Selenium Nanoparticles: Biomedical Applications

Advances in selenium from materials to applications

Over the past few decades, single-element semiconductors have received a great deal of attention due to their unique light-sensitive and heat-sensitive properties, which are of great application and research significance. As one promising material, selenium, being a typical semiconductor, has attracted significant attention from researchers due to its unique properties including high optical conductivity, anisotropic, thermal conductivity, and so on. To promote the application of selenium nanomaterials in various fields, numerous studies over the past few decades have successfully synthesized selenium nanomaterials in various morphologies using a wide range of physical and chemical methods. In this paper, we review and summarise the different methods of synthesis of various morphologies of selenium nanomaterials and discuss the applications of different nanostructures of selenium nanomaterials in optoelectronic devices, chemical sensors, and biomedical applications. Finally, we discuss possible challenges for selenium nanodevices and provide an outlook on the future applications of selenium nanomaterials.

Toxicological effects of selenium nanoparticles in laboratory animals: A review

This paper provides a comprehensive summary of the main toxicological studies conducted on selenium nanoparticles (NPs) using laboratory animals, up until February 28, 2023. A literature search revealed 17 articles describing experimental studies conducted on warm-blooded animals. Despite some uncertainties, in vivo studies have demonstrated that selenium NPs have an adverse effect on laboratory animals, as evidenced by several indicators of general toxic action. These effects include reductions of body mass, changes in hepatotoxicity indices (increased enzyme activity and accumulation of selenium in the liver), and the possibility of impairment of fatty acid, protein, lipid, and carbohydrate metabolisms. However, no specific toxic action attributable solely to selenium has been identified. The LOAEL and NOAEL values are contradictory. The NOAEL was 0.22 mg/kg body weight per day for males and 0.33 mg/kg body weight per day for females, while the LOAEL was assumed to be a dose of 0.05 mg/kg of nanoselenium. This LOAEL value is much higher for rats than for humans. The relationship between the adverse effects of selenium NPs and exposure dose is controversial and presents a wide typological diversity. Further research is needed to clarify the absorption, metabolism, and long-term toxicity of selenium NPs, which is critical to improving the risk assessment of these compounds.

Antifungal activity of green synthesized selenium nanoparticles and their effect on physiological, biochemical, and antioxidant defense system of mango under mango malformation disease

Plant extract-based green synthesis of nanoparticles is an emerging class of nanotechnology that has revolutionized the entire field of biological sciences. Green synthesized nanoparticles are used as super-growth promoters and antifungal agents. In this study, selenium nanoparticles (SeNPs) were synthesized using Melia azedarach leaves extract as the main reducing and stabilizing agent and characterized by UV-visible spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), energy-dispersive X-ray (EDX), and fourier transform infrared spectrometer (FTIR). The green synthesized SeNPs were exogenously applied on Mangifera indica infected with mango malformation disease. The SeNPs at a concentration of 30 μg/mL were found to be the best concentration which enhanced the physiological (chlorophyll and membrane stability index), and biochemical (proline and soluble sugar) parameters. The antioxidant defense system was also explored, and it was reported that green synthesized SeNPs significantly reduced the biotic stress by enhancing enzymatic and non-enzymatic activities. In vitro antifungal activity of SeNPs reported that 300 μg/mL concentration inhibited the Fusarium mangiferae the most. This study is considered the first biocompatible approach to evaluate the potential of green synthesized SeNPs to improve the health of mango malformation-infected plants and effective management strategy to inhibit the growth of F. mangifera.

Conductive and Semiconductive Nanocomposite-Based Hydrogels for Cardiac Tissue Engineering

Cardiovascular disease is the leading cause of death worldwide and the most common cause is myocardial infarction. Therefore, appropriate approaches should be used to repair damaged heart tissue. Recently, cardiac tissue engineering approaches have been extensively studied. Since the creation of the nature of cardiovascular tissue engineering, many advances have been made in cellular and scaffolding technologies. Due to the hydrated and porous structures of the hydrogel, they are used as a support matrix to deliver cells to the infarct tissue. In heart tissue regeneration, bioactive and biodegradable hydrogels are required by simulating native tissue microenvironments to support myocardial wall stress in addition to preserving cells. Recently, the use of nanostructured hydrogels has increased the use of nanocomposite hydrogels and has revolutionized the field of cardiac tissue engineering. Therefore, to overcome the limitation of the use of hydrogels due to their mechanical fragility, various nanoparticles of polymers, metal, and carbon are used in tissue engineering and create a new opportunity to provide hydrogels with excellent properties. Here, the types of synthetic and natural polymer hydrogels, nanocarbon-based hydrogels, and other nanoparticle-based materials used for cardiac tissue engineering with emphasis on conductive nanostructured hydrogels are briefly introduced.

Utilization of Olive Pomace in Green Synthesis of Selenium Nanoparticles: Physico-Chemical Characterization, Bioaccessibility and Biocompatibility

Olive pomace extract (OPE) was investigated as a potential surface modifier for the development of the green synthesis process of selenium nanoparticles (SeNPs). In order to evaluate them as potential nutraceuticals, the obtained nanosystems were characterized in terms of size distribution, shape, zeta potential, stability in different media, gastrointestinal bioaccessibility and biocompatibility. Systems with a unimodal size distribution of spherical particles were obtained, with average diameters ranging from 53.3 nm to 181.7 nm, depending on the type of coating agent used and the presence of OPE in the reaction mixture. The nanosystems were significantly affected by the gastrointestinal conditions. Bioaccessibility ranged from 33.57% to 56.93% and it was significantly increased by functionalization of with OPE. Biocompatibility was investigated in the HepG2 and Caco2 cell models, proving that they had significantly lower toxicity in comparison to sodium selenite. Significant differences were observed in cellular responses depending on the type of cells used, indicating differences in the mechanisms of toxicity induced by SeNPs. The obtained results provide new insight into the possibilities for the utilization of valuable food-waste extracts in the sustainable development of nanonutraceuticals.

The Role of Selenium Nanoparticles in Agriculture and Food Technology

Selenium (Se) is an essential micronutrient for diverse organisms such as mammals, bacteria, some insects and nematodes, archaea, and algae, as it is involved in a large number of physiological and metabolic processes and is part of approximately 25 selenoproteins in mammals. In plants, Se has no essential metabolic role, high concentrations of inorganic Se can lead to the formation of Se-amino acids, and its incorporation into selenoproteins can generate toxicity. Conversely, low doses of Se can trigger a variety of beneficial effects as an antioxidant, antimicrobial, or stress-modulating agent without being an essential element. Therefore, Se can generate toxicity depending on the dose and the chemical form in which it is supplied. Selenium nanoparticles (SeNPs) have emerged as an approach to reduce this negative effect and improve its biological properties. In turn, SeNPs have a wide range of potential advantages, making them an alternative for areas such as agriculture and food technology. This review focuses on the use of SeNPs and their different applications as antimicrobial agents, growth promoters, crop biofortification, and nutraceuticals in agriculture. In addition, the utilization of SeNPs in the generation of packaging with antioxidant and antimicrobial traits and Se enrichment of animal source foods for human consumption as part of food technology is addressed. Additionally, possible action mechanisms and potential adverse effects are discussed. The concentration, size, and synthesis method of SeNPs are determining factors of their biological properties.

Selenium Nanomaterials to Combat Antimicrobial Resistance

The rise of antimicrobial resistance to antibiotics (AMR) as a healthcare crisis has led to a tremendous social and economic impact, whose damage poses a significant threat to future generations. Current treatments either are less effective or result in further acquired resistance. At the same time, several new antimicrobial discovery approaches are expensive, slow, and relatively poorly equipped for translation into the clinical world. Therefore, the use of nanomaterials is presented as a suitable solution. In particular, this review discusses selenium nanoparticles (SeNPs) as one of the most promising therapeutic agents based in the nanoscale to treat infections effectively. This work summarizes the latest advances in the synthesis of SeNPs and their progress as antimicrobial agents using traditional and biogenic approaches. While physiochemical methods produce consistent nanostructures, along with shortened processing procedures and potential for functionalization of designs, green or biogenic synthesis represents a quick, inexpensive, efficient, and eco-friendly approach with more promise for tunability and versatility. In the end, the clinical translation of SeNPs faces various obstacles, including uncertain in vivo safety profiles and mechanisms of action and unclear regulatory frameworks. Nonetheless, the promise possessed by these metalloid nanostructures, along with other nanoparticles in treating bacterial infections and slowing down the AMR crisis, are worth exploring.

Algal biomass as a source for novel oral nano-antimicrobial agent

In the present study, sulphated polysaccharide Ulvan from Ulva lactuca was used for the synthesis of biogenic Selenium Nanoparticles (SeNPs) conjugate and Mouth rinse was prepared using this conjugate. The synthesis of nanoparticles was confirmed by UV–Visible spectrophotometry and characterized using Fourier transform infrared spectroscopy (FTIR), transmission electron microscope (TEM) and X-ray diffraction (XRD). TEM showed that the average size of the nanoparticle was 85 nm and spherical in shape. Furthermore, nanoparticle conjugates were evaluated for cell viability using MTT assay 3T3-L1 cell line and at 30 µl/ml showed 34% cell viability. The antimicrobial activity of SeNPs mouth rinse was tested against oral pathogens such as Streptococcus mutans, Staphylococcus aureus, Lactobacillus, and Candida albicans and it was effective against all tested microorganism at the concentration of 100 µl/ml. The present study has shown that Ulvan from algal biomass can be a safe and effective source for the development of oral nano-antimicrobial agents.

Antifungal activities of silver and selenium nanoparticles stabilized with different surface coating agents

BACKGROUND

Extensive and growing use of different chemical pesticides that affect both the environment and human health raises a need for new and more suitable methods to deal with plant pathogens. Nanotechnology has enabled the use of materials at the nanoscale with exceptional functionality in different economic domains including agricultural production. This study aimed to evaluate antifungal potential of selenium nanoparticles (SeNPs) and silver nanoparticles (AgNPs) stabilized with different surface coatings and characterized by different surface charge on plant pathogenic fungi Macrophomina phaseolina, Sclerotinia sclerotiorum and Diaporthe longicolla.

RESULTS

AgNPs were coated with three different stabilizing agents: mono citrate (MC-AgNPs), cetyltrimethyl ammonium bromide (CTAB-AgNPs) and polyvinylpyrrolidon (PVP-AgNPs). SeNPs were coated with poly-l-lysine (PLL-SeNPs), polyacrylic acid (PAA-SeNPs), and polyvinylpyrrolidon (PVP-SeNPs). Seven different concentrations (0.1, 0.5, 1, 5, 10, 50 and 100 mg L^-1 ) of nanoparticles were applied. All AgNPs and SeNPs significantly inhibited the growth of the tested fungi. Among the tested NPs, PVP-AgNPs showed the best inhibitory effect on the tested plant pathogenic fungi, especially against S. sclerotiorum. The similar inhibition of the sclerotia formation was observed for S. sclerotiorum treated with PLL-SeNPs.

CONCLUSION

Obtained results provides new insights on fungicide effect of AgNPs and SeNPs stabilized with different coating agents on different plant pathogens. Further work should focus on detailed risk/benefit ratio assessment of using SeNPs or AgNPs in agriculture taking into account whole agroecosystem. © 2020 Society of Chemical Industry.