Tissue partitioning of cadmium in transgenic tobacco seedlings and field grown plants expressing the mouse metallothionein I gene

Tobacco as an efficient metal accumulator

Tobacco (Nicotiana tabacum L.) is an important industrial crop plant. However, it efficiently accumulates metals, primarily cadmium (Cd) and also zinc (Zn), in its leaves. Therefore, it could be a source of cadmium intake by smokers. On the other hand, as a high leaf metal accumulator, it is widely used for phytoremediation of metal-contaminated soil. Both issues provide an important rationale for investigating the processes regulating metal homeostasis in tobacco. This work summarizes the results of research to date on the understanding of the molecular mechanisms determining the effective uptake of Zn and Cd, their translocation into shoots and accumulation in leaves. It also discusses the current state of research to improve the phytoremediation properties of tobacco through genetic modification and to limit leaf Cd content for the tobacco industry.

Vacuolar Transporters for Cadmium and Arsenic in Plants and their Applications in Phytoremediation and Crop Development

Soil contamination by heavy metals and metalloids such as cadmium (Cd) and arsenic (As) poses a major threat to the environment and to human health. Vacuolar sequestration is one of the main mechanisms by which plants control toxic materials including Cd and As. Understanding the mechanisms of heavy metal tolerance and accumulation can be useful for both phytoremediation and safe crop development. In this review, we summarize recent advances in deciphering the molecular mechanisms underlying vacuolar sequestration of Cd and As, and discuss potential biotechnological applications of this knowledge and efforts towards attaining these goals.

The potential of genetic engineering of plants for the remediation of soils contaminated with heavy metals

The genetic engineering of plants to facilitate the reclamation of soils and waters contaminated with inorganic pollutants is a relatively new and evolving field, benefiting from the heterologous expression of genes that increase the capacity of plants to mobilize, stabilize and/or accumulate metals. The efficiency of phytoremediation relies on the mechanisms underlying metal accumulation and tolerance, such as metal uptake, translocation and detoxification. The transfer of genes involved in any of these processes into fast-growing, high-biomass crops may improve their reclamation potential. The successful phytoextraction of metals/metalloids and their accumulation in aerial organs have been achieved by expressing metal ligands or transporters, enzymes involved in sulfur metabolism, enzymes that alter the chemical form or redox state of metals/metalloids and even the components of primary metabolism. This review article considers the potential of genetic engineering as a strategy to improve the phytoremediation capacity of plants in the context of heavy metals and metalloids, using recent case studies to demonstrate the practical application of this approach in the field.

Root-selective expression of AtCAX4 and AtCAX2 results in reduced lamina cadmium in field-grown Nicotiana tabacum L

To assess the impact of enhanced root vacuole cadmium (Cd) sequestration on leaf Cd accumulation under a low Cd dose, as generally occurs in agriculture, leaf Cd accumulation was examined in field-grown tobacco plants expressing genes encoding the high-capacity-Cd, tonoplast-localized, divalent cation/H antiporters AtCAX4 and AtCAX2 (AtCAX, Arabidopsis cation exchanger). It has been shown previously that root tonoplast vesicles isolated from plants expressing these genes, directed by root-selective promoters, show enhanced Cd transport activity, and young plants show enhanced root Cd accumulation when grown in solution culture containing 0.02 microM Cd, a moderate Cd dose. In this article, we present results which show that the lower leaves of mature plants expressing AtCAX2 or AtCAX4, under the control of two different root-selective promoters, accumulate 15%-25% less lamina Cd than control plants when grown in the field (3 years, three different collection methods). Reciprocal grafting experiments of AtCAX2 shoots onto control roots (and vice versa), grown in solution culture with 0.005 microM Cd, indicated that the root controls Cd translocation and accumulation in the shoot in control and AtCAX2 and AtCAX4 tobacco plants exposed to low Cd concentration. The results are consistent with a model in which supplementation of Cd/H antiporter activity in root cell tonoplasts enhances root Cd sequestration, resulting in decreased translocation of Cd to the shoot of field-grown plants. These results suggest that human Cd intake from food and tobacco use could be reduced via the enhancement of root vacuolar sequestration of this pollutant.

Generation of mercury-hyperaccumulating plants through transgenic expression of the bacterial mercury membrane transport protein MerC

The merC gene from Acidithiobacillus ferrooxidans functions as a mercury uptake pump. MerC protein localizes in the cytoplasmic membrane of plant cells. When Arabidopsis thaliana and tobacco plants were transformed with the merC gene under the control of the Cauliflower mosaic virus 35S promoter, the resulting overexpression of merC rendered the host plants hypersensitive to Hg2+ and they accumulated approximately twice as much Hg2+ ion as the wild type plants. Thus, bacterial mercuric ion transporters such as MerC may be useful molecular tools for producing transgenic plants that hyperaccumulate Hg2+ ion.

Prospects of genetic engineering of plants for phytoremediation of toxic metals

Bioremediation is gaining a lot of importance in recent times as an alternate technology for removal of elemental pollutants in soil and water, which require effective methods of decontamination. Phytoremediation--the use of green plants to remove, contain or render harmless environmental pollutants--may offer an effective, environmentally nondestructive and cheap remediation method. The use of genetic engineering to modify plants for metal uptake, transport and sequestration may open up new avenues for enhancing efficiency of phytoremediation. Metal chelator, metal transporter, metallothionein (MT), and phytochelatin (PC) genes have been transferred to plants for improved metal uptake and sequestration. Transgenic plants, which detoxify/accumulate cadmium, lead, mercury, arsenic and selenium have been developed. A better understanding of the mechanisms of rhizosphere interaction, uptake, transport and sequestration of metals in hyperaccumulator plants will lead to designing novel transgenic plants with improved remediation traits. As more genes related to metal metabolism are discovered, facilitated by the genome sequencing projects, new vistas will be opened up for development of efficient transgenic plants for phytoremediation.

Yeast metallothionein in transgenic tobacco promotes copper uptake from contaminated soils

Metallothioneins (MTs) are metal-binding proteins that confer heavy metal tolerance and accumulation in yeast. To augment higher plant metal sequestration, the yeast metallothionein (CUP 1) was introduced into tobacco plants. The CUP 1 gene expression and copper and cadmium phytoextraction were determined. To confirm transformation, selfed and kanamycin-resistant third generation plants were subjected to DNA blot and polymerase chain reaction (PCR) analysis. A 4 mM CuSO(4) stress for 7 days resulted in a decline in CUP 1 transcripts versus nonstress conditions. Despite low mRNA levels, CUP 1 transformants accumulated up to seven times more copper in older versus younger leaves during copper stress. Pooled leaves of transgenic plants grown in soils from copper stamp-sands contained two to three times the copper content as that of the control plants. Unlike some previous reports featuring MT overexpression in plants, CUP 1 seedlings did not significantly sequester or demonstrate tolerance to CdCl(2). Using this transgenic approach, yeast CUP 1 expression under nonstressed conditions contributed to copper metal phytoextraction during a subsequent copper challenge. This strategy could be incorporated into plants designed for enhanced phytoremediation of metal contaminants.

Phytoremediation: a technology using green plants to remove contaminants from polluted areas

Phytoremediation is an emerging cost-effective, non-intrusive, esthetically pleasing, and low cost technology using the remarkable ability of plants to concentrate elements and compounds from the environment and to metabolize various molecules in their tissues. Phytoremediation technology is applicable to a broad range of contaminants, including metals and radionuclides, as well as organic compounds like chlorinated solvents, polychlorobiphenyls, polycyclic aromatic hydrocarbons, pesticides/insecticides, explosives, and surfactants. The use of plants to transport and concentrate metals from the soil into the harvestable parts of roots and above-ground shoots, usually called 'phytoextraction', has appeared on the scene as a valid alternative to traditional physicochemical remediation methods that do not provide acceptable solutions for the removal of metals from soils. Positive results are becoming available regarding the ability of plants to degrade certain organic compounds. Nonetheless, despite the firm establishment of phytoremediation technology in the literature and in extensive research study and in small-scale demonstrations, full-scale applications are currently limited to a small number of projects. At present, the phytoremediation of metal pollutants from the environment could be approaching commercialization.

Differential expression and characterization of three metallothionein-like genes in Cavendish banana (Musa acuminata)

Metallothioneins (MTs) are cysteine-rich polypeptides that are involved in metal detoxification and homeostasis in both prokaryotes and eukaryotes. In this study, we report the isolation and characterization of three members (MT2A, MT2B and MT3) of the MT-like gene family from ripening banana fruit and their differential expression in various banana organs and during fruit development and ripening. All members of the MT-like gene encode small cysteine-rich polypeptides of 65-79 amino acid residues. MT2A shared a high sequence similarity (54-77%) with several type-2 MTs in plants, while MT3 was highly homologous (51-61%) with type-3 MTs. The three members expressed differentially in various organs but transcripts were generally more abundant in reproductive than vegetative organs. During fruit development, the MT2A transcript was barely detectable in ovary but increased to a high level in young fruit at 20 days after shooting (DAS) and declined gradually thereafter as fruit developed. In contrast, both MT2B and MT3 expressed poorly in young fruits (20-60 DAS) and transcripts were detected only in fruits at later stages of development. As ripening progressed, expression of MT2A decreased but that of MT3 increased. Expression of MT members during ripening appeared to be differentially regulated by ethylene, whose levels were low in FG and TY fruit but surged climacteristically in MG and declined sharply as ripening advanced further. Exogenous application of ethylene at 5 ppm or higher concentrations down-regulated MT2A expression and the inhibitory effect of ethylene could be partially suppressed by the presence of norbornadiene, an inhibitor of ethylene action. Ethylene had no effect on transcript accumulation of MT2B and MT3. However, MT3 expression was greatly enhanced in response to metals such as CdSO4, CuSO4 and ZnSO4. These results suggest that increased MT3 expression may be associated with excess metal ions present in ripening fruit tissues. This study also provided evidence, for the first time, that ethylene and metals play a regulatory role in expression of MT-like genes in banana.

Metal-binding proteins and peptides in bioremediation and phytoremediation of heavy metals

The expression of metal-binding proteins or peptides in microorganisms and plants in order to enhance heavy metal accumulation and/or tolerance has great potential. Several different peptides and proteins have been explored. This review focuses on cadmium (Cd) because of the significant importance of this metal and because of its global presence in many food materials.

Genetic engineering in the improvement of plants for phytoremediation of metal polluted soils

Metal concentrations in soils are locally quite high, and are still increasing due to many human activities, leading to elevated risk for health and the environment. Phytoremediation may offer a viable solution to this problem, and the approach is gaining increasing interest. Improvement of plants by genetic engineering, i.e. by modifying characteristics like metal uptake, transport and accumulation as well as metal tolerance, opens up new possibilities for phytoremediation. So far, only a few cases have been reported where one or more of these characteristics have been successfully altered; e.g. mercuric ion reduction causing improved resistance and phytoextraction, and metallothionein causing enhanced cadmium tolerance. These, together with other approaches and potentially promising genes for transformation of target plants are discussed.

Bioremediation of Heavy Metal Pollution Exploiting Constituents, Metabolites and Metabolic Pathways of Livings. A Review

Removal of heavy metals from the soil and water or their remediation from the waste streams "at source" has been a long-term challenge. During the recent era of environmental protection, the use of microorganisms for the recovery of metals from waste streams as well as employment of plants for landfill applications has generated growing attention. Many studies have demonstrated that both prokaryotes and eukaryotes have the ability to remove metals from contaminated water or waste streams. They sequester metals from soils and sediments or solubilize them to aid their extraction. The proposed microbial processes for bioremediation of toxic metals and radionuclides from waste streams employ living cells and non-living biomass or biopolymers as biosorbents. Microbial biotransformation of metals or metalloids results in an alteration of their oxidation state or in their alkylation and subsequent precipitation or volatilization. Specific metabolic pathways leading to precipitation of heavy metals as metal sulfides, phosphates or carbonates possess significance for possible biotechnology application. Moreover, the possibility of altering the properties of living species used in heavy metal remediation or constructing chimeric organisms possessing desirable features using genetic engineering is now under study in many laboratories. The encouraging evidence as to the usefulness of living organisms and their constituents as well as metabolic pathways for the remediation of metal contamination is reviewed here. A review with 243 references.

Structure and function of metal chelators produced by plants: the case for organic acids, amino acids, phytin, and metallothioneins

Plants produce a range of ligands for cadmium (Cd), copper (Cu), nickel (Ni), and zinc (Zn). Cd- and Zn-citrate complexes are prevalent in leaves, even though malate is more abundant. In the xylem sap moving from roots to leaves, citrate and histidine are the principal ligands for Cu, Ni, and Zn. Phosphorus-rich globular bodies in young roots are probably Zn-phytate. Metallothioneins (MTs) are cysteine (Cys)-rich ligands. Plants produce class II MTs (MT-IIs) which differ from the archetypal mammalian MT-I in the location and number of Cys. The Ec protein from wheat embryos has Cys in three domains, binds Zn, and disappears with seedling development. The first 59 amino acids have been sequenced for the protein. Fifty-eight genes for MT-IIs, from a range of plants and tissues, predict proteins with Cys in two domains. Most of the predicted proteins have not been isolated, and their metal binding is poorly documented. Three protein bands, corresponding to six MT genes, have been isolated from Arabidopsis, and the amino acids sequenced for nine fragments. The MT-IIIs are atypical, nontranslationally synthesized polypeptides with variously repeating gamma-glutamylcysteine units. Of the five families known, those with carboxy-terminal glycine are the most widespread among plants, algae, and certain yeasts. A heterogeneous grouping of these molecules form Cd-binding complexes with tetrahedral coordination and a Cd-sulfur interatomic distance of 2.52 A. One complex is cytosolic, the dominant one is vacuolar. Together, they can bind a large proportion of cellular Cd; other ligands may also function. Little is known about the counterpart situation for Cu and Zn.

Characterization of gene repertoires at mature stage of citrus fruits through random sequencing and analysis of redundant metallothionein-like genes expressed during fruit development

We carried out a random sequencing of cDNA library derived from mature citrus fruit (Citrus unshiu Marc.) for identifying the gene repertoires expressed at the mature stage. Among 297 clones analyzed, 195 cDNA clones (65.7%) were putatively identified to previously characterized genes with optimized (OPT) scores of >/=200 through a homology search to DNA database, whereas 102 clones (34.3%) resulted in low OPT scores (<200) and did not show any significant sequence identity with previously published genes. Among them, clones homologous to metallothionein (MT)-like genes appeared 62 times, being mostly redundant, and accounting for about 20.9% of the total 297 clones. To gain a better understanding of the MT-like genes, two types of cDNA clones were isolated. One clone (CitMT36) resembled the type 2 MT gene containing Cys-X-Cys motifs in both N- and C-terminal, but the consensus sequence in the N-terminal domain, Cys-Cys and Cys-X-X-Cys was modified in CitMT36 to X-Cys and Cys-X-X-X, respectively. We suggest that these form a 'novel type 2' group of MT-like clones. The other clone (CitMT45) showed homology to type 3 MT-like genes, which have been found in mostly fruit tissues so far. By Southern blot analysis, both clones showed one or two bands, suggesting that both CitMT36 and CitMT45 are present in single or a few copies in the citrus genome. Transcripts of CitMT36 were evenly detected in all tissues examined, whereas those of CitMT45 were detected primarily in fruit during the developmental phase. Neither of the MT-like genes was induced in leaves by Zn and Cu. Collectively, MT-like genes from citrus would be regulated differentially depending on the fruit developmental stage and organs, indicating a change in their expression under the different physiological and molecular environment of fruit cells.

Phytoremediation of soil metals

The phytoremediation of metal-contaminated soils offers a low-cost method for soil remediation and some extracted metals may be recycled for value. Both the phytoextraction of metals and the phytovolatilization of Se or Hg by plants offer great promise for commercial development. Natural metal hyperaccumulator phenotype is much more important than high-yield ability when using plants to remove metals from contaminated soils. The hypertolerance of metals is the key plant characteristic required for hyperaccumulation; vacuolar compartmentalization appears to be the source of hypertolerance of natural hyperaccumulator plants. Alternatively, soil Pb and Cr6+ may be inactivated in the soil by plants and soil amendments (phytostabilization). Little molecular understanding of plant activities critical to phytoremediation has been achieved, but recent progress in characterizing Fe, Cd and Zn uptake by Arabidopsis and yeast mutants indicates strategies for developing transgenic improved phytoremediation cultivars for commercial use.