Frementation of biowaste to H2 by Bacillus licheniformis

Development of a Microalgae-Based Continuous Starch-to-Hydrogen Conversion Approach

Eukaryotic algae represent a highly heterogeneous group in terms of organization, lifestyle, and metabolic capabilities. Unicellular green microalgae are capable of biohydrogen production through direct and indirect photolysis as well as dark fermentation. Most algae hydrogen studies focus on axenic algal cultures, although these are difficult and expensive to maintain for continuous operation. Moreover, the complex interplays and metabolic fluxes between algae and bacteria in natural ecosystems provide a number of clear biological and technological benefits to large-scale functional algae-based systems. Two green algae species from the Chlamydomonas and Chlorella genera were used to engineer stable synthetic communities by incorporating a starch-degrading bacterium from the Bacillus genus into the inter-kingdom consortium. Continuous photoheterotrophic biohydrogen production was achieved by elaborating an appropriate algal–bacterial ratio and fine-tuning the culture conditions for the synthetic consortia. Medium with starch as only carbon source served as a simple model of cheap substrate for algal hydrogen generation. The engineered pairwise algal–bacterial associations showed increased biomass and biohydrogen yield compared to the axenic control conditions. Chlorella sp. MACC-360 produced a significantly higher amount of hydrogen when both the bacterium partner and starch were added to the media compared to the axenic algae. Continuous, elevated algal hydrogen production was achieved in media supplemented with 8 g L−1 starch as sole carbon source when carefully selected initial cell number values were used for the Chlorella sp. MACC-360–B. amlyloliquefaciens co-cultures.

Differential Multi-cellularity Is Required for the Adaptation for Bacillus licheniformis to Withstand Heavy Metals Toxicity

Bacillus licheniformis is a multi-metal tolerant bacteria, isolated from the paddy rhizospheric soil sample. Upon the multiple metal toxicity, B. licheniformis altered their phenotypic/morphogenesis. Here we examined the effects of cadmium (Cd2+), chromium (Cr2+), and mercury (Hg2+) on the morphogenesis of B. licheniformis in comparison to control. We found that the ability of bacteria to grow effectively in presence of cadmium and chromium comes at a cost of acquiring cell density-driven mobility and reformation of filamentous to donut shape respectively. In particular, when bacteria grown on mercury it showed the bacteriostatic strategy to resist mercury. Furthermore, the findings suggest a large variation in the production of exo-polysaccharides (EPS) and suggest the possible role of EPS in gaining resistance to cadmium and chromium. Together this study identifies previously unknown characteristics of B. licheniformis to participate in bioremediation and provides the first evidence on positive effects of bacterial morphogenesis and the involvement of EPS in bacteria to resisting metal toxicity.

Aligning Microbial Biodiversity for Valorization of Biowastes: Conception to Perception

Generation of biowastes is increasing rapidly and its uncontrolled, slow and persistent fermentation leads to the release of Green-house gases (GHGs) into the environment. Exploration and exploitation of microbial diversity for degrading biowastes can result in producing diverse range of bioactive molecules, which can act as a source of bioenergy, biopolymers, nutraceuticals and antimicrobials. The whole process is envisaged to manage biowastes, and reduce their pollution causing capacity, and lead to a sustainable society. A strategy has been proposed for: (1) producing bioactive molecules, and (2) achieving a zero-pollution emission by recycling of the GHGs through biological routes.

The Diversity and Geographic Distribution of Cultivable Bacillus-Like Bacteria Across Black Soils of Northeast China

Bacillus-like species are gram-positive bacteria that are ubiquitous in soils. Many of Bacillus-like bacteria are demonstrated as beneficial microbes widely used in industry and agriculture. However, the knowledge related to their diversity and distribution patterns in soils is still rudimentary. In this study, we developed a combined research method of using culture-dependent and high-throughput sequencing to investigate the composition and diversity of cultivable Bacillus-like bacterial communities across 26 soil samples obtained from the black soil zone in northeast China. Nearly all bacterial 16S rDNA sequences were classified into the order Bacillales. Fifteen genera were detected, with Bacillus, Paenibacillus, and Brevibacillus being the three most abundant genera. Although more than 2,000 OTUs were obtained across all samples, 33 OTUs were confirmed as the abundant species with a relative abundance over 5% in at least one sample. Pairwise analysis showed that the diversity of Bacillus-like bacterial communities were significantly and positively correlated with soil total carbon contents and soil sampling latitudes, which suggests that a latitudinal gradient diversity of Bacillus-like bacterial communities exists in the black soil zone. The principal coordinates analysis revealed that the Bacillus-like bacterial communities were remarkably affected by soil sampling latitudes and soil total carbon content. In general, this study demonstrated that a distinct biogeographic distribution pattern of cultivable Bacillus-like bacterial communities existed in the black soil zone, which emphasizes that the strategy of local isolation and application of beneficial Bacillus-like strains is rather important in black soil agriculture development.

Corn industrial wastewater (nejayote): a promising substrate in Mexico for methane production in a coupled system (APCR-UASB)

In Mexico, the corn tortilla is a food of great economic importance. Corn tortilla production generates about 1500-2000 m³ of wastewater per 600 tons of processed corn. Although this wastewater (also known as nejayote) has a high organic matter content, few studies in Mexico have analyzed its treatment. This study presents fresh data on the potential methane production capacity of nejayote in a two-phase anaerobic digestion system using an Anaerobic-Packed Column Reactor (APCR) to optimize the acidogenic phase and an up-flow anaerobic sludge blanket (UASB) reactor to enhance the methanogenic process. Results indicate that day 8 was ideal to couple the APCR to the UASB reactor. This allowed for a 19-day treatment that yielded 96% COD removal and generated a biogas containing 84% methane. The methane yield was 282 L kg^-1 of COD_removed. Thus, two-phase anaerobic digestion is an efficient process to treat nejayote; furthermore, this study demonstrated the possibility of using an industrial application by coupling the APCR to the UASB reactor system, in order to assess its feasibility for biomethane generation as a sustainable bioenergy source.

Characteristics of rumen microorganisms involved in anaerobic degradation of cellulose at various pH values

Microbial degradation of straw, the main by-product of agricultural production, has proved to be the most economical and effective means of producing hydrogen.

Diversity of Bacillus-like bacterial community in the sediments of the Bamenwan mangrove wetland in Hainan, China

Members of the genus Bacillus and related spore-forming genera are ubiquitous. However, Bacillus-like species isolated from marine sediments have attracted less interest than their terrestrial relatives. Here, we investigated the diversity of Bacillus-like bacterial communities in the sediments of the Bamenwan mangrove wetland in Hainan, China, using culture-dependent and culture-independent methods, and present the first report on this subject. We also discovered some potential novel species from the sediment samples. Four families, Bacillaceae (58%), Paenibacillaceae (22%), Alicyclobacillaceae (15%), and Planococcaceae (5%), and 9 genera, Bacillus (42%), Paenibacillus (16%), Halobacillus (13%), Alicyclobacillus (11%), Rummeliibacillus (5%), Cohnella (5%), Tumebacillus (4%), Pontibacillus (3%), and Aneurinibacillus (2%), were identified by pyrosequencing. In contrast, only 4 genera, Bacillus (57%), Paenibacillus (23%), Halobacillus (14%), and Virgibacillus (6%), were detected by the culture-dependent method. In the 16S rDNA sequencing analysis, the isolates HB12036 and HB12037 were closest to Bacillus okuhidensis Kh10-101^T and Paenibacillus xylanilyticus XIL14^T with similarities of 94.8% and 95.9%, respectively, indicating that these were novel species. Bacillus sp. HB12035 and HB12040 exhibited antimicrobial activity against Staphylococcus aureus ATCC 25923, and Bacillus sp. HB12033 exhibited antimicrobial activity against Ustilago scitaminea Syd.

Comparison of Different Strategies for Selection/Adaptation of Mixed Microbial Cultures Able to Ferment Crude Glycerol Derived from Second-Generation Biodiesel

Objective of this study was the selection and adaptation of mixed microbial cultures (MMCs), able to ferment crude glycerol generated from animal fat-based biodiesel and produce building-blocks and green chemicals. Various adaptation strategies have been investigated for the enrichment of suitable and stable MMC, trying to overcome inhibition problems and enhance substrate degradation efficiency, as well as generation of soluble fermentation products. Repeated transfers in small batches and fed-batch conditions have been applied, comparing the use of different inoculum, growth media, and Kinetic Control. The adaptation of activated sludge inoculum was performed successfully and continued unhindered for several months. The best results showed a substrate degradation efficiency of almost 100% (about 10 g/L glycerol in 21 h) and different dominant metabolic products were obtained, depending on the selection strategy (mainly 1,3-propanediol, ethanol, or butyrate). On the other hand, anaerobic sludge exhibited inactivation after a few transfers. To circumvent this problem, fed-batch mode was used as an alternative adaptation strategy, which led to effective substrate degradation and high 1,3-propanediol and butyrate production. Changes in microbial composition were monitored by means of Next Generation Sequencing, revealing a dominance of glycerol consuming species, such as Clostridium, Klebsiella, and Escherichia.

Integrative approach to produce hydrogen and polyhydroxybutyrate from biowaste using defined bacterial cultures

Biological production of hydrogen (H2) and polyhydroxybutyrate (PHB) from pea-shell slurry (PSS) was investigated using defined mixed culture (MMC4, composed of Enterobacter, Proteus, Bacillus spp.). Under batch culture, 19.0LH2/kg of PSS (total solid, TS, 2%w/v) was evolved. Using effluent from the H2 producing stage, Bacillus cereus EGU43 could produce 12.4% (w/w) PHB. Dilutions of PSS hydrolysate containing glucose (0.5%, w/v) resulted in 45-75LH2/kg TS fed and 19.1% (w/w) of PHB content. Under continuous culture, MMC4 immobilized on coconut coir (CC) lead to an H2 yield of 54L/kg TS fed and a PHB content of 64.7% (w/w). An improvement of 2- and 3.7-fold in H2 and PHB yields were achieved in comparison to control. This integrative approach using defined set of bacterial strains can prove effective in producing biomolecules from biowastes.

Potential of biogenic hydrogen production for hydrogen driven remediation strategies in marine environments

Fermentative production of bio-hydrogen (bio-H2) from organic residues has emerged as a promising alternative for providing the required electron source for hydrogen driven remediation strategies. Unlike the widely used production of H2 by bacteria in fresh water systems, few reports are available regarding the generation of biogenic H2 and optimisation processes in marine systems. The present research aims to optimise the capability of an indigenous marine bacterium for the production of bio-H2 in marine environments and subsequently develop this process for hydrogen driven remediation strategies. Fermentative conversion of organics in marine media to H2 using a marine isolate, Pseudoalteromonas sp. BH11, was determined. A Taguchi design of experimental methodology was employed to evaluate the optimal nutritional composition in batch tests to improve bio-H2 yields. Further optimisation experiments showed that alginate-immobilised bacterial cells were able to produce bio-H2 at the same rate as suspended cells over a period of several weeks. Finally, bio-H2 was used as electron donor to successfully dehalogenate trichloroethylene (TCE) using biogenic palladium nanoparticles as a catalyst. Fermentative production of bio-H2 can be a promising technique for concomitant generation of an electron source for hydrogen driven remediation strategies and treatment of organic residue in marine ecosystems.

Ecobiotechnological strategy to enhance efficiency of bioconversion of wastes into hydrogen and methane

Vegetable wastes (VW) and food wastes (FW) are generated in large quantities by municipal markets, restaurants and hotels. Waste slurries (250 ml) in 300 ml BOD bottles, containing 3, 5 and 7 % total solids (TS) were hydrolyzed with bacterial mixtures composed of: Bacillus, Acinetobacter, Exiguobacterium, Pseudomonas, Stenotrophomonas and Sphingobacterium species. Each of these bacteria had high activities for the hydrolytic enzymes: amylase, protease and lipase. Hydrolysate of biowaste slurries were subjected to defined mixture of H2 producers and culture enriched for methanogens. The impact of hydrolysis of VW and FW was observed as 2.6- and 2.8-fold enhancement in H2 yield, respectively. Direct biomethanation of hydrolysates of VW and FW resulted in 3.0- and 1.15-fold improvement in CH4 yield, respectively. A positive effect of hydrolysis was also observed with biomethanation of effluent of H2 production stage, to the extent of 1.2- and 3.5-fold with FW and VW, respectively. The effective H2 yields were 17 and 85 l/kg TS fed, whereas effective CH4 yields were 61.7 and 63.3 l/kg TS fed, from VW and FW, respectively. This ecobiotechnological strategy can help to improve the conversion efficiency of biowastes to biofuels.

Metabolic engineering of Escherichia coli to enhance hydrogen production from glycerol

Glycerol is an attractive carbon source for biofuel production since it is cheap and abundant due to the increasing demand for renewable and clean energy sources, which includes production of biodiesel. This research aims to enhance hydrogen production by Escherichia coli from glycerol by manipulating its metabolic pathways via targeted deletions. Since our past strain, which had been engineered for producing hydrogen from glucose, was not suitable for producing hydrogen from glycerol, we rescreened 14 genes related to hydrogen production and glycerol metabolism. We found that 10 single knockouts are beneficial for enhanced hydrogen production from glycerol, namely, frdC (encoding for furmarate reductase), ldhA (lactate dehydrogenase), fdnG (formate dehydrogenase), ppc (phosphoenolpyruvate carboxylase), narG (nitrate reductase), focA (formate transporter), hyaB (the large subunit of hydrogenase 1), aceE (pyruvate dehydrogenase), mgsA (methylglyoxal synthase), and hycA (a regulator of the transcriptional regulator FhlA). On that basis, we created multiple knockout strains via successive P1 transductions. Simultaneous knockouts of frdC, ldhA, fdnG, ppc, narG, mgsA, and hycA created the best strain that produced 5-fold higher hydrogen and had a 5-fold higher hydrogen yield than the parent strain. The engineered strain also reached the theoretical maximum yield of 1 mol H2/mol glycerol after 48 h. Under low partial pressure fermentation, the strain grew over 2-fold faster, indicating faster utilization of glycerol and production of hydrogen. By combining metabolic engineering and low partial pressure fermentation, hydrogen production from glycerol was enhanced significantly.

Increased H2 production by immobilized microorganisms

Viable cells of H2-producers (Bacillus licheniformis and a mixed microbial culture) were immobilized on brick dust and in calcium alginate beads. In batch culture, cells of the mixed culture in the free state yielded 8.2 l H2/mol glucose utilized, whereasB. licheniformis evolved 13.1 l H2. Immobilized cells, however, gave 4-fold more H2 than the free bacteria. Highest yields were from the cells immobilized on brick dust. High H2-production rates continued over two rounds of re-use of the immobilized cells.

Synechocystis sp. PCC6803 metabolic models for the enhanced production of hydrogen

In the present economy, difficulties to access energy sources are real drawbacks to maintain our current lifestyle. In fact, increasing interests have been gathered around efficient strategies to use energy sources that do not generate high CO2 titers. Thus, science-funding agencies have invested more resources into research on hydrogen among other biofuels as interesting energy vectors. This article reviews present energy challenges and frames it into the present fuel usage landscape. Different strategies for hydrogen production are explained and evaluated. Focus is on biological hydrogen production; fermentation and photon-fuelled hydrogen production are compared. Mathematical models in biology can be used to assess, explore and design production strategies for industrially relevant metabolites, such as biofuels. We assess the diverse construction and uses of genome-scale metabolic models of cyanobacterium Synechocystis sp. PCC6803 to efficiently obtain biofuels. This organism has been studied as a potential photon-fuelled production platform for its ability to grow from carbon dioxide, water and photons, on simple culture media. Finally, we review studies that propose production strategies to weigh this organism's viability as a biofuel production platform. Overall, the work presented in this review unveils the industrial capabilities of cyanobacterium Synechocystis sp. PCC6803 to evolve interesting metabolites as a clean biofuel production platform.

Production of Polyhydroxyalkanoate Co-polymer by Bacillus thuringiensis

Integrative processes for the production of bioenergy and biopolymers are gaining importance in recent years as alternatives to fossil fuels and synthetic plastics. In the present study, Bacillus thuringiensis strain EGU45 has been used to generate hydrogen (H2), polyhydroxybutyrate (PHB) and new co-polymers (NP). Under batch culture conditions with 250 ml synthetic media, B. thuringiensis EGU45 produced up to 0.58 mol H2/mol of glucose. Effluent from the H2 production stage was incubated under shaking conditions leading to the production of PHB up to 95 mg/l along with NP of levulinic acid up to 190 mg/l. A twofold to fourfold enhancement in PHB and up to 1.5 fold increase in NP yields was observed on synthetic medium (mixture of M-9+GM-2 medium in 1:1 ratio) containing at 1-2 % glucose concentration. The novelty of this work lies in developing modified physiological conditions, which induce bacterial culture to produce NP.

A comprehensive and quantitative review of dark fermentative biohydrogen production

Biohydrogen production (BHP) can be achieved by direct or indirect biophotolysis, photo-fermentation and dark fermentation, whereof only the latter does not require the input of light energy. Our motivation to compile this review was to quantify and comprehensively report strains and process performance of dark fermentative BHP. This review summarizes the work done on pure and defined co-culture dark fermentative BHP since the year 1901. Qualitative growth characteristics and quantitative normalized results of H2 production for more than 2000 conditions are presented in a normalized and therefore comparable format to the scientific community.Statistically based evidence shows that thermophilic strains comprise high substrate conversion efficiency, but mesophilic strains achieve high volumetric productivity. Moreover, microbes of Thermoanaerobacterales (Family III) have to be preferred when aiming to achieve high substrate conversion efficiency in comparison to the families Clostridiaceae and Enterobacteriaceae. The limited number of results available on dark fermentative BHP from fed-batch cultivations indicates the yet underestimated potential of this bioprocessing application. A Design of Experiments strategy should be preferred for efficient bioprocess development and optimization of BHP aiming at improving medium, cultivation conditions and revealing inhibitory effects. This will enable comparing and optimizing strains and processes independent of initial conditions and scale.

Integrative biological hydrogen production: an overview

Biological hydrogen (H2) production by dark and photo-fermentative organisms is a promising area of research for generating bioenergy. A large number of organisms have been widely studied for producing H2 from diverse feeds, both as pure and as mixed cultures. However, their H2 producing efficiencies have been found to vary (from 3 to 8 mol/mol hexose) with physiological conditions, type of organisms and composition of feed (starchy waste from sweet potato, wheat, cassava and algal biomass). The present review deals with the possibilities of enhancing H2 production by integrating metabolic pathways of different organisms-dark fermentative bacteria (from cattle dung, activated sludge, Caldicellulosiruptor, Clostridium, Enterobacter, Lactobacillus, and Vibrio) and photo-fermentative bacteria (such as Rhodobacter, Rhodobium and Rhodopseudomonas). The emphasis has been laid on systems which are driven by undefined dark-fermentative cultures in combination with pure photo-fermentative bacterial cultures using biowaste as feed. Such an integrative approach may prove suitable for commercial applications on a large scale.

Fermentative biohydrogen production from lactate and acetate

In this study, a continuous-flow stirred tank reactor (CSTR) fed with lactate and acetate was operated to enrich hydrogen-producing bacteria. By varying the influent substrate concentrations and hydraulic retention times (HRT), the volumetric loading rate (VLR) of 55.64 kg-COD/m(3)/day seemed to be optimum for this enriched culture for fermentative hydrogen production from lactate and acetate. The results of batch experiments confirmed that the enriched culture tended to fulfill the e(-) equiv requirement for cell growth at a lower VLR condition (21.77 kg-COD/m(3)/day), while it could largely distribute the e(-) equiv for hydrogen production at a higher VLR condition. However, a maximum lactate/acetate concentration allowed for enriching this culture existed, especially at a lower HRT condition in which wash-out can be an issue for this enriched culture. Finally, the results of cloning and sequencing indicated that Clostridium tyrobutyricum was considered the major hydrogen-producing bacteria in the CSTR fed with lactate and acetate.

A two-stage bioprocess for hydrogen and methane production from rice straw bioethanol residues

This study evaluates a two-stage bioprocess for recovering hydrogen and methane while treating organic residues of fermentative bioethanol from rice straw. The obtained results indicate that controlling a proper volumetric loading rate, substrate-to-biomass ratio, or F/M ratio is important to maximizing biohydrogen production from rice straw bioethanol residues. Clostridium tyrobutyricum, the identified major hydrogen-producing bacteria enriched in the hydrogen bioreactor, is likely utilizing lactate and acetate for biohydrogen production. The occurrence of acetogenesis during biohydrogen fermentation may reduce the B/A ratio and lead to a lower hydrogen production. Organic residues remained in the effluent of hydrogen bioreactor can be effectively converted to methane with a rate of 2.8 mmol CH(4)/gVSS/h at VLR of 4.6 kg COD/m(3)/d. Finally, approximately 75% of COD in rice straw bioethanol residues can be removed and among that 1.3% and 66.1% of COD can be recovered in the forms of hydrogen and methane, respectively.

The Paenibacillus polymyxa species is abundant among hydrogen-producing facultative anaerobic bacteria in Lake Averno sediment

Lake Averno sediment was used to isolate the facultative anaerobic bacteria having the potential for H(2) production. Twenty-five out of 35 isolates recovered from the sediment sample produced hydrogen under anaerobic conditions from glucose with yields ranging from 0.1 to 0.49 mol H(2)/mol glucose. Identification based on 16S rRNA gene sequence analysis revealed that most of them belong to the Firmicutes group, with a prevalence of the Paenibacillus polymyxa species. Seven distinct genomic fingerprints among the 11 P. polymyxa isolates were obtained using the random amplified polymorphic DNA (RAPD) technique. Glucose fermentation by P. polymyxa isolates was investigated. Glucose was totally consumed after 3 days of fermentation. The fermentation products were hydrogen (0.18-0.47 mol H(2)/mol glucose), ethanol (0.1-0.5 mol ethanol/mol glucose), and 2,3-butanediol (0.1 mol 2,3-butanediol/mol glucose). Lower amounts of acetic, butyric, formic, lactic, and propionic acids were detected. All metabolic data concerning P. polymyxa isolates were analyzed by cluster analysis to reveal similarities and/or differences with clustering based on RAPD profiles. Despite the high metabolic similarity among almost all P. paenibacillus isolates, results of cluster analyses of metabolic and genetic data do not match completely.

Hydrogen and Polyhydroxybutyrate Producing Abilities of Bacillus spp. From Glucose in Two Stage System

Metabolic activities of four Bacillus strains to transform glucose into hydrogen (H(2)) and polyhydroxybutyrate (PHB) in two stages were investigated in this study. Under batch culture conditions, Bacillus thuringiensis EGU45 and Bacillus cereus EGU44 evolved 1.67-1.92 mol H(2)/mol glucose, respectively during the initial 3 days of incubation at 37°C. In the next 2 days, the residual glucose solutions along with B. thuringiensis EGU45 shaken at 200 rpm was found to produce PHB yield of 11.3% of dry cell mass. This is the first report among the non-photosynthetic microbes, where the Bacillus spp.-B. thuringiensis and B. cereus strains have been shown to produce H(2) and PHB in same medium under different conditions.

Dark fermentation on biohydrogen production: Pure culture

Biohydrogen is regarded as an attractive future clean energy carrier due to its high energy content and environmental-friendly conversion. While biohydrogen production is still in the early stage of development, there have been a variety of laboratory- and pilot-scale systems developed with promising potential. This work presents a review of literature reports on the pure hydrogen-producers under anaerobic environment. Challenges and perspective of biohydrogen production with pure cultures are also outlined.

Evaluation of bioenergy recovery processes treating organic residues from ethanol fermentation process

This study evaluates a two-stage bioprocess for recovering bioenergy in the forms of hydrogen and methane while treating organic residues of ethanol fermentation from tapioca starch. A maximum hydrogen production rate of 0.77 mmol H(2)/g VSS/h can be achieved at volumetric loading rate (VLR) of 56 kg COD/m(3)/day. Batch results indicate that controlling conditions at S(0)/X(0)=12 with X(0)=4000 mg VSS/L and pH 5.5-6 are important for efficient hydrogen production from fermentation residues. Hydrogen-producing bacteria enriched in the hydrogen bioreactor are likely utilizing lactate and acetate for biohydrogen production from ethanol-fermentation residues. Organic residues remained in the effluent of hydrogen bioreactor can be effectively converted to methane with a rate of 0.37 mmol CH(4)/g VSS/h at VLR of 8 kg COD/m(3)/day. Approximately 90% of COD in ethanol-fermentation residues can be removed and among that 2% and 85.1% of COD can be recovered in the forms of hydrogen and methane, respectively.

Hydrogen and methane production from swine wastewater using microbial electrolysis cells

The production of a useful and valuable product during swine wastewater treatment, such as hydrogen gas, could help to lower treatment costs. Hydrogen can theoretically be produced from wastewater by electrohydrogenesis in a microbial electrolysis cell (MEC) or by fermentation. Using a single-chamber MEC with a graphite-fiber brush anode, hydrogen gas was generated at 0.9-1.0 m(3) m(-3) day(-1) H2 using a full-strength or diluted swine wastewater. COD removals ranged from 8 to 29% in 20-h tests, and from 69 to 75% in longer tests (184 h) using full-strength wastewater. The gas produced was up to 77+/-11% hydrogen, with overall recoveries of up to 28+/-6% of the COD in the wastewater as hydrogen gas. Methane was also produced at a maximum of 13+/-4% of total gas volume. The efficiency of hydrogen production, based on the electrical energy needed (but excluding the energy in the wastewater) compared to the energy of the hydrogen gas produced, was as high as 190+/-39% in 42-h batch tests with undiluted wastewater, but was lower in longer batch tests of 184 h (91+/-6%). Hydrogen gas could not be recovered in fermentation tests using wastewater with a heat-treated inoculum. Hydrogen production was shown to be possible by fermentation when the wastewater was sterilized, but this process would not be practical or energy efficient. We therefore conclude from these tests that MECs are an effective method for hydrogen recovery from swine wastewater treatment, although the process needs to be further evaluated for reducing methane production, increasing the efficiency of converting the organic matter into current, and increasing recovery of hydrogen gas produced at the cathode.

Phylogeny in aid of the present and novel microbial lineages: diversity in Bacillus

Bacillus represents microbes of high economic, medical and biodefense importance. Bacillus strain identification based on 16S rRNA sequence analyses is invariably limited to species level. Secondly, certain discrepancies exist in the segregation of Bacillus subtilis strains. In the RDP/NCBI databases, out of a total of 2611 individual 16S rDNA sequences belonging to the 175 different species of the genus Bacillus, only 1586 have been identified up to species level. 16S rRNA sequences of Bacillus anthracis (153 strains), B. cereus (211 strains), B. thuringiensis (108 strains), B. subtilis (271 strains), B. licheniformis (131 strains), B. pumilus (83 strains), B. megaterium (47 strains), B. sphaericus (42 strains), B. clausii (39 strains) and B. halodurans (36 strains) were considered for generating species-specific framework and probes as tools for their rapid identification. Phylogenetic segregation of 1121, 16S rDNA sequences of 10 different Bacillus species in to 89 clusters enabled us to develop a phylogenetic frame work of 34 representative sequences. Using this phylogenetic framework, 305 out of 1025, 16S rDNA sequences presently classified as Bacillus sp. could be identified up to species level. This identification was supported by 20 to 30 nucleotides long signature sequences and in silico restriction enzyme analysis specific to the 10 Bacillus species. This integrated approach resulted in identifying around 30% of Bacillus sp. up to species level and revealed that B. subtilis strains can be segregated into two phylogenetically distinct groups, such that one of them may be renamed.

Hydrogen and polyhydroxybutyrate producing abilities of microbes from diverse habitats by dark fermentative process

Thirty five bacterial isolates from diverse environmental sources such as contaminated food, nitrogen rich soil, activated sludges from pesticide and oil refineries effluent treatment plants were found to belong to Bacillus, Bordetella, Enterobacter, Proteus, and Pseudomonas sp. on the basis of 16S rRNA gene sequence analysis. Under dark fermentative conditions, maximum hydrogen (H(2)) yields (mol/mol of glucose added) were recorded to be 0.68 with Enterobacter aerogenes EGU16 followed by 0.63 with Bacillus cereus EGU43 and Bacillus thuringiensis EGU45. H(2) constituted 63-69% of the total biogas evolved. Out of these 35 microbes, 18 isolates had the ability to produce polyhydroxybutyrate (PHB), which varied up to 500 mg/l of medium, equivalent to a yield of 66.6%. The highest PHB yield was recorded with B. cereus strain EGU3. Nine strains had high hydrolytic activities (zone of hydrolysis): lipase (34-38 mm) -Bacillus sphaericus strains EGU385, EGU399 and EGU542; protease (56-62 mm) -Bacillus sp. strains EGU444, EGU447 and EGU445; amylase (23 mm) -B. thuringiensis EGU378, marine bacterium strain EGU409 and Pseudomonas sp. strain EGU448. These strains with high hydrolytic activities had relatively low H(2) producing abilities in the range of 0.26-0.42 mol/mol of glucose added and only B. thuringiensis strain EGU378 had the ability to produce PHB. This is the first report among the non-photosynthetic microbes, where the same organism(s) -B. cereus strain EGU43 and B. thuringiensis strain EGU45, have been shown to produce H(2) - 0.63 mol/mol of glucose added and PHB - 420-435 mg/l medium.

Phylogeny vs genome reshuffling: horizontal gene transfer

The evolutionary events in organisms can be tracked to the transfer of genetic material. The inheritance of genetic material among closely related organisms is a slow evolutionary process. On the other hand, the movement of genes among distantly related species can account for rapid evolution. The later process has been quite evident in the appearance of antibiotic resistance genes among human and animal pathogens. Phylogenetic trees based on such genes and those involved in metabolic activities reflect the incongruencies in comparison to the 16S rDNA gene, generally used for taxonomic relationships. Such discrepancies in gene inheritance have been termed as horizontal gene transfer (HGT) events. In the post-genomic era, the explosion of known sequences through large-scale sequencing projects has unraveled the weakness of traditional 16S rDNA gene tree based evolutionary model. Various methods to scrutinize HGT events include atypical composition, abnormal sequence similarity, anomalous phylogenetic distribution, unusual phyletic patterns, etc. Since HGT generates greater genetic diversity, it is likely to increase resource use and ecosystem resilience.

Microbial diversity and genomics in aid of bioenergy

In view of the realization that fossil fuels reserves are limited, various options of generating energy are being explored. Biological methods for producing fuels such as ethanol, diesel, hydrogen (H2), methane, etc. have the potential to provide a sustainable energy system for the society. Biological H2 production appears to be the most promising as it is non-polluting and can be produced from water and biological wastes. The major limiting factors are low yields, lack of industrially robust organisms, and high cost of feed. Actually, H2 yields are lower than theoretically possible yields of 4 mol/mol of glucose because of the associated fermentation products such as lactic acid, propionic acid and ethanol. The efficiency of energy production can be improved by screening microbial diversity and easily fermentable feed materials. Biowastes can serve as feed for H2 production through a set of microbial consortia: (1) hydrolytic bacteria, (2) H2 producers (dark fermentative and photosynthetic). The efficiency of the bioconversion process may be enhanced further by the production of value added chemicals such as polydroxyalkanoate and anaerobic digestion. Discovery of enormous microbial diversity and sequencing of a wide range of organisms may enable us to realize genetic variability, identify organisms with natural ability to acquire and transmit genes. Such organisms can be exploited through genome shuffling for transgenic expression and efficient generation of clean fuel and other diverse biotechnological applications.

Microbial hydrogen production with Bacillus coagulans IIT-BT S1 isolated from anaerobic sewage sludge

Bacillus coagulans strain IIT-BT S1 isolated from anaerobically digested activated sewage sludge was investigated for its ability to produce H(2) from glucose-based medium under the influence of different environmental parameters. At mid-exponential phase of cell growth, H(2) production initiated and reached maximum production rate in the stationary phase. The maximal H(2) yield (2.28 mol H(2)/molglucose) was recorded at an initial glucose concentration of 2% (w/v), pH 6.5, temperature 37 degrees C, inoculum volume of 10% (v/v) and inoculum age of 14 h. Cell growth rate and rate of hydrogen production decreased when glucose concentration was elevated above 2% w/v, indicating substrate inhibition. The ability of the organism to utilize various carbon sources for H(2) fermentation was also determined.

Biohydrogen production in continuous-flow reactor using mixed microbial culture

The goal of the proposed project was to develop an anaerobic fermentation process that converts negative-value organic wastes into hydrogen-rich gas in a continuous-flow reactor under different operating conditions, such as hydraulic retention time (HRT), heat treatment, pH, and substrates. A series of batch tests were also conducted in parallel to the continuous study to evaluate the hydrogen conversion efficiency of two different organic substrates, namely sucrose and starch. A heat shock (at 90 degrees C for 15 minutes) was applied to the sludge in an external heating chamber known as a sludge activation chamber, as a method to impose a selection pressure to eliminate non-spore-forming, hydrogen-consuming bacteria and to activate spore germination. The experimental results showed that the heat activation of biomass enhanced hydrogen production by selecting for hydrogen-producing, spore-forming bacteria. The batch feeding at a shorter HRT of 20 hours (or higher organic loading rate) favored hydrogen production, whereas, at a longer HRT of 30 hours, methane was detected in the gas phase. The major organic acids of hydrogen fermentation were acetate, butyrate, and propionate. Up to 23.1% of influent chemical oxygen demand was consumed in biomass synthesis. Batch tests showed that the hydrogen-production potential of starch was lower than sucrose, and better conversion efficiency from starch was obtained at a lower pH of 4.5. However, addition of sucrose to starch improved the overall hydrogen-production potential and hydrogen-production rate. This study showed that sustainable biohydrogen production from carbohydrate-rich substrates is possible through heat activation of settled sludge.

Photoproduction of hydrogen from raw starch using a halophilic bacterial community

The bacterial community designated BC1, which originates from night soil treatment sludge, exhibited a strong ability to produce H2 from raw starch in the light in the presence of 3% NaC1. Three halophilic or halotolerant bacterial species, Vibrio fluvialis, Rhodobium marinum, and Proteus vulgaris, were isolated from BC1 and identified. The level of H2 production from starch by coculture of V. fluvialis and R. marinum was nearly equal to that by BC1, indicating that these two strains play roles in starch degradation and H2 production from the degraded products in BC1, respectively. Acetic acid and ethanol, which were detected as the major products of degradation of starch by V. fluvialis in pure culture, seemed to be mainly utilized for H2 production by R. marinum in BC1 and the coculture. However, R. marinum in pure culture could not produce H2 from a synthetic medium containing acetic acid and ethanol, suggesting that V. fluvialis supplied not only substrates but also some unknown factors capable of inducing H2 production from these substrates by R. marinum. A study using the starch-rich microalgae, Chlamydomonas reinhardtii and Dunaliella tertiolecta, demonstrated that the above coculture could be applied to the production of H2 at high yield from raw starch in an algal biomass.

H(2) production through anaerobic mixed culture: effect of batch S(0)/X(0) and shock loading in CSTR

Biological production of H(2) has received considerable attention lately. The present study was undertaken to observe the effects of substrate/seeding ratios (S(0)/X(0)) on batch H(2) generation. The H(2)-producing seeding spores were obtained from the heat treatment (88 degrees C for 12h) of the compost from a grass composting facility. A dehydrated brewery mixture was used as feed substrate. The results indicate that the pattern of the cumulative H(2) production with time is similar to the growth curve with a typical lag, exponential and stationary phase; the results were successfully modeled with a modified Gompertz equation. It appears that maximum H(2) yield potential (27ml g(-1)COD(added)) occurs at an S(0)/X(0) ratio of about 4, whereas the maximum specific H(2) yield (205ml g(-1) VSSd(-1)) occurs at approximately S(0)/X(0)=3. The S(0)/X(0) ratios higher than 4 would inhibit H(2) production. An attempt was made to waste a certain amount of reactor content and replaced it with fresh substrate in order to enhance H(2) production. After this medium replacement, the H(2) production was initially inhibited and the system then exhibited a long lag before it reached an active H(2) production stage. For a continuous-stirred tank-reactor (CSTR) system, the results of replacing 25% of the reactor content indicate that there is still a lag time before a sudden increase in H(2) production after the addition of the new substrate feed. The major low molecular weight acids identified are HAc and HBu with total volatile acids of about 6000-8000mg l(-1). The ratio of HAc/HBu in the present study is relatively constant (about 5) and appears not significantly affected by the medium replacement. The concentration of total alcohols is about 2000mg l(-1). All in all, the CSTR system is able to recover to its previous performance after such a dramatic 25% medium replacement.

H2-Producing bacterial communities from a heat-treated soil inoculum

Hydrogen gas (approximately 60% H(2)) was produced in a continuous flow bioreactor inoculated with heat-treated soil, and fed synthetic wastewater containing glucose (9.5 g l(-1)). The pH in the bioreactor was maintained at 5.5 to inhibit consumption of H(2) by methanogens. The objective of this study was to characterize bacterial communities in the reactor operated under two different hydraulic retention times (HRTs of 30-h and 10-h) and temperatures (30 degrees C and 37 degrees C). At 30-h HRT, the H(2) production rate was 80 ml h(-1) and yield was 0.91 mol H(2)/mol glucose. At 10-h HRT, the H(2) production rate was more than 5 times higher at 436 ml h(-1), and yield was 1.61 mol H(2)/mol glucose. Samples were removed from the reactor under steady-state conditions for PCR-based detection of bacterial populations by ribosomal intergenic spacer analysis (RISA). Populations detected at 30-h HRT were more diverse than at 10-h HRT and included representatives of Bacillaceae, Clostridiaceae, and Enterobacteriaceae. At 10-h HRT, only Clostridiaceae were detected. When the temperature of the 10-h HRT reactor was increased from 30 degrees C to 37 degrees C, the steady-state H(2) production rate increased slightly to 463 ml h(-1) and yield was 1.8 mol H(2)/mol glucose. Compared to 30 degrees C, RISA fingerprints at 37 degrees C from the 10-h HRT bioreactor exhibited a clear shift from populations related to Clostridium acidisoli (subcluster Ic) to populations related to Clostridium acetobutylicum (subcluster Ib).

Mining genomic databases to identify novel hydrogen producers

The realization that fossil fuel reserves are limited and their adverse effect on the environment has forced us to look into alternative sources of energy. Hydrogen is a strong contender as a future fuel. Biological hydrogen production ranges from 0.37 to 3.3 moles H(2) per mole of glucose and, considering the high theoretical values of production (4.0 moles H(2) per mole of glucose), it is worth exploring approaches to increase hydrogen yields. Screening the untapped microbial population is a promising possibility. Sequence analysis and pathway alignment of hydrogen metabolism in complete and incomplete genomes has led to the identification of potential hydrogen producers.

Microbial production of hydrogen: an overview

Production of hydrogen by anaerobes, facultative anaerobes, aerobes, methylotrophs, and photosynthetic bacteria is possible. Anaerobic Clostridia are potential producers and immobilized C. butyricum produces 2 mol H2/mol glucose at 50% efficiency. Spontaneous production of H2 from formate and glucose by immobilized Escherichia coli showed 100% and 60% efficiencies, respectively. Enterobactericiae produces H2 at similar efficiency from different monosaccharides during growth. Among methylotrophs, methanogenes, rumen bacteria, and thermophilic archae, Ruminococcus albus, is promising (2.37 mol/mol glucose). Immobilized aerobic Bacillus licheniformis optimally produces 0.7 mol H2/mol glucose. Photosynthetic Rhodospirillum rubrum produces 4, 7, and 6 mol of H2 from acetate, succinate, and malate, respectively. Excellent productivity (6.2 mol H2/mol glucose) by co-cultures of Cellulomonas with a hydrogenase uptake (Hup) mutant of R. capsulata on cellulose was found. Cyanobacteria, viz., Anabaena, Synechococcus, and Oscillatoria sp., have been studied for photoproduction of H2. Immobilized A. cylindrica produces H2 (20 ml/g dry wt/h) continually for 1 year. Increased H2 productivity was found for Hup mutant of A. variabilis. Synechococcus sp. has a high potential for H2 production in fermentors and outdoor cultures. Simultaneous productions of oxychemicals and H2 by Klebseilla sp. and by enzymatic methods were also attempted. The fate of H2 biotechnology is presumed to be dictated by the stock of fossil fuel and state of pollution in future.