Growth and cellular characteristics of multicell spheroids

Bioprinting Using Organ Building Blocks: Spheroids, Organoids, and Assembloids

Three-dimensional (3D) bioprinting, a promising advancement in tissue engineering technology, involves the robotic, layer-by-layer additive biofabrication of functional 3D tissue and organ constructs. This process utilizes biomaterials, typically hydrogels and living cells, following digital models. Traditional tissue engineering uses a classic triad of living cells, scaffolds, and physicochemical signals in bioreactors. A scaffold is a temporary, often biodegradable, support structure. Tissue engineering primarily falls into two categories: (i) scaffold based and (ii) scaffold free. The latter, scaffold-free 3D bioprinting, is gaining increasing popularity. Organ building blocks (OBB), capable of self-assembly and self-organization, such as tissue spheroids, organoids, and assembloids, have begun to be utilized in scaffold-free bioprinting. This article discusses the expanding range of OBB, presents the rapidly evolving collection of bioprinting and bioassembly methods using these OBB, and finally, outlines the advantages, challenges, and future perspectives of using OBB in organ printing.

Evaluating the Pharmacokinetics and Pharmacodynamics of Chemotherapeutics within a Spatial SILAC-Labeled Spheroid Model System

Tumors have considerable cellular heterogeneity that is impossible to explore with simple cell cultures. Spheroid cultures contain pathophysiological and chemical gradients similar to in vivo tumors and show complex responses to therapeutics, similar to a tumor. Using pulsed isotopic labels, we demonstrate the pronounced differential response of the proteome to the drug Regorafenib, a multikinase inhibitor, in HCT 116 spheroids. Regorafenib treatment of outer spheroids inhibits proteins involved in critical pathways such as mTOR signaling, extracellular signal-regulated kinase (ERK)/mitogen-activated protein kinase (MAPK) signaling, and colorectal cancer metastasis signaling, resulting in decreased proliferation and cellular apoptosis. By contrast, analysis of the treated core cells shows upregulation of MAPK1 and KRAS, possibly implicating drug resistance within these late apoptotic cells. Thus, pulsed isotopic labeling enables evaluation of the distinct proteomic responses for cells residing in the different chemical microenvironments of the spheroid. This platform promises great utility in assisting researchers' predictions of pharmacodynamic therapeutic responses within complex tumors.

DNA-PK inhibition extends the therapeutic effects of Top2 poisoning to non-proliferating cells, increasing activity at a cost

Type II topoisomerase (Top2) poisoning therapy is used to treat a broad range of cancers via induction of double strand breaks (DSBs) in cells undergoing replication and transcription. Preventing the repair of DSBs via inhibition of DNA-PK, an inhibitor of non-homologous end-joining (NHEJ), increases cell kill with Top2 poisons and has led to the initiation of several clinical trials. To elucidate the cellular mechanisms leading to synergistic activity of dual DNA-PK/Top2 inhibition we looked at their effects in cycling versus non-cycling cells, in 3D spheroids and in xenograft models. Combined DNA-PK/Top2 inhibition was found to not only increase the cell kill in proliferating cells, the cell population that is typically most vulnerable to Top2 poisoning, but also in non-proliferative but transcriptionally active cells. This effect was observed in both cancer and normal tissue models, killing more cells than high concentrations of etoposide alone. The combination treatment delayed tumor growth in mice compared to Top2 poisoning alone, but also led to increased toxicity. These findings demonstrate sensitization of Top2β-expressing, non-cycling cells to Top2 poisoning by DNA-PK inhibition. Expansion of the target cell population of Top2 poison treatment to include non-proliferating cells via combination with DNA damage repair inhibitors has implications for efficacy and toxicity of these combinations, including for inhibitors of DNA-PK currently in clinical trial.

In vitro models to study natural killer cell dynamics in the tumor microenvironment

Immunotherapy is revolutionizing cancer therapy. The rapid development of new immunotherapeutic strategies to treat solid tumors is posing new challenges for preclinical research, demanding novel in vitro methods to test treatments. Such methods should meet specific requirements, such as enabling the evaluation of immune cell responses like cytotoxicity or cytokine release, and infiltration into the tumor microenvironment using cancer models representative of the original disease. They should allow high-throughput and high-content analysis, to evaluate the efficacy of treatments and understand immune-evasion processes to facilitate development of new therapeutic targets. Ideally, they should be suitable for personalized immunotherapy testing, providing information for patient stratification. Consequently, the application of in vitro 3-dimensional (3D) cell culture models, such as tumor spheroids and organoids, is rapidly expanding in the immunotherapeutic field, coupled with the development of novel imaging-based techniques and -omic analysis. In this paper, we review the recent advances in the development of in vitro 3D platforms applied to natural killer (NK) cell-based cancer immunotherapy studies, highlighting the benefits and limitations of the current methods, and discuss new concepts and future directions of the field.

State-dependent evolutionary models reveal modes of solid tumour growth

Spatial properties of tumour growth have profound implications for cancer progression, therapeutic resistance and metastasis. Yet, how spatial position governs tumour cell division remains difficult to evaluate in clinical tumours. Here, we demonstrate that faster division on the tumour periphery leaves characteristic genetic patterns, which become evident when a phylogenetic tree is reconstructed from spatially sampled cells. Namely, rapidly dividing peripheral lineages branch more extensively and acquire more mutations than slower-dividing centre lineages. We develop a Bayesian state-dependent evolutionary phylodynamic model (SDevo) that quantifies these patterns to infer the differential division rates between peripheral and central cells. We demonstrate that this approach accurately infers spatially varying birth rates of simulated tumours across a range of growth conditions and sampling strategies. We then show that SDevo outperforms state-of-the-art, non-cancer multi-state phylodynamic methods that ignore differential sequence evolution. Finally, we apply SDevo to single-time-point, multi-region sequencing data from clinical hepatocellular carcinomas and find evidence of a three- to six-times-higher division rate on the tumour edge. With the increasing availability of high-resolution, multi-region sequencing, we anticipate that SDevo will be useful in interrogating spatial growth restrictions and could be extended to model non-spatial factors that influence tumour progression.

Organoids revealed: morphological analysis of the profound next generation in-vitro model with artificial intelligence

In modern terminology, "organoids" refer to cells that grow in a specific three-dimensional (3D) environment in vitro, sharing similar structures with their source organs or tissues. Observing the morphology or growth characteristics of organoids through a microscope is a commonly used method of organoid analysis. However, it is difficult, time-consuming, and inaccurate to screen and analyze organoids only manually, a problem which cannot be easily solved with traditional technology. Artificial intelligence (AI) technology has proven to be effective in many biological and medical research fields, especially in the analysis of single-cell or hematoxylin/eosin stained tissue slices. When used to analyze organoids, AI should also provide more efficient, quantitative, accurate, and fast solutions. In this review, we will first briefly outline the application areas of organoids and then discuss the shortcomings of traditional organoid measurement and analysis methods. Secondly, we will summarize the development from machine learning to deep learning and the advantages of the latter, and then describe how to utilize a convolutional neural network to solve the challenges in organoid observation and analysis. Finally, we will discuss the limitations of current AI used in organoid research, as well as opportunities and future research directions.

Graphic abstract

Anticancer bioactivity of zerumbone on pediatric rhabdomyosarcoma cells

PURPOSE

Natural products are generally regarded as safe and have been shown to mediate anticancer activities against a variety of cell types. Zerumbone is a natural cyclic sesquiterpene derived from the rhizome of Zingiber zerumbet, which has attracted extensive attention in the recent decade for anticancer activities. The present study investigates the in vitro effect of zerumbone on rhabdomyosarcoma cells.

METHODS

Two rhabdomyosarcoma cell lines (RD and RH30) were used as the model system. The growth inhibition of zerumbone was measured by MTT-assay, apoptosis via flow cytometry, gene expression by real-time PCR, the migration by transwell assay, and intracellular signaling by Western blotting.

RESULTS

Zerumbone shows anticancer effects on RD and RH30 cells in a dose-dependent manner via cell growth inhibition and induction of apoptosis. Exposure of RD and RH30 cells on zerumbone also resulted in a decrease of migration and downregulation of the hedgehog pathway.

CONCLUSIONS

Taken together, our study provided the first evidence that zerumbone imparted strong inhibitory and apoptotic effects on pediatric rhabdomyosarcoma cell lines and merit further investigation as a promising candidate for the anticancer therapy.

MS imaging of multicellular tumor spheroids and organoids as an emerging tool for personalized medicine and drug discovery

MS imaging (MSI) is a powerful tool in drug discovery because of its ability to interrogate a wide range of endogenous and exogenous molecules in a broad variety of samples. The impressive versatility of the approach, where almost any ionizable biomolecule can be analyzed, including peptides, proteins, lipids, carbohydrates, and nucleic acids, has been applied to numerous types of complex biological samples. While originally demonstrated with harvested organs from animal models and biopsies from humans, these models are time consuming and expensive, which makes it necessary to extend the approach to 3D cell culture systems. These systems, which include spheroid models, prepared from immortalized cell lines, and organoid cultures, grown from patient biopsies, can provide insight on the intersection of molecular information on a spatial scale. In particular, the investigation of drug compounds, their metabolism, and the subsequent distribution of their metabolites in 3D cell culture systems by MSI has been a promising area of study. This review summarizes the different ionization methods, sample preparation steps, and data analysis methods of MSI and focuses on several of the latest applications of MALDI-MSI for drug studies in spheroids and organoids. Finally, the application of this approach in patient-derived organoids to evaluate personalized medicine options is discussed.

Biological properties and development of hypoxia in a breast cancer 3D model generated by hanging drop technique

Hanging drop represents a simple approach designed for the generation of 3D models that have potential to be used for the study of solid tumors characteristics. The aim of the study was to develop and characterize the breast cancer 3D cellular models obtained through hanging drop technique using MDA-MB-231 cells. The biological characteristics such as: morphology, cellular viability, proliferation capacity and hypoxia, were monitored for a six-day time period. The morphological evaluation indicated that the 3D models presented the aspect of compact (seeding density of 2500 and 5000 cells/drop) and loose (seeding density of 8000 cells/drop) aggregates, with a decrease in diameter and an increase of their circularity. The cellular viability and proliferation capacity decreased in time and the level of lactate dehydrogenase (LDH) increased in a time-dependent manner, suggesting the presence of necrotic cells that were dispersed in the cellular aggregates. The occurrence of hypoxia process was suggested by the up-regulation of Hsp70 protein expression and increased level of nitric oxide (NO). Moreover, the up-regulation of HIF-1α and poli-ubiquitinated Nrf2 protein expressions and decreased level of reduced glutathione (GSH) indicated the presence of an acute hypoxic environment in MDA-MB-231 3D aggregates. In conclusion, the MDA-MB-231 3D models generated through hanging drop are compact and loose aggregates characterized by an acute hypoxic condition.

Automated evaluation of tumor spheroid behavior in 3D culture using deep learning-based recognition

Three-dimensional in vitro tumor models provide more physiologically relevant responses to drugs than 2D models, but the lack of proper evaluation indices and the laborious quantitation of tumor behavior in 3D have limited the use of 3D tumor models in large-scale preclinical drug screening. Here we propose two indices of 3D tumor invasiveness-the excess perimeter index (EPI) and the multiscale entropy index (MSEI)-and combine these indices with a new convolutional neural network-based algorithm for tumor spheroid boundary detection. This new algorithm for 3D tumor boundary detection and invasiveness analysis is more accurate than any other existing algorithms. We apply this spheroid monitoring and AI-based recognition technique ("SMART") to evaluating the invasiveness of tumor spheroids grown from tumor cell lines and from primary tumor cells in 3D culture.

Electrochemical mapping of oxygenation in the three-dimensional multicellular tumour hemi-spheroid

Blood capillaries deliver oxygen and nutrients to surrounding micro-regions of tissue and carry away metabolic waste. In normal tissue, capillaries are close enough to keep all the cells viable. In solid tumours, the capillary system is chaotic and typical inter-capillary distances are larger than in normal tissue. Therefore, hypoxic regions develop. Drug molecules may not reach these areas at concentrations above the lethal level. The combined effect of low drug concentrations and local hypoxia, often exacerbated by acidity, leads to therapy failure. To better understand the interplay between hypoxia and poor drug penetration, oxygenation needs to be assessed in different areas of inter-capillary tissue. The multicellular tumour spheroid is a well-established three-dimensional (3D) in vitro model of the capillary microenvironment. It is used to mimic nascent tumours and micro-metastases as well. In this work, we demonstrate for the first time that dynamic intra-spheroidal oxygen maps can be obtained at the 3D multicellular tumour hemi-spheroid (MCH) using a non-invasive microelectrode array. The same oxygen distributions exist inside the equivalent but less accessible full spheroid. The MCH makes high throughput-high content analysis of spheroids feasible and thus can assist studies on basic cancer biology, drug development and personalized medicine.

Formation, Growth and Morphology of Multicellular Tumor Spheroids from a Human Colon Carcinoma Cell Line (LoVo)

LoVo human colon carcinoma cells cultured by a liquid overlay technique form and grow as multicellular tumor spheroids. The growth curve of LoVo spheroids exhibits Gompertzian growth kinetics, i.e., exponential growth for 10 days, followed by exponential retardation in the rate of growth. Doubling time in the exponential growth phase is longer than in monolayer cultures (5 days for LoVo spheroids vs. 37 h for monolayers). When LoVo spheroids reach a diameter of about 300 ūm, a necrotic core appears in their center and continuously increases with spheroid growth. The cell ultrastructure and organization in spheroids closely resemble those of the same cells when grown as tumors in vivo or as monolayer, i.e. intestinal epithelium, desmosomes, intracytoplasmic lumina and acinar structures. Individual cells from spheroids can be obtained by trypsinization and assayed for colony formation. LoVo spheroids provide a model which can be readily manipulated and appears to be suitable for evaluation of anticancer drugs. A comparison of LoVo spheroids exposed to doxorubicin with the same cells grown in monolayers emphasized the role of cell organization in determining drug resistance.

Enhanced Osteogenic Differentiation Potential of Stem-Cell Spheroids Created From a Coculture of Stem Cells and Endothelial Cells

PURPOSE

This study was performed to fabricate stem-cell spheroids formed with human gingiva-derived stem cells and endothelial cells and to evaluate their viability and osteogenic differentiation potential.

MATERIALS AND METHODS

Gingiva-derived stem cells were isolated, and stem cells and endothelial cells with a total of 6 × 10 cells were seeded into concave micromolds with different ratios of 6:0 (group 1), 4:2 (group 2), 3:3 (group 3), and 2:4 (group 4).

RESULTS

Gingiva-derived stem cells and/or endothelia cells formed spheroids in concave microwells. There was a decreasing trend in the diameter of spheroids with increasing amounts of endothelial cells, but there were no statistically significant differences between the groups. The secretion of vascular endothelial growth factor from the spheroids was noted. The results of the alkaline phosphatase activity assays showed significantly higher values for groups 2, 3, and 4 when compared with the value of group 1.

CONCLUSIONS

Conclusively, stem-cell spheroids formed with human gingiva-derived stem cells and endothelial cells using concave microwells enhanced osteogenic differentiation potential, and multicell spheroid-based cell delivery could be a simple and effective strategy for improving stem-cell therapy.

Importance of endogenous extracellular matrix in biomechanical properties of human skin model

The physical and mechanical properties of cells modulate their behavior such proliferation rate, migration and extracellular matrix remodeling. In order to study cell behavior in a tissue-like environment in vitro, it is of utmost importance to develop biologically and physically relevant 3D cell models. Here, we characterized the physical properties of a single cell type growing in configurations of increasing complexity. From one human skin biopsy, primary dermal fibroblasts were isolated and seeded to give monolayer (2D model), spheroid (3D model poor in extracellular matrix) and tissue-engineered cell sheet (3D model rich in endogenous extracellular matrix). Living native human dermis tissue was used as a gold standard. Nanomechanical and viscoelastic properties at the cell scale were measured by atomic force microscopy (AFM) while biphoton microscopy allowed collagen detection by second harmonic generation and scanning electron microscopy helped in model morphological characterization. In all models, fibroblasts presented a similar typical elongated cell shape, with a cytoskeleton well-arranged along the long axis of the cell. However, elastic moduli of the tissue-engineered cell sheet and native dermis tissue were similar and statistically lower than monolayer and spheroid models. We successfully carried out AFM force measurements on 3D models such as spheroids and tissue-engineered cell sheets, as well as on living native human tissue. We demonstrated that a tissue-engineered dermal model recapitulates the mechanical properties of human native dermal tissue unlike the classically used monolayer and spheroid models. Furthermore, we give statistical evidence to indicate a correlation between cell mechanical properties and the presence of collagens in the models studied.

Sialylation facilitates self-assembly of 3D multicellular prostaspheres by using cyclo-RGDfK(TPP) peptide

Background

Prostaspheres-based three dimensional (3D) culture models have provided insight into prostate cancer (PCa) biology, highlighting the importance of cell–cell interactions and the extracellular matrix (EMC) in the tumor microenvironment. Although these 3D classical spheroid platforms provide a significant advance over 2D models mimicking in vivo tumors, the limitations involve no control of assembly and structure with only limited spatial or glandular organization. Here, matrix-free prostaspheres from human metastatic prostate carcinoma PC3 and DU145 cell lines and their respective gemcitabine resistant (GemR) variants were generated by using cyclic Arg-Gly-Asp-D-Phe-Lys peptide modified with 4-carboxybutyl-triphenylphosphonium bromide (cyclo-RGDfK(TPP)).

Materials and methods

Microscopic imaging, immunocytochemistry (ICC), flow cytometry, sialidase, and WST-1 cell viability assays were used to evaluate the formation of multicellular tumor spheroid (MCTS), cell survival, morphologic changes, and expression levels of α2,6 and α2,3 sialic acid (SA) and E- and N-cadherin in DU145, PC3, and their GemR variants.

Results

By using the cyclo-RGDfK(TPP) peptide platform in a dose- and time-dependent manner, both DU145 and DU145GemR cells formed small MCTS. In contrast, PC3 and PC3GemR cells formed irregular multicellular aggregates at all concentrations of cyclo-RGDfK(TPP) peptide, even after 6 days of incubation. ICC and flow cytometry results revealed that DU145 cells expressed higher amounts of E-cadherin but lower N-cadherin compared with PC3 cells. By using Maackia amurensis (α2,3-SA-specific MAL-II) and Sambucus nigra (α2,6-SA specific SNA) lectin-based cytochemistry staining and flow cytometry, it was found that DU145 and DU145GemR cells expressed 5 times more α2,6-SA than α2,3-SA on the cell surface. PC3 cells expressed 4 times more α2,3-SA than α2,6-SA, and the PC3GemR cells showed 1.4 times higher α2,6-SA than α2,3-SA. MCTS volume was dose-dependently reduced following pretreatment with α2,6-SA-specific neuraminidase (Vibrio cholerae). Oseltamivir phosphate enhanced cell aggregation and compaction of 3D MCTS formed with PC3 cells.

Conclusion

The relative levels of specific sialoglycan structures on the cell surface correlate with the ability of PCa cells to form avascular multicellular prostaspheres.

On the morphological stability of multicellular tumour spheroids growing in porous media

Multicellular tumour spheroids (MCTSs) are extensively used as in vitro system models for investigating the avascular growth phase of solid tumours. In this work, we propose a continuous growth model of heterogeneous MCTSs within a porous material, taking into account a diffusing nutrient from the surrounding material directing both the proliferation rate and the mobility of tumour cells. At the time scale of interest, the MCTS behaves as an incompressible viscous fluid expanding inside a porous medium. The cell motion and proliferation rate are modelled using a non-convective chemotactic mass flux, driving the cell expansion in the direction of the external nutrients' source. At the early stages, the growth dynamics is derived by solving the quasi-stationary problem, obtaining an initial exponential growth followed by an almost linear regime, in accordance with experimental observations. We also perform a linear-stability analysis of the quasi-static solution in order to investigate the morphological stability of the radially symmetric growth pattern. We show that mechano-biological cues, as well as geometric effects related to the size of the MCTS subdomains with respect to the diffusion length of the nutrient, can drive a morphological transition to fingered structures, thus triggering the formation of complex shapes that might promote tumour invasiveness. The results also point out the formation of a retrograde flow in the MCTS close to the regions where protrusions form, that could describe the initial dynamics of metastasis detachment from the in vivo tumour mass. In conclusion, the results of the proposed model demonstrate that the integration of mathematical tools in biological research could be crucial for better understanding the tumour's ability to invade its host environment.

Engineered bacteria detect spatial profiles in glucose concentration within solid tumor cell masses

Tumor heterogeneity makes cancer difficult to treat. Many small molecule cancer drugs target rapidly dividing cells on the periphery of tumors but have difficulty in penetrating deep into tumors and are ineffective at treating entire tumors. Targeting both rapidly dividing and slower growing regions of tumors is essential to effectively treat cancer. A cancer drug carrier that penetrates deep into tumors and identifies metabolically activity could supply treatment to those areas based on the local microenvironment. We hypothesized that glucose sensing bacteria could identify sugar gradients in solid tumors. To test this hypothesis, a genetic circuit was designed to trigger expression of a green fluorescent protein (GFP) reporter through the chemotaxis-osmoporin fusion protein, Trz1, a receptor for sensing glucose and ribose sugars. E. coli equipped with the Trz1-GFP expression system, were administered to an in vitro model of a continuously perfused tumor tissue that mimics systemic delivery and clearance of bacteria through a blood vessel adjacent to a solid tumor. The level of GFP expressed, per bacterium, was time independent and indicated the glucose concentration as a function of penetration depth within the microfluidic tumors. The measured glucose concentration, correlated (P-value = 2.6 × 10(-5) ) with tumor cell viability as a function of depth. Mathematical analysis predicted drug delivery by glucose-sensing bacteria would eliminate a higher percentage of the viable tumor cell population than a systemically administered drug. Glucose-sensing bacteria could deliver cancer therapies with increased drug penetration and nutrient-dependent dosing to continuously treat viable regions of cancer tissue that have a higher prevalence for metastatic dissemination. Biotechnol. Bioeng. 2016;113: 2474-2484. © 2016 Wiley Periodicals, Inc.

Cultured circulating tumor cells and their derived xenografts for personalized oncology

Recent cancer research has demonstrated the existence of circulating tumor cells (CTCs) in cancer patient's blood. Once identified, CTC biomarkers will be invaluable tools for clinical diagnosis, prognosis and treatment. In this review, we propose ex vivo culture as a rational strategy for large scale amplification of the limited numbers of CTCs from a patient sample, to derive enough CTCs for accurate and reproducible characterization of the biophysical, biochemical, gene expressional and behavioral properties of the harvested cells. Because of tumor cell heterogeneity, it is important to amplify all the CTCs in a blood sample for a comprehensive understanding of their role in cancer metastasis. By analyzing critical steps and technical issues in ex vivo CTC culture, we developed a cost-effective and reproducible protocol directly culturing whole peripheral blood mononuclear cells, relying on an assumed survival advantage in CTCs and CTC-like cells over the normal cells to amplify this specified cluster of cancer cells.

Colorectal cancer derived organotypic spheroids maintain essential tissue characteristics but adapt their metabolism in culture

BACKGROUND

Organotypic tumor spheroids, a 3D in vitro model derived from patient tumor material, preserve tissue heterogeneity and retain structural tissue elements, thus replicating the in vivo tumor more closely than commonly used 2D and 3D cell line models. Such structures harbour tumorigenic cells, as revealed by xenograft implantation studies in animal models and maintain the genetic makeup of the original tumor material. The aim of our work was a morphological and proteomic characterization of organotypic spheroids derived from colorectal cancer tissue in order to get insight into their composition and associated biology.

RESULTS

Morphological analysis showed that spheroids were of about 250 μm in size and varied in structure, while the spheroid cells differed in shape and size and were tightly packed together by desmosomes and tight junctions. Our proteomic data revealed significant alterations in protein expression in organotypic tumor spheroids cultured as primary explants compared to primary colorectal cancer tissue. Components underlying cellular and tissue architecture were changed; nuclear DNA/ chromatin maintenance systems were up-regulated, whereas various mitochondrial components were down-regulated in spheroids. Most interestingly, the mesenchymal cells appear to be substantial component in such cellular assemblies. Thus the observed changes may partly occur in this cellular compartment. Finally, in the proteomics analysis stem cell-like characteristics were observed within the spheroid cellular assembly, reflected by accumulation of Alcam, Ctnnb1, Aldh1, Gpx2, and CD166. These findings were underlined by IHC analysis of Ctnnb1, CD24 and CD44, therefore warranting closer investigation of the tumorigenic compartment in this 3D culture model for tumor tissue.

CONCLUSIONS

Our analysis of organotypic CRC tumor spheroids has identified biological processes associated with a mixture of cell types and states, including protein markers for mesenchymal and stem-like cells. This 3D tumor model in which tumor heterogeneity is preserved may represent an advantageous model system to investigate novel therapeutic approaches.

Superhydrophobic chips for cell spheroids high-throughput generation and drug screening

We suggest the use of biomimetic superhydrophobic patterned chips produced by a benchtop methodology as low-cost and waste-free platforms for the production of arrays of cell spheroids/microtissues by the hanging drop methodology. Cell spheroids have a wide range of applications in biotechnology fields. For drug screening, they allow studying 3D models in structures resembling real living tissues/tumors. In tissue engineering, they are suggested as building blocks of bottom-up fabricated tissues. We used the wettability contrast of the chips to fix cell suspension droplets in the wettable regions and evaluated on-chip drug screening in 3D environment. Cell suspensions were patterned in the wettable spots by three distinct methods: (1) by pipetting the cell suspension directly in each individual spot, (2) by the continuous dragging of a cell suspension on the chip, and (3) by dipping the whole chip in a cell suspension. These methods allowed working with distinct throughputs and degrees of precision. The platforms were robust, and we were able to have static or dynamic environments in each droplet. The access to cell culture media for exchange or addition/removal of components was versatile and opened the possibility of using each spot of the chip as a mini-bioreactor. The platforms' design allowed for samples visualization and high-content image-based analysis on-chip. The combinatorial analysis capability of this technology was validated by following the effect of doxorubicin at different concentrations on spheroids formed using L929 and SaOs-2 cells.

Polymeric micelles encapsulating photosensitizer: structure/photodynamic therapy efficiency relation

Various polymeric micelles were formed from amphiphilic block copolymers, namely, poly(ethyleneoxide-b-ε-caprolactone), poly(ethyleneoxide-b-d,l-lactide), and poly(ethyleneoxide-b-styrene). The micelles were characterized by static and dynamic light scattering, electron microscopy, and asymmetrical flow field-flow fractionation. They all displayed a similar size close to 20 nm. The influence of the chemical structure of the block copolymers on the stability upon dilution of the polymeric micelles was investigated to assess their relevance as carriers for nanomedicine. In the same manner, the stability upon aging was assessed by FRET experiments under various experimental conditions (alone or in the presence of blood proteins). In all cases, a good stability over 48 h for all systems was encountered, with PDLLA copolymer-based systems being the first to release their load slowly. The cytotoxicity and photocytotoxicity of the carriers were examined with or without their load. Lastly, the photodynamic activity was assessed in the presence of pheophorbide a as photosensitizer on 2D and 3D tumor cell culture models, which revealed activity differences between the 2D and 3D systems.

Rapid uptake of glucose and lactate, and not hypoxia, induces apoptosis in three-dimensional tumor tissue culture

The spatial arrangement of cellular metabolism in tumor tissue critically affects the treatment of cancer. However, little is known about how diffusion and cellular uptake relate to intracellular metabolism and cell death in three dimensions. To quantify these mechanisms, fluorescent microscopy and multicellular tumor cylindroids were used to measure pH and oxygen profiles, and quantify the distribution of viable, apoptotic and necrotic cells. Spheroid dissociation, enzymatic analysis, and mass spectrometry were used to measure concentration profiles of glucose, lactate and glutamine. A mathematical model was used to integrate these measurements and calculate metabolic rate parameters. It was found that large cylindroids, >500 μm in diameter, contained apoptotic and necrotic cells, whereas small cylindroids contained apoptotic but not necrotic cells. The center of cylindroids was found to be acidic but not hypoxic. From the edge to the center, concentrations of glucose, lactate and glutamine decreased rapidly. Throughout the cell masses lactate was consumed and not produced. These measurements indicate that apoptosis was the primary mechanism of cell death; acidity was not caused by lactic acid; and cell death was caused by depletion of carbon sources and not hypoxia. The mathematical model showed that the transporter enzymes for glucose and lactate were not saturated; oxygen uptake was limited by intracellular metabolism; and oxygen uptake was not limited by membrane-transport or diffusion. Unsaturated transmembrane uptake may be the cause of both proliferative and apoptotic regimes in cancer. These results suggest that transporter enzymes are excellent targets for treating well oxygenated tumors.

Development of a human three-dimensional organotypic skin-melanoma spheroid model for in vitro drug testing

Despite remarkable efforts, metastatic melanoma (MM) still presents with significant mortality. Recently, mono-chemotherapies are increasingly replenished by more cancer-specific combination therapies involving death ligands and drugs interfering with cell signaling. Still, MM remains a fatal disease because tumors rapidly develop resistance to novel therapies thereby regaining tumorigenic capacity. Although genetically engineered mouse models for MM have been developed, at present no model is available that reliably mimics the human disease and is suitable for studying mechanisms of therapeutic obstacles including cell death resistance. To improve the increasing requests on new therapeutic alternatives, reliable human screening models are demanded that translate the findings from basic cellular research into clinical applications. By developing an organotypic full skin equivalent, harboring melanoma tumor spheroids of defined sizes we have invented a cell-based model that recapitulates both the 3D organization and multicellular complexity of an organ/tumor in vivo but at the same time accommodates systematic experimental intervention. By extending our previous findings on melanoma cell sensitization toward TRAIL (tumor necrosis factor-related apoptosis-inducing ligand) by co-application of sublethal doses of ultraviolet-B radiation (UVB) or cisplatin, we show significant differences in the therapeutical outcome to exist between regular two-dimensional (2D) and complex in vivo-like 3D models. Of note, while both treatment combinations killed the same cancer cell lines in 2D culture, skin equivalent-embedded melanoma spheroids are potently killed by TRAIL+cisplatin treatment but remain almost unaffected by the TRAIL+UVB combination. Consequently, we have established an organotypic human skin-melanoma model that will facilitate efforts to improve therapeutic outcomes for malignant melanoma by providing a platform for the investigation of cytotoxic treatments and tailored therapies in a more physiological setting.

3D spheroids' sensitivity to electric field pulses depends on their size

Dramatic differences of cells behavior exist between cells cultured under classical 2D monolayers and 3D models, the latter being closer to in vivo responses. Thus, many 3D cell culture models have been developed. Among them, multicellular tumor spheroid appears as a nice and easy-to-handle 3D model based on cell adhesion properties. It is composed of one or several cell types and is widely used to address carcinogenesis, or drugs screening. A few and recent publications report the use of spheroids to investigate electropermeabilization process. We studied the response of spheroids to electrical field pulses (EP) in terms of their age, diameter or formation technique. We found that small human HCT-116 colorectal spheroids are more sensitive to electric field pulses than larger ones. Indeed, the growth of spheroids with a diameter of 300 μm decreased by a factor 2 over 4 days when submitted to EP (8 pulses, lasting 100 μs at a 1,300 V/cm field intensity). Under those electrical conditions, 650 μm spheroids were not affected. These data were the same whatever the formation method (i.e. hanging drop and nonadherent techniques). These observations point out the fact that characteristics of 3D cell models have to be taken into account to avoid biased conclusions of experimental data.

Opportunities and challenges for use of tumor spheroids as models to test drug delivery and efficacy

Multicellular spheroids are three dimensional in vitro microscale tissue analogs. The current article examines the suitability of spheroids as an in vitro platform for testing drug delivery systems. Spheroids model critical physiologic parameters present in vivo, including complex multicellular architecture, barriers to mass transport, and extracellular matrix deposition. Relative to two-dimensional cultures, spheroids also provide better target cells for drug testing and are appropriate in vitro models for studies of drug penetration. Key challenges associated with creation of uniformly sized spheroids, spheroids with small number of cells and co-culture spheroids are emphasized in the article. Moreover, the assay techniques required for the characterization of drug delivery and efficacy in spheroids and the challenges associated with such studies are discussed. Examples for the use of spheroids in drug delivery and testing are also emphasized. By addressing these challenges with possible solutions, multicellular spheroids are becoming an increasingly useful in vitro tool for drug screening and delivery to pathological tissues and organs.

A microfluidic system for investigation of extravascular transport and cellular uptake of drugs in tumors

Three-dimensional (3D) tumor models have been established in various microfluidic systems for drug delivery and resistance studies in vitro. However, one of the main drawbacks of these models is non-uniform distribution of cells, leaving regions with very low cell density within the 3D structures. As a result, molecular diffusion in the cell compartments is faster than that observed in solid tumors. To solve this problem, we developed a new technique for preparation of 3D tumor models in vitro. It was based on a microfluidic device containing three parallel channels separated by narrowly spaced posts. Tumor cells were loaded into the central channel at high density. To test the system, B16.F10 melanoma cells were perfusion-cultured overnight and the resulting 3D structure was characterized in terms of viability, density, and morphology of cells as well as transport properties of small fluorescent molecules. Immediately upon loading of tumor cells, the cell density was comparable to those observed in B16.F10 tumor tissues in vivo; and the viability of tumor cells was maintained through the overnight culture. The tumor model displayed low extracellular space and high resistance to diffusion of small molecules. For membrane-permeant molecules (e.g., Hoechst 33342), the rate of interstitial penetration was extremely slow, compared to membrane-impermeant molecules (e.g., sodium fluorescein). This versatile tumor model could be applied to in vitro studies of transport and cellular uptake of drugs and genes.

Towards automated production and drug sensitivity testing using scaffold-free spherical tumor microtissues

Although the relevance of three-dimensional (3-D) culture has been recognized for years and exploited at an academic level, its translation to industrial applications has been slow. The development of reliable high-throughput technologies is clearly a prerequisite for the industrial implementation of 3-D models. In this study the robustness of spherical microtissue production and drug testing in a 96-well hanging-drop multiwell plate format was assessed on a standard 96-well channel robotic platform. Microtissue models derived from six different cell lines were produced and characterized according to their growth profile and morphology displaying high-density tissue-like reformation and growth over at least 15 days. The colon cancer cell line HCT116 was chosen as a model to assess microtissue-based assay reproducibility. Within three individual production batches the size variations of the produced microtissues were below 5%. Reliability of the microtissue-based assay was tested using two reference compounds, staurosporine and chlorambucil. In four independent drug testings the calculated IC(50) values were benchmarked against 2-D multiwell testings displaying similar consistency. The technology presented here for the automated production of a variety of microtissues for efficacy testing in a standard 96-well format will aid the implementation of more organotypic models at an early time point in the drug discovery process.

Turning round: multipotent stromal cells, a three-dimensional revolution?

Mesenchymal stromal cells (MSC) can be isolated from adult tissues and induced to differentiate into skeletal cells, such as osteoblasts, chondrocytes and adipocytes. Consequently, ex vivo MSC are valuable systems for studying the mechanisms that control tissue-context lineage commitment and may offer broad therapeutic applications in the orthopedic theater and beyond. To date, most of these studies have used MSC grown on two-dimensional (2-D) plastic surfaces. The use of three-dimensional (3-D) in vitro growth techniques for MSC may accelerate these areas of research by providing a more representative 'in vivo-like' environment, where cells interact with each other and their cellular products, rather than a plastic surface. We introduce some of the techniques used for 3-D in vitro cultures and how they relate to the MSC field. We will present evidence of how MSC grown as 3-D spheroids not only permits appropriate MSC-like behavior, but appears to promote their stem-cell attributes and therapeutic benefit in applications ranging from regenerative medicine to anti-inflammatory treatments and cancer therapy. 3-D culture techniques also allow de/reconstruction of the specialized in vivo niche of the tissue-resident stem cell where microenvironmental influences can be recognized.

Proliferation behavior of E. coli in a three-dimensional in vitro tumor model

Advances in genetic engineering of non-pathogenic Escherichia coli (E. coli) have made this organism an attractive candidate for gene delivery vehicle. However, proliferation and transport behaviors of E. coli in three-dimensional (3D) tumor environment are still unclear. To this end, we developed a novel microfluidics-based tumor model that permitted direct in situ visualization of E. coli in a 3D environment with densely packed tumor cells (B16.F10 or EMT6). The E. coli was engineered to co-express two proteins invasin and mCherry (inv(+)) so that they had the ability to enter mammalian cells and could be visualized via fluorescence microscopy. E. coli expressing mCherry alone (inv(-)) was used as the control counterpart. The inv(-) bacteria proliferated to a higher extent than inv(+) bacteria in both the 3D tumor model and a 2D monolayer culture model. Meanwhile, the proliferation appeared to be tumor cell type dependent since bacteria did not proliferate as well in the EMT6 model compared to the B16.F10 model. These differences in bacterial proliferation were likely to be caused by inhibitors secreted by tumor cells, as suggested by our data from the bacterial-tumor cell monolayer co-culture experiment. The bacterial proliferation provided a driving force for E. coli spreading in the 3D interstitial space of tumors. These findings are useful for researchers to develop novel strategies for improvement of bacteria-mediated oncolysis or gene delivery in cancer treatment.

[Microencapsulated multicellular tumor spheroids: preparation and use as a novel in vitro model for drug screening]

In the current study a technique for microencapsulation of human breast adenocarcinoma cells MCF-7 in alginate-chitosan microcapsules is used. Microencapsulation is proposed to generate multicellular tumor spheroids (MTS) based on these cells and to test them further as an in vitro model for anti-tumor drug screening. Cytotoxicity of methotrexate (MTX) was studied on the obtained MTS. A set of MTS with mean size of 150, 200 and 300 m was prepared in function of a cultivation time. After incubation of MTS in cultivation medium containing MTX at concentrations of 1, 2, 10, 50 and 100 nM for 48 hs cell viability was evaluated. MTS were shown to be more resistant to MTX than the monolayer culture, and the resistance to MTX was increased with enhancing a spheroid size. At MTX concentration of 100 nM a number of viable cells in MTS with the size of 300 m was 2.5-fold bigger than that one in monolayer culture. It is suggested that the cells in microencapsulated MTS can better mimic cell behavior in a small size solid tumor than the cells in a monolayer culture. In future microencapsulated MTS can be proposed as a novel in vitro model for anticancer drug screening.

Localization of complexed anticytokeratin 8 scFv TS1-218 to HeLa HEp-2 multicellular tumor spheroids and experimental tumors

Recombinant single-chain fragment variable (scFv) antibodies with specificity to tumor antigens can be used to target tumors in vivo. The approach to use administration of complexes of idiotypic-anti-idiotypic scFvs when targeting tumors has not been tested earlier, and from a theoretical point it could contribute to longer in vivo circulation and improved targeting efficiency by dissociation, when in contact with the target antigen. In this study two models to evaluate the targeting efficiency of such complexes were used. HeLa HEp-2 tumor cells were grown as multicellular tumor spheroids (MCTS) and exposed to the antibody constructs in vitro. The behavior in vivo was tested in an in vivo tumor xenograft model. To increase the size of the anticytokeratin 8 scFv, TS1-218, complexes were formed between TS1-218 and its anti-idiotype, alphaTS1 scFv. The functionality of (125)I-labeled TS1-218 alone and in complex was studied in both models. The uptake patterns were similar in both models. The idiotypic TS1-218 was able to localize to the MCTS and xenografted tumors, both alone and in complex with alphaTS1 scFv. TS1-218 in complex, however, demonstrated a significantly higher uptake than the monomeric TS1-218 in both models (p < 0.0005 and p < 0.0089, respectively). When complexes were administered in vivo, a slower clearance and an increased tumor half-life could be observed. The present investigation indicates that administration of targeting antibodies, with initially blocked antigen-binding sites by complex formation with their anti-idiotypes, may improve targeting efficiency.

Development of a three-dimensional model for rapid evaluation of bone substitutes in vitro: effect of the 45S5 bioglass

The evaluation of innovative bone substitutes requires the development of an optimal model close to physiological conditions. An interesting alternative is the use of an immortalized cell line to construct multicellular spheroids, that is, three-dimensional (3D) cultures. In this study, a modified hanging drops method has resulted in the generation of spheroids with a well-established human fetal osteoblasts line (hFOB 1.19), and tests have been focused on the effect of 45S5 bioglass ionic dissolution products in comparison with two-dimensional (2D) cultures. Depending on cell culture type, quantitative analysis (cell proliferation, viability/cytotoxicity, and cellular cycle) and qualitative analysis (electron microscopy and genes expression) showed a differential effect. Cell proliferation was enhanced in 2D-conditioned cultures in accordance with literature data, but decreased in 3D cultures submitted to the same conditions, without change of gene expression patterns. The decrease of cell proliferation, observed in conditioned spheroids, appears to be in agreement with clinical observations showing the insufficiency of commercially available bioglasses for bone repairing within nonbearing sites, such as periodontal defects or small bone filling, in general. Therefore, we suggest that this model could be adapted to the screening of innovative bioactive materials by laboratory techniques already available and extended monitoring of their bioactivity.

A multipurpose microfluidic device designed to mimic microenvironment gradients and develop targeted cancer therapeutics

The heterogeneity of cellular microenvironments in tumors severely limits the efficacy of most cancer therapies. We have designed a microfluidic device that mimics the microenvironment gradients present in tumors that will enable the development of more effective cancer therapies. Tumor cell masses were formed within micron-scale chambers exposed to medium perfusion on one side to create linear nutrient gradients. The optical accessibility of the PDMS and glass device enables quantitative transmitted and fluorescence microscopy of all regions of the cell masses. Time-lapse microscopy was used to measure the growth rate and show that the device can be used for long-term efficacy studies. Fluorescence microscopy was used to demonstrate that the cell mass contained viable, apoptotic, and acidic regions similar to in vivo tumors. The diffusion coefficient of doxorubicin was accurately measured, and the accumulation of therapeutic bacteria was quantified. The device is simple to construct, and it can easily be reproduced to create an array of in vitro tumors. Because microenvironment gradients and penetration play critical roles controlling drug efficacy, we believe that this microfluidic device will be vital for understanding the behavior of common cancer drugs in solid tumors and designing novel intratumorally targeted therapeutics.

Single-cell analysis demonstrates how nutrient deprivation creates apoptotic and quiescent cell populations in tumor cylindroids

Understanding how quiescent and apoptotic populations form in tumors is necessary because these cell types can considerably diminish therapeutic efficacy. Most cancer therapeutics are ineffective against quiescent cells because they target rapidly proliferating cells. Distinguishing apoptosis is important because apoptotic cells are committed to death and do not require treatment. Regrowth of quiescent cell can lead to tumor re-occurrence and metastasis, which are the leading causes of cancer mortality. We hypothesized that cylindroid cultures and acridine orange staining could be used to determine how nutrient diffusion creates apoptotic and quiescent regions in tumors. To test this hypothesis we developed a microscopy technique to measure cellular DNA and RNA content in single cells using thin cylindroids and acridine orange staining. Cell classification was compared to flow cytometry of cells grown in defined monolayer cultures. The presence of apoptosis was confirmed by morphological nuclear analysis. The effect of diffusion was determined by varying incubation time, cylindroid size, and exposing cylindroids to nutrient-deficient media. Four overlapping regions were identified as a function of cylindroid radius: an outer viable/quiescent region; a second quiescent/apoptotic region; a third late-stage apoptotic region; and an inner dead region. In monolayer cultures the absence of glutamine and growth factors induced apoptosis and hypoxia induced quiescence. Treating with nutrient-deficient media suggested that cells became quiescent near the periphery because of glucose and oxygen limitations, and became apoptotic and died further from the edge because of glutamine and growth factor limitations. These results show that cellular microenvironments can be identified in cylindroids using simple acridine orange staining and that single cell fluorescence can be measured in three-dimensional culture. The developed techniques will be useful for developing cancer therapies and determining how cell death and apoptosis are induced in three-dimensional tumor tissue.

Three-dimensional neuroblastoma cell culture: proteomic analysis between monolayer and multicellular tumor spheroids

INTRODUCTION

Solid tumors, such as neuroblastoma (NB), are associated with a heterogeneous cell environment. Multicellular tumor spheroid (MCTS) cultures have been shown to better mimic growth characteristics of in vivo solid tumors. Because tumor spheroid growth patterns may be quite different from standard two-dimensional culture systems, we sought to compare the protein expression profiles of two- and three-dimensional in vitro NB cultures, i.e., monolayers and MCTS.

MATERIALS AND METHODS

Human NB cells were grown as both monolayers and spheres. Nuclear and cytosolic proteins were analyzed for differentially secreted proteins by two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) and selected polypeptides were identified by mass spectrometry (LC-MS/MS).

RESULTS

Several metabolic (transketolase, triosephosphate isomerase, pyruvate kinase M1/M2, alpha enolase, and phosphoglycerate mutase-1), cell stress response (heat shock proteins (HSP) 90, 70, and 60; antioxidant, thioredoxin), cell structure (septin 2, adenyl cyclase-associated protein-1), tubulin beta-2 chain, actin, translationally controlled tumor protein and cofilin), signal transduction (peptidyl prolyl cis/trans isomerase A), biosynthetic (phosphoserine aminotransferase) and transport (cellular retinoic acid binding protein 1) polypeptides were overexpressed in spheroids. Several protein groups were differentially expressed between NB monolayers and spheroids.

CONCLUSION

The altered proteins among NB spheroids may represent an important link between monolayer cell cultures and in vivo experiments and thus a more ideal in vitro culture system for determining the precise three-dimensional microenvironment of NB.

Thymoquinone reduces mouse colon tumor cell invasion and inhibits tumor growth in murine colon cancer models

We have shown that thymoquinone (TQ) is a potent antitumor agent in human colorectal cancer cells. In this study, we evaluated TQ's therapeutic potential in two different mice colon cancer models [1,2-dimethyl hydrazine (DMH) and xenografts]. We also examined TQ effects on the growth of C26 mouse colorectal carcinoma spheroids and assessed tumor invasion in vitro. Mice were treated with saline, TQ, DMH, or combinations once per week for 30 weeks and the multiplicity, size and distribution of aberrant crypt foci (ACF) and tumors were determined at weeks 10, 20 and 30. TQ injected intraperitoneally (i.p.) significantly reduced the numbers and sizes of ACF at week 10; ACF numbers were reduced by 86%. Tumor multiplicity was reduced at week 20 from 17.8 in the DMH group to 4.2 in mice injected with TQ. This suppression was observed at week 30 and was long-term; tumors did not re-grow even when TQ injection was discontinued for 10 weeks. In a xenograft model of HCT116 colon cancer cells, TQ significantly (P < 0.05) delayed the growth of the tumor cells. Using a matrigel artificial basement membrane invasion assay, we demonstrated that sub-cyto-toxic doses of TQ (40μM) decreased C26 cell invasion by 50% and suppressed growth in three-dimensional spheroids. Apoptotic signs seen morphologically were increased significantly in TQ-treated spheroids. TUNEL staining of xenografts and immunostaining for caspase 3 cleavage in DMH tumors confirmed increased apoptosis in mouse tumors in response to TQ. These data should encourage further in vivo testing and support the potential use of TQ as a therapeutic agent in human colorectal cancer.

Differential effects of combined Ad5- delta 24RGD and radiation therapy in in vitro versus in vivo models of malignant glioma

PURPOSE

The integrin-targeted conditionally replicating adenovirus Ad5-delta 24RGD has been shown to possess strong oncolytic activity in experimental tumors and is currently being developed toward phase I clinical evaluation for ovarian cancer and malignant glioma. Previously, we reported that combination therapy of Ad5-delta 24RGD with irradiation led to synergistic antitumor activity in s.c. glioma xenografts. In the current study, the underlying mechanism of action to this synergy was studied and the effects of combined therapy were assessed in an orthotopic glioma model.

EXPERIMENTAL DESIGN AND RESULTS

Sequencing studies in U-87 monolayers showed that delivery of irradiation before Ad5-delta 24RGD infection led to a greater oncolytic effect than simultaneous delivery or infection before irradiation. This effect was not due to enhanced virus production or release. Experiments using a luciferase-encoding vector revealed a small increase in transgene expression in irradiated cells. In tumor spheroids, combination therapy was more effective than Ad5-delta 24RGD or irradiation alone. Staining of spheroid sections showed improved penetration of virus to the core of irradiated spheroids. Mice bearing intracranial tumors received a combination of Ad5-delta 24RGD with 1 x 5 Gy total body irradiation or with 2 x 6 Gy whole brain irradiation. In contrast to the in vitro data and reported results in s.c. tumors, addition of radiotherapy did not significantly enhance the antitumor effect of Ad5-delta 24RGD.

CONCLUSIONS

Combined treatment with Ad5-delta 24RGD and irradiation shows enhanced antitumor activity in vitro and in s.c. tumors, but not in an orthotopic glioma model. These differential results underscore the significance of the selected tumor model in assessing the effects of combination therapies with oncolytic adenoviruses.

Flux analysis shows that hypoxia-inducible-factor-1-alpha minimally affects intracellular metabolism in tumor spheroids

Heterogeneous metabolic microenvironments in tumors affect local cell growth, survival, and overall therapeutic efficacy. Hypoxia-inducible-factor-1alpha (HIF-1alpha) is a transcription factor that responds to low-oxygen environments by upregulating genes for cell survival and metabolism. To date, the metabolic effects of HIF-1alpha in three-dimensional tissue have not been investigated. Preliminary experiments have shown that the effects of HIF-1alpha are dependent on glucose availability. Based on this observation, we hypothesized that HIF-1alpha would not affect cell survival and metabolism in the center of spheroids, where the concentrations of oxygen and glucose are low, similar to hypoxic regions found in tumors. To test this hypothesis we used fluorescence microscopy and the tumor cylindroid model to quantify cellular viability in three-dimensional tissue. Isotope labeling and metabolic flux analysis were also used to quantity the intracellular metabolism of wild-type and HIF-1alpha-null spheroids. As hypothesized, cell survival and intracellular metabolism were not different between wild-type and HIF-1alpha-null tissues. In addition, small spheroids, which contain less quiescent cells and are less nutritionally limited, were found to have increased carbon flux through the biosynthetic pentose phosphate and pyruvate carboxylase pathways. These results show how nutrient gradients affect cell growth and metabolism in spheroids and suggest that metabolic microenvironment should be taken into account when developing HIF-1alpha-based therapies.

Generation of multicellular tumor spheroids by the hanging-drop method

Owing to their in vivo-like characteristics, three-dimensional (3D) multicellular tumor spheroid (MCTS) cultures are gaining increasing popularity as an in vitro model of tumors. A straightforward and simple approach to the cultivation of these MCTS is the hanging-drop method. Cells are suspended in droplets of medium, where they develop into coherent 3D aggregates and are readily accessed for analysis. In addition to being simple, the method eliminates surface interactions with an underlying substratum (e.g., polystyrene plastic or agarose), requires only a low number of starting cells, and is highly reproducible. This method has also been applied to the co-cultivation of mixed cell populations, including the co-cultivation of endothelial cells and tumor cells as a model of early tumor angiogenesis.

Rapid generation of single-tumor spheroids for high-throughput cell function and toxicity analysis

Spheroids are widely used in biology because they provide an in vitro 3-dimensional (3D) model to study proliferation, cell death, differentiation, and metabolism of cells in tumors and the response of tumors to radiotherapy and chemotherapy. The methods of generating spheroids are limited by size heterogeneity, long cultivation time, or mechanical accessibility for higher throughput fashion. The authors present a rapid method to generate single spheroids in suspension culture in individual wells. A defined number of cells ranging from 1000 to 20,000 were seeded into wells of poly-HEMA-coated, 96-well, round-or conical-bottom plates in standard medium and centrifuged for 10 min at 1000 g. This procedure generates single spheroids in each well within a 24-h culture time with homogeneous sizes, morphologies, and stratification of proliferating cells in the rim and dying cells in the core region. Because a large number of tumor cell lines form only loose aggregates when cultured in 3D, the authors also performed a screen for medium additives to achieve a switch from aggregate to spheroid morphology. Small quantities of the basement membrane extract Matrigel, added to the culture medium prior to centrifugation, most effectively induced compact spheroid formation. The compact spheroid morphology is evident as early as 24 h after centrifugation in a true suspension culture. Twenty tumor cell lines of different lineages have been used to successfully generate compact, single spheroids with homogenous size in 96-well plates and are easily accessible for subsequent functional analysis.

Salmonella typhimurium specifically chemotax and proliferate in heterogeneous tumor tissue in vitro

Multi-drug resistance greatly limits the efficacy of conventional blood-born chemotherapeutics, which have limited ability to penetrate tumor tissue and are ineffective at killing quiescent cells far from tumor vasculature. Nonpathogenic, motile bacteria can overcome both of theses limitations. We hypothesize that the accumulation of S. typhimurium in tumors is controlled by two mechanisms: (1) chemotaxis towards compounds produced by quiescent cancer cells and (2) preferential growth within tumor tissue. We tested this hypothesis by quantifying the relative contributions of these mechanisms using the tumor cylindroid model, which mimics the microenvironments of in vivo tumors. Time-lapse fluorescence microscopy was used to measure the accumulation of GFP-labeled S. typhimurium into cylindroids of different size. Cylindroids larger than 500 microm in diameter contain quiescent cells, whereas cylindroids smaller than 500 microm do not. Spatio-temporal profiles of bacterial concentration were fit to a mathematical model to calculate two parameters that describe bacterial interaction with tumors: intratumoral bacterial growth, M, and intratumoral bacterial chemoattraction, K. It was observed that S. typhimurium is attracted to cylindroids and accumulate at long time points in the central region of large cylindroids. Both intratumoral bacterial growth and chemotaxis were significantly greater in large cylindroids, suggesting that quiescent cells secrete bacterial chemoattractants and the presence of necrotic and quiescent cells enable S. typhimurium to replicate in tumor tissue. In this study, several mechanisms of S. typhimurium accumulation in solid tumors have been quantified, which we believe is an important step in the development of bacterial-based therapeutics to target tumor quiescence.

Tissue electroporation: quantification and analysis of heterogeneous transport in multicellular environments

Although electroporation is gaining increased attention as a technology to enhance clinical chemotherapy and gene therapy of tissues, direct measurements of electroporation-mediated transport in multicellular environments are lacking. In this study, we used multicellular tumor spheroids of DU145 prostate cancer cells as a model tissue to measure the levels and distribution of molecular uptake in a multicellular environment as a function of electrical and other parameters. These measurements, and subsequent analysis, were used to test the hypothesis that cells in a multicellular environment respond to electroporation in a heterogeneous manner that differs from isolated cells in suspension due to differences in cell state, local solute concentration, and local electric field. In support of the hypothesis, molecular uptake was consistently lower for cells within spheroids than cells in dilute suspension and was spatially heterogeneous, with progressively less uptake observed for cells located deeper within spheroid interiors. Reduced uptake and heterogeneity can be explained quantitatively by accounting for the effects of cell size on transmembrane voltage and cell volume, limited extracellular solute reservoir, heterogeneous field strength due to influence of neighboring cells, and diffusional lag times.