Modulation of membrane surface curvature by peptide-lipid interactions

A thiolate-bridged FeIVFeIV μ-nitrido complex and its hydrogenation reactivity toward ammonia formation

Iron nitrides are key intermediates in biological nitrogen fixation and the industrial Haber-Bosch process, used to form ammonia from dinitrogen. However, the proposed successive conversion of nitride to ammonia remains elusive. In this regard, the search for well-described multi-iron nitrido model complexes and investigations on controlling their reactivity towards ammonia formation have long been of great challenge and importance. Here we report a well-defined thiolate-bridged Fe^IVFe^IV μ-nitrido complex featuring an uncommon bent Fe-N-Fe moiety. Remarkably, this complex shows excellent reactivity toward hydrogenation with H₂ at ambient conditions, forming ammonia in high yield. Combined experimental and computational studies demonstrate that a thiolate-bridged Fe^IIIFe^III μ-amido complex is a key intermediate, which is generated through an unusual two-electron oxidation of H₂. Moreover, ammonia production was also realized by treating this diiron μ-nitride with electrons and water as a proton source.

Induction of non-lamellar lipid phases by antimicrobial peptides: a potential link to mode of action

Antimicrobial peptides are naturally produced by numerous organisms including insects, plants and mammals. Their non-specific mode of action is thought to involve the transient perturbation of bacterial membranes but the molecular mechanism underlying the rearrangement of the lipid molecules to explain the formation of pores and micelles is still poorly understood. Biological membranes mostly adopt planar lipid bilayers; however, antimicrobial peptides have been shown to induce non-lamellar lipid phases which may be intimately linked to their proposed mechanisms of action. This paper reviews antimicrobial peptides that alter lipid phase behavior in three ways: peptides that induce positive membrane curvature, peptides that induce negative membrane curvature and peptides that induce cubic lipid phases. Such structures can coexist with the bilayer structure, thus giving rise to lipid polymorphism induced upon addition of antimicrobial peptides. The discussion addresses the implications of induced lipid phases for the mode of action of various antimicrobial peptides.

Deletion of the chloroplast-localized AtTerC gene product in Arabidopsis thaliana leads to loss of the thylakoid membrane and to seedling lethality

Early seedling development in plants depends on the biogenesis of chloroplasts from proplastids, accompanied by the formation of thylakoid membranes. An Arabidopsis thaliana gene, AtTerC, whose gene product shares sequence similarity with bacterial tellurite resistance C (TerC), is shown to be involved in a critical step required for the normal organization of prothylakoids and transition into mature thylakoid stacks. The AtTerC gene encodes an integral membrane protein, which contains eight putative transmembrane helices, localized in the thylakoid of the chloroplast, as shown by localization of an AtTerC-GFP fusion product in protoplasts and by immunoblot analysis of subfractions of chloroplasts. T-DNA insertional mutation of AtTerC resulted in a pigment-deficient and seedling-lethal phenotype under normal light conditions. Transmission electron microscopic analysis revealed that mutant etioplasts had normal prolamellar bodies (PLBs), although the prothylakoids had ring-like shapes surrounding the PLBs. In addition, the ultrastructures of mutant chloroplasts lacked thylakoids, did not have grana stacks, and showed numerous globular structures of varying sizes. Also, the accumulation of thylakoid membrane proteins was severely defective in this mutant. These results suggest that the AtTerC protein plays a crucial role in prothylakoid membrane biogenesis and thylakoid formation in early chloroplast development.

New GHK hydrophobic derivatives: Interaction with phospholipid bilayers

Three hydrophobic derivatives of GHK peptide containing either N-terminal hexanoyl, decanoyl or myristoyl acyl moieties were synthesized. The binding of these peptidolipids to phospholipid bilayers as well as their hemolytic activity were determined. Moreover, the influence of these peptidolipids on several physicochemical properties of liposomes was studied. Binding experiments indicate a high affinity of these peptidolipids for lipids ordered in liposomes. Nevertheless, this interaction does not promote the release of entrapped carboxyfluorescein. Experiments carried out by the asymmetric membrane method (NBD-PE/dithionite) and quenching studies (PC-pyrene/KI) indicate that this association has a protective effect suggesting that the hydrophobic moiety inserts in the external part of the bilayer and the peptide chain remains protruding from the surface hindering the entrance or the approach of reactants to it. The microviscosity of DPPC bilayers determined using TMA-DPH as fluorescent marker was not affected by the presence of peptidolipids. Besides, results indicate that myristoyl-GHK produces total hemolysis at 2.5x10(-4)M but decanoyl and hexanoyl derivatives at 5x10(-4)M induce only 10% of hemolysis.

Interaction of three-finger toxins with phospholipid membranes: comparison of S- and P-type cytotoxins

The CTs (cytotoxins) I and II are positively charged three-finger folded proteins from venom of Naja oxiana (the Central Asian cobra). They belong to S- and P-type respectively based on Ser-28 and Pro-30 residues within a putative phospholipid bilayer binding site. Previously, we investigated the interaction of CTII with multilamellar liposomes of dipalmitoylphosphatidylglycerol by wide-line (31)P-NMR spectroscopy. To compare interactions of these proteins with phospholipids, we investigated the interaction of CTI with the multilamellar liposomes of dipalmitoylphosphatidylglycerol analogously. The effect of CTI on the chemical shielding anisotropy and deformation of the liposomes in the magnetic field was determined at different temperatures and lipid/protein ratios. It was found that both the proteins do not affect lipid organization in the gel state. In the liquid crystalline state of the bilayer they disturb lipid packing. To get insight into the interactions of the toxins with membranes, Monte Carlo simulations of CTI and CTII in the presence of the bilayer membrane were performed. It was found that both the toxins penetrate into the bilayer with the tips of all the three loops. However, the free-energy gain on membrane insertion of CTI is smaller (by approximately 7 kcal/mol; 1 kcal identical with 4.184 kJ) when compared with CTII, because of the lower hydrophobicity of the membrane-binding site of CTI. These results clearly demonstrate that the P-type cytotoxins interact with membranes stronger than those of the S-type, although the mode of the membrane insertion is similar for both the types.

Dissection of Antibacterial and Toxic Activity of Melittin

Melittin, a naturally occurring antimicrobial peptide, exhibits strong lytic activity against both eukaryotic and prokaryotic cells. Despite a tremendous amount of work done, very little is known about the amino acid sequence, which regulates its toxic activity. With the goal of understanding the basis of toxic activity and poor cell selectivity in melittin, a leucine zipper motif has been identified. To evaluate the possible structural and functional roles of this motif, melittin and its two analogs, after substituting the heptadic leucine by alanine, were synthesized and characterized. Functional studies indicated that alanine substitution in the leucine zipper motif resulted in a drastic reduction of the hemolytic activity of melittin. However, interestingly, both the designed analogs exhibited antibacterial activity comparable to melittin. Mutations caused a significant decrease in the membrane permeability of melittin in zwitterionic but not in negatively charged lipid vesicles. Although both the analogs exhibited similar secondary structures in the presence of negatively charged lipid vesicles as melittin, they failed to adopt a significant helical structure in the presence of zwitterionic lipid vesicles. Results suggest that the substitution of heptadic leucine by alanine impaired the assembly of melittin in an aqueous environment and its localization only in zwitterionic but not in negatively charged membrane. Altogether, the results suggest the identification of a structural element in melittin, which probably plays a prominent role in regulating its toxicity but not antibacterial activity. The results indicate that cell selectivity in some antimicrobial peptides can probably be introduced by modulating their assembly in an aqueous environment.

General aspects of peptide selectivity towards lipid bilayers and cell membranes studied by variation of the structural parameters of amphipathic helical model peptides

Model compounds of modified hydrophobicity (Eta), hydrophobic moment (mu) and angle subtended by charged residues (Phi) were synthesized to define the general roles of structural motifs of cationic helical peptides for membrane activity and selectivity. The peptide sets were based on a highly hydrophobic, non-selective KLA model peptide with high antimicrobial and hemolytic activity. Variation of the investigated parameters was found to be a suitable method for modifying peptide selectivity towards either neutral or highly negatively charged lipid bilayers. Eta and mu influenced selectivity preferentially via modification of activity on 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC) bilayers, while the size of the polar/hydrophobic angle affected the activity against 1-palmitoyl-2-oleoylphosphatidyl-DL-glycerol (POPG). The influence of the parameters on the activity determining step was modest in both lipid systems and the activity profiles were the result of the parameters' influence on the second less pronounced permeabilization step. Thus, the activity towards POPC vesicles was determined by the high permeabilizing efficiency, however, changes in the structural parameters preferentially influenced the relatively moderate affinity. In contrast, intensive peptide accumulation via electrostatic interactions was sufficient for the destabilization of highly negatively charged POPG lipid membranes, but changes in the activity profile, as revealed by the modification of Phi, seem to be preferentially caused by variation of the low permeabilizing efficiency. The parameters proved very effective also in modifying antimicrobial and hemolytic activity. However, their influence on cell selectivity was limited. A threshold value of hydrophobicity seems to exist which restricted the activity modifying potential of mu and Phi on both lipid bilayers and cell membranes.

The lipid charge density at the bilayer surface modulates the effects of melittin on membranes

The influence of melittin on two DMPA membrane systems at pH 4.2 and 8.2 has been investigated by solid-state 31P and 2H NMR, as a function of temperature and peptide concentration. Melittin promotes greater morphological changes for both systems in the fluid phase, the effect being larger at pH 4.2. Close inspection of fatty acyl chain dynamics suggests that some parallels can be drawn between the DMPA/melittin at pH 8.2 and PC/melittin systems. In addition, at pH 8.2 a direct neutralization at the interface of one of the lipid negative charges by a positive charge of the peptide occurs, as can be monitored by 31P NMR at the molecular level. For the system at pH 4.2 and at high temperature, a lipid-to-peptide molar ratio of 30 is sufficient to transform the whole system into an isotropic phase, proposed to be inverted micelles. When the system is cooled down towards the gel phase one observes an intermediate hexagonal phase in a narrow range of temperature.

Mass spectrometry to characterize the binding of a peptide to a lipid surface

The binding of an amphipathic alpha-helical peptide to small unilamellar lipid vesicles has been examined using chemical derivitization and mass spectrometry. The peptide is derived from the sequence of human apolipoprotein C-II (apoC-II), the protein activator of lipoprotein lipase (LpL). ApoC-II(19-39) forms approximately 60% alpha-helix upon binding to model egg yolk phosphatidylcholine small unilamellar vesicles. Measurement of the affinity of the peptide for lipid by spectrophotometric methods is complicated by the contribution of scattered light to optical signals. Instead, we characterize the binding event using the differential labeling of lysine residues by the lipid- and aqueous-phase cross-linkers, disuccinimidyl suberate (DSS) and bis(sulfosuccinimidyl) suberate (BS(3)), respectively. In aqueous solution, the three lysine residues of the peptide are accessible to both cross-linkers. In the presence of lipid, the C-terminal lysine residue becomes inaccessible to the lipid-phase cross-linker DSS, but remains accessible to the aqueous-phase cross-linker, BS(3). We use mass spectrometry to characterize this binding event and to derive a dissociation constant for the interaction (K(d) = 5 microM). We also provide evidence for the formation of dimeric cross-linked peptide when high densities of peptide are bound to the lipid surface.

Nisin promotes the formation of non-lamellar inverted phases in unsaturated phosphatidylethanolamines

Nisin, a peptide used as a food preservative, is shown, by 31P-nuclear magnetic resonance and infrared spectroscopy, to perturb the structure of membranes formed of unsaturated phosphatidylethanolamine (PE) and to induce the formation of inverted non-lamellar phases. In the case of dioleoyl-sn-glycero-3-phosphatidylethanolamine (DOPE), nisin promotes the formation of inverted hexagonal phase. Similarly, the peptide induces the formation of an isotropic phase, most likely a cubic phase, with 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylethanolamine (POPE). It is proposed that the insertion of the peptide in the bilayer shifts the amphiphilic balance by increasing the hydrophobic contribution and is at the origin of the changes in the polymorphic propensities of PE. This is supported by the fact that the presence of cholesterol in the PE bilayer inhibits the power of nisin to perturb the membrane structure, most likely because the peptide insertion is difficult in the fluid ordered phase. This finding provides insight into possible antibacterial mechanisms of nisin.

Orientation of the pore-forming peptide GALA in POPC vesicles determined by a BODIPY-avidin/biotin binding assay

We determined the orientation of a biotinylated version of the pore-forming peptide GALA (WEAALAEALAEALAEHLAEALAEALEALAA) at pH 5.0 in large unilamellar phosphatidylcholine vesicles, using the enhancement of BODIPY-avidin fluorescence subsequent to its irreversible binding to a biotin moiety. GALA and its variants were biotinylated at the N- or C-terminus. BODIPY-avidin was either added externally or was pre-encapsulated in vesicles to assess the fraction of liposome-bound biotinylated GALA that exposed its labeled terminus to the external or internal side of the bilayer, respectively. Under conditions where most of the membrane-bound peptides were involved in transmembrane aggregates and formed aqueous pores (at a lipid/bound peptide molar ratio of 2500/1), the head-to-tail (N- to C-terminus) orientation of the membrane-inserted peptides was such that 3/4 of the peptides exposed their N-terminus on the inside of the vesicle and their C-terminus on the outside. Under conditions resulting in reduced pore formation (at higher lipid/peptide molar ratios), we observed an increase in the fraction of GALA termini exposed to the outside of the vesicle. These results are consistent with a model (Parente et al., Biochemistry, 29:8720, 1990) that requires a critical number of peptides (M) in an aggregate to form a transbilayer structure. When the peptides form an aggregate of size i, with i < M = 4 to 6, the orientation of the peptides is mostly parallel to the membrane surface, such that both termini of the biotinylated peptide are exposed to external BODIPY-avidin. This BODIPY-avidin/biotin binding assay should be useful to determine the orientation of other membrane-interacting molecules.

The structure of the antimicrobial active center of lactoferricin B bound to sodium dodecyl sulfate micelles

Lactoferricin B (LfcinB) is a 25-residue antimicrobial peptide released from bovine lactoferrin upon pepsin digestion. The antimicrobial center of LfcinB consists of six residues (RRWQWR-NH2), and it possesses similar bactericidal activity to LfcinB. The structure of the six-residue peptide bound to sodium dodecyl sulfate (SDS) micelles has been determined by NMR spectroscopy and molecular dynamics refinement. The peptide adopts a well defined amphipathic structure when bound to SDS micelles with the Trp sidechains separated from the Arg residues. Additional evidence demonstrates that the peptide is oriented in the micelle such that the Trp residues are more deeply buried in the micelle than the Arg and Gln residues.

Study of vesicle leakage induced by melittin

The leakage induced by melittin, a membrane-perturbing amphipathic peptide, from large unilamellar 1-palmitoyl-2-oleoylphosphatidylcholine (POPC) vesicles was studied using calcein as fluorescent marker. The extent of leakage has been found to be regulated by the melittin/lipid molar ratio. Melittin leads to the complete release of trapped calcein from some vesicles. This all-or-none mechanism leads to the co-existence of two different vesicle populations: the 'empty' and the intact one. Intervesicular migration of melittin was not observed. The results reveal a specific targeting of the lysed vesicles by melittin. The presence of negatively charged lipids (unprotonated palmitic acid or 1-palmitoyl-2-oleoylphosphatidylglycerol) in the neutral POPC matrix inhibits the lytic power of melittin; this inhibition increases with increasing surface charge density. It is proposed that the anchorage of the peptide on the charged surface prevents the formation of defects allowing leakage. A statistical model based on a random distribution of the peptide molecules on the vesicles is proposed to describe the release induced by melittin. It is proposed that about 250 melittin molecules per vesicle are required to affect the bilayer permeability and to empty a vesicle of its content. This large number suggests that leakage is more likely due to collective membrane perturbation by the peptide rather than to the formation of a well-defined pore.

Action of melittin on the DPPC-cholesterol liquid-ordered phase: a solid state 2H-and 31P-NMR study

Solid-state deuterium and phosphorus-31 nuclear magnetic resonance studies of deuterium-labeled beta--[2,2',3,4,4',6-2H6]-cholesterol and 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine have been undertaken to monitor the action of melittin on model membranes containing 30 mol% cholesterol, both at the molecular and macroscopic level. Cholesterol totally inhibits the toxin-triggered formation of large unilamellar vesicles and strongly restricts the appearance of small discs. The latter remain stable over a wide temperature range (20-60 degrees C) because of an increase in their cholesterol content as the temperature increases. This process is related to a constant disc hydrophobic thickness of approximately 29 A. The system, when not in the form of discs, appears to be composed of very large vesicles on which melittin promotes magnetically induced ellipsoidal deformation. This deformation is the greatest when the maximum of discs is observed. A model to describe both the disc formation and stability is proposed.

Circular-dichroism and fluorescence studies on melittin: effects of C-terminal modifications on tetramer formation and binding to phospholipid vesicles

Studies were performed on a series of melittin analogues with selective alterations to the positively charged amino acid sequence at the C-terminus. Fluorescence studies were undertaken using the sole tryptophan residue in the analogues as an intrinsic fluorescence probe for indications of tetramer formation in free solution, and binding and insertion of the melittins into phospholipid bilayers. Studies were performed under conditions of low-salt buffer with increasing concentrations of phosphate added to promote self-association of the melittin monomers, and also in the presence of phospholipid vesicles. C.d. studies were also performed under conditions of increasing phosphate concentrations and in the presence of lipid vesicles to monitor the alpha-helical content of the melittins. It was found that selective replacement of the C-terminal basic amino acids by glutamine has different effects on self-association, alpha-helix formation and lipid binding of melittin.

The role of amphipathicity in the folding, self-association and biological activity of multiple subunit small proteins

The effect that altering amphipathicity has on the folding process and self association of melittin, a small model protein, has been investigated using single amino acid substitutions of lysine 7, a residue distant from the contact residues involved in the hydrophobic core of tetrameric melittin. While substitutions of such a residue were not expected to interfere with the packing process, the largest alterations in the potential overall amphipathicity of melittin were found to prevent the folding into an alpha-helical conformation to occur and, in turn, to prevent the self association. Amphipathic alpha-helices were found to be a key determining feature in the early folding process of the self association of peptides and protein segments. Those substitutions, which prevented the inducible amphipathic folding ability, were also found to result in a loss in hemolytic and antimicrobial activity. These results, combined with studies of the binding to artificial liposomes and to polysialic acids, indicate that the losses in activity were due to an initial inability to be induced into an amphipathic alpha-helix and to self associate. Ultimately, melittin's self association is proposed to be required to penetrate the carbohydrate barrier present in biological membranes.

Modulation of melittin-induced lysis by surface charge density of membranes

Phosphorus NMR spectroscopy was used to characterize the importance of electrostatic interactions in the lytic activity of melittin, a cationic peptide. The micellization induced by melittin has been characterized for several lipid mixtures composed of saturated phosphatidylcholine (PC) and a limited amount of charged lipid. For these systems, the thermal polymorphism is similar to the one observed for pure PC: small comicelles are stable in the gel phase and extended bilayers are formed in the liquid crystalline phase. Vesicle surface charge density influences strongly the micellization. Our results show that the presence of negatively charged lipids (phospholipid or unprotonated fatty acid) reduces the proportion of lysed vesicles. Conversely, the presence of positively charged lipids leads to a promotion of the lytic activity of the peptide. The modulation of the lytic effect is proposed to originate from the electrostatic interactions between the peptide and the bilayer surface. Attractive interactions anchor the peptide at the surface and, as a consequence, inhibit its lytic activity. Conversely, repulsive interactions favor the redistribution of melittin into the bilayer, causing enhanced lysis. A quantitative analysis of the interaction between melittin and negatively charged bilayers suggests that electroneutrality is reached at the surface, before micellization. The surface charge density of the lipid layer appears to be a determining factor for the lipid/peptide stoichiometry of the comicelles; a decrease in the lipid/peptide stoichiometry in the presence of negatively charged lipids appears to be a general consequence of the higher affinity of melittin for these membranes.

Ultrasonic study of melittin effects on phospholipid model membranes

Low dose effects of melittin on dilute suspensions of dipalmitoylphosphatidylcholine multilamellar vesicles are investigated by studying the acoustic properties of the system. The temperature dependencies of sound velocity and absorption have been measured at 7.2 MHz in the temperature range of 20-55 degrees C, for different peptide/lipid molar ratios, R. The most pronounced effects were observed at R = 5 x 10(-3), in the vicinity of the pretransition, with a simultaneous increase in sound absorption and velocity. This indicates that melittin affects the polar head group region of the bilayer resulting in a decrease in mobility of the polar head groups. A nonmonotonic dependence of the main transition temperature, with an initial decrease followed by an increase as melittin is added, is interpreted as a consequence of a destabilizing action of the interfaces between mellitin-affected clusters and the unaffected phase.

Defensins promote fusion and lysis of negatively charged membranes

Defensins, a family of cationic peptides isolated from mammalian granulocytes and believed to permeabilize membranes, were tested for their ability to cause fusion and lysis of liposomes. Unlike alpha-helical peptides whose lytic effects have been extensively studied, the defensins consist primarily of beta-sheet. Defensins fuse and lyse negatively charged liposomes but display reduced activity with neutral liposomes. These and other experiments suggest that fusion and lysis is mediated primarily by electrostatic forces and to a lesser extent, by hydrophobic interactions. Circular dichroism and fluorescence spectroscopy of native defensins indicate that the amphiphilic beta-sheet structure is maintained throughout the fusion process. Taken together, these results support the idea that protein-mediated membrane fusion depends not only on hydrophobic and electrostatic forces but also on the spatial arrangement of the amino acid residues to form a three-dimensional amphiphilic structure, which promotes the efficient mixing of the lipids between membranes. A molecular model for membrane fusion by defensins is presented, which takes into account the contributions of electrostatic forces, hydrophobic interactions, and structural amphiphilicity.

A novel property of a mitochondrial presequence. Its ability to induce cardiolipin-specific interbilayer contacts which are dissociated by a transmembrane potential

A new property of the presequence of the mitochondrial precursor protein cytochrome oxidase subunit IV is presented. This mitochondrial presequence induces interbilayer contacts between large unilamellar vesicles consisting of phosphatidylcholine and cardiolipin. The presequence-vesicle aggregates can be dissociated by applying a membrane potential across the bilayers (negative inside). These effects require the presence of cardiolipin and are not observed for other negatively charged phospholipids. We propose a role for the presequence in the formation and dissociation of mitochondrial contact sites.

How does a virus bud?

How does a virus bud from the plasma membrane of its host? Here we investigate several possible rate-limiting processes, including thermal fluctuations of the plasma membrane, hydrodynamic interactions, and diffusion of the glycoprotein spikes. We find that for bending moduli greater than 3 x 10(-13) ergs, membrane thermal fluctuations are insufficient to wrap the viral capsid, and the mechanical force driving the budding process must arise from some other process. If budding is limited by the rate at which glycoprotein spikes can diffuse to the budding site, we compute that the budding time is 10-20 min, in accord with the experimentally determined upper limit of 20 min. In light of this, we suggest some alternative mechanisms for budding and provide a rationale for the observation that budding frequently occurs in regions of high membrane curvature.

Insulin-induced enhancement of cell morphological dynamics: non-specific biophysical mechanisms for the generalized stimulation of metabolism?

Time series analysis of fluctuations in the intensity of light scattered by cells indicates the existence of a range of oscillations in cell morphology that usually occur in (pseudo) periodic bursts. Insulin has a frequency-dependent effect on the rhythms, predominantly that of stimulating the short period components believed to reflect surface movements. It is suggested that the non-specific action of the hormone on transport is due to an effective decrease in the net thickness of the surrounding diffusion layer (resulting from increased stirring of the micro-environment) and to accompanying membrane and cytoplasmic vibrations. From published data it seems likely that other mitogens and chemotactic agents act in a similar manner.

A molecular model for membrane fusion based on solution studies of an amphiphilic peptide from HIV gp41

The mechanism of protein-mediated membrane fusion and lysis has been investigated by solution-state studies of the effects of peptides on liposomes. A peptide (SI) corresponding to a highly amphiphilic C-terminal segment from the envelope protein (gp41) of the human immunodeficiency virus (HIV) was synthesized and tested for its ability to cause lipid membranes to fuse together (fusion) or to break open (lysis). These effects were compared to those produced by the lytic and fusogenic peptide from bee venom, melittin. Other properties studied included the changes in visible absorbance and mean particle size, and the secondary structure of peptides as judged by CD spectroscopy. Taken together, the observations suggest that protein-mediated membrane fusion is dependent not only on hydrophobic and electrostatic forces but also on the spatial arrangement of the amino acid residues to form an amphiphilic structure that promotes the mixing of the lipids between membranes. A speculative molecular model is proposed for membrane fusion by alpha-helical peptides, and its relationship to the forces involved in protein-membrane interactions is discussed.

The secondary structure of influenza A M2 transmembrane domain. A circular dichroism study

Using circular dichroism, this study investigated the secondary structure of the influenza A M2 transmembrane domain. When reconstituted into 1,2-dioleoyl-sn-glycero-3-phosphocholine liposomes, the M2 transmembrane domain was found to adopt a predominantly alpha-helical secondary structure which was unaffected by both temperature and the addition of 1-aminoadamantane hydrochloride. Reconstitution into 1,2-dioleoyl-sn-glycero-3-phosphoglycerol liposomes resulted in a marked decrease in helical content.

Melittin-induced alterations in dynamic properties of human red blood cell membranes

The interaction of bee venom melittin with erythrocyte membrane ghosts has been investigated by means of fluorescence quenching of membrane tryptophan residues, fluorescence polarization and ESR spectroscopy. It has been revealed that melittin induces the disorders in lipid-protein matrix both in the hydrophobic core of bilayer and at the polar/non-polar interface of melittin complexed with erythrocyte membranes. The peptide has been found to act most efficiently at the concentration of the order of 10(-10) mol/mg membrane protein. The apparent distance separating the membrane tryptophan and bound 1-anilino-8-naphthalenesulphonate (ANS) molecules is decreased upon melittin binding, which results in a significant increase of the maximum energy transfer efficiency. Significant changes in the fluorescence anisotropy of both 1,6-diphenyl-1,3,5-hexatriene and 1-anilino-8-naphthalenesulphonate bound to erythrocyte ghosts, which have been observed in the presence of melittin and crude venom, indicate membrane lipid bilayer rigidization. The effect of crude honey bee venom has been found to be of similar magnitude as the effect of pure melittin at the concentration of 10(-10) mol/mg membrane protein. Using two lipophilic spin labels, methyl 5-doxylpalmitate and 16-doxylstearic acid, we found that melittin at its increasing concentrations induces a well marked rigidization in the deeper regions of lipid bilayer, whereas the effect of rigidization near the membrane surface maximizes at the melittin concentration of 10(-10) mol/mg (10(-4) mol melittin per mole of membrane phospholipid). The decrease in the ratio hw/hs of maleimide and the rise in relative rotational correlation time (tau c) of iodacetamid spin label, indicate that melittin effectively immobilizes membrane proteins in the plane of the lipid bilayer. We conclude that melittin-induced rigidization of the lipid bilayer may induce a reorganization of lipid assemblies as well as the rearrangements in membrane protein pattern and consequently the alterations in lipid-protein interactions. Thus, the interaction of melittin with erythrocyte membranes is supposed to produce local conformational changes in membranes, which are discussed in the connection with their significance during the synergistic action of melittin and phospholipase of bee venom on red blood cells.

Activation of reconstituted Escherichia coli outer-membrane phospholipase A by membrane-perturbing peptides results in an increased reactivity towards the affinity label hexadecanesulfonyl fluoride

The activity of the Escherichia coli outer-membrane phospholipase (OM PLA) is strictly regulated in its natural habitat, the E. coli outer membrane. OM PLA can be reconstituted in phospholipid bilayers, resulting in low specific activity of the enzyme compared to its activity on mixed lipid/detergent micelles. The enzyme can be activated by the addition to these vesicles of the membrane-perturbing peptides polymyxin B, melittin or cardiotoxin resulting in hydrolysis of mainly the sn-1 ester bond of the phospholipids as is also observed in vivo. We used the affinity label hexadecanesulfonyl fluoride to probe the influence of lipid environment on the activity of OM PLA. In detergent and substrate micelles, the rate constant for the sulfonylation of the active-center serine of the purified OM PLA by the affinity label hexadecanesulfonyl fluoride depends on amphiphile concentration. We have reported a similar influence of amphiphile concentration on the activity of the enzyme [Horrevoets, A. J. G. et al. (1989) Biochemistry 28, 1139-1147]. Analysis of the rates of inactivation of OM PLA by hexadecanesulfonyl fluoride in vesicles composed of various phospholipids indicated that activation of the enzyme by membrane-perturbing peptides can be accurately quantified with this affinity label. Our results show that the affinity label hexadecanesulfonyl fluoride can be used to monitor the state of activation of OM PLA in different lipid environments, including non-hydrolyzable substrate analogues. Implications for the in vivo situation are discussed.

Polymorphic phospholipid phase transitions as tools to understand peptide-lipid interactions

The effect of peptides on bilayer----non-bilayer phase transitions can be used as a tool to investigate the molecular aspects of peptide-lipid interactions. In this contribution the action on membranes of the peptide antibiotic gramicidin A and the bee venom component melittin are compared. Although the known structures and locations of these peptides upon membrane binding are very different, their actions on membranes show striking parallels. A general model is proposed that explains the seemingly complex peptide-lipid interactions by making use of simple concepts.

Fluorescence-quenching-resolved spectra of melittin in lipid bilayers

The interaction of bee venom melittin with dimyristoylphosphatidylcholine (DMPC) unilamellar vesicles has been studied by means of fluorescence quenching of the single tryptophan residue of the protein, at lipid-to-peptide ratio, Ri = 50 and at high ionic strength (2 M NaCl). The method of fluorescence-quenching-resolved spectra (FQRS), applied in this study with potassium iodide as a quencher, enabled us to decompose the tryptophan emission spectrum of liposome-bound melittin into components, at temperatures above as well as below the main phase transition temperature (Tt) of DMPC. One of the two resolved spectra exhibits maximum at 342 and 338 nm for experiments above and below Tt, respectively, and is similar to the maximum of tryptophan emission found for tetrameric melittin in solution (340 nm). This spectrum is characterized by the Stern-Volmer quenching constant, Ksv, of about 4 M-1 and it represents the fraction of melittin molecules whose tryptophan residues are exposed to the solvent to a degree comparable with tetrameric species in solution. The other spectrum component, corresponding to the quencher-inaccessible fraction of tryptophan molecules (Ksv = 0 M-1) has its maximum blue-shifted up to 15 nm, indicating a decrease in polarity of the environment. For experiments above Tt, the blue spectrum component revealed the excitation-wavelength dependence, originating probably from the relaxation processes between the excited tryptophan molecules and lipid polar head groups. We conclude that melittin bound to DMPC liposomes exists in two lipid-associated forms; one, with tryptophan residues exposed to the solvent and the other, penetrating the membrane interior, with tryptophan residues located in close proximity to the phospholipid polar head groups of the outer vesicle lipid layer. We also discuss our data with current models of melittin-bilayer interactions.

Periodically curved bilayer structures observed in hyphal cells or stable L-form cells of a Streptomyces strain, and in liposomes formed by the extracted lipids

Periodically curved bilayer structures showing a tetragonal pattern were revealed by freeze-fracture electron microscopy in hyphal cells, stable L-form cells, and liposomes prepared from extracted lipids of Streptomyces hygroscopicus NG 33-354. The pattern is formed by alternating convex and concave curvatures of the bilayer. It has been found with different repeat distances (multiples of about 15 nm) and with a different degree of expression (from just visible to very pronounced). An interpretation as infinite periodic minimal surface (IPMS) structures is more probable than an inducement of the pattern by underlying small vesicles. The occurrence of nonbilayer textures and the similarity of the tetragonal pattern with a 'bilayer sector' from a cubic phase structure (Anderson, S. et al. (1988) Chem. Rev. 88, 221-242) support such an interpretation.

The actions of melittin on membranes

The molecular mechanisms underlying the various effects of melittin on membranes have not been completely defined and much of the evidence described indicates that different molecular mechanisms may underlie different actions of the peptide. Ideas about the formation of transbilayer aggregates of melittin under the influence of a transbilayer potential, and for bilayer structural perturbation arising from the location of the peptide helix within the head group region of the membrane have been made based on the crystal structure of the peptide, the kinetics and concentration dependence of melittins membrane actions, together with simple ideas about the conformational properties of amphipathic helical peptides and their interactions with membranes. Physical studies of the interaction of melittin with model membranes have been useful in determining the potential of the peptide to adopt different locations, orientations and association states within membranes under different conditions, but the relationship of the results obtained to the actions of melittin in cell membranes or under the influence of a membrane potential are unclear. Experimental definition of the interaction of melittin with more complex membranes, including the erythrocyte membrane or in bilayers under the influence of a transmembrane potential, will require direct study in these membranes. Experiments employing labeled melittins for ESR, NMR or fluorescence experiments are promising both for their sensitivity (ESR and fluorescence) and the ability to focus on the peptide within the background of endogenous proteins within cell membranes. The study of melittin in model membranes has been useful for the development of methodology for determination of membrane protein structures. Despite the structural complexity of integral membrane proteins, it is interesting that in some respects their study be more straightforward, lacking as they do the elusive properties of melittin (and other structurally labile membrane peptides) which limit the possibility of defining their interaction with membranes in terms of a single conformation, location, orientation and association state within the membrane.

Membrane biogenesis in Escherichia coli: effects of a secA mutation

In Escherichia coli K-12, temperature-sensitive mutations in the secA gene have been shown to interfere with protein export. Here we show that the effect of a secA mutation is strongly pleiotropic on membrane biogenesis. Freeze-fracture experiments as well as cryosections of the cells revealed the appearance of intracytoplasmic membranes upon induction of the SecA phenotype. The permeability barrier of the outer membrane to detergents was lost. Two alterations in the outer membrane may be responsible for this effect, namely the reduced amounts of outer membrane proteins, or the reduction of the length of the core oligosaccharide of the lipopolysaccharide, which was observed in phage-sensitivity experiments and by SDS-polyacrylamide gel electrophoresis. Phospholipid analysis of the secA mutant, grown under restrictive conditions, revealed a lower content of the negatively charged phospholipid cardiolipin and of 18:1 fatty acid compared to those of the parental strain grown under identical conditions. These results are in line with the hypothesis that protein export and lipid metabolism are coupled.