly, this enantioseparation method was optimized using a central composite circumscribed design including three factors: amino-β-CD and β-CD concentrations and the percentage of methanol. Under the optimal conditions (i.e. 16.6 mM of amino-β-CD, 2.6 mM of β-CD, 0% MeOH in 67 mM phosphate buffer (pH 7.4) as BGE, cathodic injection 0.5 psi, 5 s, separation voltage 15 kV and a temperature of 15°C), complete enantioresolution of the analyte was obtained. It is worth mentioning that the design of experiments (DOE) protocol employed showed a significant interaction between CDs, highlighting the utility of DOE in method development. Finally, small variations in the ionic-polymer concentrations did not significantly influence the EOF, confirming the robustness of the coating method.

Field-amplified sample stacking β-cyclodextrin modified capillary electrophoresis for quantitative determination of diastereomeric saponins

Successful simultaneous diastereomeric separation and sensitive determination of two pairs of triterpenoidal saponins have been achieved by capillary electrophoresis (CE) using β-cyclodextrin (β-CD) as a stereoselective agent to cooperate with borate complexation. A usual technique for isolation and group separation of saponins was developed as an appropriate purification step prior to the determination of individual saponins by CE. Soyasaponin I ( S1: ), azukisaponin V ( S2: ), bersimoside I ( S3: ) and bersimoside II ( S4: ) could be well separated within 14 min in a fused-silica capillary (60 cm long to the detector with an additional 10 cm to the cathode; 75 µm i.d.). The background electrolyte was borate buffer (80 mM, pH 10), containing 24 mM β-CD. The separation voltage was 14 kV with a detection wavelength of 195 nm. The sample was electrokinetically injected using a voltage of 16 kV for 12 s. Methanol (70%) was used as the diluent for field-amplified sample stacking after hydrodynamic injection of short water plug (5 cm, 4 s). The method was partially validated for linearity, repeatability, reproducibility, limits of detection and limits of quantification. The correlation coefficients of the calibration curves were all >0.998, and the recoveries were from 98.23 to 96.21%.