The influence of food emulsifiers on fat and sugar dispersions in oils. I. Adsorption, sedimentation

Nucleation of melt: From fundamentals to dispersed systems

The most evident aspects of a first order transition of a system from an old to a new phase, are the presence of a discontinuity at the interface between both phases and the thermal effects related to the latent heat exchanged with the surrounding environment. These effects are the result of a sequence of events promoted by thermodynamic conditions persisting over the equilibrium in a metastable state. The breakdown of metastability is promoted by infinitesimal energy fluctuations resulting in the germination of clusters of the new phase that can grow to a critical size (nucleus) and then develop or vanish. Examples of these sequences are common in various technological fields such as combustion, food processing, pharmaceutical manufacturing, condensation, and phase change heat transfer, etc. This work aims to highlight a logical path that leads the readers from the fundamental phenomenology to the most intricated aspects of the nucleation within dispersed systems such as oil-in-water emulsions. Differences between the homogeneous and heterogeneous mechanisms are, under the light of the Classical Nucleation Theory (CNT), presented in bulk and confined systems until defining a minimum confinement size. By collecting insights coming from a rich scientific literature mostly focused on the stability of emulsified systems, the discussion is then on the aspects related to the surface related mechanisms. Two main aspects are then considered: a) the wettability of the nucleating cluster by the surrounding melt; b) the affinity between the adsorbed layer, where a surfactant is located, and the oil melt phase (mainly n-alkanes and triacylglycerols with different moieties). In cases where nucleation is dominating over the dewetting of the nucleus, the contact angle can be considered as a constant value. The affinity in terms of molecular features between the surfactant and the oil phase can promote the template effect. Several factors seem to play a role in this interaction such as the thermal characteristics of the surfactant and comparable dimensions between the molecule (or fractions) of the dispersed compound and the tail of the surfactant.

Capillary Structured Suspensions from In Situ Hydrophobized Calcium Carbonate Particles Suspended in a Polar Liquid Media

We demonstrate that capillary suspensions can be formed from hydrophilic calcium carbonate particles suspended in a polar continuous media and connected by capillary bridges formed of minute amounts of an immiscible secondary liquid phase. This was achieved in two different polar continuous phases, water and glycerol, and three different oils, oleic acid, isopropyl myristate, and peppermint oil as a secondary liquid phase. The capillary structuring of the suspension was made possible through local in situ hydrophobization of the calcium carbonate particles dispersed in the polar media by adding very small amounts of oleic acid to the secondary liquid phase. We observed a strong increase in the viscosity of the calcium carbonate suspension by several orders of magnitude upon addition of the secondary oil phase compared with the same suspension without secondary liquid phase or without oleic acid. The stability and the rheological properties of the obtained capillary structured materials were studied in relation to the physical properties of the system such as the particle size, interfacial tension between the primary and secondary liquid phases, as well as the particle contact angle at this liquid-liquid interface. We also determined the minimal concentrations of the secondary liquid phase at fixed particle concentration as well as the minimal particle concentration at fixed secondary phase concentration needed to form a capillary suspension. Capillary suspensions formed by this method can find application in structuring pharmaceutical and food formulations as well as a variety of home and personal care products.

Sheared edible oils studied using dissipative particle dynamics and ultra small angle X-ray scattering: TAGwood orientation aggregation and disaggregation

The following work examines the aggregation of supramolecular triglyceride crystalline structures under a shear regime using Dissipative Particle Dynamics and Ultra-Small Angle X-Ray Scattering.

Effect of Span 60 on the Microstructure, Crystallization Kinetics, and Mechanical Properties of Stearic Acid Oleogels: An In-Depth Analysis

Modulation of crystallization of stearic acid and its derivatives is important for tuning the properties of stearate oleogels. The present study delineates the crystallization of stearic acid in stearate oleogels in the presence of Span 60. Microarchitecture analysis revealed that stearic acid crystals in the oleogels changed its shape from plate-like structure to a branched architecture in the presence of Span 60. Consequently, a significant variation in the mobility of the solute molecules inside the oleogel (Fluorescence recovery after photobleaching studies, FRAP analysis) was observed. Thermal analysis (gelation kinetics and DSC) revealed shortening of nucleation induction time and secondary crystallization with an increase in the Span 60 concentration. Furthermore, isosolid diagram suggested better physical stability of the formulations at higher proportions of Span 60. XRD analysis indicated that there was a decrease in the crystal size and the crystallinity of the stearic acid crystals with an increase in Span 60 concentration in the Span 60 containing oleogels. However, crystal growth orientation was unidirectional and found unaltered with Span 60 concentration (Avarmi analysis using DSC data). The mechanical study indicated a composition-dependent variation in the viscoelastic properties (instantaneous [τ1 ], intermediate [τ2 ], and delayed [τ3 ] relaxation times) of the formulations. In conclusion, Span 60 can be used to alter the kinetics of the crystallization, crystal habit and crystal structure of stearic acid. This study provides a number of clues that could be used further for developing oleogel based formulation.

Stabilising emulsion-based colloidal structures with mixed food ingredients

The physical scientist views food as a complex form of soft matter. The complexity has its origin in the numerous ingredients that are typically mixed together and the subtle variations in microstructure and texture induced by thermal and mechanical processing. The colloid science approach to food product formulation is based on the assumption that the major product attributes such as appearance, rheology and physical stability are determined by the spatial distribution and interactions of a small number of generic structural entities (biopolymers, particles, droplets, bubbles, crystals) organised in various kinds of structural arrangements (layers, complexes, aggregates, networks). This review describes some recent advances in this field with reference to three discrete classes of dispersed systems: particle-stabilised emulsions, emulsion gels and aerated emulsions. Particular attention is directed towards explaining the crucial role of the macromolecular ingredients (proteins and polysaccharides) in controlling the formation and stabilisation of the colloidal structures. The ultimate objective of this research is to provide the basic physicochemical insight required for the reliable manufacture of novel structured foods with an appealing taste and texture, whilst incorporating a more healthy set of ingredients than those found in many existing traditional products.

Comparison of Pickering and network stabilization in water-in-oil emulsions

We compared the efficacy of Pickering crystals, a continuous phase crystal network, and a combination thereof against sedimentation and dispersed phase coalescence in water-in-oil (W/O) emulsions. Using 20 wt % water-in-canola oil emulsions as our model, glycerol monostearate (GMS) permitted Pickering-type stabilization, whereas simultaneous usage of hydrogenated canola oil (HCO) and glycerol monooleate (GMO) primarily led to network-stabilized emulsions. A minimum of 4 wt % GMS or 10 wt % HCO was required for long-term sedimentation stability. Although there were no significant differences between the two in mean droplet size with time, the free water content of the network-stabilized emulsions was higher than Pickering-stabilized emulsions, suggesting higher instability. Microscopy revealed the presence of crystal shells around the dispersed phase in the GMS-stabilized emulsions, whereas in the HCO-stabilized emulsion, spherulitic growth in the continuous phase and on the droplet surface occurred. The displacement energy (E(disp)) to detach crystals from the oil-water interface was ∼10(4) kT, and was highest for GMS crystals. Thermal cycling to induce dispersed phase coalescence of the emulsions resulted in desorption of both GMS and GMO from the interface, which we ascribed to solute-solvent hydrogen bonding between the emulsifier molecules and the solvent oil, based on IR spectra. Overall, Pickering crystals were more effective than network crystals for emulsion stabilization. However, the thermal stability of all emulsions was hampered by the diffusion of the molten emulsifiers from the interface.

Microstructure of fat bloom development in plain and filled chocolate confections

Temperature-controlled environmental scanning electron microscopy was used to examine the microstructural changes in plain solid chocolate and its counterpart stored against a tricaprylin-based filling cream. Sample storage at 26 °C for 40 days led to significant changes in microstructure as a function of time. Surface imperfections (pores, pits, etc.) initially present on the filled confection disappeared within two days whereas those on the control did not throughout the storage period. Morphological changes on the surface of the control were dominated by the growth of needle-like crystals whereas spherulites appeared on the filled chocolate, with large crystals (upwards of 100 microns in length, in some cases) observed in both cases. From a microstructural perspective, both diffusion and capillarity appear to have a part in fat bloom initiation and propagation, though temperature and the presence of a filling fat strongly dictate which mechanism will dominate.