Sequencing and expression of a cellodextrinase (ced1) gene from Butyrivibrio fibrisolvens H17c cloned in Escherichia coli

Characteristics of rumen microorganisms involved in anaerobic degradation of cellulose at various pH values

Microbial degradation of straw, the main by-product of agricultural production, has proved to be the most economical and effective means of producing hydrogen.

Genomics of cellulolytic bacteria

The heterogeneous plant biomass is efficiently decomposed by the interplay of a great number of different enzymes. The enzyme systems in cellulolytic bacteria have been investigated by sequencing and bioinformatic analysis of genomes from plant biomass degrading microorganisms with valuable insights into the variety of the involved enzymes. This broadened our understanding of the biochemical mechanisms of plant polymer degradation and made the enzymes applicable for modern biotechnology. A list of the truly cellulolytic bacteria described and the available genomic information was examined for proteins with cellulolytic and hemicellulolytic capability. The importance of the isolation, characterization and genomic sequencing of cellulolytic microorganisms and their usage for sustainable energy production from biomass and other residues, is emphasized.

Molecular cloning and transcriptional and expression analysis of engO, encoding a new noncellulosomal family 9 enzyme, from Clostridium cellulovorans

Clostridium cellulovorans produces a major noncellulosomal family 9 endoglucanase EngO. A genomic DNA fragment (40 kb) containing engO and neighboring genes was cloned. The nucleotide sequence contained reading frames for endoglucanase EngO, a putative response regulator, and a putative sensor histidine kinase protein. The engO gene consists of 2,172 bp and encodes a protein of 724 amino acids with a molecular weight of 79,474. Northern hybridizations revealed that the engO gene is transcribed as a monocistronic 2.6-kb mRNA. 5' RNA ligase-mediated rapid amplification of cDNA ends (RLM-RACE) PCR analysis indicated that the single transcriptional start site of engO was located 264 bp upstream from the first nucleotide of the translation initiation codon. Alignment of the engO promoter region provided evidence for highly conserved sequences that exhibited strong similarity to the sigma(A) consensus promoter sequences of gram-positive bacteria. EngO contains a typical N-terminal signal peptide of 28 amino acid residues, followed by a 149-amino-acid sequence which is homologous to the family 4-9 carbohydrate-binding domain. Downstream of this domain was an immunoglobulin-like domain of 89 amino acids. The C terminus contains a family 9 catalytic domain of glycosyl hydrolase. Mass spectrometry analysis of EngO was in agreement with that deduced from the nucleotide sequence. Expression of engO mRNA increased from early to middle exponential phase and decreased during the early stationary phase. EngO was highly active toward carboxymethyl cellulose but showed no activity towards xylan. It was optimally active at 40 to 50 degrees C and pH 5 to 6. The analysis of the products from the cellulose hydrolysis through thin-layer chromatography indicated its endoglucanase activity.

Opportunities to improve fiber degradation in the rumen: microbiology, ecology, and genomics

The degradation of plant cell walls by ruminants is of major economic importance in the developed as well as developing world. Rumen fermentation is unique in that efficient plant cell wall degradation relies on the cooperation between microorganisms that produce fibrolytic enzymes and the host animal that provides an anaerobic fermentation chamber. Increasing the efficiency with which the rumen microbiota degrades fiber has been the subject of extensive research for at least the last 100 years. Fiber digestion in the rumen is not optimal, as is supported by the fact that fiber recovered from feces is fermentable. This view is confirmed by the knowledge that mechanical and chemical pretreatments improve fiber degradation, as well as more recent research, which has demonstrated increased fiber digestion by rumen microorganisms when plant lignin composition is modified by genetic manipulation. Rumen microbiologists have sought to improve fiber digestion by genetic and ecological manipulation of rumen fermentation. This has been difficult and a number of constraints have limited progress, including: (a) a lack of reliable transformation systems for major fibrolytic rumen bacteria, (b) a poor understanding of ecological factors that govern persistence of fibrolytic bacteria and fungi in the rumen, (c) a poor understanding of which glycolyl hydrolases need to be manipulated, and (d) a lack of knowledge of the functional genomic framework within which fiber degradation operates. In this review the major fibrolytic organisms are briefly discussed. A more extensive discussion of the enzymes involved in fiber degradation is included. We also discuss the use of plant genetic manipulation, application of free-living lignolytic fungi and the use of exogenous enzymes. Lastly, we will discuss how newer technologies such as genomic and metagenomic approaches can be used to improve our knowledge of the functional genomic framework of plant cell wall degradation in the rumen.

Cloning and sequencing of beta-1,4-endoglucanase gene (celA) from Pseudomonas sp. YD-15

A beta-1,4-endoglucanase gene (celA) from Pseudomonas sp. YD-15 was cloned in Escherichia coli DH5 alpha and its nucleotide sequence determined. The open reading frame of celA was 1830 base pairs and the enzyme was composed of 609 amino acids with a molecular weight of 63,617 Da. The deduced amino acid sequence and putative active site of CelA had high amino acid homology with family E cellulases. By dot blot analysis, the induction of celA according to carbon sources was determined. The transcripts hybridizing to the internal fragment of celA were detected in total RNA isolated from Pseudomonas sp. YD-15 cells grown on avicel and glycerol, but not from cells grown on glucose and cellobiose.

Cloning and sequence analysis of a new cellulase gene encoding CelK, a major cellulosome component of Clostridium thermocellum: evidence for gene duplication and recombination

The cellulolytic and hemicellulolytic complex of Clostridium thermocellum, termed cellulosome, consists of up to 26 polypeptides, of which at least 17 have been sequenced. They include 12 cellulases, 3 xylanases, 1 lichenase, and CipA, a scaffolding polypeptide. We report here a new cellulase gene, celK, coding for CelK, a 98-kDa major component of the cellulosome. The gene has an open reading frame (ORF) of 2,685 nucleotides coding for a polypeptide of 895 amino acid residues with a calculated mass of 100,552 Da. A signal peptide of 27 amino acid residues is cut off during secretion, resulting in a mature enzyme of 97,572 Da. The nucleotide sequence is highly similar to that of cbhA (V. V. Zverlov et al., J. Bacteriol. 180:3091-3099, 1998), having an ORF of 3,690 bp coding for the 1,230-amino-acid-residue CbhA of the same bacterium. Homologous regions of the two genes are 86.5 and 84.3% identical without deletion or insertion on the nucleotide and amino acid levels, respectively. Both have domain structures consisting of a signal peptide, a family IV cellulose binding domain (CBD), a family 9 glycosyl hydrolase domain, and a dockerin domain. A striking distinction between the two polypeptides is that there is a 330-amino-acid insertion in CbhA between the catalytic domain and the dockerin domain containing a fibronectin type 3-like domain and family III CBD. This insertion, missing in CelK, is responsible for the size difference between CelK and CbhA. Upstream and downstream flanking sequences of the two genes show no homology. The data indicate that celK and cbhA in the genome of C. thermocellum have evolved through gene duplication and recombination of domain coding sequences. celK without a dockerin domain was expressed in Escherichia coli and purified. The enzyme had pH and temperature optima at 6.0 and 65 degrees C, respectively. It hydrolyzed p-nitrophenyl-beta-D-cellobioside with a Km and a Vmax of 1.67 microM and 15.1 U/mg, respectively. Cellobiose was a strong inhibitor of CelK activity, with a Ki of 0.29 mM. The enzyme was thermostable, after 200 h of incubation at 60 degrees C, 97% of the original activity remained. Properties of the enzyme indicated that it is a cellobiohydrolase.

Distribution and evolution of the xylanase genes xynA and xynB and their homologues in strains of Butyrivibrio fibrisolvens

The ruminal bacterium Butyrivibrio fibrisolvens is being engineered by the introduction of heterologous xylanase genes in an attempt to improve the utilization of plant material in ruminants. However, relatively little is known about the diversity and distribution of the native xylanase genes in strains of B. fibrisolvens. In order to identify the most appropriate hosts for such modifications, the xylanase genotypes of 28 strains from the three 16S ribosomal DNA (rDNA) subgroups of Butyrivibrio fibrisolvens have been investigated. Only 4 of the 20 strains from 16S rDNA group 2 contained homologues of the strain Bu49 xynA gene. However, these four xynA-containing strains, and two other group 2 strains, contained members of a second xylanase gene family clearly related to xynA (subfamily I). Homologues of xynB, a second previously described xylanase gene from B. fibrisolvens, were identified only in three of the seven group 1 strains and not in the group 2 and 3 strains. However, six of the group 1 strains contained one or more members of the two subfamilies of homologues of xynA. The distribution of genes and the nucleotide sequence relationships between the members of the two xynA subfamilies are consistent with the progenitor of all strains of B. fibrisolvens having contained a xynA subfamily I gene. Since many xylanolytic strains of B. fibrisolvens did not contain members of either of the xynA subfamilies or of the xynB family, at least one additional xylanase gene family remains to be identified in B. fibrisolvens.

Multidomain structure and cellulosomal localization of the Clostridium thermocellum cellobiohydrolase CbhA

The nucleotide sequence of the Clostridium thermocellum F7 cbhA gene, coding for the cellobiohydrolase CbhA, has been determined. An open reading frame encoding a protein of 1,230 amino acids was identified. Removal of a putative signal peptide yields a mature protein of 1,203 amino acids with a molecular weight of 135,139. Sequence analysis of CbhA reveals a multidomain structure of unusual complexity consisting of an N-terminal cellulose binding domain (CBD) homologous to CBD family IV, an immunoglobulin-like beta-barrel domain, a catalytic domain homologous to cellulase family E1, a duplicated domain similar to fibronectin type III (Fn3) modules, a CBD homologous to family III, a highly acidic linker region, and a C-terminal dockerin domain. The cellulosomal localization of CbhA was confirmed by Western blot analysis employing polyclonal antibodies raised against a truncated enzymatically active version of CbhA. CbhA was identified as cellulosomal subunit S3 by partial amino acid sequence analysis. Comparison of the multidomain structures indicates striking similarities between CbhA and a group of cellulases from actinomycetes. Average linkage cluster analysis suggests a coevolution of the N-terminal CBD and the catalytic domain and its spread by horizontal gene transfer among gram-positive cellulolytic bacteria.

A chitin-binding domain in a marine bacterial chitinase and other microbial chitinases: implications for the ecology and evolution of 1,4-beta-glycanases

To examine the ecology and evolution of microbial chitinases, especially the chitin-binding domain, one of the chitinase genes (chiA) from the marine bacterium Vibrio harveyi was analysed. The deduced amino acid sequence of ChiA is not very similar overall to other proteins, except for two regions, the putative catalytic and chitin-binding domains. Among all bacterial chitinases sequenced to date, there is no relationship between percentage similarity of catalytic domains and chitin-binding domains in pairwise comparisons, suggesting that these two domains have evolved separately. The chitin-binding domain appears to be evolutionarily conserved among many bacterial chitinases and is also somewhat similar to cellulose-binding domains found in microbial cellulases and xylanases. To investigate the role of the chitin-binding domain, clones producing versions of ChiA with or without this domain were examined. One version with the domain (ChiA1) bound to and hydrolysed chitin, whereas a truncated ChiA without the putative chitin-binding domain (ChiA2) did not bind to chitin, but it could hydrolyse chitin, although not as well. ChiA1 diffused more slowly in agarose containing colloidal chitin than ChiA2, but diffusion of the two proteins in agarose without colloidal chitin was similar. These results indicate that the chitin-binding domain helps determine the movement of chitinase along N-acetylglucosamine strands and within environments containing chitin.

Cloning, DNA sequencing, and expression of the gene encoding Clostridium thermocellum cellulase CelJ, the largest catalytic component of the cellulosome

The Clostridium thermocellum F1 celJ gene, encoding endoglucanase J (CelJ), consists of an open reading frame (ORF) of 4,803 nucleotides and encodes a protein of 1,601 amino acids with a molecular weight of 178,055. The ORF was confirmed as celJ by comparison with the N-terminal sequence of a truncated CelJ derivative. CelJ is a modular enzyme composed of N-terminal signal peptide and six domains in the following order: an S-layer homology domain, a domain of unknown function (UD-1), a subfamily E1 endoglucanase domain, a family J endoglucanase domain, a docking domain, and another domain of unknown function (UD-2). UD-1 has no significant similarity to UD-2. CelJ hydrolyzed carboxymethylcellulose and xylan, and xylanase activity was ascribed to the family J domain. Antiserum raised against the truncated CelJ cross-reacted with proteins contained in the cellulosome of C. thermocellum F1. These results strongly suggest that CelJ is equivalent to S2, which was identified as the largest catalytic component in the cellulosome of C. thermocellum YS. A second but incomplete ORF encoding an enzyme classified in subfamily E2 endoglucanase, was located downstream of celJ.

Microbial hydrolysis of polysaccharides

Microorganisms are efficient degraders of starch, chitin, and the polysaccharides in plant cell walls. Attempts to purify hydrolases led to the realization that a microorganism may produce a multiplicity of enzymes, referred to as a system, for the efficient utilization of a polysaccharide. In order to fully characterize a particular enzyme, it must be obtained free of the other components of a system. Quite often, this proves to be very difficult because of the complexity of a system. This realization led to the cloning of the genes encoding them as an approach to eliminating other components. More than 400 such genes have been cloned and sequenced, and the enzymes they encode have been grouped into more than 50 families of related amino acid sequences. The enzyme systems revealed in this manner are complex on two quite different levels. First, many of the individual enzymes are complex, as they are modular proteins comprising one or more catalytic domains linked to ancillary domains that often include one or more substrate-binding domains. Second, the systems are complex, comprising from a few to 20 or more enzymes, all of which hydrolyze a particular substrate. Systems for the hydrolysis of plant cell walls usually contain more components than systems for the hydrolysis of starch and chitin because the cell walls contain several polysaccharides. In general, the systems produced by different microorganisms for the hydrolysis of a particular polysaccharide comprise similar enzymes from the same families.

The cellulolytic system of Streptomyces reticuli

The bacterium Streptomyces reticuli produces an unusual mycelia-associated cellulase (Avicelase, Cel1) which is solely sufficient to degrade crystalline cellulose to cellobiose. The enzyme consists of a binding domain, one adjoining region with unknown function, and a catalytic domain belonging to the cellulase family E. During cultivation, the strain produces a specific protease which processes the Avicelase to a truncated enzyme lacking the binding domain. The cellulase synthesis is regulated by induction (Avicel) and repression (metabolizable sugars and glycerol).

The gene encoding the cellulase (Avicelase) Cel1 from Streptomyces reticuli and analysis of protein domains

Streptomyces reticuli produces an unusual cellulase (Avicelase), with an apparent molecular weight of 82 kDa, which is solely sufficient to degrade crystalline cellulose. During cultivation the processing of the Avicelase to a truncated enzyme (42 kDa) and an inactive protein (40 kDa) correlated with the occurrence of an extracellular protease. After its purification this 36 kDa protease cleaved the S. reticuli Avicelase in vitro in the same manner. Using antibodies raised against the Avicelase and its truncated form (42 kDa) and gene libraries of S. reticuli DNA in the Escherichia coli phage vectors lambda gt11 and Charon 35, the Avicelase gene (cel1) was identified. Further subcloning and DNA-sequencing revealed a G+C rich (72%) reading frame of 2238 bp encoding a protein of 746 amino acids. The transcriptional start site was mapped about 180 bp upstream from the GTG start codon. A signal sequence of 29 amino acids was identified by aligning the deduced amino acids with the characterized N-terminus of the 82 kDa Avicelase. Comparison of the N-terminal amino acids from the purified proteins with the amino acid sequence derived from the Avicelase gene revealed that the truncated enzyme (42 kDa) corresponds to the C-terminal region whereas the inactive proteolytically derived protein (40 kDa) represents the N-terminal part of the 82 kDa Avicelase. Comparisons with amino acid sequences deduced from known cellulase genes indicated the presence of three putative protein domains: (i) an N-terminal part showing significant similarity with a repeat region of endoglucanase C from Cellulomonas fimi, recently shown to be a cellulose-binding domain; (ii) an adjoining region sharing homology with the N-terminal domains with unknown function of endoglucanase A from Pseudomonas fluorescens, endoglucanase D from Clostridium thermocellum and a cellodextrinase from Butyrivibrio fibrisolvens, and (iii) a C-terminal catalytic domain belonging to cellulase family E.

Sequence analysis of a gene cluster encoding cellulases from Clostridium cellulolyticum

The sequence of a 5633-bp EcoRI-PvuII DNA fragment from Clostridium cellulolyticum was determined. This fragment contains two complete endo-beta-1,4-glucanase-encoding genes, designated celCCC and celCCG. These two genes are flanked by two other partial open reading frames (ORF1 and celCCE) that probably encode two cellulases or related enzymes. The celCCC and celCCG genes appear to be present in a polycistronic transcriptional unit. Northern blot hybridisations with intragenic probes derived from celCCC and celCCG gave similar patterns. Two transcripts of about 5 and 6 kb were identified. The celCCC and celCCG ORFs extend over 1380 bp and 2175 bp, respectively. They are separated by only 87 nt. A typical signal sequence is present at the N terminus of the deduced polypeptides. The mature CelCCC and CelCCG proteins have M(r)s 47,201 and 76,101, respectively. Comparisons between their amino acid (aa) sequences and other known cellulase sequences revealed that: first, they both contain the repeated 24-aa sequence characteristic of clostridial beta-glycanases, secondly, the N-terminal catalytic domains of CelCCC and CelCCG can be classified into the D and E2 families, respectively, and thirdly, the largest CelCCG contains an additional internal domain which is very similar to that of the Bacillus-type cellulose-binding domain (CBD). The ORF1-C-terminal-encoded sequence also contains the clostridial 24-aa repeat. The CelCCE N-terminus consists of a typical signal sequence followed by a 168-aa domain homologous to the N-terminal repeated domain of Cellulomonas fimi CenC. This domain is connected to an incomplete catalytic domain of family E1 by a Pro-rich junction linker.

Modification of catalytically important carboxy residues in endoglucanase D from Clostridium thermocellum

Endoglucanase D (EC 3.2.1.4; EGD) from Clostridium thermocellum is rapidly (k = 216 M-1.min-1) and almost completely (greater than 95%) inactivated with Woodward's reagent K (N-ethyl-5-phenylisoxazolium-3'-sulphonate). Spectrophotometric analysis at 340 nm reveals that eight carboxy residues react, whereas specific ligands protect one residue against modification. The enzyme retains it full activity under the latter conditions. The kinetics and pH-dependence of inactivation point towards the involvement of one or more essential carboxy groups with a pKa of 5.7-5.8. Samples modified in the absence or presence of ligand were analysed by reversed-phase liquid chromatography after proteolysis with subtilisin. Dual-wavelength monitoring at 214 and 340 nm during this fractionation leads to the identification of a putatively active-site peptide (Gly-508-Ala-562) which was further characterized by amino acid and partial N-terminal sequence analyses. Asp-546 and Glu-555 are postulated as possible active-site residues. This follows from alignments using ten endoglucanase sequences belonging to the same family. Strong local conservation suggests that this C-terminal sequence is structurally and/or functionally important.

DNA sequence and transcription of an endoglucanase gene from Prevotella (Bacteroides) ruminicola AR20

The endoglucanase gene was sequenced from Prevotella ruminicola AR20, isolated as clone pJW4. The endoglucanase (BrEND) is encoded by an open reading frame (ORF1) of 501 codons, corresponding to a protein of calculated molecular weight 55.7 kDa. Analysis of proteins on SDS-PAGE revealed a protein corresponding to the calculated molecular weight of the processed BrEND. The protein showed substantial homology to members of the A4 sub-family cellulases. Primer extension studies revealed that transcription of celA is initiated at different sites in Escherichia coli and Prevotella ruminicola. E. coli sigma 70 recognition sequences were identified, which were located upstream from the transcription initiation site (TIS) functional in E. coli. A longer extension product was identified using RNA from P. ruminicola, indicating that the gene may normally be transcribed as part of a polycistronic message. The end of the primer extension product corresponded to a site beyond the 5' boundary of the cloned fragment, thus preventing identification of native promoter sequences. A second ORF of 110 codons (ORF2) was identified on the antisense strand, and primer extension indicated that transcription through ORF2 was initiated at an identical site in both E. coli and P. ruminicola. E. coli-like consensus sequences were located at positions -10 and -35 upstream from this site, suggesting that some promoter sequences in P. ruminicola are similar to E. coli consensus sequences, although others recognized by E. coli are non-functional in P. ruminicola.(ABSTRACT TRUNCATED AT 250 WORDS)

A classification of glycosyl hydrolases based on amino acid sequence similarities

The amino acid sequences of 301 glycosyl hydrolases and related enzymes have been compared. A total of 291 sequences corresponding to 39 EC entries could be classified into 35 families. Only ten sequences (less than 5% of the sample) could not be assigned to any family. With the sequences available for this analysis, 18 families were found to be monospecific (containing only one EC number) and 17 were found to be polyspecific (containing at least two EC numbers). Implications on the folding characteristics and mechanism of action of these enzymes and on the evolution of carbohydrate metabolism are discussed. With the steady increase in sequence and structural data, it is suggested that the enzyme classification system should perhaps be revised.

Nucleotide sequence of the cellulase gene celF of Clostridium thermocellum

The nucleotide sequence of the celF gene of Clostridium thermocellum was determined. The open reading frame extended over 2217 bp. The encoded 739-aa polypeptide, CelF, with a Mw = 82,015, was an endoglucanase with activity against carboxymethylcellulose. The N terminus showed a typical signal peptide, and a cleavage site after Ala-27 was predicted. From residues 28 to 470, the sequence of CelF was related to the catalytic domains of type E2 endoglucanases, with a strong homology to the endoglucanases CelZ of Clostridium stercorarium and CenB of Cellulomonas fimi. The catalytic region was followed by a 134-aa segment also present in C. stercorarium CelZ and in C. fimi CenB, and belonging to the family of non-catalytic, presumably cellulose-binding domains first identified in Bacillus subtilis endoglucanase. A 21-aa segment rich in Pro/Thr/Ser residues separated the putative cellulose-binding region from the COOH-terminal region, which contained two conserved stretches of 24 amino acids closely similar to those previously described in endoglucanases CelA, CelB, CelD, CelE, CelH and CelX, and xylanase XynZ of C. thermocellum.

Cloning, sequencing and expression of a gene encoding a 73 kDa xylanase enzyme from the rumen anaerobe Butyrivibrio fibrisolvens H17c

The cloning, expression and nucleotide sequence of a 3 kb DNA segment on pLS206 containing a xylanase gene (xynB) from Butyrivibrio fibrisolvens H17c was investigated. The open reading frame (ORF) of 1905 bp encoded a xylanase of 635 amino acid residues (Mr 73156). At least 850 bp at the 3' end of the gene could be deleted without loss of xylanase activity. The deduced amino acid sequence was confirmed by purifying the enzyme and subjecting it to N-terminal amino acid sequence analysis. In Escherichia coli C600 (pLS206) cells the xylanase was localized in the cytoplasm. Its optimum pH for activity was between pH 5.4 and 6, and optimum temperature 55 degrees C. The primary structure of the xylanase showed a significant level of identity with a cellobiohydrolase/endoglucanase of Caldocellum saccharolyticum, as well as with the xylanases of the alkaliphilic Bacillus sp. strain C-125, B. fibrisolvens strain 49, and Pseudomonas fluorescens subsp. cellulosa.

Domains in microbial beta-1, 4-glycanases: sequence conservation, function, and enzyme families

Several types of domain occur in beta-1, 4-glycanases. The best characterized of these are the catalytic domains and the cellulose-binding domains. The domains may be joined by linker sequences rich in proline or hydroxyamino acids or both. Some of the enzymes contain repeated sequences up to 150 amino acids in length. The enzymes can be grouped into families on the basis of sequence similarities between the catalytic domains. There are sequence similarities between the cellulose-binding domains, of which two types have been identified, and also between some domains of unknown function. The beta-1, 4-glycanases appear to have arisen by the shuffling of a relatively small number of progenitor sequences.