Identification of RAPD markers linked to a black leaf spot resistance gene in Chinese elm

Molecular mapping of a thermosensitive genetic male sterility gene in rice using bulked segregant analysis

The thermosensitive genetic male sterility (TGMS) system is considered to be a more efficient alternative to the cytoplasmic male sterility (CMS) system for hybrid rice. An F2 population from a cross between a TGMS mutant line (IR32364TGMS) and IR68 was used to map the TGMS gene tms3(t). Fertile and sterile bulks were constructed following the classification of F2 plants into true breeding sterile, fertile, and segregating fertile plants based on F3 family studies. From the survey of 389 arbitrary primers in bulked segregant analysis, four RAPD markers were identified in which three, OPF182600, OPB19750, and OPAA7550, were linked to tms3(t) in repulsion phase and one, OPAC3640, was linked to tms3(t) in coupling phase. The tms3(t) gene was flanked by OPF182600 and OPAC3640 on one side and by OPAA7550 and OPB19750 on the other side. All four markers were low-copy sequences and two of them (OPF182600 and OPAC3640) detected polymorphism when the markers were used to probe the genomic blots. Subsequently, OPAC3640 was mapped to the short arm of chromosome 6 using a mapping population available at IRRI. However, no RFLP markers from this region showed linkage to tms3(t) owing to the lack of polymorphism between the parents. All RAPD fragments were cloned and partially sequenced from both ends. Thus, PCR primers can be designed to develop PCR markers for marker-assisted breeding to facilitate the transfer of tms3(t) from one genetic background to another.

Genetic diversity and relationships among Dutch elm disease tolerant Ulmus pumila L. accessions from China

Elm breeding programs worldwide have relied heavily on Asian elm germplasm, particularly Ulmus pumila, for the breeding of Dutch elm disease tolerant cultivars. However, the extent and patterning of genetic variation in Asian elm species is unknown. Therefore, the objective of this research was to determine the extent of genetic diversity among 53 U. pumila accessions collected throughout the People's Republic of China. Using 23 microsatellite loci recently developed in the genus Ulmus, a total of 94 alleles were identified in 15 polymorphic and 4 monomorphic loci. The average number of alleles per locus was 4.9, with a range of 1-11 alleles. Gene diversity estimates per locus ranged from 0.08 to 0.87, and the non-exclusion probability for the 15 polymorphic loci combined was 0.7 x 10(-9). Nineteen region-specific alleles were identified, and regional gene diversity estimates were moderately high (0.48-0.57). The genetic relationships among accessions and regions were estimated by UPGMA and principal coordinate analysis. Both techniques discriminated all accessions and regions. Two microsatellite markers (UR175 + UR123 or Ulm-3) were sufficient to discriminate up to 99.7% of the accessions studied. This research provides useful information for DNA-based fingerprinting, breeding, ecological studies, and diversity assessment of elm germplasm.

Identification and Characterization of Random Amplified Polymorphic DNA Markers Linked to a Major Gene (Cr2) for Resistance to Cronartium ribicola in Pinus monticola

ABSTRACT DNA markers tightly linked to resistance (R) genes provide a very powerful tool for both marker-assisted selection in plant breeding and positional cloning of R genes. In the present study, a linkage of random amplified polymorphic DNA (RAPD) markers to the single dominant gene (Cr2) for resistance to white pine blister rust fungus (Cronartium ribicola) was investigated in western white pine (Pinus monticola). A mapping population of 128 individual megagametophytes was generated from seeds of a heterozygous resistant tree (Cr2/cr2), and the corresponding seedlings of each megagametophyte were subjected to the test of phenotype segregation by inoculation with C. ribicola. Bulked segregant analysis and haploid segregation analysis identified eight robust RAPD markers linked to Cr2. This constitutes the first Cr2 genetic linkage map spanning 84.7 cM with four markers only 3.2 cM from Cr2. One sequence (U256-1385) of these linked markers was significantly similar to the Ty3/gypsy-like long terminal direct repeats retrotransposons. Another marker, U570-843, had no significant similarity to any entry in either GenBank or the loblolly genomics data bank. As presumed that the average physical distance per centimorgan is about 10 Mb in P. monticola, it is probably unrealistic to use these DNA markers for positional cloning of the Cr2 gene.

Identification of AFLP markers linked to a resistance gene against pine needle gall midge in Japanese black pine

Bulked segregant and AFLP analyses of two mapping populations (R17 x S6 and R17 x S1) were used to identify markers linked to Rpgm, the only known gene responsible for resistance to pine needle gall midge in Pinus thunbergii Parl. Rpgm was found to be bracketed by ACCC/CCTTT(190) on one side at a distance of 6.6 cM and ACGT/CCCGC(250) at 15.3 cM on the other side. The segregation of these markers was analyzed in two other families in order to determine their phase and transferability. One of the two additional resistant parents carried ACCC/CCTTT(190) in the homozygous state while the marker was in coupling (plus marker allele linked with an R allele) in a resistant parent, R17. The marker ACGT/CCCGC(250) was in a repulsion phase in R17 and was not detected in the other two resistant pine trees. Out of four AFLP markers identified, only ACGT/CCAAT(290) was transferable in all resistant trees tested, although its phase was opposite for different trees. These results indicate that in applying those markers to select resistant trees, the phase state of the markers in each resistant tree with respect to Rpgm needs to be considered.

Resistance to rust ( Puccinia psidii Winter) in eucalyptus: mode of inheritance and mapping of a major gene with RAPD markers

Rust is one of the most-damaging eucalypt diseases in Brazil and is considered a potential threat to eucalypt plantations worldwide. To determine the mode of inheritance of resistance in the Eucalyptus grandis- Puccinia psidii pathosystem, ten full-sib families, generated from crosses between susceptible and resistant trees, were inoculated with a single-pustule isolate of the pathogen and rust severity was scored. The observed segregation ratios in segregating families suggested major gene control of rust resistance, although clearly incomplete penetrance, variable expressivity and minor genes are also involved in the global rust-resistance response. To identify markers linked to the resistance locus, screening of RAPD polymorphisms was conducted using bulked segregant analysis in a large full-sib family. A linkage group was built around the Ppr1 gene ( P. psidii resistance gene 1) encompassing six RAPD markers, with a genetic window spanning 5 cM with the two most-closely linked flanking markers. Besides these two flanking markers, RAPD marker AT9/917 co-segregated with Ppr1 without a single recombinant in 994 meioses. This tightly linked marker should prove useful for marker-assisted introgression and will provide an initial lead for a positional cloning effort of this resistance allele. This is the first report of a disease resistance gene identified in Eucalyptus, and one of the few examples of the involvement of a major gene in a non-coevolved pathosystem.

Forest tree biotechnology

The forest products industry has traditionally viewed trees as merely a raw, and more or less immutable, natural resource. However, unlike such inanimate resources as metallic ores, trees have the potential to be modified genetically, essentially transmuting lead into gold. Increasingly, modern alchemists are applying the tools of biotechnology in efforts to reduce the biological constraints on forest productivity. Several new methodologies being used to address problems in forest biology are described with respect to their potential impact on forest tree improvement. In addition to addressing problems inherent to the current use of trees for production of pulp and paper or solid wood products, genetic manipulation of trees brings with it the potential to create new industries based on the novel characteristics of transgenic trees, e.g. trees containing transgenes to detoxify specific pollutants could be used in the remediation of sites contaminated with hazardous wastes. Efforts to modify trees through biotechnology are in their infancy, and this review seeks to outline the underpinnings of what will undoubtedly be an area of increased emphasis in the next millennium.