An evaluation of unbonded silica stationary phases for the separation of basic analytes using capillary electrochromatography

Preparation and characterisation of dual-layer latex-coated columns for open-tubular capillary electrochromatographic preconcentration of cations combined in-line with their separation by capillary electrophoresis

A dual-layer ion-exchange latex-coated column was prepared and characterised for on-capillary preconcentration of cations using an open-tubular ion-exchange CEC format. After preconcentration, the analyte cations were eluted with a transient isotachophoretic gradient and separated by CE. The latex double layer was established by first coating the negatively charged wall of the capillary with a layer of cationic quaternary ammonium anion-exchange Dionex AS5A latex particles (60 nm diameter), and then coating a layer of anionic sulphonated cation-exchange Dionex CS3 latex particles (300 nm diameter) onto the underlying AS5A layer. The adhesion of layers is based on electrostatic attractions. Several dual-layer capillaries were characterised for their EOF and ion-exchange capacity and this showed that coatings could be prepared reproducibly by a simple flushing procedure. The dual-layer columns exhibited a moderate, pH-independent EOF (ca. 26 x 10(-9 )m2V(-1)s(-1)) and an ion-exchange capacity of 57 microequiv./g (or 2.69 nequiv./column). Using an 8 cm length of coated capillary combined with a 72 cm length of untreated capillary, a method for on-line preconcentration and separation of monovalent organic bases, alkali metal ions and alkaline earth metal ions by CE was developed. Recoveries for the preconcentration step were 48% for 4-methylbenzylammonium, 43% for benzylammonium, 30-32% for alkali metal ions and 71-75% for alkaline earth cations. In all cases, recoveries were reproducible with RSDs being less than 6.2%. The influences of the ion-exchange selectivity coefficient of the analyte and the sample-loading rate on analyte recovery were also examined. The proposed method was utilised for the determination of alkaline earth cations and low microM detection limits were obtained.

An evaluation of the robustness of the Tanaka characterization protocol for reversed-phase liquid chromatography columns

The robustness of the popular 'Tanaka' LC column characterization protocol has been evaluated by the statistical tools of reduced factorial design, multiple linear regression and principal component analysis. These have shown that in order to obtain reliable and reproducible results, it is especially important to control the methanol content, the temperature and, in the case of the total ion-exchange capacity test (alphaB/P pH 7.6), the pH of the mobile phase. In particular, the hydrophobicity tests (kPB and alphaCH2) are sensitive to small changes in methanol content. Provided that the operating parameters for the Tanaka column characterization protocol are controlled within the following experimental limits, i.e. methanol content +/-0.5% v/v, temperature +/-3degreesC, pH +/-0.10 and buffer concentration +/-2.0 mM, it is feasible to distinguish between RP materials that possess selectivity differences larger than their batch-to-batch reproducibility. These experimental requirements can be easily met by current LC instrumentation. Hence, the validity of the Tanaka testing protocol for characterizing columns has been verified.

Polar stationary phases for capillary electrochromatography

This review article summarizes the variety of polar stationary phases that have been employed for capillary electrochromatographic separations. Compared with reversed-phase stationary phases, the polar alternatives provide a completely different retention selectivity towards polar and charged analytes. Different types of polar stationary phases are reviewed, including the possible retention mechanisms. Electrochromatographic separations of polar solutes, peptides, and basic pharmaceuticals on polar stationary phases are presented.

Electrochromatographic evaluation of a silica monolith capillary column for separation of basic pharmaceuticals

A silica-based monolithic capillary column was prepared via a sol-gel process. The continuous skeleton and large through-pore structure were characterized by scanning electron microscopy (SEM). The native silica monolith has been successfully employed in the electrochromatographic separation of beta-blockers and alkaloids extracted from traditional Chinese medicines (TCMs). Column efficiencies greater than 250 000 plates/m for capillary electrochromatography (CEC) separation of basic compounds were obtained. It was observed that retention of basic pharmaceuticals on the silica monolith was mainly contributed by a cation-exchange mechanism. Other retention mechanisms including reversed-phase and normal-phase mechanisms and electrophoresis of basic compounds also played a role in separation. A comparison of the differences between CEC and capillary zone electrophoresis (CZE) separation was also discussed.

Chromatographic classification and comparison of commercially available reversed-phase liquid chromatographic columns using principal component analysis

A total of 135 commercially available alkyl, cyano, phenyl, perfluorinated, polar embedded, enhanced polar selectivity (i.e., polar/hydrophilic endcapped), "Aqua type" and a variety of novel phases including some non-silica based stationary phases have been characterised in terms of their surface coverage, hydrophobic selectivity, shape selectivity, hydrogen bonding capacity and ion-exchange capacity at pH 2.7 and 7.6. Principal component analysis has been used to provide a simple graphical comparison of the differences/similarities between columns in the entire database and differing subsets such as "Aqua type"/enhanced polar selectivity phases. The PCA has been correlated to the phase's ability to analyse a range of hydrophilic bases.

Separation of negatively charged nonsteroidal anti-inflammatory drugs by reversed-phase capillary electrochromatography

Reversed-phase capillary electrochromatography in a 5-microm C18 fully packed capillary was employed to optimize the separation of negatively charged nonsteroidal anti-inflammatory drugs. The effect of the physico-chemical parameters and different analysis modes on the separation of 2-arylpropionic acids was studied and evaluated. The mobile phase composition, buffer type, concentration and pH differently influenced the peak efficiency and resolution, selectively modulating the analytes interaction with the stationary phase. The use of zwitterionic MES or acetate mobile phases strongly modulated the analytes migration order and peak efficiency. The optimum experimental conditions were found in MES buffer, pH 5.0, containing the 75% acetonitrile-methanol (1:1). All the analytes were baseline separated in a mixture in less than 13 min with peak efficiencies in the range of 78,500-84,200 N/m. Under these conditions the analytes were negatively charged and their effective electrophoretic mobilities played a role in the separation. The analysis of different pharmaceutical preparations containing anti-inflammatory drugs, e.g. drops and tablets, is also presented after a very simple sample pretreatment.

Recent applications of capillary electrochromatography

A review is presented of the most important recent applications of capillary electrochromatography (CEC) for the analysis of acidic, basic, and neutral compounds, of biomolecules, environmental substances, natural products, pharmaceuticals, and chiral compounds. Packed-column CEC (packed-CEC), open-tubular (OT-CEC), as well as pressure-assisted CEC (pseudo-CEC) are hereby considered. Papers published between July 1999 and April 2001 were taken into account. Applications before July 1999 have been reviewed in Electrophoresis 1999, 20, 3027-3065.