Assignment of disulfide bonds in proteins by partial acid hydrolysis and mass spectrometry

Tracking internal and external ions for constrained peptides leads to enhanced sequence coverage and disulfide bond deciphering

Top-down characterization of disulfide-rich peptides and proteins presents many challenges due to the constrained and protected amino acid backbone. Typically, chemical reduction is required to reduce the disulfide bonds and/or enzymatic digestion (bottom-up analysis) is utilized to selectively cleave the amino acid sequence prior to mass spectrometry analysis owing to the challenges associated with intact, top-down analysis of these biomolecules. While extravagant top-down characterization techniques such as ultraviolet photodissociation (UVPD) or electron capture dissociation (ECD), have demonstrated the ability to break disulfide bonds in top-down workflows, implementation of these technologies and analysis of the resulting fragmentation spectra is not trivial and often inaccessible to many laboratories and users. In the study presented herein, traditional collision induced dissociation (CID) of disulfide-rich peptides is performed to confirm the disulfide bond connectivity and localize chemical modifications for these synthetic therapeutic peptides. While collisional activation does not fragment the peptide backbone linearly (typical N- and C-terminal fragment ions) within the disulfide-bonded regions, internal and external ions are consistently produced throughout the sequence via secondary fragmentation pathways. In this study, seven disulfide-rich peptides (Peptides A - G) with similar disulfide connectivity but varying amino acid composition were subjected to collisional activation for sequencing and disulfide bond confirmation. While only four linear b- and y-type fragment ions are produced for these peptides, fragmentation throughout the amino acid sequence is observed when searching for internal and external fragment ions. These ions are typically not considered during traditional top-down sequencing experiments due to the computational challenge of having an increased search space for fragment ion identification. Through the identification of reproducible internal and external fragment ions, site-specific modifications can also be localized, such as oxidation on the 18th residue in Peptide A. Ultimately, this observation and identification of internal and external ions simplifies the experimental process and wet-chemistry required to accurately depict the disulfide connectivity and the sequencing of these traditionally challenging biomolecules. Further consideration to these non-traditional fragment ions should be given during top-down intact peptide and protein analysis, especially when non-linear sequences are involved.

Experimental Assignment of Disulfide-Bonds in Purified Proteins

The formation of disulfide bonds in proteins is an important post-translational modification that is critical for stabilizing the native structures of proteins, particularly proteins exposed to oxidizing environments. For this reason, most cysteines in secreted proteins or protein domains on the surface of the cell are in disulfides, whereas most cysteines in the cytoplasm are in the unmodified -SH form. Disulfide linkages must be experimentally determined, as they cannot be predicted from amino acid sequence. These assignments provide insights into three-dimensional structure and contribute to the understanding of structural-functional relationships. This unit details a series of protocols that have been applied successfully to map disulfide bonds in proteins. The general strategy involves chemical or proteolytic cleavage of the protein followed by chromatographic separation of the resultant peptides. Mass spectrometry is used to identify disulfide-containing peptides and determine sites of disulfide linkage. A partial reduction and alkylation strategy for mapping disulfide linkages in peptides with multiple disulfide bonds is also presented. © 2019 by John Wiley & Sons, Inc.

The Nutraceutical Properties of Ovotransferrin and Its Potential Utilization as a Functional Food

Ovotransferrin or conalbumin belong to the transferrin protein family and is endowed with both iron-transfer and protective activities. In addition to its well-known antibacterial properties, ovotransferrin displays other protective roles similar to those already ascertained for the homologous mammalian lactoferrin. These additional functions, in many cases not directly related to iron binding, are also displayed by the peptides derived from partial hydrolysis of ovotransferrin, suggesting a direct relationship between egg consumption and human health.

Strategies in mass spectrometry for the assignment of Cys-Cys disulfide connectivities in proteins

Elucidating disulfide linkage patterns is a crucial part of protein characterization, for which mass spectrometry (MS) is now an indispensable analytical tool. In many cases, MS-based disulfide connectivity assignment is straightforwardly achieved using one-step protein fragmentation in the unreduced form followed by mass measurement of bridged fragments. By contrast, venom proteins, which are receiving increasing interest as potential therapeutics, are a challenge for MS-based disulfide assignment due to their numerous closely spaced cysteines and knotted disulfide structure, requiring creative strategies to determine their connectivity. Today, these include the use of an array of reagents for enzymatic and/or chemical cleavage, partial reduction, differential cysteine labeling and tandem MS. This review aims to describe the toolkit of techniques available to MS users approaching both straightforward and complex disulfide bridge assignments, with a particular focus on strategies utilizing standard instrumentation found in a well-equipped analytical or proteomics laboratory.

Quantification of protein modification by oxidants

Proteins are major targets for oxidative damage due to their abundance and rapid rates of reaction with a wide range of radicals and excited state species, such as singlet oxygen. Exposure of proteins to these oxidants results in loss of the parent amino acid residue, formation of unstable intermediates, and the generation of stable products. Each of these events can be used, to a greater or lesser extent, to quantify damage to proteins. In this review the advantages and disadvantages of a number of these approaches are discussed, with an emphasis on methods that yield absolute quantitative data on the extent of protein modification. Detailed methods sheets are provided for many of these techniques.

Development of an ion mobility quadrupole time of flight mass spectrometer

We describe here a new ion mobility capable mass spectrometer which comprises a drift cell for mobility separation and a quadrapole time of flight mass spectrometer for mass analysis--the MoQTOF. A commercial QToF instrument (Micromass UK Ltd., Manchester, UK) has been modified by the inclusion of an additional chamber containing a drift cell and ancillary ion optics. The drift cell is 5.1 cm long made from a copper block and is mounted from a top hat flange in a chamber situated post source optics and prior to the quadapole analyzer. Details of this instrument are provided along with information about how it can be used to acquire mobilities of ions along with their mass to charge ratios. The MoQTOF is used to examine conformations of a series of antimicrobial peptides based on a beta-defensin template. In vivo, these cationic cystine-rich amphiphilic peptides are conformationally restrained by three or more disulfide bridges, although recent findings by several groups have cast doubt on the importance of canonical disulfide pairing to antimicrobial activities. By synthesizing a panel of variants to Defb14 (the murine orthologue of HBD3), we exploit ion mobility to distinguish conformational differences which arise due to disulfide formation and to the hydrophobicity of the peptide sequence. Our gas-phase results are interpreted in terms of the antimicrobial and chemotacic properties of beta-defensins, and this mass spectrometry based approach to discern structure may have a role in future design of novel antibiotics.

‘Signature Sets', Minimal Fragment Sets for Identifying Protein Disulfide Structures with Cyanylation-Based Mass Mapping Methodology

Our cyanylation (CN)-based methodology for determining disulfide structure of cystinyl proteins overcomes the limitations of conventional proteolytic methods. However, the CN-based method has the potential drawback that occasionally some CN-induced cleavage fragments may not be detected. We show that CN-based methods can overcome the failure to detect fragments by demonstrating the existence of small 'signature sets' of fragments. The link between signature sets and the robustness of CN-based methodology is validated by two case studies.

Protein disulfide bond determination by mass spectrometry

The determination of disulfide bonds is an important aspect of gaining a comprehensive understanding of the chemical structure of a protein. The basic strategy for obtaining this information involves the identification of disulfide-linked peptides in digests of proteins and the characterization of their half-cystinyl peptide constituents. Tools for disulfide bond analysis have improved dramatically in the past two decades, especially in terms of speed and sensitivity. This improvement is largely due to the development of matrix-assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI), and complementary analyzers with high resolution and accuracy. The process of pairing half-cystinyl peptides is now generally achieved by comparing masses of non-reduced and reduced aliquots of a digest of a protein that was proteolyzed with intact disulfide bonds. Pepsin has favorable properties for generating disulfide-linked peptides, including its acidic pH optimum, at which disulfide bond rearrangement is precluded and protein conformations are likely to be unfolded and accessible to cleavage, and broad substrate specificity. These properties potentiate cleavage between all half-cystine residues of the substrate protein. However, pepsin produces complex digests that contain overlapping peptides due to ragged cleavage. This complexity can produce very complex spectra and/or hamper the ionization of some constituent peptides. It may also be more difficult to compute which half-cystinyl sequences of the protein of interest are disulfide-linked in non-reduced peptic digests. This ambiguity is offset to some extent by sequence tags that may arise from ragged cleavages and aid sequence assignments. Problems associated with pepsin cleavage can be minimized by digestion in solvents that contain 50% H(2) (18)O. Resultant disulfide-linked peptides have distinct isotope profiles (combinations of isotope ratios and average mass increases) compared to the same peptides with only (16)O in their terminal carboxylates. Thus, it is possible to identify disulfide-linked peptides in digests and chromatographic fractions, using these mass-specific markers, and to rationalize mass changes upon reduction in terms of half-cystinyl sequences of the protein of interest. Some peptides may require additional cleavages due to their multiple disulfide bond contents and/or tandem mass spectrometry (MS/MS) to determine linkages. Interpretation of the MS/MS spectra of peptides with multiple disulfides in supplementary digests is also facilitated by the presence of (18)O in their terminal carboxylates.

Aplysia attractin: biophysical characterization and modeling of a water-borne pheromone

Attractin, a 58-residue protein secreted by the mollusk Aplysia californica, stimulates sexually mature animals to approach egg cordons. Attractin from five different Aplysia species are approximately 40% identical in sequence. Recombinant attractin, expressed in insect cells and purified by reverse-phase high-performance liquid chromatography (RP-HPLC), is active in a bioassay using A. brasiliana; its circular dichroism (CD) spectrum indicates a predominantly alpha-helical structure. Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) characterization of proteolytic fragments identified disulfide bonds between the six conserved cysteines (I-VI, II-V, III-IV, where the Roman numeral indicates the order of occurrence in the primary sequence). Attractin has no significant similarity to any other sequence in the database. The protozoan Euplotes pheromones were selected by fold recognition as possible templates. These diverse proteins have three alpha-helices, with six cysteine residues disulfide-bonded in a different pattern from attractin. Model structures with good stereochemical parameters were prepared using the EXDIS/DIAMOD/FANTOM program suite and constraints based on sequence alignments with the Euplotes templates and the attractin disulfide bonds. A potential receptor-binding site is suggested based on these data. Future structural characterization of attractin will be needed to confirm these models.

Disulfide bond structure of the AVR9 elicitor of the fungal tomato pathogen Cladosporium fulvum: evidence for a cystine knot

Disease resistance in plants is commonly activated by the product of an avirulence (Avr) gene of a pathogen after interaction with the product of a matching resistance (R) gene in the host. In susceptible plants, Avr products might function as virulence or pathogenicity factors. The AVR9 elicitor from the fungus Cladosporium fulvum induces defense responses in tomato plants carrying the Cf-9 resistance gene. This 28-residue beta-sheet AVR9 peptide contains three disulfide bridges, which were identified in this study as Cys2-Cys16, Cys6-Cys19, and Cys12-Cys26. For this purpose, AVR9 was partially reduced, and the thiol groups of newly formed cysteines were modified to prevent reactions with disulfides. After HPLC purification, the partially reduced peptides were sequenced to determine the positions of the modified cysteines, which originated from the reduced disulfide bridge(s). All steps involving molecules with free thiol groups were performed at low pH to suppress disulfide scrambling. For that reason, cysteine modification by N-ethylmaleimide was preferred over modification by iodoacetamide. Upon (partial) reduction of native AVR9, the Cys2-Cys16 bridge opened selectively. The resulting molecule was further reduced to two one-bridge intermediates, which were subsequently completely reduced. The (partially) reduced cysteine-modified AVR9 species showed little or no necrosis-inducing activity, demonstrating the importance of the disulfide bridges for biological activity. Based on peptide length and cysteine spacing, it was previously suggested that AVR9 isa cystine-knotted peptide. Now, we have proven that the bridging pattern of AVR9 is indeed identical to that of cystine-knotted peptides. Moreover, NMR data obtained for AVR9 show that it is structurally closely related to the cystine-knotted carboxypeptidase inhibitor. However, AVR9 does not show any carboxypeptidase inhibiting activity, indicating that the cystine-knot fold is a commonly occurring motif with varying biological functions.

Ovotransferrin antimicrobial peptide (OTAP-92) kills bacteria through a membrane damage mechanism

Ovotransferrin antimicrobial peptide (OTAP-92) is a cationic fragment of hen ovotransferrin (OTf). OTAP-92 consists of 92 amino acid residues located within the 109-200 sequence of the N-lobe of OTf. This study was aimed to delineate the antimicrobial mechanism of OTAP-92 and to identify its interaction with bacterial membranes. OTAP-92 caused permeation of Escherichia coli outer membrane (OM) to 1-N-phenylnaphthylamine fluorescent probe in a dose-dependent manner. These results suggested that OTAP-92 crossed the bacterial OM by a self-promoted uptake. Cytoplasmic membrane of E. coli was found to be the target for OTAP-92 bactericidal activity, as assayed by the unmasking of cytoplasmic beta-galactosidase due to membrane permeabilization in a kinetic manner. Pretreatment of bacteria with uncoupler, carbonyl cyanide m-chlorophenylhydrazone, markedly enhanced permeation of cytoplasmic membrane, suggesting that the membrane permeation due to OTAP-92 is independent of the transmembrane potential. In an E. coli phospholipid liposome model, it was demonstrated that OTAP-92 has the ability to dissipate the transmembrane electrochemical potential. Intrinsic fluorescence spectra of the two tryptophan residues in OTAP-92, using liposomal membrane, have identified the lipid-binding region as a helix-sheet motif, and suggested an adjacent Ca(2+)-sensitive site within OTAP-92. These data indicated that OTAP-92 possesses a unique structural motif similar to the insect defensins. Further, this cationic antimicrobial peptide is capable of killing Gram-negative bacteria by crossing the OM by a self-promoted uptake and cause damage to the biological function of cytoplasmic membrane.

An unusual structural motif of antimicrobial peptides containing end-to-end macrocycle and cystine-knot disulfides

Four macrocyclic cystine-knot peptides of 29-31 residues, kalata, circulin A and B (CirA and CirB), and cyclopsychotride, have been isolated from coffee plants but have undetermined physiological functions. These macrocycles and 10 of their analogs prepared by chemical synthesis were tested against nine strains of microbes. Kalata and CirA were specific for the Gram-positive Staphylococcus aureus with a minimum inhibition concentration of approximately 0.2 microM. They were relatively ineffective against Gram-negative bacteria such as Escherichia coli and Pseudomonas aeruginosa. However, CirB and cyclopsychotride were active against both Gram-positive and Gram-negative bacteria. In particular, CirB showed potent activity against E. coli with a minimum inhibitory concentration of 0.41 microM. All four cyclic peptides were moderately active against two strains of fungi, Candida kefyr and Candida tropicalis, but were inactive against Candida albicans. These macrocycles are cytotoxic and lysed human red blood cell with a lethal dose 50% of 400 microM. Modifying the Arg residue in kalata with a keto aldehyde significantly reduced its activity against S. aureus whereas blocking the arg in CirA produced no significant effect. The two-disulfide variants and their scrambled disulfide isomers exhibited antimicrobial profiles and potency similar to their native peptides. However, in high-salt assays (100 mM NaCl), few of these macrocyclic peptides, natives or analogs, retained antimicrobial activity. These results show that the macrocyclic peptides possess specific and potent antimicrobial activity that is salt-dependent and that their initial interactions with the microbial surfaces may be electrostatic, an effect commonly found in defensin antimicrobial peptides. Furthermore, their end-to-end cyclic structure with a cystine-knot motif represents a molecular structure of antimicrobials and may provide a useful template for the design of novel peptide antibiotics.

Comparison of SH3 and SH2 domain dynamics when expressed alone or in an SH(3+2) construct: the role of protein dynamics in functional regulation

Protein dynamics play an important role in protein function and regulation of enzymatic activity. To determine how additional interactions with surrounding structure affects local protein dynamics, we have used hydrogen exchange and mass spectrometry to investigate the SH2 and SH3 domains of the protein tyrosine kinase Hck. Exchange rates of isolated Hck SH3 and SH2 domains were compared with rates for the same domains when part of a larger SH(3+2) construct. Increased deuterium incorporation was observed for the SH3 domain in the joint construct, particularly near the SH2 interface and the short sequence that connects SH3 to SH2, implying greater flexibility of SH3 when it is part of SH(3+2). Slow cooperative unfolding of the SH3 domain occurred at the same rate in isolated SH3 as in the SH(3+2) construct, suggesting a functional significance for this unfolding. The SH2 domain displayed relatively smaller changes in flexibility when part of the SH(3+2) construct. These results suggest that the domains influence each other. Further, our results imply a link between functional regulation and structural dynamics of SH3 and SH2 domains.

Assignment of the three disulfide bonds of Selenocosmia huwena lectin-I from the venom of spider Selenocosmia huwena

The positions of the disulfide bonds of Selenocosmia huwena lectin-I (SHL-I) from the venom of the Chinese bird spider S. huwena have been determined. The existence of three disulfide bonds in the native SHL-I was proved by matrix-assisted laser desorption ionization time-of-flight mass spectroscopic analysis. To map the disulfide bonds, native SHL-I was proteolytically digested. The resulting peptides were separated by reverse phase high-performance liquid chromatography. Matrix-assisted laser desorption ionization time-of-flight mass spectroscopic analysis indicated the presence of one disulfide bond Cys7-Cys19. The partially reduced peptides by using Tris-(2-carboxyethyl)-phosphine at pH 3.0 were purified by reverse phase high-performance liquid chromatography. Four M Guanidine-HCl was found to increase the yields of partially reduced peptides prominently. The free thiols were carboxamidomethlate by iodoacetamide. The specific location of another disulfide bond Cys2-Cys14 was proved by comparing N-terminal sequencing analysis of the partially reduced and alkylated SHL-I with that of the intact peptide. Finally, the three disulfide linkage of SHL-I could be assigned as Cys2-Cys14, Cys7-Cys19, Cys13-Cys26.

A biomimetic strategy in the synthesis and fragmentation of cyclic protein

This paper describes a simple biomimetic strategy to prepare small cyclic proteins containing multiple disulfide bonds. Our strategy involves intramolecular acyl transfer reactions to assist both the synthesis and fragmentation of these highly constrained cyclic structures in aqueous solution. To illustrate our strategy, we synthesized the naturally occurring circulin B and cyclopsychotride (CPT), both consisting of 31 amino acid residues tightly packed in a cystine-knot motif with three disulfide bonds and an end-to-end cyclic form. The synthesis of these small cyclic proteins can be achieved by orthogonal ligation of free peptide thioester via the thia zip reaction, which involves a series of reversible thiol-thiolactone exchanges to arrive at an alpha-amino thiolactone, which then undergoes an irreversible, spontaneous ring contraction through an S,N-acyl migration to form the cyclic protein. A two-step disulfide formation strategy is employed for obtaining the desired disulfide-paired products. Partial acid hydrolysis through intramolecular acyl transfer of X-Ser, X-Thr, Asp-X, and Glu-X sequences is used to obtain the assignment of the circulins disulfide bond connectives. Both synthetic circulin B and CPT are identical to the natural products and, thus, the total synthesis confirms the disulfide connectivity of circulin B and CPT contain a cystine-knot motif of 1-4, 2-5, and 3-6. In general, our strategy, based on the convergence of chemical proteolysis and aminolysis of peptide bonds through acyl transfer, is biomimetic and provides a useful approach for the synthesis and characterization of large end-to-end cyclic peptides and small proteins.

Identification of a distinct antibacterial domain within the N-lobe of ovotransferrin

We have evaluated the bactericidal activity of hen ovotransferrin (OTf), which was found to operate regardless of its iron-deprivation properties, with the objective of isolating the bactericidal domain. The amino-terminal half-molecule (N-lobe, residues 1-332) of OTf, isolated by trypsin-nicking, retained the bactericidal activity independently of iron-deprivation, but not the carboxyl-terminal half-molecule (C-lobe, residue 342-686), suggesting the presence of a bactericidal domain within the N-lobe of the molecule. Specific cleavage at the aspartyl residues of OTf, by diluted-acid procedure, yielded fairly large peptides, whereas proteolysis for 150 min produced the strongest bactericidal peptides mixture. The bactericidal domain was purified from the active hydrolysate by gel filtration and reversed-phase HPLC and showed activity against S. aureus as well as E. coli K-12. Electrophoretic analysis on tricine-SDS-PAGE revealed a bactericidal peptide with an average M(r) of 9900 Da under non-reducing conditions. In combination with the specificity of cleavage (Asp-X) and the molecular mass, its N-terminal microsequencing corresponded to a cationic peptide consisting of 92 residues located within the 109-200 sequence of the N-lobe of OTf, containing three intrachain disulfide bridges, featuring a common structural motif occurs in the N-lobes of transferrins for which the sequence is available. Two of the disulfides (C160-C174 and C171-C182) form surface exposed cringle bridges lying on the opposite side of the iron-binding site from the interdomain cleft and showing marked sequence homology to insect defensins, which are blockers of the voltage-dependent K+ channels. The peptide lost antibacterial activity when its disulfide bonds were reduced, indicating the importance of its tertiary structure for the exertion of antibiotic activity.

Identification and localization of slow, natural, cooperative unfolding in the hematopoietic cell kinase SH3 domain by amide hydrogen exchange and mass spectrometry

Protein unfolding on a fast time scale (milliseconds-minutes) has been widely reported, but slower unfolding events (10 min-hours) have received less attention. Amide hydrogen exchange (HX) and mass spectrometry (MS) were used to investigate the unfolding dynamics of the hematopoietic cell kinase (Hck) SH3 domain. Analysis of mass spectra after deuterium exchange into intact Hck SH3 indicates a cooperative unfolding event involving 24-61% of the domain and occurring with a half-life of approximately 20 min under physiological conditions. To identify the unfolding region, SH3 was incubated in D2O and proteolytically fragmented into peptides that were analyzed by mass spectrometry. Correlation of HX rates and isotope patterns reveals cooperative unfolding in several regions, including the C-terminal half of the RT-loop and a beta-sheet flanking the binding site. Binding of a prolyl-rich segment from the HIV Nef protein slows unfolding by a factor of 3. Further analysis yields a KD of 25 microM for the Nef peptide. These results demonstrate that an inherent flexibility in the SH3 domain may assist interconversion of the closed, intramolecularly ligated state and the open, active state of Src family kinases. Furthermore, this type of previously undetectable, slow unfolding process may provide the basis for new mechanisms in which kinetics of local unfolding combines with thermodynamics to regulate enzymatic activity. The combination of hydrogen exchange and mass spectrometry appears to be the only general method capable of examining these slow unfolding processes.

A novel methodology for assignment of disulfide bond pairings in proteins

A novel methodology is described for the assignment of disulfide bonds in proteins of known sequence. The denatured protein is subjected to limited reduction by tris(2-carboxyethyl)phosphine (TCEP) in pH 3.0 citrate buffer to produce a mixture of partially reduced protein isomers; the nascent sulfhydryls are immediately cyanylated by 1-cyano-4-dimethylamino-pyridinium tetrafluoroborate (CDAP) under the same buffered conditions. The cyanylated protein isomers, separated by and collected from reversed-phase HPLC, are subjected to cleavage of the peptide bonds on the N-terminal side of cyanylated cysteines in aqueous ammonia to form truncated peptides that are still linked by residual disulfide bonds. The remaining disulfide bonds are then completely reduced to give a mixture of peptides that can be mass mapped by MALDI-MS. The masses of the resulting peptide fragments are related to the location of the paired cysteines that had undergone reduction, cyanylation, and cleavage. A side reaction, beta-elimination, often accompanies cleavage and produces overlapped peptides that provide complementary confirmation for the assignment. This strategy minimizes disulfide bond scrambling and is simple, fast, and sensitive. The feasibility of the new approach is demonstrated in the analysis of model proteins that contain various disulfide bond linkages, including adjacent cysteines. Experimental conditions are optimized for protein partial reduction, sulfhydryl cyanylation, and chemical cleavage reactions.

The sequence of human betaB1-crystallin cDNA allows mass spectrometric detection of betaB1 protein missing portions of its N-terminal extension

The sequence of human betaB1-crystallin cDNA encoded a protein of 251 amino acids in length. Mass spectrometric analysis of intact betaB1 from young human lens confirmed the deduced amino acid sequence. Lenses of human donors newborn to 27 years of age also contained partially degraded forms of betaB1 missing 15, 33, 34, 35, 36, 39, 40, and 41 amino acid residues from their N-terminal extensions. The similarity of the cleavage site between residues 15 and 16 in human betaB1 to the cleavage occurring in bovine betaB1 suggested that lenses of both species may contain a similar proteolytic activity. The remaining cleavage sites occurring in human betaB1 did not closely match those occurring in other species, possibly due to the widely divergent amino acid sequence of the N-terminal extension of betaB1 amoung species. Results from animal models suggest that cleavage of the N-terminal extension of betaB1-crystallin could enhance protein insolubilization and cataract in lens. However, the presence of partially degraded betaB1-crystallins in both water-soluble and water-insoluble fractions of lenses of young donors suggested that the rate that proteolyzed betaB1-crystallins become water-insoluble is relatively slow in humans.

Amide hydrogen exchange determined by mass spectrometry: application to rabbit muscle aldolase

The protein fragmentation/mass spectrometry method described by Zhang and Smith [(1993) Protein Sci. 2, 522-531] has been extended to measure amide hydrogen exchange rates in rabbit muscle aldolase, a homotetramer with M(r) = 157,000. Following a period of deuterium exchange, the partially deuterated protein was proteolytically fragmented into peptides whose deuterium contents were determined by directly coupled HPLC fast atom bombardment mass spectrometry. Hydrogen exchange rates were determined for amide hydrogens located in short segments derived from 85% of the aldolase backbone. Isotopic exchange rate constants spanning the range from 100 to 0.001 h-1 were determined for the exchange-in times used in this study (2.5 min to 44 h). The exchange rates for amide hydrogens located within short segments differed by as much as 10(4), demonstrating that local structural features dramatically affect the isotopic exchange rates in large proteins. A high level of correlation between the slowing of hydrogen exchange and intramolecular hydrogen bonding in aldolase was found. An exception to this correlation occurs at the subunit interface, where the amide hydrogens in one peptide segment with few amide hydrogen bonds have slower exchange rates than expected, suggesting that the amide hydrogens in this region are effectively shielded from the deuterated solvent. Isotope patterns observed for most peptides were binomial, indicating that hydrogen exchange proceeds through the EX2 mechanism (uncorrelated exchange). However, bimodal isotope patterns were found for peptides derived from three short segments of aldolase (including residues 58-64, 279-283, and 326-337), suggesting structural differences in these regions. A high level of correlation was found between crystallographic B-factors and amide hydrogen exchange rates, suggesting an isotopic exchange mechanism involving localized low-amplitude, high-frequency motions that do not require collective motion of many residues. From a methodology viewpoint, these results demonstrate that the combination of protein fragmentation with mass spectrometry is a useful method for determining the rates at which amide hydrogens located over major portions of large proteins undergo isotopic exchange.

Glutathione adducts, not carbamylated lysines, are the major modification of lens alpha-crystallins from renal failure patients

alpha-Crystallins from the water-soluble and the water-insoluble, guanidine-soluble portions of lenses from four renal failure patients and two normal donors of similar age were isolated and enzymatically digested into peptides. Molecular weights of the peptides, determined by fast atom bombardment mass spectrometry, indicated modifications specifically associated with renal failure. The only modifications observed in the alpha-crystallins from renal failure patients, but not in the normal old lenses, were glutathione adducts to Cys 131 and Cys 142. These adducts were present in the lenses of all four renal failure patients, but not in the two normal old lenses. The four lenses from the renal failure patients were searched for evidence of carbamylation at lysyl or cysteinyl residues: carbamylation was not detected. Because the same mass spectrometric methods had previously demonstrated sufficient sensitivity and specificity to detect as little as 5% modification in the examination of in vitro carbamylated bovine lenses, these results indicated that carbamylation is not a major modification of the lens alpha-crystallins of renal failure patients.

Assignment of all four disulfide bridges in echistatin

Echistatin is a 49-amino-acid protein from Echis carinatus venom. It contains four disulfide bonds. Since the disulfide bonding is critical for biological activity; it is very important to assign the disulfide linkage in this protein. Echistatin was incubated in 250 mM oxalic acid at 100 degrees C for 4 hr under nitrogen. Under these conditions, many overlapping disulfide-containing peptides were identified by ionspray mass spectrometry. Ionspray MS/MS data indicate that the four disulfide bonds are Cys 2-Cys 11, Cys 7-Cys 32, Cys 8-Cys 37, and Cys 20-Cys 39. To our knowledge, this is the first time all four disulfide bonds in echistatin have been assigned in one experiment without disulfide bond exchange. This approach, which combines oxalic acid hydrolysis and ionspray MS/MS, may be very useful for assigning disulfide bridges in other proteins from the disintegrin family.

Mass spectrometric analysis of the structure of gamma II bovine lens crystallin

The amino acid sequence of bovine gamma II-crystallin has been verified by a combination of electrospray and fast atom bombardment mass spectrometry. The molecular weight of gamma II, isolated by gel filtration and ion exchange chromatography, was determined to be 20,967 +/- 3 by electrospray mass spectrometry. Another aliquot of gamma II was completely digested by trypsin in a medium of 20% CH3CN and 0.1 M Tris, pH 8.2. The tryptic peptides were separated by reversed phase HPLC and identified by their molecular weights, as determined by fast atom bombardment mass spectrometry (FABMS). The identification of each peptide was confirmed by digesting the peptide further to give new peptides whose molecular weights were also determined by FABMS and related to the proposed amino acid sequences. The data from both types of mass spectrometric analyses were consistent with the sequence previously proposed by Hay et al. (J. Biol. Chem. 1987, 146, 332-338), including threonine at position 119. The FAB mass spectrum of one HPLC fraction suggested that disulfide bonding between Cys 18 and Cys 22 was present in at least half the protein preparation. Whether the Cys 18/Cys 22 disulfide bond was present in native gamma II or was produced during isolation or enzymic digestion could not be determined from these studies. Samples that had been stored for several weeks showed that several of the cysteines had become disulfide bonded. These studies illustrate the power of mass spectrometric techniques to accurately confirm the primary structure of proteins and to identify post-translational modifications.

Location of disulfide bonds in antithrombin III

Proteolytic digests of human antithrombin III (ATIII) have been analyzed by a combination of reversed-phase high-performance liquid chromatography and fast atom bombardment (FAB) mass spectrometry for disulfide-containing peptides which are diagnostic for disulfide linkages in ATIII. These results indicate that disulfide bonds join Cys 8 and Cys 128, Cys 21 and Cys 95, and Cys 247 and Cys 430. In addition, these results demonstrate that systematic searches of the amino acid sequence of a large protein for segments with molecular weights matching FAB mass spectral information is a viable method for identifying peptides independent of the specificity of the enzyme used to fragment the protein.