Solid-phase microextraction coupled with microcolumn liquid chromatography for the analysis of amitriptyline in human urine

New-generation bar adsorptive microextraction (BAμE) devices for a better eco-user-friendly analytical approach-Application for the determination of antidepressant pharmaceuticals in biological fluids

The present contribution aims to design new-generation bar adsorptive microextraction (BAμE) devices that promote an innovative and much better user-friendly analytical approach. The novel BAμE devices were lab-made prepared having smaller dimensions by using flexible nylon-based supports (7.5 × 1.0 mm) coated with convenient sorbents (≈ 0.5 mg). This novel advance allows effective microextraction and back-extraction ('only single liquid desorption step') stages as well as interfacing enhancement with the instrumental systems dedicated for routine analysis. To evaluate the achievements of these improvements, four antidepressant agents (bupropion, citalopram, amitriptyline and trazodone) were used as model compounds in aqueous media combined with liquid chromatography (LC) systems. By using an N-vinylpyrrolidone based-polymer phase good selectivity and efficiency were obtained. Assays performed on 25 mL spiked aqueous samples, yielded average recoveries in between 67.8 ± 12.4% (bupropion) and 88.3 ± 12.1% (citalopram), under optimized experimental conditions. The analytical performance also showed convenient precision (RSD < 12%) and detection limits (50 ng L^-1), as well as linear dynamic ranges (160-2000 ng L^-1) with suitable determination coefficients (r² > 0.9820). The application of the proposed analytical approach on biological fluids showed negligible matrix effects by using the standard addition methodology. From the data obtained, the new-generation BAμE devices presented herein provide an innovative and robust analytical cycle, are simple to prepare, cost-effective, user-friendly and compatible with the current LC autosampler systems. Furthermore, the novel devices were designed to be disposable and used together with negligible amounts of organic solvents (100 μL) during back-extraction, in compliance with the green analytical chemistry principles. In short, the new-generation BAμE devices showed to be an eco-user-friendly approach for trace analysis of priority compounds in biological fluids and a versatile alternative over other well-stablished sorption-based microextraction techniques.

Improvement and validation the method using dispersive liquid-liquid microextraction with in situ derivatization followed by gas chromatography-mass spectrometry for determination of tricyclic antidepressants in human urine samples

A simple, rapid and sensitive method termed dispersive liquid-liquid microextraction (DLLME) combined with gas chromatography-mass spectrometry (GC/MS) was developed for the determination of tricyclic antidepressants (TCAs) in human urine sample. An appropriate mixture of methanol (disperser solvent), carbon tetrachloride (extraction solvent), and acetic anhydride (derivatization reagent) was injected rapidly into human urine sample. After extraction, the sedimented phase was analyzed by GC/MS. The calibration curves obtained with human urine were linear with a correlation coefficient of over 0.99 in the range of 2.0/5.0-100 ng mL(-1). Under the optimum conditions (carbon tetrachloride: 10 μL, methanol: 150 μL), the detection limits and the quantification limits of the tricyclic antidepressants were 0.5-2.0 ng mL(-1) and 2.0-5.0 ng mL(-1), respectively. The average recoveries of TCAs were 88.2-104.3%. Moreover, the inter- and intra-day precision and accuracy was acceptable at all concentrations. The results showed that DLLME is applicable to the determination of trace amounts of TCAs in human urine sample.

Bio-sample preparation and analytical methods for the determination of tricyclic antidepressants

An extended and comprehensive review is presented herein, focusing on sample preparation (pretreatment and extraction) and different analytical methods applied for the quantification of tricyclic antidepressants. These procedures are relevant tools in clinical and forensic toxicology. It is revealed that SPE, for sample preparation, and HPLC, using reversed-phase alkyl (C18) or cyanopropyl-bonded silica columns for the analytes separation, are effective and versatile methods for assay of tricyclic antidepressants. These methods enable achievable detection limits using UV/diode array detection, readily available in most laboratories, down to 1–8 ng ml-1, and using electron capture detection better than 1 ng ml-1, which is lower than that for nitrogen–phosphorus detector. MS interfaced with electrospray ionization offered similar sensitivity, whilst sonic spray ionization provided detection down to 0.03 ng ml-1. A brief discussion on chemical structures, metabolism and mechanism of action of this group of drugs is also presented.

Enantioselective analysis of mirtazapine, demethylmirtazapine and 8-hydroxy mirtazapine in human urine after solid-phase microextraction

A selective and reproducible off-line solid-phase microextraction procedure was developed for the simultaneous enantioselective determination of mirtazapine (MRT), demethylmirtazapine and 8-hydroxymirtazapine in human urine. CE was used for optimization of the extraction procedure whereas LC-MS was used for method validation and application. The influence of important factors in the solid-phase microextraction efficiency is discussed, such as the fiber coatings, extraction time, pH, ionic strength, temperature and desorption time. Before extraction, human urine samples were submitted to enzymatic hydrolysis at 37 degrees C for 16 h. Then, the enzyme was precipitated with trichloroacetic acid and the pH was adjusted to 8 with 1 mol/L pH 11 phosphate buffer solution. In the extraction, the analytes were transferred from the aqueous solution to the polydimethylsiloxane-divinylbenzene fiber coating and then desorbed in methanol. The mean recoveries were 5.4, 1.7 and 1.0% for MRT, demethylmirtazapine and 8-hydroxymirtazapine enantiomers, respectively. The method was linear over the concentration range of 62-1250 ng/mL. The within-day and between-day assay precision and accuracy were lower than 15%. The method was successfully employed in a preliminary cumulative urinary excretion study after administration of racemic MRT to a healthy volunteer.

Fast urinary screening for imipramine and desipramine using on-line solid-phase extraction and selective derivatization

A continuous-flow configuration based on sequential solid-phase extraction and derivatization is proposed for the screening of urine samples for imipramine and related metabolites. For the first time, a 50/50 (v/v) methanol/nitric acid mixture is used as both eluent and derivatizing reagent. Sample aliquots are injected into the flow manifold and driven by a water stream to an RP-C(18) column where the drugs are quantitatively retained. Following clean-up step with 40/60 (v/v) methanol/water, the eluent/derivatizing reagent is injected and passed through the sorbent column, eluted drugs reacting with nitric acid to form a blue dye that is monitored at 600 nm. The global signal thus obtained for the antidepressants can be used to estimate their total concentration in the samples without the need to individually quantify the analytes. This total index can be used for timely decision-making in case of overdosage. The proposed method is sensitive and selective; thus, typical interferents such as endogenous and diet compounds have no substantial effect on the analytical signal. This allows imipramine and its metabolites to be determined at therapeutic levels in urine samples.

Strategies for interfacing solid-phase microextraction with liquid chromatography

Solid-phase microextraction (SPME) techniques are equally applicable to both volatile and non-volatile analytes, but the progress in applications to gas-phase separations has outpaced that of liquid-phase separations. The interfacing of SPME to gas chromatographic equipment has been straight-forward, requiring little modification of existing equipment. The requirement of solvent desorption for non-volatile or thermally labile analytes has, however, proven challenging for interfacing SPME with liquid-phase separations. Numerous options to achieve this have been described in the literature over the past decade, with applications in several different areas of analysis. To date, no single strategy or interface device design has proven optimal. During method development analysts must select the most appropriate interfacing technique among the options available. Out of these options three general strategies have emerged: (1) use of a manual injection interface tee; (2) in-tube SPME; and (3) off-line desorption followed by conventional liquid injection. In addition, there has been interest in coupling SPME directly to electrospray ionisation and matrix-assisted laser desorption ionisation (MALDI) for mass spectrometry. Several examples of each of these strategies are reviewed here, and an overview of their use and application is presented.

Optimization of solid-phase microextraction procedures for the determination of tricyclic antidepressants and anticonvulsants in plasma samples by liquid chromatography

Simple, sensitive, and reproducible off-line solid-phase microextraction and liquid chromatography (SPME/LC) methods are described for the determination of seven anticonvulsants and tricyclic antidepressants in human plasma. Factorial design and simplex methodology were applied in the optimization of the SPME procedure for tricyclic antidepressants analyses. Important factors in the SPME efficiency are discussed, such as the fiber coatings (both lab-made and commercial), extraction time, pH, ionic strength, influence of plasma proteins, and desorption conditions. The development of the lab-made fiber coatings, namely, octadecylsilane, aminosilane, and polyurethane, are further described and applied to anticonvulsants analyses. The investigated plasmatic range for the evaluated anticonvulsants, using CW-TPR fiber, were the following: phenylethylmalonamide (3.00-40.0 microg mL(-1)), phenobarbital (5.00-40.0 microg mL(-1)), primidone (3.00-40.0 microg mL(-1)), carbamazepine and carbamazepine-epoxide (2.00-24.0 microg mL(-1)), phenytoin (2.00-40.0 microg mL(-1)), and lamotrigine (0.50-12.0 microg mL(-1)). The antidepressants' linear plasmatic concentration ranged from 75.0 to 500 ng mL(-1) for imipramine, amitriptyline, and desipramine, and from 50.0 to 500 ng mL(-1) for nortriptyline, being in all cases, the limit of quantification represented by the lowest value. The precision (interassays) for all investigated drugs in plasma sample spiked with different concentrations of each analyte and submitted to the described procedures were lower than 15%. The off-line SPME/LC methodologies developed allow anticonvulsants and antidepressants analyses from therapeutic to toxic levels for therapeutic drug monitoring.

Preparation of stir bars for sorptive extraction using sol–gel technology

A sol-gel coating method for the preparation of extractive phase on bars used in sorptive microextraction is described. The extraction phase of poly(dimethylsiloxane) is partially crosslinked with the sol-gel network, and the most part is physically incorporated in the network. Three aging steps at different temperatures are applied to complete the crosslinking process. Thirty-micrometer-thick coating layer is obtained by one coating process. The improved coating shows good thermal stability up to 300 degrees C. Spiked aqueous samples containing n-alkanes, polycyclic aromatic hydrocarbons and organophosphorus pesticides were analyzed by using the sorptive bars and GC. The results demonstrate that it is suitable for both aploar and polar analytes. The detection limit for chrysene is 7.44 ng/L, 0.74 ng/L for C19 and 0.9 ng/L for phorate. The extraction equilibration can be reached in less than 15 min by supersonic extraction with the bars of 30 microm coating layer.

Miniaturized sample preparation combined with liquid phase separations

Miniaturized sample preparation methods designed as the sample pretreatment for liquid phase separations, such as liquid chromatography, capillary electrophoresis and capillary electrochromatography, have been reviewed especially for the on-line coupling of the sample preparation process and the separation process. The development of the desorption interfaces for the effective combining of the sample preparation and subsequent liquid phase separations is briefly described along with the applications of the combined analytical systems to the analysis of complex sample mixtures such as biological and environmental matrices. Novel use of fine polymeric filaments as the extraction medium for microscale liquid phase separation methods are investigated and a comparison is made with other sample preparation techniques. Polymer coating onto the fibrous material is also introduced to further develop microscale sample preparation methods with improved extraction performance. Several other microscale sample preparation methods having a potential compatibility to the liquid phase separations are also described for future applications of these techniques.

Polymer-coated fibrous extraction medium for sample preparation coupled to microcolumn liquid-phase separations

Polymer-coated fibrous material has been introduced as the extraction medium for a miniaturized sample preparation method being coupled with microcolumn liquid chromatography. The preconcentration and the subsequent liquid chromatographic separation of tricyclic antidepressants (TCAs) drugs, amitriptyline, imipramine, nortriptyline and desipramine, was carried out with the hyphenated system. Several basic experimental parameters, such as extraction and separation conditions, were investigated along with the applicability of the method for the analysis of biological fluids. The results clearly showed that the on-line coupled system could be a powerful tool for the analysis of complex mixtures in biological matrix without a large solvent consumption and specially designed instruments. The lowest limit of quantification was quite acceptable for the analysis of TCAs in clinical and forensic situations.

Miniaturized sample preparation and separation methods for environmental and drug analyses

Miniaturized extraction and separation media have been successfully developed from precisely controlled technologies. In this article, recent developments in these high performance analytical methods, such as miniaturized sample preparation methods and the coupling of these techniques with microscale separation systems, have been reviewed, along with some applications to environmental and biological analysis. The advantage of the miniaturization is not only for the environmental compatibility but also for the developments of the high performance analytical systems. Down-sizing also makes it possible to investigate and introduce various compounds and materials as novel media (such as tailor-made materials and devices) in separation science. As a typical example of the novel miniaturized sample preparation system, the applications of fibrous materials for microcolumn liquid-phase separation methods are described.

Sample preparation with fiber-in-tube solid-phase microextraction for capillary electrophoretic separation of tricyclic antidepressant drugs in human urine

Solid-phase microextraction (SPME) is a solvent-free sample preparation technique using a thin coating attached to the surface of a fused silica-fiber as the extraction medium, which has been successfully applied to the analysis of a wide variety of compounds by coupling to gas chromatography (GC). In recent years, in-tube SPME using GC capillary column as the extraction medium has also been developed and coupled with liquid chromatography (LC) for the preconcentration of nonvolatile compounds. In this study, an on-line interface between the fiber-in-tube SPME and capillary electrophoresis (CE) has been developed, and the preconcentration and separation of four tricyclic antidepressant (TCA) drugs, amitriptyline, imipramine, nortriptyline, and desipramine, were performed with the hyphenated system. Under the optimized condition, a better extraction performance than conventional in-tube SPME was obtained, even the length of the extraction medium was much shorter. The results clearly indicated that the fiber was working effectively as an extraction medium. For the separation of these four TCAs, capillary electrophoretic separation with beta-cyclodextrin as the buffer additive has been employed and the application of the developed system to the analysis of complex sample mixtures in a biological matrix is also demonstrated.