Cloning and expression of the genes for xylose isomerase and xylulokinase from Klebsiella pneumoniae 1033 in Escherichia coli K12

D-xylose isomerase from a marine bacterium, Vibrio sp. strain XY-214, and D-xylulose production from β-1,3-xylan

The xylA gene from a marine bacterium, Vibrio sp. strain XY-214, encoding D-xylose isomerase (XylA) was cloned and expressed in Escherichia coli. The xylA gene consisted of 1,320-bp nucleotides encoding a protein of 439 amino acids with a predicted molecular weight of 49,264. XylA was classified into group II xylose isomerases. The native XylA was estimated to be a homotetramer with a molecular mass of 190 kDa. The purified recombinant XylA exhibited maximal activity at 60°C and pH 7.5. Its apparent K (m) values for D-xylose and D-glucose were 7.93 and 187 mM, respectively. Furthermore, we carried out D-xylulose production from β-1,3-xylan, a major cell wall polysaccharide component of the killer alga Caulerpa taxifolia. The synergistic action of β-1,3-xylanase (TxyA) and β-1,3-xylosidase (XloA) from Vibrio sp. strain XY-214 enabled efficient saccharification of β-1,3-xylan to D-xylose. D-xylose was then converted to D-xylulose by using XylA from the strain XY-214. The conversion rate of D-xylose to D-xylulose by XylA was found to be approximately 40% in the presence of 4 mM sodium tetraborate after 2 h of incubation. These results demonstrated that TxyA, XloA, and XylA from Vibrio sp. strain XY-214 are useful tools for D-xylulose production from β-1,3-xylan. Because D-xylulose can be used as a source for ethanol fermentation by yeast Saccharomyces cerevisiae, the present study will provide a basis for ethanol production from β-1,3-xylan.

Cloning and analysis of the xylAB operon and characterization of xylose isomerase from Thermoanaerobacter ethanolicus

Three genes, xylA-like, xylA and xylB, were cloned and sequenced from the chromosome of Thermoanaerobacter ethanolicus JW200. xylA and xylB share an operon and encode xylose isomerase and xylulokinase, respectively. The xylA-like gene locates upstream of xylAB operon and encodes a hypothetical protein that lacks xylose isomerase activity. The xylose isomerase was expressed in Escherichia coli and purified by heat treatment and an ion-exchange chromatography. The enzyme had highest activity at 85°C and pH 7.0, and a half-life for 1 h at 85°C. The K (m) and V (max) values for xylose were 11 mM and 25 U/mg, respectively. The high level of expression, easy purification, and thermostability of the XylA from T. ethanolicus JW200 suggests industrial usefulness.

Genetic engineering of Zymobacter palmae for production of ethanol from xylose

Its metabolic characteristics suggest that Zymobacter palmae gen. nov., sp. nov. could serve as a useful new ethanol-fermenting bacterium, but its biotechnological exploitation will require certain genetic modifications. We therefore engineered Z. palmae so as to broaden the range of its fermentable sugar substrates to include the pentose sugar xylose. The Escherichia coli genes encoding the xylose catabolic enzymes xylose isomerase, xylulokinase, transaldolase, and transketolase were introduced into Z. palmae, where their expression was driven by the Zymomonas mobilis glyceraldehyde-3-phosphate dehydrogenase promoter. When cultured with 40 g/liter xylose, the recombinant Z. palmae strain was able to ferment 16.4 g/liter xylose within 5 days, producing 91% of the theoretical yield of ethanol with no accumulation of organic acids as metabolic by-products. Notably, xylose acclimation enhanced both the expression of xylose catabolic enzymes and the rate of xylose uptake into recombinant Z. palmae, which enabled the acclimated organism to completely and simultaneously ferment a mixture of 40 g/liter glucose and 40 g/liter xylose within 8 h, producing 95% of the theoretical yield of ethanol. Thus, efficient fermentation of a mixture of glucose and xylose to ethanol can be accomplished by using Z. palmae expressing E. coli xylose catabolic enzymes.

Restoration of a defective Lactococcus lactis xylose isomerase

The genes (xylA) encoding xylose isomerase (XI) from two Lactococcus lactis subsp. lactis strains, 210 (Xyl(-)) and IO-1 (Xyl(+)), were cloned, and the activities of their expressed proteins in recombinant strains of Escherichia coli were investigated. The nucleotide and amino acid sequence homologies between the xylA genes were 98.4 and 98.6%, respectively, and only six amino acid residues differed between the two XIs. The purified IO-1 XI was soluble with K(m) and k(cat) being 2.25 mM and 184/s, respectively, while the 210 XI was insoluble and inactive. Site-directed mutagenesis on 210 xylA showed that a triple mutant possessing R202M/Y218D/V275A mutations regained XI activity and was soluble. The K(m) and k(cat) of this mutant were 4.15 mM and 141/s, respectively. One of the IO-1 XI mutants, S388T, was insoluble and showed negligible activity similar to that of 210 XI. The introduction of a K407E mutation to the IO-1 S388T XI mutant restored its activity and solubility. The dissolution of XI activity in L. lactis subsp. lactis involves a series of mutations that collectively eliminate enzyme activity by reducing the solubility of the enzyme.

Glucose isomerase: insights into protein engineering for increased thermostability

Thermostable glucose isomerases are desirable for production of 55% fructose syrups at >90 degrees C. Current commercial enzymes operate only at 60 degrees C to produce 45% fructose syrups. Protein engineering to construct more stable enzymes has so far been relatively unsuccessful, so this review focuses on elucidation of the thermal inactivation pathway as a future guide. The primary and tertiary structures of 11 Class 1 and 20 Class 2 enzymes are compared. Within each class the structures are almost identical and sequence differences are few. Structural differences between Class 1 and Class 2 are less than previously surmised. The thermostabilities of Class 1 enzymes are essentially identical, in contrast to previous reports, but in Class 2 they vary widely. In each class, thermal inactivation proceeds via the tetrameric apoenzyme, so metal ion affinity dominates thermostability. In Class 1 enzymes, subunit dissociation is not involved, but there is an irreversible conformational change in the apoenzyme leading to a more thermostable inactive tetramer. This may be linked to reversible conformational changes in the apoenzyme at alkaline pH arising from electrostatic repulsions in the active site, which break a buried Arg-30-Asp-299 salt bridge and bring Arg-30 to the surface. There is a different salt bridge in Class 2 enzymes, which might explain their varying thermostability. Previous protein engineering results are reviewed in light of these insights.

Cloning and characterization of transcription of the xylAB operon in Thermoanaerobacter ethanolicus

The genes encoding xylose isomerase (xylA) and xylulose kinase (xylB) from the thermophilic anaerobe Thermoanaerobacter ethanolicus were found to constitute an operon with the transcription initiation site 169 nucleotides upstream from the previously assigned (K. Dekker, H. Yamagata, K. Sakaguchi, and S. Udaka, Agric. Biol. Chem. 55:221-227, 1991) promoter region. The bicistronic xylAB mRNA was processed by cleavage within the 5'-terminal portion of the XylB-coding sequence. Transcription of xylAB was induced in the presence of xylose, and, unlike in all other xylose-utilizing bacteria studied, was not repressed by glucose. The existence of putative xyl operator sequences suggested that xylose utilization is controlled by a repressor-operator mechanism. The T. ethanolicus xylB gene coded for a 500-amino-acid-residue protein with a deduced amino acid sequence highly homologous to those of other XylBs. This is the first report of an xylB nucleotide sequence and an xyLAB operon from a thermophilic anaerobic bacterium.

Cloning and expression of the gene for xylose isomerase from Thermus flavus AT62 in Escherichia coli

The gene encoding xylose isomerase (xylA) was cloned from Thermus flavus AT62 and the DNA sequence was determined. The xylA gene encodes the enzyme xylose isomerase (XI or xylA) consisting of 387 amino acids (calculated Mr of 44,941). Also, there was a partial xylulose kinase gene that was 4 bp overlapped in the end of XI gene. The XI gene was stably expressed in E. coli under the control of tac promoter. XI produced in E. coli was simply purified by heat treatment at 90 degrees C for 10 min and column chromatography of DEAE-Sephacel. The Mr of the purified enzyme was estimated to be 45 kDa on SDS-polyacrylamide gel electrophoresis. However, Mr of the cloned XI was 185 kDa on native condition, indicating that the XI consists of homomeric tetramer. The enzyme has an optimum temperature at 90 degrees C. Thermostability tests revealed that half life at 85 degrees C was 2 mo and 2 h at 95 degrees C. The optimum pH is around 7.0, close to where by-product formation is minimal. The isomerization yield of the cloned XI was about 55% from glucose, indicating that the yield is higher than those of reported enzymes. The K(m) values for various sugar substrates were calculated as 106 mM for glucose. Divalent cations such as Mn2+, Co2+, and Mg2+ are required for the enzyme activity and 100 mM EDTA completely inhibited the enzyme activity.

Development of an arabinose-fermenting Zymomonas mobilis strain by metabolic pathway engineering

The substrate fermentation range of the ethanologenic bacterium Zymomonas mobilis was expanded to include the pentose sugar, L-arabinose, which is commonly found in agricultural residues and other lignocellulosic biomass. Five genes, encoding L-arabinose isomerase (araA), L-ribulokinase (araB), L-ribulose-5-phosphate-4-epimerase (araD), transaldolase (talB), and transketolase (tktA), were isolated from Escherichia coli and introduced into Z. mobilis under the control of constitutive promoters that permitted their expression even in the presence of glucose. The engineered strain grew on and produced ethanol from L-arabinose as a sole C source at 98% of the maximum theoretical ethanol yield, based on the amount of consumed sugar. This indicates that arabinose was metabolized almost exclusively to ethanol as the sole fermentation product, with little by-product formation. Although no diauxic growth pattern was evident, the microorganism preferentially utilized glucose before arabinose, apparently reflecting the specificity of the indigenous facilitated diffusion transport system. This microorganism may be useful, along with the previously developed xylose-fermenting Z. mobilis (M. Zhang, C. Eddy, K. Deanda, M. Finkelstein, and S. Picataggio, Science 267:240-243, 1995), in a mixed culture for efficient fermentation of the predominant hexose and pentose sugars in agricultural residues and other lignocellulosic feedstocks to ethanol.

Molecular and industrial aspects of glucose isomerase

Glucose isomerase (GI) (D-xylose ketol-isomerase; EC. 5.3.1.5) catalyzes the reversible isomerization of D-glucose and D-xylose to D-fructose and D-xylulose, respectively. The enzyme has the largest market in the food industry because of its application in the production of high-fructose corn syrup (HFCS). HFCS, an equilibrium mixture of glucose and fructose, is 1.3 times sweeter than sucrose and serves as a sweetener for use by diabetics. Interconversion of xylose to xylulose by GI serves a nutritional requirement in saprophytic bacteria and has a potential application in the bioconversion of hemicellulose to ethanol. The enzyme is widely distributed in prokaryotes. Intensive research efforts are directed toward improving its suitability for industrial application. Development of microbial strains capable of utilizing xylan-containing raw materials for growth or screening for constitutive mutants of GI is expected to lead to discontinuation of the use of xylose as an inducer for the production of the enzyme. Elimination of Co2+ from the fermentation medium is desirable for avoiding health problems arising from human consumption of HFCS. Immobilization of GI provides an efficient means for its easy recovery and reuse and lowers the cost of its use. X-ray crystallographic and genetic engineering studies support a hydride shift mechanism for the action of GI. Cloning of GI in homologous as well as heterologous hosts has been carried out, with the prime aim of overproducing the enzyme and deciphering the genetic organization of individual genes (xylA, xylB, and xylR) in the xyl operon of different microorganisms. The organization of xylA and xylB seems to be highly conserved in all bacteria. The two genes are transcribed from the same strand in Escherichia coli and Bacillus and Lactobacillus species, whereas they are transcribed divergently on different strands in Streptomyces species. A comparison of the xylA sequences from several bacterial sources revealed the presence of two signature sequences, VXW(GP)GREG(YSTAE)E and (LIVM)EPKPX(EQ)P. The use of an inexpensive inducer in the fermentation medium devoid of Co2+ and redesigning of a tailor-made GI with increased thermostability, higher affinity for glucose, and lower pH optimum will contribute significantly to the development of an economically feasible commercial process for enzymatic isomerization of glucose to fructose. Manipulation of the GI gene by site-directed mutagenesis holds promise that a GI suitable for biotechnological applications will be produced in the foreseeable future.

Probing the roles of active site residues in D-xylose isomerase

The roles of active site residues His54, Phe94, Lys183, and His220 in the Streptomyces rubiginosus D-xylose isomerase were probed by site-directed mutagenesis. The kinetic properties and crystal structures of the mutant enzymes were characterized. The pH dependence of diethylpyrocarbonate modification of His54 suggests that His54 does not catalyze ring-opening as a general acid. His54 appears to be involved in anomeric selection and stabilization of the acyclic transition state by hydrogen bonding. Phe94 stabilizes the acyclic-extended transition state directly by hydrophobic interactions and/or indirectly by interactions with Trp137 and Phe26. Lys183 and His220 mutants have little or no activity and the structures of these mutants with D-xylose reveal cyclic alpha-D-xylopyranose. Lys183 functions structurally by maintaining the position of Pro187 and Glu186 and catalytically by interacting with acyclic-extended sugars. His220 provides structure for the M2-metal binding site with properties which are necessary for extension and isomerization of the substrate. A second M2 metal binding site (M2') is observed at a relatively lower occupancy when substrate is added consistent with the hypothesis that the metal moves as the hydride is shifted on the extended substrate.

Identification of new members of a carbohydrate kinase-encoding gene family

In a sequence database search using the human glycerol kinase-encoding sequence (HUMGLYKINB) as a query, we identified six previously unidentified carbohydrate kinase sequences. Five of the six newly identified sequences appear to be known types of carbohydrate kinases, four are glycerol kinases and one is a gluconokinase. The sixth newly identified sequence, the Caenorhabditis elegans gene, CER08D7.7-CEF59B2.1, shows similarity to the family of carbohydrate kinases including other glycerol kinases, xylulokinases, gluconokinases, ribulokinases, rhamnulokinases, and fucokinases. A phylogenetic comparison of this newly identified Caenorhabditis elegans gene with the other members of the carbohydrate kinase family demonstrated that this sequence cannot be assigned to one of the known classes of carbohydrate kinases.

Production of polyhydroxyalkanoates in sucrose-utilizing recombinant Escherichia coli and Klebsiella strains

The cloned poly-3-hydroxybutyrate (PHB) synthesis pathway from Alcaligenes eutrophus has been introduced into sucrose-utilizing strains of Escherichia coli, Klebsiella aerogenes, and Klebsiella oxytoca. The plasmid-borne genes were well expressed in these environments and were able to mediate the production of significant amounts of PHB when the bacteria were grown with sucrose as the sole carbon source. The molecular weight of the PHB polymer made in K. aerogenes and E. coli was approximately 1 x 10(6) to 2 x 10(6). Sucrose uptake in K. aerogenes was measured and found to be similar to that found for other Klebsiella strains, but sucrose uptake in the E. coli strain was not detectable. K. aerogenes is able to utilize sugarcane molasses as the sole carbon source to accumulate PHB at the rate of approximately 1 g of PHB per liter of culture fluid per h. A K. oxytoca fadR strain was able to incorporate 3-hydroxyvalerate into a poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHB-co-V) polymer to levels as high as 56 mol% when grown in a medium containing propionate. Total PHB-co-V levels could be enhanced by adding propionate at the beginning of stationary phase rather than at the time of inoculation.