Gellan Gum-Based Hydrogels for Osteochondral Repair

The current state of the art in gellan-based printing inks in tissue engineering

With the advancement of enhanced fabrication technologies, specifically 3D printing, it is now possible to build artificial tissue for personalized healing. However, inks developed from polymers often fail to meet expectations in terms of mechanical strength, scaffold integrity, and the stimulation of tissue formation. Developing new printable formulations as well as adapting existing printing methods is an essential aspect of contemporary biofabrication research. In order to push the boundaries of the printability window, various strategies have been developed employing gellan gum. This has resulted in major breakthroughs in the development of 3D hydrogels scaffolds that exhibit significant resemblance to genuine tissues and enables the fabrication of more complex systems. In light of the many uses of gellan gum, the purpose of this paper is to provide a synopsis of the printable ink designs drawing attention to the various compositions and fabrication approaches that may be used for tuning the properties of 3D printed hydrogels for tissue engineering applications. The purpose of this article is to outline the development of gellan-based 3D printing inks and to encourage research by highlighting the possible applications of gellan gum.

Repairing Annulus Fibrosus Fissures Using Methacrylated Gellan Gum Combined with Novel Silk

Intervertebral disc (IVD) herniation often causes severe pain and is frequently associated with the degeneration of the IVD. As the IVD degenerates, more fissures with increasing size appear within the outer region of the IVD, the annulus fibrosus (AF), favoring the initiation and progression of IVD herniation. For this reason, we propose an AF repair approach based on methacrylated gellan gum (GG-MA) and silk fibroin. Therefore, coccygeal bovine IVDs were injured using a biopsy puncher (⌀ 2 mm) and then repaired with 2% GG-MA as a filler material and sealed with an embroidered silk yarn fabric. Then, the IVDs were cultured for 14 days either without any load, static loading, or complex dynamic loading. After 14 days of culture, no significant differences were found between the damaged and repaired IVDs, except for a significant decrease in the IVDs' relative height under dynamic loading. Based on our findings combined with the current literature that focuses on ex vivo AF repair approaches, we conclude that it is likely that the repair approach did not fail but rather insufficient harm was done to the IVD.

A novel method for making cell blocks with higher cellular yield

INTRODUCTION

Cytopathology is an important part of pathology that is used to diagnose disease on the cellular level. The application of the cell block (CB) technique plays a vital role in cytological diagnosis, as blocks and slides can be further used for special stains, immunohistochemistry (IHC), and molecular pathological analysis. Several methods for making CBs have been reported, but their procedures and cellular yield are still deemed unsatisfactory. In this article, we used gellan gum (GG) as an adjuvant for CBs, which resulted in higher cellular yield with simpler procedures.

METHODS

CBs were prepared by using GG, copper sulfate, plasma/thrombin, or pregelatinized starch methods. The procedures of each of these four methods were then compared. CB sections were stained with hematoxylin and eosin (H&E), and the background and morphological features seen by H&E staining were compared. A preliminary IHC and fluorescence in situ hybridization (FISH) study was performed using cytology specimens from eleven and five cases, respectively. The expression of immunocomplex by IHC and the molecular signals detected by FISH were compared in CB sections made by the four methods and a section derived from the biopsy specimen block from the same patient. Feulgen staining, Alcian blue staining, and Masson trichrome staining were performed on the CB sections from 3 cases of pleural fluid. The cellular yield of CB sections from 83 cases according to the four methods was compared using NDP analysis software.

RESULTS

The results demonstrated that sections derived from CBs made with GG had a clear background and good morphological features by H&E staining. The expression of immunocomplex by IHC and the molecular signals of FISH detection in the sections from CBs made by GG were accurately located just as those in biopsy sections from the same patient. The DNA, acidic mucus, and fibrin could be clearly identified through special stains in the CB sections. The procedures involved in the GG method were easily controllable and the coagulated gel increased the ease by which the CB was embedded and sectioned. Specifically, sections from CBs made by the GG method contained higher cellular yield because cells could be concentrated on the bottom of the gel after centrifugation.

CONCLUSION

This novel method for making CBs is a practical, simple method that can result in higher cellular yield. This method is therefore worth promoting in clinical applications.

Osteochondral regeneration in rabbit using xenograft decellularized ECM in combination with different biological products; platelet-rich fibrin, amniotic membrane extract, and mesenchymal stromal cells

This study aimed to investigate the regenerative effect of decellularized osteochondral ECM xenograft in combination with various biological products in an osteochondral (OC) defect. OC tissue from the sheep femur were obtained and decellularized. The decellularized ECM (dECM) was combined with either platelet-rich fibrin (PRF), amniotic membrane extract (AME), or rabbit bone marrow-derived mesenchymal stromal cells (rBMSCs). The hybrid dECM-biological products were then utilized for the treatment of rabbit OC critical size defects. The regenerative potential of different groups was compared using; MRI, macroscopic assessment, histopathology, and histomorphometry. All characterizations analysis verified successful decellularization. Three months post-surgery, macroscopic findings indicated that dECM was better compared to controls. Also, dECM in combination with AME, PRF, and rBMSCs showed enhanced OC regeneration compared to only dECM (AME: +100%, PRF: +61%, rBMSCs: +28%). In particular, the dECM+AME group results in the best integration of new cartilage into surrounding cartilage tissue. The histomorphometric evaluations demonstrated enhancement in new cartilage formation and bone tissue (86.5 ± 5.9% and 90 ± 7.7%, respectively) for the dECM+AME group compared to other groups. Furthermore, histological results for the dECM+AME elucidated a mature hyaline cartilage tissue that covered the new and symmetrically formed subchondral bone, exhibiting a significantly higher regenerative effect compared to all other treated groups. This finding was also confirmed with MRI images. The current study revealed that in addition to the benefits of dECM alone, its combination with AME indicated to have a superior regenerative effect on OC regeneration. Overall, dECM+AME may be considered a suitable construct for treating knee OC injuries.

Addition of High Acyl Gellan Gum to Low Acyl Gellan Gum Enables the Blends 3D Bioprintable

Long-term stability of gellan gum (GG) at physiological conditions is expected, as very low concentration of divalent ions are required for crosslinking, as compared to alginate—which is extensively used for tissue engineering (TE) applications. Hence, GG is proposed as an ideal candidate to substitute alginate for TE. Deacylated (low acyl; LA) GG forms brittle gels, thus only low concentrations were used for cell encapsulation, whereas acylated (high acyl; HA) GG forms weak/soft gels. 3D bioprinting using pure LAGG or HAGG is not possible owing to their rheological properties. Here, we report development and characterization of bioprintable blends of LAGG and HAGG. Increase in HAGG in the blends improved shear recovery and shape fidelity of printed scaffolds. Low volumetric swelling observed in cell culture conditions over 14 days indicates stability. Volumetric scaffolds were successfully printed and their mechanical properties were determined by uniaxial compressive testing. Mesenchymal stem cells bioprinted in blends of 3% LAGG and 3% HAGG survived the printing process showing >80% viability; a gradual decrease in cell numbers was observed over 21 days of culture. However, exploiting intrinsic advantages of 3D bioprinting, LAGG/HAGG blends open up numerous possibilities to improve and/or tailor various aspects required for TE.

Bioengineered Nanoparticles Loaded-Hydrogels to Target TNF Alpha in Inflammatory Diseases

Rheumatoid Arthritis (RA) is an incurable autoimmune disease that promotes the chronic impairment of patients’ mobility. For this reason, it is vital to develop therapies that target early inflammatory symptoms and act before permanent articular damage. The present study offers two novel therapies based in advanced drug delivery systems for RA treatment: encapsulated chondroitin sulfate modified poly(amidoamine) dendrimer nanoparticles (NPs) covalently bonded to monoclonal anti-TNF α antibody in both Tyramine-Gellan Gum and Tyramine-Gellan Gum/Silk Fibroin hydrogels. Using pro-inflammatory THP-1 (i.e., human monocytic cell line), the therapy was tested in an inflammation in vitro model under both static and dynamic conditions. Firstly, we demonstrated effective NP-antibody functionalization and TNF-α capture. Upon encapsulation, the NPs were released steadily over 21 days. Moreover, in static conditions, the approaches presented good anti-inflammatory activity over time, enabling the retainment of a high percentage of TNF α. To mimic the physiological conditions of the human body, the hydrogels were evaluated in a dual-chamber bioreactor. Dynamic in vitro studies showed absent cytotoxicity in THP-1 cells and a significant reduction of TNF-α in suspension over 14 days for both hydrogels. Thus, the developed approach showed potential for use as personalized medicine to obtain better therapeutic outcomes and decreased adverse effects.

Graphene Oxide-Doped Gellan Gum-PEGDA Bilayered Hydrogel Mimicking the Mechanical and Lubrication Properties of Articular Cartilage

Articular cartilage (AC) is a specialized connective tissue able to provide a low-friction gliding surface supporting shock-absorption, reducing stresses, and guaranteeing wear-resistance thanks to its structure and mechanical and lubrication properties. Being an avascular tissue, AC has a limited ability to heal defects. Nowadays, conventional strategies show several limitations, which results in ineffective restoration of chondral defects. Several tissue engineering approaches have been proposed to restore the AC's native properties without reproducing its mechanical and lubrication properties yet. This work reports the fabrication of a bilayered structure made of gellan gum (GG) and poly (ethylene glycol) diacrylate (PEGDA), able to mimic the mechanical and lubrication features of both AC superficial and deep zones. Through appropriate combinations of GG and PEGDA, cartilage Young's modulus is effectively mimicked for both zones. Graphene oxide is used as a dopant agent for the superficial hydrogel layer, demonstrating a lower friction than the nondoped counterpart. The bilayered hydrogel's antiwear properties are confirmed by using a knee simulator, following ISO 14243. Finally, in vitro tests with human chondrocytes confirm the absence of cytotoxicity effects. The results shown in this paper open the way to a multilayered synthetic injectable or surgically implantable filler for restoring AC defects.

Polyhedral Oligomeric Silsesquioxane /Platelets Rich Plasma/Gelrite-Based Hydrogel Scaffold for Bone Tissue Engineering

BACKGROUND

Polyhedral oligomeric silsesquioxane (POSS) is a monomer with silicon structure and an internal nanometric cage.

OBJECTIVE

The purpose of this study was to provide an injectable hydrogel that could be easily located in open or closed bone fractures and injuries, and also to reduce the possible risks of infections caused by bone graft either as an allograft or an autograft.

METHODS

Various formulations of temperature sensitive hydrogels containing hydroxyapatite, Gelrite, POSS and platelets rich plasma (PRP), such as the co-gelling agent and cell growth enhancer, were prepared. The hydrogels were characterized for their injectability, gelation time, phase transition temperature and viscosity. Other physical properties of the optimized formulation including compressive stress, compressive strain and Young's modulus as mechanical properties, as well as storage and loss modulus, swelling ratio, biodegradation behavior and cell toxicity as rheometrical parameters were studied on human osteoblast MG-63 cells. Alizarin red tests were conducted to study the qualitative and quantitative osteogenic capability of the designed scaffold, and the cell adhesion to the scaffold was visualized by scanning electron microscopy.

RESULTS

The results demonstrated that the hydrogel scaffold mechanical force and injectability were 3.34±0.44 Mpa and 12.57 N, respectively. Moreover, the scaffold showed higher calcium granules production in alizarin red staining compared to the control group. The proliferation of the cells in G4.5H1P0.03PRP10 formulation was significantly higher than in other formulations (p<0.05).

CONCLUSION

The optimized Gelrite/Hydroxyapatite/POSS/PRP hydrogel scaffold has useful impacts on osteoblasts activity, and may be beneficial for local drug delivery in complications including a break or bone loss.

Calcitonin-loaded octamaleimic acid-silsesquioxane nanoparticles in hydrogel scaffold support osteoinductivity in bone regeneration

Novel osteoinductive scaffolds fabricated using the benefits of tissue engineering techniques accompanied by utilizing drugs can accelerate bone regeneration. The purpose of this study was to load salmon calcitonin (sCT) in octamaleimic acid-silsesquioxane (OMA-POSS) nanoparticles and enrich the hydrogel scaffold based on hydroxyapatite, Gelrite® and platelet-rich plasma (PRP) for use in bone tissue engineering. The loading efficiency, release percentage, particle size and zeta potential of the nanoparticles were evaluated. The proliferation of seeded MG-63 osteoblast cells on the designed scaffold, its cytotoxicity and osteo-conductivity were studied by alkaline phosphatase measurement and Alizarin red staining. The expression of cellular osteogenic markers such as collagen 1 (COL1A1), osteocalcin (BGLAP) and osteopontin (SPP1) was examined using reverse transcription polymerase chain reaction. The results revealed that the particle size of the nanoparticles varied between 94.2 and 199.2 nm and their negative surface charge increased after drug conjugation. The osteoblast cell proliferation and calcium granule production in the optimum formulation were significantly higher in comparison with the control group (p < 0.05). Osteogenic markers increased significantly after a specific number of days of cell culture compared to the control group (p < 0.05). The results also showed the potential of the designed scaffold in bone tissue engineering.

Scaffold-Mediated Gene Delivery for Osteochondral Repair

Osteochondral defects involve both the articular cartilage and the underlying subchondral bone. If left untreated, they may lead to osteoarthritis. Advanced biomaterial-guided delivery of gene vectors has recently emerged as an attractive therapeutic concept for osteochondral repair. The goal of this review is to provide an overview of the variety of biomaterials employed as nonviral or viral gene carriers for osteochondral repair approaches both in vitro and in vivo, including hydrogels, solid scaffolds, and hybrid materials. The data show that a site-specific delivery of therapeutic gene vectors in the context of acellular or cellular strategies allows for a spatial and temporal control of osteochondral neotissue composition in vitro. In vivo, implantation of acellular hydrogels loaded with nonviral or viral vectors has been reported to significantly improve osteochondral repair in translational defect models. These advances support the concept of scaffold-mediated gene delivery for osteochondral repair.

New gellan gum-graft-poly(d,l-lactide-co-glycolide) copolymers as promising bioinks: Synthesis and characterization

This research focused on the aim of tackling the urgent demand of printable biomaterials, hence we synthetized and characterized three gellan gum-graft-poly(d,l-lactide-co-glycolide) copolymers (GGm-PLGA a, b and c) which differed in the graft substitution degree. We investigated the effect of the polyester chain grafted onto hydrophilic backbone of gellan gum in terms of physicochemical properties and the ability of the system to print 3D cell laden constructs. In particular, we evaluated thermo-rheological, ionotropic crosslinking, shear thinning, swelling and stability properties of these copolymers and their derived biomaterials and findings related to the degree of functionalization. Moreover, the optimization of the 3D process parameters and the effect of different water/DPBS mixtures was investigated, demonstrating the feasibility of the system to print 3D constructs. Finally, biological tests revealed that fibroblasts and chondrocytes remained viable after printing and over a culture period of seven days into scaffolds.

Characterization and Potential of a Bilayered Hydrogel of Gellan Gum and Demineralized Bone Particles for Osteochondral Tissue Engineering

Osteochondral (OC) tissue engineering (TE) is a promising strategy to regenerate acute or degenerative chondral and OC lesions. However, advancing a proper model for OC TE is still under way. Herein, a bilayer hydrogel (BH) based on gellan gum (GG) hydrogel and demineralized bone particles (DBPs) is suggested as a new model. The BH composite can be fabricated easily with a cell-friendly biomaterial and cross-linker. The BH composite was characterized by a morphological method and physicochemical aspect. The mechanical and rheological characters were further confirmed to verify its applicability in OC TE. The thermodynamic property of the composite was determined to analyze thermal stability and interaction among matrices. The bioactivity of the material was studied by treating simulated body fluid (SBF) solution for 28 days to examine the formation of crystalline structure in the BH construct. In vitro studies were carried out to study the viability and biochemical characters of the developed biomaterial. An in vivo study was performed to analyze the biocompatibility of the material and regeneration of the injured OC region implanted with BH composites. The data displayed stable physicochemical properties and mechanical characters when the DBPs were incorporated with a proper amount. The bioactivity of the DBP-loaded hydrogels displayed a high amount of apatite formation. The cytotoxicity of the fabricated material was low, which allows application in vitro and in vivo. The biochemical studies displayed a high level of alkaline phosphatase (ALP) activity and gene expression, which shows promising application of DBP-loaded GG in the bone layer of the BH model. The long-term in vivo study displayed excellent biocompatibility and great potential in the OC defected region. Overall, these results suggest the significance of combined and innovative approaches to improve the therapeutic strategies for OC regeneration, and the BH model suggested in this study can be a promising biomaterial model for OC TE.

Application of Gellan Gum-Based Scaffold for Regenerative Medicine

Gellan gum (GG) is a linear microbial exopolysaccharide which is derived naturally by the fermentation process of Pseudomonas elodea. Application of GG in tissue engineering and regeneration medicine (TERM) is already over 10 years and has shown great potential. Although this biomaterial has many advantages such as biocompatibility, biodegradability, nontoxic in nature, and physical stability in the presence of cations, a variety of modification methods have been suggested due to some disadvantages such as mechanical properties, high gelation temperature, and lack of attachment sites. In this review, the application of GG-based scaffold for tissue engineering and approaches to improve GG properties are discussed. Furthermore, a recent trend and future perspective of GG-based scaffold are highlighted.