Optimization of the synthesis of peptide combinatorial libraries using a one-pot method

Enzymatic Peptide and Protein Bromination: The BromoTrp Tag

Bio-orthogonal reactions for modification of proteins and unprotected peptides are of high value in chemical biology. The combination of enzymatic halogenation with transition metal-catalyzed cross-coupling provides a feasible approach for the modification of proteins and unprotected peptides. By a semirational protein engineering approach, variants of the tryptophan 6-halogenase Thal were identified that enable efficient bromination of peptides with a C-terminal tryptophan residue. The substrate scope was explored using di-, tri-, and tetrapeptide arrays, leading to the identification of an optimized peptide tag we named BromoTrp tag. This tag was introduced into three model proteins. Preparative scale post-translational bromination was possible with only a single cultivation and purification step using the brominating E. coli coexpression system Brocoli. Palladium-catalyzed Suzuki-Miyaura cross-coupling of the bromoarene was achieved with Pd nanoparticle catalysts at 37 °C, highlighting the rich potential of this strategy for bio-orthogonal functionalization and conjugation.

MALDI-MS Analysis of Peptide Libraries Expands the Scope of Substrates for Farnesyltransferase

Protein farnesylation is a post-translational modification where a 15-carbon farnesyl isoprenoid is appended to the C-terminal end of a protein by farnesyltransferase (FTase). This modification typically causes proteins to associate with the membrane and allows them to participate in signaling pathways. In the canonical understanding of FTase, the isoprenoids are attached to the cysteine residue of a four-amino-acid CaaX box sequence. However, recent work has shown that five-amino-acid sequences can be recognized, including the pentapeptide CMIIM. This paper describes a new systematic approach to discover novel peptide substrates for FTase by combining the combinatorial power of solid-phase peptide synthesis (SPPS) with the ease of matrix-assisted laser desorption ionization-mass spectrometry (MALDI-MS). The workflow consists of synthesizing focused libraries containing 10-20 sequences obtained by randomizing a synthetic peptide at a single position. Incubation of the library with FTase and farnesyl pyrophosphate (FPP) followed by mass spectrometric analysis allows the enzymatic products to be clearly resolved from starting peptides due to the increase in mass that occurs upon farnesylation. Using this method, 30 hits were obtained from a series of libraries containing a total of 80 members. Eight of the above peptides were selected for further evaluation, reflecting a mixture that represented a sampling of diverse substrate space. Six of these sequences were found to be bona fide substrates for FTase, with several meeting or surpassing the in vitro efficiency of the benchmark sequence CMIIM. Experiments in yeast demonstrated that proteins bearing these sequences can be efficiently farnesylated within live cells. Additionally, a bioinformatics search showed that a variety of pentapeptide CaaaX sequences can be found in the mammalian genome, and several of these sequences display excellent farnesylation in vitro and in yeast cells, suggesting that the number of farnesylated proteins within mammalian cells may be larger than previously thought.

Identification of Peptide Ligands Specific for the Sugar-Binding Site of Concanavalin A by Screening a Synthetic Peptide Combinatorial Library

We describe a method, using an automated multiple-column chromatographic approach, for identifying a ligand from a peptide library (containing greater than 2.48 x 106 unique peptides) with specificity for the sugar-binding site of the lectin Concanavalin A. The method used an immobilized target to capture moieties from the library as the latter flowed through a chromatographic column. Due to the complexity of the initial library, it was not possible to select for individual peptide sequences with high affinity and specificity for the sugar binding site. However, identification of peptides which specifically bound to the target at this site was possible using subtractive pool sequencing of affinity captured material. The latter technique involved sequencing the peptides retained (after washing the column for a fixed time) in the presence and absence of an excess of the known ligand for the target, methyl a-D-mannopyranoside. Comparisons between the proportion of each amino acid at each sequencing cycle in the absence or presence of an excess of sugar resulted in a peptide sequence of enriched amino acids of the formula HxxSx (where x represents any one of the natural amino acids except cysteine). This sublibrary (containing-6859 individual peptides) was synthesized and rescreened. Two peptide sequences (HHRSY and HVVSV) were identified with relatively high affinity for the sugar-binding site of Concanavalin A. The described technique of solution-phase subtractive pool sequencing (Patent pending) can be employed for rapidly screening highly complex mixtures of peptides and obtaining information about the amino acids within the sequences that are essential for binding to a particular site on the target. This technique could also be applied to other combinatorial mixtures (e.g., PNAs, nucleic acids, or libraries composed of either non-natural or D-amino acids) where a defined number of discrete components are synthesized in a variety of permutations.

Chemical models of peptide formation in translation

Ribosomal incorporations of N-alkyl amino acids including proline are slower than incorporations of non-N-alkyl l-amino acids. The chemical reactivity hypothesis proposes that these results and the exclusion of nonproline N-alkyl amino acids from the genetic code are explained by intrinsic chemical reactivities of the amino acid nucleophiles. However, there is little data on the reactivities relevant to physiological conditions. Here, we use nonenzymatic, aqueous-based, buffered reactions with formylmethionine-N-hydroxysuccinimide ester to model 11 amino acid nucleophiles in dipeptide formation. The relative rates in the nonenzymatic and translation systems correlate well, supporting the chemical reactivity hypothesis and arguing that peptide bond formation, not accommodation, is rate limiting for natural Pro-tRNA(Pro) isoacceptors. The effects of N-substitution sterics, side chain sterics, induction, and pK(a) were evaluated in the chemical model. The dominant factor affecting relative rates was found to be N-substitution sterics.

Catalytic properties of recombinant dipeptidyl carboxypeptidase from Escherichia coli: a comparative study with angiotensin I-converting enzyme

Dipeptidyl carboxypeptidase from Escherichia coli (EcDcp) is a zinc metallopeptidase with catalytic properties closely resembling those of angiotensin I-converting enzyme (ACE). However, EcDcp and ACE are classified in different enzyme families (M3 and M2, respectively) due to differences in their primary sequences. We cloned and expressed EcDcp and studied in detail the enzyme's S(3) to S(1)' substrate specificity using positional-scanning synthetic combinatorial (PS-SC) libraries of fluorescence resonance energy transfer (FRET) peptides. These peptides contain ortho-aminobenzoic acid (Abz) and 2,4-dinitrophenyl (Dnp) as donor/acceptor pair. In addition, using FRET substrates developed for ACE [Abz-FRK(Dnp)P-OH, Abz-SDK(Dnp)P-OH and Abz-LFK(Dnp)-OH] as well as natural ACE substrates (angiotensin I, bradykinin, and Ac-SDKP-OH), we show that EcDcp has catalytic properties very similar to human testis ACE. EcDcp inhibition studies were performed with the ACE inhibitors captopril (K(i)=3 nM) and lisinopril (K(i)=4.4 microM) and with two C-domain-selective ACE inhibitors, 5-S-5-benzamido-4-oxo-6-phenylhexanoyl-L-tryptophan (kAW; K(i)=22.0 microM) and lisinopril-Trp (K(i)=0.8 nM). Molecular modeling was used to provide the basis for the differences found in the inhibitors potency. The phylogenetic relationship of EcDcp and related enzymes belonging to the M3 and M2 families was also investigated and the results corroborate the distinct origins of EcDcp and ACE.

Positional-scanning combinatorial libraries of fluorescence resonance energy transfer peptides to define substrate specificity of carboxydipeptidases: assays with human cathepsin B

We have developed positional scanning synthetic combinatorial libraries to define the substrate specificity of carboxydipeptidases. The library Abz-GXXZXK(Dnp)-OH, where Abz is ortho-aminobenzoic acid, K(Dnp) is N(epsilon)-2,4-dinitrophenyl-lysine with free carboxyl group, the Z position was successively occupied with 1 of 19 amino acids (cysteine was omitted), and X represents randomly incorporated residues, was assayed initially with human cathepsin B, and arginine was defined as one of the best residues at the P(1) position. To examine the selectivity of S(1)('), S(2), and S(3) subsites, the sublibraries Abz-GXXRZK(Dnp)-OH, Abz-GXZRXK(Dnp)-OH, and Abz-GZXRXK(Dnp)-OH were then synthesized. The peptide Abz-GIVRAK(Dnp)-OH, which contains the most favorable residues in the P(3)-P(1)(') positions identified by screening of the libraries with cathepsin B, was hydrolyzed by this enzyme with k(cat)/K(m)=7288 mM(-1)s(-1). This peptide is the most efficient substrate described for cathepsin B to this point, and it is highly selective for the enzyme among the lysosomal cysteine proteases.

Human recombinant endopeptidase PHEX has a strict S1' specificity for acidic residues and cleaves peptides derived from fibroblast growth factor-23 and matrix extracellular phosphoglycoprotein

The PHEX gene (phosphate-regulating gene with homologies to endopeptidases on the X chromosome) encodes a protein (PHEX) with structural homologies to members of the M13 family of zinc metallo-endopeptidases. Mutations in the PHEX gene are responsible for X-linked hypophosphataemia in humans. However, the mechanism by which loss of PHEX function results in the disease phenotype, and the endogenous PHEX substrate(s) remain unknown. In order to study PHEX substrate specificity, combinatorial fluorescent-quenched peptide libraries containing o -aminobenzoic acid (Abz) and 2,4-dinitrophenyl (Dnp) as the donor-acceptor pair were synthesized and tested as PHEX substrates. PHEX showed a strict requirement for acidic amino acid residues (aspartate or glutamate) in S(1)' subsite, with a strong preference for aspartate. Subsites S(2)', S(1) and S(2) exhibited less defined specificity requirements, but the presence of leucine, proline or glycine in P(2)', or valine, isoleucine or histidine in P(1) precluded hydrolysis of the substrate by the enzyme. The peptide Abz-GFSDYK(Dnp)-OH, which contains the most favourable residues in the P(2) to P(2)' positions, was hydrolysed by PHEX at the N-terminus of aspartate with a k(cat)/ K(m) of 167 mM(-1) x s(-1). In addition, using quenched fluorescence peptides derived from fibroblast growth factor-23 and matrix extracellular phosphoglycoprotein sequences flanked by Abz and N -(2,4-dinitrophenyl)ethylenediamine, we showed that these physiologically relevant proteins are potential PHEX substrates. Finally, our results clearly indicate that PHEX does not have neprilysin-like substrate specificity.

Synthesis and physical characterization of a P1 arginine combinatorial library, and its application to the determination of the substrate specificity of serine peptidases

Serine peptidases are a large, well-studied, and medically important class of peptidases. Despite the attention these enzymes have received, details concerning the substrate specificity of even some of the best known enzymes in this class are lacking. One approach to rapidly characterizing substrate specificity for peptidases is the use of positional scanning combinatorial substrate libraries. We recently synthesized such a library for enzymes with a preference for arginine at P1 and demonstrated the use of this library with thrombin (Edwards et al. Bioorg. Med. Chem. Lett. 2000, 10, 2291). In the present work, we extend these studies by demonstrating good agreement between the theroretical and measured content of portions of this library and by showing that the library permits rapid characterization of the substrate specificity of additional SA clan serine peptidases including factor Xa, tryptase, and trypsin. These results were consistent both with cleavage sites in natural substrates and cleavage of commercially available synthetic substrates. We also demonstrate that pH or salt concentration have a quantitative effect on the rate of cleavage of the pooled library substrates but that correct prediction of optimal substrates for the enzymes studied appeared to be independent of these parameters. These studies provide new substrate specificity data on an important class of peptidases and are the first to provide physical characterization of a peptidase substrate library.

Synthesis and enzymatic evaluation of a P1 arginine aminocoumarin substrate library for trypsin-like serine proteases

A method for the solid-phase synthesis of P1 arginine containing peptides via attachment of the arginine side-chain guanidine group is described. This procedure is applied to the preparation of a tetrapeptide, P1 arginine aminocoumarin PS-SCL. This library was validated by using it to determine the P4-P2 specificity for thrombin and comparing the results to the known thrombin subsite specificity. This is the first reported example of a PS-SCL library containing a P1 arginine.

"High-load" polyethylene glycol-polystyrene (PEG-PS) graft supports for solid-phase synthesis

The choice of a polymeric support is a key factor for the success of solid-phase methods for syntheses of organic compounds and biomolecules such as peptides and oligonucleotides. Classical Merrifield solid-phase peptide synthesis (SPPS), performed on low cross-linked hydrophobic polystyrene (PS) beads, sometimes suffers from sequence-dependent coupling difficulties. The concept of incorporating polyethylene glycol (PEG) into supports for solid-phase synthesis represents a successful approach to alleviating such problems. Previous reports from our laboratories have shown the advantages of "low-load" PEG-PS (0.15-0.25 mmol/g) for SPPS. Herein, we demonstrate that the beneficial aspects of the PEG-PS concept can be extended with resins that have higher loadings (0.3-0.5 mmol/g).

The search for orally active medications through combinatorial chemistry

The literature of combinatorial chemistry is reviewed with particular attention paid to considerations of absorption, distribution, metabolism and excretion in the design and evaluation of libraries containing drug-like molecules. Published libraries are evaluated in particular for the likelihood that the products would possess oral bioavailability.