Plasmid pGB301, a new multiple resistance streptococcal cloning vehicle and its use in cloning of a gentamicin/kanamycin resistance determinant

Effect of TraN key residues involved in DNA binding on pIP501 transfer rates in Enterococcus faecalis

Conjugation is a major mechanism that facilitates the exchange of antibiotic resistance genes among bacteria. The broad-host-range Inc18 plasmid pIP501 harbors 15 genes that encode for a type IV secretion system (T4SS). It is a membrane-spanning multiprotein complex formed between conjugating donor and recipient cells. The penultimate gene of the pIP501 operon encodes for the cytosolic monomeric protein TraN. This acts as a transcriptional regulator by binding upstream of the operon promotor, partially overlapping with the origin of transfer. Additionally, TraN regulates traN and traO expression by binding upstream of the PtraNO promoter. This study investigates the impact of nine TraN amino acids involved in binding to pIP501 DNA through site-directed mutagenesis by exchanging one to three residues by alanine. For three traN variants, complementation of the pIP501∆traN knockout resulted in an increase of the transfer rate by more than 1.5 orders of magnitude compared to complementation of the mutant with native traN. Microscale thermophoresis (MST) was used to assess the binding affinities of three TraN double-substituted variants and one triple-substituted variant to its cognate pIP501 double-stranded DNA. The MST data strongly correlated with the transfer rates obtained by biparental mating assays in Enterococcus faecalis. The TraN variants TraN_R23A-N24A-Q28A, TraN_H82A-R86A, and TraN_G100A-K101A not only exhibited significantly lower DNA binding affinities but also, upon complementation of the pIP501∆traN knockout, resulted in the highest pIP501 transfer rates. This confirms the important role of the TraN residues R23, N24, Q28, H82, R86, G100, and K101 in downregulating pIP501 transfer. Although TraN is not part of the mating pair formation complex, TraE, TraF, TraH, TraJ, TraK, and TraM were coeluted with TraN in a pull-down. Moreover, TraN homologs are present not only in Inc18 plasmids but also in RepA_N and Rep_3 family plasmids, which are frequently found in enterococci, streptococci, and staphylococci. This points to a widespread role of this repressor in conjugative plasmid transfer among Firmicutes.

Illuminating the oral microbiome and its host interactions: tools and approaches for molecular microbiology studies

Advancements in DNA sequencing technologies within the last decade have stimulated an unprecedented interest in the human microbiome, largely due the broad diversity of human diseases found to correlate with microbiome dysbiosis. As a direct consequence of these studies, a vast number of understudied and uncharacterized microbes have been identified as potential drivers of mucosal health and disease. The looming challenge in the field is to transition these observations into defined molecular mechanistic studies of symbiosis and dysbiosis. In order to meet this challenge, many of these newly identified microbes will need to be adapted for use in experimental models. Consequently, this review presents a comprehensive overview of the molecular microbiology tools and techniques that have played crucial roles in genetic studies of the bacteria found within the human oral microbiota. Here, we will use specific examples from the oral microbiome literature to illustrate the biology supporting these techniques, why they are needed in the field, and how such technologies have been implemented. It is hoped that this information can serve as a useful reference guide to help catalyze molecular microbiology studies of the many new understudied and uncharacterized species identified at different mucosal sites in the body.

A Stable Genetic Transformation System and Implications of the Type IV Restriction System in the Nitrogen-Fixing Plant Endosymbiont Frankia alni ACN14a

Genus Frankia is comprised primarily of nitrogen-fixing actinobacteria that form root nodule symbioses with a group of hosts known as the actinorhizal plants. These plants are evolutionarily closely related to the legumes that are nodulated by the rhizobia. Both host groups utilize homologs of nodulation genes for root-nodule symbiosis, derived from common plant ancestors. The corresponding endosymbionts, Frankia and the rhizobia, however, are distantly related groups of bacteria, leading to questions about their symbiotic mechanisms and evolutionary history. To date, a stable system of electrotransformation has been lacking in Frankia despite numerous attempts by research groups worldwide. We have identified type IV methyl-directed restriction systems, highly-expressed in a range of actinobacteria, as a likely barrier to Frankia transformation. Here we report the successful electrotransformation of the model strain F. alni ACN14a with an unmethylated, broad host-range replicating plasmid, expressing chloramphenicol-resistance for selection and GFP as a marker of gene expression. This system circumvented the type IV restriction barrier and allowed the stable maintenance of the plasmid. During nitrogen limitation, Frankia differentiates into two cell types: the vegetative hyphae and nitrogen-fixing vesicles. When the expression of egfp under the control of the nif gene cluster promoter was localized using fluorescence imaging, the expression of nitrogen fixation in nitrogen-limited culture was localized in Frankia vesicles but not in hyphae. The ability to separate gene expression patterns between Frankia hyphae and vesicles will enable deeper comparisons of molecular signaling and metabolic exchange between Frankia-actinorhizal and rhizobia-legume symbioses to be made, and may broaden potential applications in agriculture. Further downstream applications are possible, including gene knock-outs and complementation, to open up a range of experiments in Frankia and its symbioses. Additionally, in the transcriptome of F. alni ACN14a, type IV restriction enzymes were highly expressed in nitrogen-replete culture but their expression strongly decreased during symbiosis. The down-regulation of type IV restriction enzymes in symbiosis suggests that horizontal gene transfer may occur more frequently inside the nodule, with possible new implications for the evolution of Frankia.

Antibiotic Binding Drives Catalytic Activation of Aminoglycoside Kinase APH(2″)-Ia

APH(2″)-Ia is a widely disseminated resistance factor frequently found in clinical isolates of Staphylococcus aureus and pathogenic enterococci, where it is constitutively expressed. APH(2″)-Ia confers high-level resistance to gentamicin and related aminoglycosides through phosphorylation of the antibiotic using guanosine triphosphate (GTP) as phosphate donor. We have determined crystal structures of the APH(2″)-Ia in complex with GTP analogs, guanosine diphosphate, and aminoglycosides. These structures collectively demonstrate that aminoglycoside binding to the GTP-bound kinase drives conformational changes that bring distant regions of the protein into contact. These changes in turn drive a switch of the triphosphate cofactor from an inactive, stabilized conformation to a catalytically competent active conformation. This switch has not been previously reported for antibiotic kinases or for the structurally related eukaryotic protein kinases. This catalytic triphosphate switch presents a means by which the enzyme can curtail wasteful hydrolysis of GTP in the absence of aminoglycosides, providing an evolutionary advantage to this enzyme.

Listeria monocytogenes: a promising vehicle for neonatal vaccination

Vaccination as a medical intervention has proven capable of greatly reducing the suffering from childhood infectious disease. However, newborns and infants in particular are age groups for whom adequate vaccine-mediated protection is still largely lacking. With the challenges that the neonatal immune system faces and the required highest level of stringency for safety, designing vaccines for early life in general and the newborn in particular poses great difficulty. Nevertheless, recent advances in our understanding of neonatal immunity and its responses to vaccines and adjuvants suggest that neonatal vaccination is a task fully within reach. Among the most promising developments in neonatal vaccination is the use of Listeria monocytogenes (Lm) as a delivery platform. In this review, we will outline key properties of Lm that make it such an ideal neonatal and early life vaccine vehicle, and also discuss potential constraints of Lm as a vaccine delivery platform.

Effect of Proteolytic Enzymes on Transfection and Transformation of Streptococcus lactis Protoplasts

With both chymotrypsin and mutanolysin used to form protoplasts, consistent transformation frequencies of 10 to 10 transformants and transfectants per mug of DNA were achieved. The procedure was used to transform protoplasts of Streptococcus cremoris CS224 at low frequency (5 transformants per mug of DNA).

Evidence for Plasmid Linkage of Raffinose Utilization and Associated alpha-Galactosidase and Sucrose Hydrolase Activity in Pediococcus pentosaceus

The ability to ferment the trisaccharide raffinose was linked with the presence of plasmid DNA in three strains of Pediococcus pentosaceus. Parental strains showed associated inducible alpha-galactosidase and sucrose hydrolase activities when grown in alpha-galactosides and sucrose, respectively. Derivative strains of PPE1.0, PPE2.0, and PPE5.0, which had lost 30-, 28-, and 23-megadalton plasmids, respectively, had no alpha-galactosidase or sucrose hydrolase activity.

Capsular polysaccharide production in Enterococcus faecalis and contribution of CpsF to capsule serospecificity

Many bacterial species produce capsular polysaccharides that contribute to pathogenesis through evasion of the host innate immune system. The gram-positive pathogen Enterococcus faecalis was previously reported to produce one of four capsule serotypes (A, B, C, or D). Previous studies describing the four capsule serotypes of E. faecalis were based on immunodetection methods; however, the underlying genetics of capsule production did not fully support these findings. Previously, it was shown that capsule production for serotype C (Maekawa type 2) was dependent on the presence of nine open reading frames (cpsC to cpsK). Using a novel genetic system, we demonstrated that seven of the nine genes in the cps operon are essential for capsule production, indicating that serotypes A and B do not make a capsular polysaccharide. In support of this observation, we showed that serotype C and D capsule polysaccharides mask lipoteichoic acid from detection by agglutinating antibodies. Furthermore, we determined that the genetic basis for the difference in antigenicity between serotypes C and D is the presence of cpsF in serotype C strains. High-pH anion-exchange chromatography with pulsed amperometric detection analysis of serotype C and D capsules indicated that cpsF is responsible for glucosylation of serotype C capsular polysaccharide in E. faecalis.

Listeria monocytogenes-based antibiotic resistance gene-free antigen delivery system applicable to other bacterial vectors and DNA vaccines

Plasmids represent a powerful tool to rapidly introduce genes into bacteria and help them reach high expression levels. In vaccine development, with live vaccine vectors, this allows greater flexibility and the ability to induce larger antigen amounts through multiple gene copies. However, plasmid retention often requires antibiotic resistance markers, the presence of which has been discouraged in clinical applications by the Food and Drug Administration. Therefore, we developed a Listeria monocytogenes-Escherichia coli shuttle plasmid that is retained by complementation of D-alanine racemase-deficient mutant strains both in vitro and in vivo. Our technology potentially allows the production of antibiotic resistance marker-free DNA vaccines as well as bacterial vaccine vectors devoid of engineered antibiotic resistances. As a proof of concept, we applied the D-alanine racemase complementation system to our Listeria cancer vaccine platform. With a transplantable tumor model, we compared the efficacy of the new Listeria vector to that of an established vector containing a conventional plasmid carrying a tumor-specific antigen. Both vaccine vector systems resulted in long-term regression of established tumors, with no significant difference between them. Thus, the Listeria vaccine vector presented here potentially complies with Food and Drug Administration regulations and could be developed further for clinical use.

Completed sequence of plasmid pIP501 and origin of spontaneous deletion derivatives

The sequence of plasmid pIP501 (30,603 bp) was completed using previously published and newly acquired data. The sites at which two spontaneous deletions had occurred were identified. One was between tracts of repeated heptamers and the other between regions of secondary structure associated with plasmid replication. A high level of identity ( >95%) between plasmid pIP501 and part of plasmid pRE25, which had been isolated from Enterococcus faecalis associated with a food source, was confirmed.

Characterization of a theta plasmid replicon with homology to all four large plasmids of Bacillus megaterium QM B1551

A replicon from one of an array of seven indigenous compatible plasmids of Bacillus megaterium QM B1551 has been cloned and sequenced. The replicon hybridized with all four of the large plasmids (165, 108, 71, and 47 kb) of strain QM B1551. The cloned 2374-bp HindIII fragment was sequenced and contained two upstream palindromes and a large (>419-amino-acid) open reading frame (ORF) truncated at the 3' end. Unlike most plasmid origins, a region of four tandem 12-bp direct repeats was located within the ORF. The direct repeats alone were incompatible with the replicon, suggesting that they are iterons and that the plasmid probably replicates by theta replication. The ORF product was shown to act in trans. A small region with similarity to the B. subtilis chromosomal origin membrane binding region was detected as were possible binding sites for DnaA and IHF proteins. Deletion analysis showed the minimal replicon to be a 1675-bp fragment containing the incomplete ORF plus 536 bp upstream. The predicted ORF protein of >48 kDa was basic and rich in glutamate + glutamine (16%). There was no significant amino acid similarity to any gene, nor were there any obvious motifs present in the ORF. The data suggest that this is a theta replicon with an expressed rep gene required for replication. The replicon contains its iterons within the gene and has no homology to reported replicons. It is the first characterization of a B. megaterium replicon.

Dual function of the copR gene product of plasmid pIP501

Replication of plasmid pIP501 is regulated at a step subsequent to transcription initiation by an antisense RNA (RNAIII) and transcriptionally by a repressor protein, CopR. Previously, it had been shown that CopR binds to a 44-bp DNA fragment upstream of and overlapping the repR promoter pII. Subsequently, we found that high-copy-number pIP501 derivatives lacking copR and low-copy-number derivatives containing copR produced the same intracellular amounts of RNAIII. This suggested a second, hitherto-unknown function of CopR. In this report, we show that CopR does not affect the half-life of RNAIII. Instead, we demonstrate in vivo that, in the presence of both pII and pIII, CopR provided in cis or in trans causes an increase in the intracellular concentration of RNAIII and that this effect is due to the function of the protein rather than its mRNA. We suggest that, in the absence of CopR, the increased (derepressed) RNAII transcription interferes, in cis, with initiation of transcription of RNAIII (convergent transcription), resulting in a lower RNAIII/plasmid ratio. When CopR is present, the pII promoter is repressed to >90%, so that convergent transcription is mostly abolished and RNAIII/plasmid ratios are high. The hypothesis that RNAII transcription influences promoter pIII through induced changes in DNA supercoiling is supported by the finding that the gyrase inhibitor novobiocin affects the accumulation of both sense and antisense RNA. The dual role of CopR in repression of RNAII transcription and in prevention of convergent transcription is discussed in the context of replication control of pIP501.

AbiG, a genotypically novel abortive infection mechanism encoded by plasmid pCI750 of Lactococcus lactis subsp. cremoris UC653

AbiG is an abortive infection (Abi) mechanism encoded by the conjugative plasmid pCI750 originally isolated from Lactococcus lactis subsp. cremoris UC653. Insensitivity conferred by this Abi manifested itself as complete resistance to phi 712 (936 phage species) with only partial resistance to phi c2 (c2 species). The mechanism did not inhibit phage DNA replication. The smallest subclone of pCI750 which expressed the Abi phenotype contained a 3.5-kb insert which encoded two potential open reading frames. abiGi (750 bp) and abiGii (1,194 bp) were separated by 2 bp and appeared to share a single promoter upstream of abiGi. These open reading frames showed no significant homology to sequences of either the DNA or protein databases; however, they did exhibit the typical low G+C content (29 and 27%, respectively) characteristic of lactococcal abi genes. In fact, the G+C content of a 7.0-kb fragment incorporating the abiG locus was 30%, which may suggest horizontal gene transfer from a species of low G+C content. In this context, it is notable that remnants of IS elements were observed throughout this 7.0-kb region.

A host-vector system for heterologous gene expression in Streptococcus gordonii

We have developed a host-vector system for heterologous expression in Streptococcus gordonii (Sg) Challis (formerly Streptococcus sanguis), a commensal bacterium of the human oral cavity. The system is based on (i) integration of plasmid insertion vectors into the chromosome of specially engineered recipient hosts, and (ii) the use of the M6-protein-encoding gene (emm6) as a partner for construction of translational gene fusions. M6 is a streptococcal surface protein already proven useful as a fusion partner for the delivery of foreign antigens to the surface of Sg [Pozzi et al., Infect. Immun. 60 (1992) 1902-1907]. Insertion vectors carry a drug-resistance marker, different portions of emm6 and a multiple cloning site to allow construction of a variety of emm6-based fusions. Upon transformation of a recipient host with an insertion vector, 100% of transformants acquire both the drug-resistance marker and the capacity of displaying the M6 molecule on the cell surface. Chromosomal integration occurred at high frequency in recipient host GP1221. Transformation with 1 microgram of insertion vector DNA yielded 8.1 X 10(5) transformants per ml of competent cells.

An unusually long-lived antisense RNA in plasmid copy number control: in vivo RNAs encoded by the streptococcal plasmid pIP501

The main regulator of pIP501 replication is an antisense RNA (RNAIII) that induces transcriptional attenuation of the essential RNAII. Previous studies identified the termination point in vivo and demonstrated attenuation in vitro. This in vivo analysis confirms the appearance of attenuated RNAII dependent on RNAIII. Half-lives and intracellular levels of RNAII and RNAIII were determined: in a Bacillus subtilis cell harboring a wild-type pIP501 plasmid, approximately 50 molecules RNAII and 1000 to 2000 molecules of RNAIII were measured, respectively. The half-life of RNAII was in the range of that of other target RNAs, whereas that of RNAIII (approximately 30 minutes) was unusually long, representing a so far unprecedented case of a metabolically stable antisense RNA regulating plasmid copy number. Long antisense RNA half-life is predicted to yield sluggish control and instability of maintenance. We propose a model for how plasmid pIP501 may avoid this problem by using both the repressor CopR and the antisense RNAIII for control. Four stem-loop mutants of RNAII/RNAIII with elevated copy numbers were characterized for in vitro antisense/target RNA binding, RNAIII half-life, incompatibility, and attenuation in vivo. Two classes were found: interaction mutants and half-life mutants. The former suggest a key function for loop LIII of RNAIII as recognition loop in the primary steps of RNAII/RNAIII interaction.

Lactococcin A overexpression in a Lactococcus lactis subsp. lactis transformant containing a Tn5 insertion in the lcnD gene

Lactococcin A production in lactococci has recently been linked to a signal-sequence-independent secretory system consisting of a four-gene cluster. Lactococcus lactis subsp. lactis LLM23L-A1 has been obtained after Tn5 mutagenesis of pLLM23, a plasmid containing the gene cluster responsible for lactococcin A production. In contrast to other Tn5-generated mutants, strain LLM23L-Al exhibited a 12-fold increase in lactococcin A production. Overproduction of lactococcin A was not linked to an increased pLLM23 copy number. Restriction-enzyme analysis indicated the site of Tn5 insertion to be at the 3' end of lcnD, and upstream of the lcnA structural gene. From DNA sequencing, the Tn5 insertion was located -79 bp upstream of the transcription start site of the lcnA and lciA genes, eliminating eight amino acids from the C-terminal end of lactococcin D. Northern blots revealed overproduction of a 500-base transcript in strain LLM23L-A1, which corresponded to that predicted from the positions of the lactococcin A operon transcriptional start site and the termination structures. This result suggests that the overproduction of lactococcin A in strain LLM23L-A1 is at the transcriptional level and provides further impetus for elucidating the complete regulatory mechanism for lactococcin A expression.

Genetic analysis of regions of the Lactococcus lactis subsp. lactis plasmid pRS01 involved in conjugative transfer

The genes responsible for conjugative transfer of the 48.4-kb Lactococcus lactis subsp. lactis ML3 plasmid pRS01 were localized by insertional mutagenesis. Integration of the IS946-containing plasmid pTRK28 into pRS01 generated a pool of stable cointegrates, including a number of plasmids altered in conjugative proficiency. Mapping of pTRK28 insertions and phenotypic analysis of cointegrate plasmids identified four distinct regions (Tra1, Tra2, Tra3, and Tra4) involved in pRS01 conjugative transfer. Tra3 corresponds closely to a region previously identified (D. G. Anderson and L. L. McKay, J. Bacteriol. 158:954-962, 1984). Another region (Tra4) was localized within an inversion sequence shown to correlate with a cell aggregation phenotype. Tra1 and Tra2, two previously unidentified regions, were located at a distance of 9 kb from Tra3. When provided in trans, a cloned portion of the Tra3 region complemented Tra3 mutants.

The gene amyE(TV1) codes for a nonglucogenic alpha-amylase from Thermoactinomyces vulgaris 94-2A in Bacillus subtilis

We isolated the gene amyE(TV1) from Thermoactinomyces vulgaris 94-2A encoding a nonglucogenic alpha-amylase (AmyTV1). A chromosomal DNA fragment of 2,247 bp contained an open reading frame of 483 codons, which was expressed in Escherichia coli and Bacillus subtilis. The deduced amino acid sequence of the AmyTV1 protein was confirmed by sequencing of several peptides derived from the enzyme isolated from a T. vulgaris 94-2A culture. The amino acid sequence was aligned with several known alpha-amylase sequences. We found 83% homology with the 48-kDa alpha-amylase part of the Bacillus polymyxa beta-alpha-amylase polyprotein and 50% homology with Taka amylase A of Aspergillus oryzae but only 45% homology with another T. vulgaris amylase (neopullulanase, TVA II) recently cloned from strain R-47. The putative promoter region was characterized with primer extension and deletion experiments and by expression studies with B. subtilis. Multiple promoter sites (P3, P2, and P1) were found; P1 alone drives about 1/10 of the AmyTV1 expression directed by the native tandem configuration P3P2P1. The expression levels in B. subtilis could be enhanced by fusion of the amyE(TV1) coding region to the promoter of the Bacillus amyloliquefaciens alpha-amylase gene.

RepR protein expression on plasmid pIP501 is controlled by an antisense RNA-mediated transcription attenuation mechanism

Expression of the rate-limiting initiator protein RepR of plasmid pIP501 is controlled by the antisense RNAIII. Mutational alteration of individual G residues within the single-stranded loops of RNAIII led to an increase in copy number. In contrast to the G-rich single-stranded loops, two smaller AT-rich loops of RNAIII were found to be dispensable for its inhibitory function. Reciprocal mutations in the same loop compensated for each other's effect, and a destabilization of the major stem structure of RNAIII also resulted in an increased copy number. These data were consistent with the idea that the interaction of RNAIII with its target starts with the formation of a kissing complex between the single-stranded loops of both molecules. The repR mRNA leader sequence, which includes the target of RNAIII, is able to assume two alternative structures due to the presence of two inverted repeats the individual sequences of which are mutually complementary. In the presence of the antisense RNAIII, one of these inverted repeats (IR2) is forced to fold into a transcriptional terminator structure that prevents transcription of the repR gene. In the absence of RNAIII, formation of the transcriptional terminator is prevented and expression of the essential repR gene can proceed normally. This antisense RNA-driven transcriptional attenuation mechanism was supported by extensive deletional analysis and direct evidence that IR2 functions as a transcriptional terminator.

Genetic organization and sequence of the region encoding integrative functions from Lactobacillus gasseri temperate bacteriophage phi adh

A 2.0-kb fragment from the Lactobacillus gasseri temperate bacteriophage phi adh contained the essential genetic determinants for site-specific integration. The nucleotide sequence of this fragment was determined. An open reading frame (intG), which adjoined the phage attachment site (attP), encoded a deduced protein related to the integrase family. The organization of this region was comparable to other phage site-specific recombination systems.

Characterization of the minimal origin required for replication of the streptococcal plasmid pIP501 in Bacillus subtilis

By using deletional analysis the origin of replication, oriR, of the streptococcal plasmid pIP501 in Bacillus subtilis has been mapped at a position immediately downstream of the repR gene. Determination of both the right and left border of oriR allowed the definition of a sequence of a maximum of 52 nucleotides which theoretically constitutes the minimal origin of replication. Recently, the start point of leading-strand synthesis of the closely related plasmid pAM beta 1 has been mapped at a position which is located exactly in the middle of this sequence (Bruand et al., 1991). The function of oriR did not depend on its location downstream of the repR gene. Translocation of oriR-containing fragments to other regions of the plasmid proved to be possible. The smallest translocated fragment that still reconstituted autonomous replication was 72bp in size. This fragment was also active in directing the replication of an Escherichia coli plasmid in B. subtilis when the RepR protein was supplied in trans from a repR gene integrated into the host chromosome. The transformation efficiency of plasmids carrying translocated oriR fragments showed a certain dependence on the fragment length and orientation. The DNA sequence of oriR included an inverted repeat, both branches of which appeared to be essential for oriR function. The repeats of oriR shared sequence similarity with a repeat located upstream of promoter pII, which has been suggested to be involved in autoregulation of repR expression.

Nucleotide sequence of the chloramphenicol resistance determinant of the streptococcal plasmid pIP501

We have sequenced the chloramphenicol resistance determinant (cat) of plasmid pIP501 from Streptococcus agalactiae to investigate its relationship with other cognate cat determinants. Sequence analysis revealed that it exhibits a high degree of similarity with the cat genes of plasmids pC221 and pUB112 from Staphylococcus aureus and pSCS1 from Staphylococcus intermedius. These genes, however, display several differences in their regulatory and coding regions. These results demonstrate that the cat determinant of plasmid pIP501 belongs to the pC221 subgroup of CAT variants.

The amount of RepR protein determines the copy number of plasmid pIP501 in Bacillus subtilis

To prove the hypothesis that the amount of RepR protein is the rate-limiting factor for replication of plasmid pIP501 in Bacillus subtilis, the repR gene was placed under control of the inducible promoter pspac. The plasmid copy number of the pIP501 derivative pRS9 could be deliberately adjusted between approximately 1 and 50 to 100 molecules per cell by varying the concentration of the inducer isopropyl-beta-D-thiogalactopyranoside. Construction of a repR-lacZ fusion proved that the increase in copy number was due to a proportional increase in the amount of RepR protein.

In vitro and in vivo analysis of transcription within the replication region of plasmid pIP501

Derivatives of the conjugative streptococcal plasmid pIP501 replicate stably in Bacillus subtilis. The region essential for replication of pIP501 has been narrowed down to a 2.2 kb DNA segment, the sequence of which has been determined. This region comprises two genes, copR and repR, proposed to be involved in copy control and replication. By in vitro and in vivo transcriptional analysis we characterized three active promoters, pI, pII and pIII within this region. A putative fourth promoter (pIV) was neither active in vitro nor in vivo. We showed that copR is transcribed from promoter pI while the repR gene is transcribed from promoter pII located just downstream of copR. The pII transcript encompasses a 329 nucleotide (nt) long leader sequence. A counter transcript that was complementary to a major part of this leader was found to originate from a third promoter pIII. The secondary structure of the counter transcript revealed several stem-loop regions. A regulatory function for this antisense RNA in the control of repR expression is proposed. Comparative analysis of the replication regions of pAM beta 1 and pSM19035 suggested a similar organization of transcriptional units, suggesting that an antisense RNA is produced by these plasmids also.

Molecular analyses of the lactococcin A gene cluster from Lactococcus lactis subsp. lactis biovar diacetylactis WM4

The genes responsible for bacteriocin production and immunity in Lactococcus lactis subsp. lactis biovar diacetylactis WM4 were localized and characterized by DNA restriction fragment deletion, subcloning, and nucleotide sequence analysis. The nucleotide sequence of a 5.6-kb AvaII restriction fragment revealed a cluster with five complete open reading frames (ORFs) in the same orientation. DNA and protein homology analyses, combined with deletion and Tn5 insertion mutagenesis, implicated four of the ORFs in the production of and immunity to lactococcin A. The last two ORFs in the cluster were the lactococcin A structural and immunity genes, lcnA and lciA. The two ORFs immediately upstream of lcnA and lciA were designated lcnC and lcnD, and the proteins that they encoded showed similarities to proteins of signal sequence-independent secretion systems. lcnC encodes a protein of 716 amino acids that could belong to the HlyB family of ATP-dependent membrane translocators. LcnC contains an ATP binding domain in a conserved C-terminal stretch of approximately 200 amino acids and three putative hydrophobic segments in the N terminus. The lcnD product, LcnD, of 474 amino acids, is essential for lactococcin A expression and shows structural similarities to HlyD and its homologs. On the basis of these results, a secretion apparatus that is essential for the full expression of active lactococcin A is postulated.

Copy number control of the streptococcal plasmid pIP501 occurs at three levels

Transcriptional analysis of the replication region of plasmid pIP501 has revealed three active promoters. The repR gene which is essential for pIP501 replication was transcribed from promoter pII. A small antisense RNA (136 nt, RNAIII) generated from promoter pIII was complementary to the leader region of the repR mRNA. Introduction of either point mutations or deletions into promoter pIII or RNAIII resulted in a 5-20fold increased plasmid copy number suggesting a negative regulatory function for RNAIII. The copR gene, the complete DNA and amino acid sequence of which is reported, was dispensable for pIP501 replication. However, deletion of the copR promoter pI and/or the copR coding sequence led to a 10-20fold increase in plasmid copy number. This effect was also observed when a -1 frameshift mutation was introduced into the CopR coding region. Mutations in copR and pIII/RNAIII were not additive. It is, therefore, proposed that both components act at the same level of copy number control most likely in a sequential way. A second level of copy number control was found to involve an inverted repeat structure upstream of and overlapping with promoter pII. Destruction of this repeat sequence by deletion caused an increase in copy number 2-3fold higher than that observed for either RNAIII or copR mutations. A working model is proposed how different components of pIP501 interact to regulate its copy number.

IS946-mediated integration of heterologous DNA into the genome of Lactococcus lactis subsp. lactis

The lactococcal insertion sequence IS946 was used to construct suicide vectors for insertion of heterologous DNA into chromosomal and plasmid sequences of Lactococcus lactis subsp. lactis. Electroporation of L. lactis strains, including the recombination-deficient strain MMS362, with the suicide vector pTRK145 yielded 10(1) to 10(3) transformants per micrograms of DNA. pTRK145 insertions occurred primarily in the chromosome, with one insertion detected in a resident plasmid. Vector-specific probes identified junction fragments that varied among transformants, indicating random insertions of pTRK145.

High efficiency electroporation of Lactococcus lactis subsp. lactis LM0230 with plasmid pGB301

Electroporation-mediated transformation of Lactococcus lactis with plasmid pGB301, a 9.8 kilobase pair vector (Behnke et al. 1981), has been reported by McIntyre & Harlander (1989a). Improved transformation efficiencies of 10(2)-10(3)/micrograms DNA were achieved by altering the conditions under which the bacteria were grown prior to electroporation (McIntyre & Harlander 1989b). This present investigation sought to improve still further transformation efficiencies in order to provide a reliable high frequency transformation system for Lc. lactis subsp. lactis.

Genetic construction of nisin-producing Lactococcus lactis subsp. cremoris and analysis of a rapid method for conjugation

Conjugation was used to construct nisin-producing Lactococcus lactis subsp. cremoris strains. Recipients were obtained by electroporation of L. lactis subsp. cremoris strains with the drug resistance plasmid pGK13 or pGB301. A method, direct-plate conjugation, was developed in which donor and recipient cells were concentrated and then combined directly on selective media. This method facilitated transfer of the nisin-sucrose (Nip+ Suc+) phenotype from the donor strain, L. lactis subsp. lactis 11454, to three L. lactis subsp. cremoris recipient strains. Nip+ Suc+ L. lactis subsp. cremoris transconjugants were obtained at frequencies which ranged from 10(-7) to 10(-8) per donor CFU. DNA-DNA hybridization to transconjugant DNAs, performed with an oligonucleotide probe synthesized to detect the nisin precursor gene, showed that this gene was transferred during conjugation but was not associated with detectable plasmid DNA. Further investigation indicated that L. lactis subsp. cremoris Nip+ Suc+ transconjugants retained the recipient strain phenotype with respect to bacteriophage resistance and acid production in milk. Results suggested that it would be feasible to construct nisin-producing L. lactis subsp. cremoris strains for application as mixed and multiple starter systems. Additionally, the direct-plate conjugation method required less time than filter or milk agar matings and may also be useful for investigations of conjugal mechanisms in these organisms.

Molecular analysis of the replication region of the conjugative Streptococcus agalactiae plasmid pIP501 in Bacillus subtilis. Comparison with plasmids pAM beta 1 and pSM19035

The large conjugative plasmid pIP501 was originally isolated from Streptococcus agalactiae. To study the molecular basis of pIP501 replication we determined the nucleotide sequence of a 2.2 kb DNA segment which is essential and sufficient for autonomous replication of pIP501 derived plasmids, in Bacillus subtilis cells. This region can be divided into two functionally discrete segments: a 496 bp region (oriR) that acts as an origin of replication, and a 1488 bp segment coding for an essential replication protein (RepR). The RepR protein, which has a molecular mass of 57.4 kDa, could complement in trans a thermosensitive replicon bearing the pIP501 origin. Chimeric Rep proteins and replicons were obtained by domain swapping between rep genes of closely related streptococcal plasmids belonging to the inc18 group (pIP501, pAM beta 1 and pSM19035). The chimeras were functional in B. subtilis.

Method and parameters for genetic transformation of Streptococcus sanguis Challis

A simple procedure for genetic transformation of Streptococcus sanguis Challis was developed and standardized. During the exponential phase of growth, cells became competent while growing as diplococci in broth containing 10% foetal calf serum. High levels of competence were maintained by the cultures for 60 min. Competent cells could be stored frozen without loss of competence for at least three years. Using total chromosomal DNA as donor, the dose-response curve for transformation of a point mutation (streptomycin resistance) showed one-hit kinetics, as the DNA concentration varied from 0.000001 to 10 micrograms/ml. At 10 micrograms/ml, more than 2.2% of the colony-forming units were transformed to streptomycin resistance, while transforming activity remained detectable with 1 pg of DNA/ml. Optimal time of exposure of competent cells to transforming DNA was 30 min. The transformation reaction was inhibited at 0 and 4 degrees C, whereas it occurred efficiently both at 25 and 37 degrees C.

Genetic approaches to the study of oral microflora: a review

As the study of oral microorganisms intensified almost 2 decades ago, the application of genetic techniques resulted in important contributions to the understanding of this clinically and ecologically important group of bacteria. The isolation and characterization of mutants of cariogenic streptococci helped to focus attention on traits that were important in colonization and virulence. Such classic genetic approaches gave way to molecular genetic techniques, including recombinant DNA methodology in the late 1970s. Gene cloning systems and methods to move DNA into cells have been developed for oral streptococci. Many streptococcal genes thought to be important in colonization and virulence have since been cloned and their nucleotide sequence determined. Mutant strains have been constructed using defective copies of cloned genes in order to create specific genetic lesions on the bacterial chromosome. By testing such mutants in animal models, a picture of the cellular and molecular basis of dental caries is beginning to emerge. These modern genetic methodologies also are being employed to develop novel and efficacious cell-free or whole cell vaccines against this infection. Genetic approaches and analyses are now being used to dissect microorganisms important in periodontal disease as well. Such systems should be able to exploit advances made in genetically manipulating related anaerobes, such as the intestinal Bacteroides. Gene cloning techniques in oral anaerobes, Actinomyces and Actinobacillus, are already beginning to pay dividends in helping understand gene structure and expression. Additional effort is needed to develop facile systems for genetic manipulation of these important groups of microorganisms.

Improved electroporation efficiency of intact Lactococcus lactis subsp. lactis cells grown in defined media

The impact of growth conditions on electroporation of Lactococcus lactis subsp. lactis LM0230 (previously designated Streptococcus lactis LM0230) was evaluated. Cells grown in M17 broth supplemented with 0.5% glucose (M17-Glu) and two chemically defined synthetic media, FMC and RPMI 1640, all supplemented with 0.24% DL-threonine or 0.5% glycine, were harvested, washed with double-distilled water, diluted, and porated in the presence of 1 microgram of pGB301 DNA with a Transfector 100 (BTX, Inc., San Diego, Calif.) or a Gene Pulser (Bio-Rad Laboratories, Richmond, Calif.). Transformants were recovered at consistently higher efficiencies for cells grown in FMC or RPMI 1640 (10(3) to 10(4) transformants per micrograms of DNA) than for cells grown in M17-Glu (10(1) to 10(2) transformants per micrograms of DNA). Other parameters influencing electroporation of L. lactis cells grown in chemically defined media were growth phase and final concentration of cells, concentration of plasmid DNA, voltage achieved during poration, and expression conditions. A high degree of variability in transformation efficiencies was evident for replicate samples of cells pulsed with either electroporation machine. A trend toward decreased variability was observed for duplicate samples of cells prepared on the same day. In addition, storage studies done with a large batch of cells prepared on the same day indicated that freezing dry cell pellets at -60 degrees C had no deleterious effect on transformation efficiencies over a 30-day period when a new 0.2-cm cuvette was used for porating each sample.

Localization of Separate Genetic Loci for Reduced Sensitivity towards Small Isometric-Headed Bacteriophage sk1 and Prolate-Headed Bacteriophage c2 on pGBK17 from Lactococcus lactis subsp. lactis KR2

The mechanism of reduced sensitivity to the small isometric-headed bacteriophage sk1 encoded on a 19-kilobase (kb) Hpa II fragment subcloned from pKR223 of Lactococcus lactis subsp. lactis KR2 was examined. The reduced sensitivity to phage sk1 was due to a modest restriction/modification (R/M) system that was not active against prolate-headed phage c2. The genetic loci for the R/M system against sk1 and the abortive phage infection (Abi) mechanism effective against phage c2 were then localized by restriction mapping, subcloning, and deletion analysis. The restriction gene was localized to a region of a 2.7-kb Eco RV fragment and included an Eco RI site within that fragment. The modification gene was found to be physically separable from the restriction gene and was present on a 1.75-kb Bst EII- Xba I fragment. The genetic locus for the Abi phenotype against phage c2 was localized to a region containing a 1.3-kb Eco RI fragment. Attempts to clone the c2 Abi mechanism independent of the sk1 R/M system were unsuccessful, suggesting that expression of the abi genes required sequences upstream of the modification gene. Some pGBK17 (vector pGB301 plus a 19-kb Hpa II insert fragment) transformants exhibited the R/M system against phage sk1 but lost the Abi mechanism against phage c2. These transformants contained a 1.2- to 1.3-kb insertion in the Abi region. The data identified genetic loci on a cloned 19-kb Hpa II fragment responsible for restriction activity and for modification activity against a small isometric-headed phage and for Abi activity against prolate-headed phage c2. A putative insertion element was also found to inactivate the abi gene(s).

Genetic transformation of intact Lactococcus lactis subsp. lactis by high-voltage electroporation

To apply recombinant DNA techniques for genetic manipulation of the industrially important lactococci, an efficient and reliable high-frequency transformation system must be available. High-voltage electric pulses have been demonstrated to enhance uptake of DNA into protoplasts and intact cells of numerous gram-negative and gram-positive microorganisms. The objective of this study was to develop a system for electroporating intact cells of Lactococcus lactis subsp. lactis LM0230 (previously designated Streptococcus lactis LM0230) with a commercially available electroporation unit (BTX Transfector 100; BTX, Inc., San Diego, Calif.). Parameters which influenced the efficiency of transformation included growth phase and final concentration of cells, ionic strength of the suspending medium, concentration of plasmid DNA, and the amplitude and duration of the pulse. Washed suspensions of intact cells suspended in deionized distilled water were subjected to one high-voltage electric pulse varying in voltage (300 to 900 V corresponding to field strengths of 5 to 17 kV/cm) and duration (100 microseconds to 1 s). Transformation efficiencies of 10(3) transformants per microgram of DNA were obtained when dense suspensions (final concentration, 5 x 10(10) CFU/ml) of stationary-phase cells were subjected to one pulse with a peak voltage of 900 V (field strength, 17 kV/cm) and a pulse duration of 5 ms in the presence of plasmid DNA. Dilution of porated cells in broth medium followed by an expression period of 2 h at 30 degrees C was beneficial in enhancing transformation efficiencies. Plasmids ranging in size from 9.8 to 30.0 kilobase pairs could be transformed by this procedure.

Evidence for the conjugal transfer of the broad host range plasmid pIP501 into strains of Lactobacillus helveticus

The conjugative broad host range plasmid pIP501 was transferred from Streptococcus faecalis to a series of strains of lactic streptococci used commercially as dairy starter cultures. With these transconjugants as donors the plasmid was exconjugated to two strains of Lactobacillus helveticus and a commercially used strain of Strep. thermophilus. There was evidence that the plasmid could transfer between isogenic derivatives of one of the strains of Lact. helveticus. Transfer from Lact. helveticus to Strep. faecalis was also detected but at a low frequency. There was no evidence for the conjugal transfer of plasmid pIP501 into a strain of Lact. bulgaricus by exconjugation from either lactic streptococci or Lactobacillus sp.

A method for genetic transformation of nonprotoplasted Streptococcus lactis

Plasmid transformation of whole cells of Streptococcus lactis LM0230 was demonstrated. The procedure required polyethylene glycol and incubation in hypertonic media, but did not require enzymatic cell wall digestion. Conditions were optimized, yielding 5 X 10(5) transformants per micrograms of pSA3 DNA. Variables tested for effect on transformation efficiency included molecular weight, concentration, and pH of polyethylene glycol; cell density; plating media; DNA concentration; heat shock; and incubation of cells in hypertonic buffer. DNAs transformed included pSA3, pVA856, pTV1, and c2 phi. Transformation from DNA-DNA ligation mixes, with DNA not purified through density gradients, and with previously frozen cells was also achieved. The method described here for transformation of nonprotoplasted cells of LM0230 is unique, and to date has not been applied successfully to other lactic acid bacteria.

Restriction enzyme analysis of lactose and bacteriocin plasmids from Streptococcus lactis subsp. diacetylactis WM4 and cloning of BclI fragments coding for bacteriocin production

The 131.1-kilobase (kb) bacteriocin production (Bac) plasmid pNP2 and the 63.6-kb lactose metabolism (Lac) plasmid pCS26, from Streptococcus lactis subsp. diacetylactis WM4, as well as pWN8, a 116.7-kb recombinant plasmid from a Lac+ transconjugant, were analyzed with restriction enzymes to determine the origin of pWN8. Plasmid pWN8 conferred a Lac+ Bac- phenotype, contained DNA derived from pCS26 and pNP2, and, like pNP2, exhibited self-transmissibility (Tra+). In cloning attempts, Bac+ transformant S. lactis KSH1 was isolated. The recombinant plasmid, pKSH1, contained three BclI fragments from pNP2. Bac- transformants which individually contained each of the three fragments were also identified. Comparison of restriction maps of pKSH1 and pNP2 revealed an 18.4-kb region common to both plasmids, involving two of the three BclI fragments. S. lactis KSH1 also exhibited greater inhibitory activity against the indicator strain S. diacetylactis 18-16 than did a strain containing the 131.1-kb Bac plasmid.

Dispersal of a plasmid-borne chloramphenicol resistance gene in streptococcal and enterococcal plasmids

Plasmids coding for chloramphenicol resistance, five isolated from streptococci of groups A, B, and G, ten from enterococci (Enterococcus faecalis, Enterococcus faecium), and two from staphylococci, were tested for sequence homology with the chloramphenicol resistance gene of pIP501, a 30-kb plasmid originally isolated from a group B Streptococcus. The 6.3-kb HindIII fragment of pIP501, known to carry the chloramphenicol resistance gene, was cloned into pBR322. A 1.6-kb portion of the cloned fragment, which included most of the chloramphenicol resistance gene, was used as probe in DNA-DNA hybridization experiments. Sequence homology was detected between the probe and four of the streptococcal, seven of the enterococcal, and one of the staphylococcal plasmids. The absence of hybridization between this probe and one plasmid isolated from a group B Streptococcus, as well as three isolated from E. faecalis, indicated that there are at least two different plasmid-borne chloramphenicol resistance determinants in the streptococci and in the enterococci.