Chemiluminometric hydrogen peroxide sensor for flow injection analysis

Development of a surface-modified paper-based colorimetric sensor using synthesized Ag NPs-alginate composite

There has been an increase in the discovery and usage of sensors for the detection of chemical compounds in the field of analytical chemistry since the last several years. This has led to progressive research in nanotechnology for developing efficient nanomaterials for bio-chemical sensing applications. Thereby, a deft synthesis of silver nanoparticles (Ag NPs) under microwave irradiation was achieved using sodium alginate as a reducing and capping agent in a fast and cost-effective approach. As per the X-ray diffraction analysis, the average particle size of Ag NPs was found to be 10 nm. X-ray photoelectron spectroscpopy analysis showed characteristic peaks at binding energies of 368.10 and 374.11 eV indicating the formation of Ag NPs. The synthesized Ag NPs-alginate composite was further used to develop a paper-based sensor for the detection of H₂O₂. Detection of H₂O₂ is based on the discolouration of the Ag NPs-alginate composite modified paper sensor as a function of H₂O₂ concentration. The analysis of the decoloured paper strips was done by a smartphone camera and an RGB Colour Reader application (app) to measure colour intensity. The sensing characteristics were found in the range of 0.1-10 mM. The colour analysis revealed piecewise linear relationship of intensity of RGB to H₂O₂ concentration in the range of 0.1-1.5 and 2-10 mM with R² values of 0.97 and 0.9778, respectively. Owing to the high sensitivity, selectivity, and cost-effectiveness, the developed paper sensor can be a potential tool for real-time analysis of H₂O₂.

Chemiluminescence detection for microfluidic cloth-based analytical devices (μCADs)

In this work, we report the first demonstration of chemiluminescence (CL) detection for microfluidic cloth-based analytical devices (μCADs). Wax screen-printing is used to make cloth channels or chambers, and enzyme-catalyzed CL reactions are imaged using an inexpensive charge coupled device (CCD). We first evaluate the relationship between the wicking rate and the length/width of cloth channel. For our device, the channel length and width between the loading and detection chambers are optimized to be 10mm and 3mm. Thus, the detection procedure can be accomplished in about 15s on a cloth-based device (15 × 30 mm(2)) by using 25-μL sample spotted on it. Next, several parameters affecting cloth-based CL intensity are studied, including exposure time, pH, and concentrations of luminol and enzyme. Under optimal conditions, a linear relationship is obtained between CL intensity and hydrogen peroxide (H2O2) concentrations in the range of 0.5-5mM with a detection limit of 0.46 mM. Finally, the utility of cloth-based CL is demonstrated for determination of H2O2 residues in meat samples. On our device, the chicken meat soaked for 6h with 3% H2O2 can be detected. Moreover, the supernatant of grinded meat sample can be directly applied, without need for other treatments. We believe that μCADs with CL detection could provide a new platform of rapid and low-cost assays for use in areas such as food detection and environmental monitoring.

Ordered assemblies of silver nanoparticles on carbon nitride sheets and their application in the non-enzymatic sensing of hydrogen peroxide and glucose

A facile fabrication of an ordered assembly of silver nanoparticles on carbon nitride sheets is reported. A modified glassy carbon electrode with carbon nitride sheets doped with silver nanoparticles can be used as a sensitive electrochemical sensor for hydrogen peroxide and glucose.

Studies on PVP hydrogel-supported luminol chemiluminescence: 2. Luminometer calibration and potential analytical applications

The use of poly(N-vinyl-2-pyrrolidone) (PVP) hydrogel-supported luminol chemiluminescence (CL) for the automatic determination of hydrogen peroxide and the quantification of the antiradical capacity of Trolox is described. The hydrogel containing luminol and hemin is prepared directly on a 96-well microplate and can be stored for up to 3 months without significant decrease in CL quantum yields. Furthermore, this system can also be used as a secondary light standard for the calibration of microplate luminometers.

Ultrasound-enhanced flow injection chemiluminescence for determination of hydrogen peroxide

A novel ultrasonic flow injection chemiluminescence (FI-CL) manifold for determining hydrogen peroxide (H2O2) has been designed and evaluated. Chemiluminescence obtained from the luminol-H2O2-cobalt(II) reaction was enhanced by applying 120 W of ultrasound for a period of 4 s to the reaction coil in the FI-CL system and this enhancement was verified by comparison with an identical manifold without ultrasound. The system was developed for determining ultra-trace levels of H2O2 and a calibration curve was obtained with a linear portion over the range of 10-200 nmol L(-1) H2O2 (correlation coefficient 0.9945). The detection limit (3sigma) and the quantification limit (LOQ) were found to be 1 x 10(-9) and 3.3 x 10(-9) mol L(-1) respectively and the relative standard deviation was 1.37% for 2 x 10(-7) mol L(-1) H2O2 (n = 10). The method was applied to the determination of trace amounts of H2O2 in purified water and natural water samples without any special pre-treatments.

A flow injection chemiluminescence method using Cr(III) as a catalyst for determining hydrogen peroxide. Application to H(2)O(2) determination in cultures of microalgae

Flow injection analysis has been applied to the determination of hydrogen peroxide produced by some different species of microalgae. The method is based on the luminol-H(2)O(2) chemiluminescence reaction using Cr(III) as a catalyst. Optimum experimental conditions for the method have been studied and trace amounts of hydrogen peroxide determined with detection limits of 4 10(-8) mol/L. The method using Cr(III) was compared with that using horseradish peroxidase as the catalyst.

Biosensors based on flow-through systems

When combined with biosensors as the sensing element microdialysis and flow injection analysis (FIA) systems become sophisticated tools for handling analytical processes. In particular a FIA system offers a high degree of automation together with high reproducibility and small sample volumes, whereas the biosensor, allows selective and sensitive measurements of the various analytes. Here we describe first a miniaturised microdialysis flow-through system developed for glucose determination, then we focus on amperometric immunosensors and on microbial sensors. In the former, antibodies against low molecular weight environmental contaminants or against high molecular weight proteins are responsible for analyte detection, whereas the latter use immobilised microorganisms as the recognising element for monitoring water pollutants.

Development of an amperometric flow injection immunoanalysis system for the determination of the herbicide 2,4-dichlorophenoxyacetic acid in water

An amperometric flow injection immunoanalysis (FIIA) system based on an immunoreactor with immobilized biocomponents on a silica surface has been developed for the determination of the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D). In the antigen coating mode the hapten was immobilized and monoclonal primary antibody against 2,4-D together with alkaline phosphatase (AP)-labelled secondary antibody were used as sensing elements in a titration assay. In the antibody coating mode a biotinylated monoclonal antibody was immobilized on the surface of the immunoreactor and a 2,4-D-AP-conjugate was used for detection. For electrochemical measurements p-aminophenol enzymatically generated from p-aminophenyl phosphate was oxidized at a carbon working electrode at +150 mV versus Ag/AgCl. The system enabled the determination of 2,4-D in drinking water samples in the range from 0.2 to 70 micrograms/l. The whole system was computer controlled with a measuring time of 12 min for one determination.