Somatic hybrid plants of potato and tomato regenerated from fused protoplasts

Genetic diversification of allohexaploid Brassica hybrids (AABBCC) using a fertile octoploid with excessive C genome set (AABBCCCC)

MAIN CONCLUSION

Using octoploid somatic hybrids with excessive C genome sets, AABBCCCC, a diverse allohexaploid, AABBCC, was produced by C genome reduction through subsequent crossing with various AABB cultivars. Even when somatic hybrids are produced, the plants that are produced are rarely in themselves an innovative crop. In this study, we used somatic hybrids of Brassica juncea (AABB) and B. oleracea (CC) as model cases for the genetic diversification of the somatic hybrids. One cell of 'Akaoba Takana' (B. juncea) and two cells of 'Snow Crown' (B. oleracea) were fused to create several somatic hybrids with excessive C genomes, AABBCCCC. Using AABBCCCC somatic hybrids as mother plants and crossing with 'Akaoba Takana', the AABBCC progenies were generated. When these AABBCC plants were self-fertilized, and flow cytometric (FCM) analysis was performed on the next generations, differences in the relative amount of genome size variation were observed, depending on the different AABBCCCC parents used for AABBCC creation. Further self-progeny was obtained for AABBCC plants with a theoretical allohexaploid DNA index by FCM. However, as the DNA indices of the progeny populations varied between plants used and aneuploid individuals still occurred in the progeny populations, it was difficult to say that the allohexaploid genome was fully stabilized. Next, to obtain genetic diversification of the allohexaploid, different cultivars of B. juncea were crossed with AABBCCCC, resulting in diverse AABBCC plants. Genetic diversity can be further expanded by crossbreeding plants with different AABBCC genome sets. Although genetic stability is necessary to ensure in the later generations, the results obtained in this study show that the use of somatic hybrids with excess genomes is an effective strategy for creating innovative crops.

Overcoming roadblocks for in vitro nurseries in plants: induction of meiosis

Efforts to increase genetic gains in breeding programs of flowering plants depend on making genetic crosses. Time to flowering, which can take months to decades depending on the species, can be a limiting factor in such breeding programs. It has been proposed that the rate of genetic gain can be increased by reducing the time between generations by circumventing flowering through the in vitro induction of meiosis. In this review, we assess technologies and approaches that may offer a path towards meiosis induction, the largest current bottleneck for in vitro plant breeding. Studies in non-plant, eukaryotic organisms indicate that the in vitro switch from mitotic cell division to meiosis is inefficient and occurs at very low rates. Yet, this has been achieved with mammalian cells by the manipulation of a limited number of genes. Therefore, to experimentally identify factors that switch mitosis to meiosis in plants, it is necessary to develop a high-throughput system to evaluate a large number of candidate genes and treatments, each using large numbers of cells, few of which may gain the ability to induce meiosis.

A More Accessible, Time-Saving, and Efficient Method for In Vitro Plant Regeneration from Potato Protoplasts

Both obtaining high-yielding, viable protoplasts and following reliable regeneration protocols are prerequisites for the continuous expansion and development of newly emerging systems involving protoplast utilization. This study determines an efficient process from protoplast isolation to shoot regeneration in vitro. The maximum yield of protoplast extraction, which was 6.36 ± 0.51 × 10⁶ protoplasts/g fresh weight (FW), was approximately 3.7 times higher than that previously reported for potato protoplasts. To obtain data, wounded leaves were used by partially cutting both sides of the midrib, and isolated protoplasts were purified by the sucrose cushion method, with a sucrose concentration of 20%. We confirmed a significant effect on the extraction efficiency by measuring enzymolysis during a 6 h period, with three times more washing buffer than the amount normally used. Protoplasts fixed in alginate lenses with appropriate space were successfully recovered and developed into microcalli 2 weeks after culture. In addition, to induce high efficiency regeneration from protoplasts, calli in which greening occurred for 6 weeks were induced to develop shoots in regeneration medium solidified by Gelrite, and they presented a high regeneration efficiency of 86.24 ± 11.76%.

Highly Efficient Leaf Base Protoplast Isolation and Transient Expression Systems for Orchids and Other Important Monocot Crops

Versatile protoplast platforms greatly facilitate the development of modern botany. However, efficient protoplast-based systems are still challenging for numerous horticultural plants and crops. Orchids are globally cultivated ornamental and medicinal monocot plants, but few efficient protoplast isolation and transient expression systems have been developed. In this study, we established a highly efficient orchid protoplast isolation protocol by selecting suitable source materials and optimizing the enzymatic conditions, which required optimal D-mannitol concentrations (0.4-0.6 M) combined with optimal 1.2% cellulose and 0.6% macerozyme, 5 μM of 2-mercaptoethanol and 6 h digestion. Tissue- and organ-specific protoplasts were successfully isolated from young leaves [∼3.22 × 106/g fresh weight (FW)], flower pedicels (∼5.26 × 106/g FW), and young root tips (∼7.66 × 105/g FW) of Cymbidium orchids. This protocol recommends the leaf base tissues (the tender part of young leaves attached to the stem) as better source materials. High yielding viable protoplasts were isolated from the leaf base of Cymbidium (∼2.50 × 107/g FW), Phalaenopsis (1.83 × 107/g FW), Paphiopedilum (1.10 × 107/g FW), Dendrobium (8.21 × 106/g FW), Arundina (3.78 × 106/g FW) orchids, and other economically important monocot crops including maize (Zea mays) (3.25 × 107/g FW) and rice (Oryza sativa) (4.31 × 107/g FW), which showed marked advantages over previous mesophyll protoplast isolation protocols. Leaf base protoplasts of Cymbidium orchids were used for polyethylene glycol (PEG)-mediated transfection, and a transfection efficiency of more than 80% was achieved. This leaf base protoplast system was applied successfully to analyze the CsDELLA-mediated gibberellin signaling in Cymbidium orchids. We investigated the subcellular localization of the CsDELLA-green fluorescent protein fusion and analyzed the role of CsDELLA in the regulation of gibberellin to flowering-related genes via efficient transient overexpression and gene silencing of CsDELLA in Cymbidium protoplasts. This protoplast isolation and transient expression system is the most efficient based on the documented results to date. It can be widely used for cellular and molecular studies in orchids and other economically important monocot crops, especially for those lacking an efficient genetic transformation system in vivo.

Agrobacterium: A Genome-Editing Tool-Delivery System

With the rapidly increasing global population, it will be extremely challenging to provide food to the world without increasing food production by at least 70% over the next 30 years. As we reach the limits of expanding arable land, the responsibility of meeting this production goal will rely on increasing yields. Traditional plant breeding practices will not be able to realistically meet these expectations, thrusting plant biotechnology into the limelight to fulfill these needs. Better varieties will need to be developed faster and with the least amount of regulatory hurdles. With the need to add, delete, and substitute genes into existing genomes, the field of genome editing and gene targeting is now rapidly developing with numerous new technologies coming to the forefront. Agrobacterium-mediated crop transformation has been the most utilized method to generate transgenic varieties that are better yielding, have new traits, and are disease and pathogen resistant. Genome-editing technologies rely on the creation of double-strand breaks (DSBs) in the genomic DNA of target species to facilitate gene disruption, addition, or replacement through either non-homologous end joining or homology-dependent repair mechanisms. DSBs can be introduced through the use of zinc-finger nucleases (ZFNs), transcription activator-like effector nucleases (TALENs), or clustered regularly interspersed short palindromic repeats (CRISPR)/Cas nucleases, among others. Agrobacterium strains have been employed to deliver the reagents for genome editing to the specific target cells. Understanding the biology of transformation from the perspective not only of Agrobacterium, but also of the host, from processing of T-DNA to its integration in the host genome, has resulted in a wealth of information that has been used to engineer Agrobacterium strains having increased virulence. As more technologies are being developed, that will help overcome issues of Agrobacterium host range and random integration of DNA, combined with highly sequence-specific nucleases, a robust crop genome-editing toolkit finally seems attainable.

An Introduction to Plant Tissue Culture: Advances and Perspectives

Plant tissue culture techniques are the most frequently used biotechnological tools for basic and applied purposes ranging from investigation on plant developmental processes, functional gene studies, commercial plant micropropagation, generation of transgenic plants with specific industrial and agronomical traits, plant breeding and crop improvement, virus elimination from infected materials to render high-quality healthy plant material, preservation and conservation of germplasm of vegetative propagated plant crops, and rescue of threatened or endangered plant species. Additionally, plant cell and organ cultures are of interest for the production of secondary metabolites of industrial and pharmaceutical interest. New technologies, such as the genome editing ones combined with tissue culture and Agrobacterium tumefaciens infection, are currently promising alternatives for the highly specific genetic manipulation of interesting agronomical or industrial traits in crop plants. Application of omics (genomics, transcriptomics, and proteomics) to plant tissue culture will certainly help to unravel complex developmental processes such as organogenesis and somatic embryogenesis, which will probably enable to improve the efficiency of regeneration protocols for recalcitrant species. Additionally, metabolomics applied to tissue culture will facilitate the extraction and characterization of complex mixtures of natural plant products of industrial interest. General and specific aspects and applications of plant tissue culture and the advances and perspectives are described in this edition.

Autonomous xenogenic cell fusion of murine and chick skeletal muscle myoblasts

Cell-cell fusion has been a great technology to generate valuable hybrid cells and organisms such as hybridomas. In this study, skeletal muscle myoblasts were utilized to establish a novel method for autonomous xenogenic cell fusion. Myoblasts are mononuclear myogenic precursor cells and fuse mutually to form multinuclear myotubes. We generated murine myoblasts (mMBs) expressing green fluorescent protein (GFP) termed mMB-GFP, and the chick myoblasts (chMBs) expressing Discosoma red fluorescent protein (DsRed) termed chMB-DsRed. mMB-GFP and chMB-DsRed were cocultured and induced to differentiate. After 24 h, the multinuclear myotubes expressing both GFP and DsRed were observed, indicating that mMBs and chMBs interspecifically fuse. These GFP+ /DsRed+ hybrid myotubes were able to survive and grew to hyper-multinucleated mature form. We also found that undifferentiated mMB-GFP efficiently fuse to the chMB-DsRed-derived myotubes. This is the first evidence for the autonomous xenogenic fusion of mammalian and avian cells. Myoblast-based fusogenic technique will open up an alternative direction to create novel hybrid products.

Expanding the Symbiodinium (Dinophyceae, Suessiales) Toolkit Through Protoplast Technology

Dinoflagellates within the genus Symbiodinium are photosymbionts of many tropical reef invertebrates, including corals, making them central to the health of coral reefs. Symbiodinium have therefore gained significant research attention, though studies have been constrained by technical limitations. In particular, the generation of viable cells with their cell walls removed (termed protoplasts) has enabled a wide range of experimental techniques for bacteria, fungi, plants, and algae such as ultrastructure studies, virus infection studies, patch clamping, genetic transformation, and protoplast fusion. However, previous studies have struggled to remove the cell walls from armored dinoflagellates, potentially due to the internal placement of their cell walls. Here, we produce the first Symbiodinium protoplasts from three genetically and physiologically distinct strains via incubation with cellulase and osmotic agents. Digestion of the cell walls was verified by a lack of Calcofluor White fluorescence signal and by cell swelling in hypotonic culture medium. Fused protoplasts were also observed, motivating future investigation into intra- and inter-specific somatic hybridization of Symbiodinium. Following digestion and transfer to regeneration medium, protoplasts remained photosynthetically active, regrew cell walls, regained motility, and entered exponential growth. Generation of Symbiodinium protoplasts opens exciting, new avenues for researching these crucial symbiotic dinoflagellates, including genetic modification.

Historical review of research on plant cell dedifferentiation

Plant cell dedifferentiation has long attracted interest as a key process for understanding the plasticity of plant development. In early studies, typical examples of plant cell dedifferentiation were described as physiological and cytological changes associated with wound healing or regenerative development. Subsequently, plant tissue and cell culture techniques, in which exciting progress was achieved after discovery of the hormonal control of cell proliferation and organogenesis in vitro in the 1950s, have been used extensively to study dedifferentiation. The pioneer studies of plant tissue/cell culture led to the hypothesis that many mature plant cells retain totipotency and related dedifferentiation to the initial step of the expression of totipotency. Plant tissue/cell cultures have provided experimental systems not only for physiological analysis, but also for genetic and molecular biological analysis, of dedifferentiation. More recently, proteomic, transcriptomic, and epigenetic analyses have been applied to the study of plant cell dedifferentiation. All of these works have expanded our knowledge of plant cell dedifferentiation, and current research is contributing to unraveling the molecular mechanisms. The present article provides a brief overview of the history of research on plant cell dedifferentiation.

The place of asymmetric somatic hybridization in wheat breeding

Since its first development some 40 years ago, the application of the somatic hybridization technique has generated a body of hybrid plant material involving a wide combination of parental species. Until the late 1990s, the technique was ineffective in wheat, as regeneration from protoplasts was proving difficult to achieve. Since this time, however, a successful somatic hybridization protocol for wheat has been established and used to generate a substantial number of both symmetric and asymmetric somatic hybrids and derived materials, especially involving the parental combination bread wheat and tall wheatgrass (Thinopyrum ponticum). This review describes the current state of the art for somatic hybridization in wheat and focuses on its potential application for wheat improvement.

Genetic transfer in plants through interspecific protoplast fusion

Protoplasts of sexually incompatible species have been fused and in some combinations have given rise to somatic hybrid plants. Partial elimination of parental chromosomes from either species is common in such hybrids, but total chromosome loss has generally occurred only with phylogenetically unrelated pairings. Genetic function of one parent may be retained despite a complete loss of its chromosomes, suggesting that genetic introgression is possible in the absence of complete donor chromosomes. A model interspecific combination for such studies is the potato-tomato somatic hybrid for which numerous phenotypes and karyotypes are encountered at the outset, with a broader range observed in the second somatic generation.

[Monosomic alien addition lines: a new tool for studying and using plant genomics]

Interspecies hybridization and backcrossing is a means to transfer desirable genes from one species to another in breeding programs of higher plants. Monosomic alien addition lines (MAALs) can be produced via addition of single chromosome of an alien donor species to the entire chromosome complement of the recipient species. MAALs are powerful tools for elucidating genome structure and transferring genes. Backcrossing of MAALs to the recipient parent results in plants containing short overlapping introgressions, which cover the entire donor genome. These introgression lines can be used as vectors of alien genomic libraries in a recipient genetic background. In addition, a complete set of MAALs also serves as a library of the donor genome dissected into individual chromosome entities, which facilitates high-throughput marker allocation to individual donor chromosomes, and marker assignments and syntenic relationships can be compared between the donor chromosomes and the respective orthologous recipient chromosomes. Meanwhile, MAALs can be used to study the introgression mechanism and the pairing status of homologous chromosomes. In this review, we presented the production and properties of MAALs and highlighted their advantages for genetic breeding and fundamental researches.

Production of alien chromosome additions and their utility in plant genetics

Breeding programs aiming at transferring desirable genes from one species to another through interspecific hybridization and backcrossings often produce monosomic and disomic additions as intermediate crossing products. Such aneuploids contain alien chromosomes added to the complements of the recipient parent and can be used for further introgression programs, but lack of homoeologous recombination and inevitable segregation of the alien chromosome at meiosis make them often less ideal for producing stable introgression lines. Monosomic and disomic additions can have specific morphological characteristics, but more often they need additional confirmation of molecular marker analyses and assessment by fluorescence in situ hybridization with genomic and chromosome-specific DNA as probes. Their specific genetic and cytogenetic properties make them powerful tools for fundamental research elucidating regulation of homoeologous recombination, distribution of chromosome-specific markers and repetitive DNA sequences, and regulation of heterologous gene expression. In this overview we present the major characteristics of such interspecific aneuploids highlighting their advantages and drawbacks for breeding and fundamental research.

DNA markers in plant improvement: an overview

The progress made in DNA marker technology has been tremendous and exciting. DNA markers have provided valuable tools in various analyses ranging from phylogenetic analysis to the positional cloning of genes. The development of high-density molecular maps which has been facilitated by PCR-based markers, have made the mapping and tagging of almost any trait possible. Marker-assisted selection has the potential to deploy favorable gene combinations for disease control. Comparative studies between incompatible species using these markers has resulted in synteny maps which are useful not only in predicting genome organization and evolution but also have practical application in plant breeding. DNA marker technology has found application in fingerprinting genotypes, in determining seed purity, in systematic sampling of germplasm, and in phylogenetic analysis. This review discusses the use of this technology for the genetic improvement of plants.

Plant biotechnology for crop improvement

The typical crop improvement cycle takes 10-15 years to complete and includes germplasm manipulations, genotype selection and stabilization, variety testing, variety increase, proprietary protection and crop production stages. Plant tissue culture and genetic engineering procedures that form the basis of plant biotechnology can contribute to most of these crop improvement stages. This review provides an overview of the opportunities presented by the integration of plant biotechnology into plant improvement efforts and raises some of the societal issues that need to be considered in their application.

Lycopersicon assays of chemical/radiation genotoxicity for the study of environmental mutagens

From a literature survey, 21 chemicals are tabulated that have been evaluated in 39 assays for their clastogenic effects in Lycopersicon. Nineteen of the 21 chemicals are reported as giving a positive reaction (i.e. causing chromosome aberrations). Of these, five are reported positive with a dose response. In addition, 23 assays have been recorded for six types of radiation, all of which reacted positively. The results of 102 assays with 32 chemicals and seven types of radiation tested for the induction of gene mutations are tabulated, as well as 20 chemicals and/or radiation in combined treatments. The Lycopersicon esculentum (2n=24) assay is a very good plant bioassay for assessing chromosome damage both in mitosis and meiosis and for somatic mutations induced by chemicals and radiations. The Lycopersicon bioassay has been shown to be as sensitive and as specific an assay as other plant genotoxicity assays, such as Hordeum vulgare, Vicia faba, Crepis capillaris, Pisum sativum and Allium cepa and should be considered in further studies in assessing clastogenicity. Tests using L. esculentum can be made for a spectrum of mutant phenotypes of which many are identifiable in young seedlings.

Genomic in situ hybridization analysis of a trigenomic hybrid involving Solanum and Lycopersicon species

A 4x potato (+) tomato fusion hybrid (2n = 4x = 48) was successfully backcrossed with a diploid Lycopersicon pennellii (2n = 2x = 24). Genomic in situ hybridization (GISH) on somatic and meiotic chromosomes confirmed that the progenies were triploids (2n = 3x = 36) and possessed three different genomes: potato, tomato, and L. pennellii. Therefore, they have been called trigenomic hybrids. Total genomic probes of both Lycopersicon species were found to hybridize mutually, whereas the potato genome was clearly differentiated. During metaphase I, bivalents were formed predominantly between tomato and L. pennellii chromosomes and the univalents of potato chromosomes were most common. Trivalents in all cases included homoeologous chromosomes of potato, tomato, and L. pennellii. However, the triploids were totally sterile as determined from extensive crossing. On chromosome doubling of triploids by shoot regeneration from callus, hexaploids (2n = 6x = 72) were obtained. Despite exhibiting clear allohexaploid behaviour by forming 36 bivalents at meiosis, these were also completely sterile like their triploid counterparts. In spite of this drawback, the prospects of chromosome pairing between potato L. pennellii and Solanum genomes does open the possibilities for bringing the two genera close.

Identification of alien chromosomes through GISH and RFLP analysis and the potential for establishing potato lines with monosomic additions of tomato chromosomes

To increase the potential for establishing a complete series of tomato chromosome addition–sbstitution lines in a potato background, six new BC1progeny were produced. All of them originated from crosses between three different hexaploid potato (+) tomato fusion hybrids. Three different somatic hybrids, viz., C31-17-5, C31-17-24, and C31-17-51, were used as female parents, and four different tetraploids, viz., Katahdin, Frieslander, 6704-1, and AM66.42 were used as male parents. A characterisation of the genomes of the three fusion hybrids and the six BC1progenies (6739, 2001, 2002, 2003, 2004, and 2005) through genomic in situ hybridization and restriction fragment length polymorphism (RFLP) analysis indicated that there was preferential tomato chromosome elimination in the fusion hybrids. Similar analyses of the six BC1progeny indicated that a variable number of the alien tomato chromosomes (6–11) were present in individual plants. RFLP analysis using chromosome specific DNA probes indicated that BC1progenies had retained all 12 tomato chromosomes, albeit in different individual plants. This means that the available BC1progenies have the potential for establishing a complete series of tomato chromosome addition–substitution lines in a potato background.Key words: protoplast fusion hybrids, Solanum tuberosum, Lycopersicon esculentum, BC1progeny, in situ hybridization, RFLP analysis.

Somatic hybrids between Brassica juncea (L). Czern. and Diplotaxis harra (Forsk.) Boiss and the generation of backcross progenies

An attempt to transfer genes from droughttolerant Diplotaxis harra, a wild relative of Brassica species, to an elite oil-yielding cultivar, B-85, of mustard (Brassica juncea) was made through protoplast fusion, as the two plant systems are sexually incompatible. By following the standard protocol for PEG-mediated protoplast fusion followed by high pH, high Ca(++), DMSO treatment and appropriate cell-culture technique, 16 presumptive somatic hybrid plants could be regenerated. Chromosomal analysis of four such somatic hybrids revealed that three of them were asymmetric. Analysis of morphological characters, meiotic chromosomes, and esterase isoenzyme pattern revealed that all the somatic hybrids were different from each other. Furthermore four chromosomes of each genome could undergo homoeologous pairing at meiosis indicating the possibilities for genetic recombination and chromosomal rearrangements. Irregular distribution of chromosomes at anaphase-II at meiosis has been a consistent feature of these plants. Eventually, pollen of all the somatic hybrids showed complete infertility preventing the recovery of any selfed seed. Nevertheless, ovule fertility of one somatic hybrid was not totally impaired as it had set some seeds upon backcrossing with the B. juncea parent. The esterase isoenzyme banding pattern of 24 individual progeny plants of this backcross provided evidence for their recombinant nature. It was thus confirmed that a transfer of genetic traits from Diplotaxis harra to B. juncea had indeed taken place. Furthermore, it was conceptualised that a transfer of alien genes through the protoplast-fusion technique is primarily possible in situations where meiotic pairing of the chromosomes of the two participating genomes generates recombinant gametocytes which can pass through subsequent filial generations.

The first and second backcross progeny of the intergeneric fusion hybrids of potato and tomato after crossing with potato

Somatic fusion hybrids between the diploid potato and tomato were backcrossed to several genotypes of potato. Two ploidy levels of fusion hybrids, 4x and 6x, were used as female parents in backcrosses with five clones of 4x-potato. An estimate of the berry set and "seed set" in immature berries harvested 14-21 days after pollination indicated that crosses between certain combinations of 6x-fusion hybrids and male parents were more successful than others. The culture of over 4000 young seeds from berries harvested 2-2.5 weeks after pollination gave rise to a single seedling, 93.6701, from the cross between the 6x-fusion hybrid C 31-17-1 and the 4x-potato AM 66.42. This seedling was found to possess a pentaploid chromosome number, which was expected of a 6x × 4x cross. Isozyme analysis and DNA hybridisation studies confirmed that the seedling 93.6701 was indeed a backcross (BC1) progeny. Morphologically, this BC1 plant resembled potato with respect to plant habit, leaf shape, stolons and tuber characteristics, while some of the characters, such as floral morphology and the fragrance of the crushed leaves (typical of tomato), were intermediate. It was male sterile but could be successfully hybridized with 4x-potato through in vitro culture of yound seeds; thus, BC2 plants were obtained. The possibilities of backcrossing and the potential use of BC1 and BC2 plants in genetics and breeding are discussed.

Allotriploid somatic hybrids of diploid tomato (Lycopersicon esculentum Mill.) and monoploid potato (Solanum tuberosum L.)

Allotriploid somatic hybrids were obtained from fusions between protoplasts of diploid tomato and monohaploid potato. The selection of fusion products was carried out in two different ways: (1) The fusion of nitrate reductase-deficient tomato with potato gave rise only to hybrid calli if selection was performed on media lacking ammonium. Parental microcalli were rarely obtained and did not regenerate. (2) The fusion of cytoplasmic albino tomato with potato gave rise to albino and green hybrid calli and plants. Allotriploids were identified from the two somatic hybrid populations by counting chloroplast numbers in leaf guard cells and by flow cytometry of leaf tissue. Although some pollen fertility of allotriploids and pollen-tube growth of tomato, potato andLycopersicon pennellii into the allotriploid style were observed, no progeny could be obtained. The relevance of allotriploid somatic hybrids in facilitating limited gene transfer from potato to tomato is discussed.

Sexual and somatic hybridization in the genusLycopersicon

In recent years, a large number of reports have been published on the recovery of somatic hybrids in the genusLycopersicon and their potential use as a tool in plant breeding programs. Somatic hybridization as a way of enabling the incompatibility barriers which exist within the genusLycopersicon to be bypassed has attracted great interest. WildLycopersicon species harbor numerous interesting agronomic characteristics, which could be transferred to tomato by somatic hybridization. In particular, the production of asymmetric hybrids is explored as an approach to obtain the transfer of only a part of the nuclear genome of wildLycopersicon species. Considerable information is available on the fate of chloroplasts and mitochondria in fusion products inLycopersicon, and unfortunately, cybridization (transfer of chloroplasts and/or mitochondria) seems often difficult to achieve.

Fertile asymmetric somatic hybrids between Lycopersicon esculentum Mill. and Lycopersicon peruvianum var. dentatum Dun

Thirteen nuclear asymmetric hybrids were regenerated under selective conditions following fusion of chlorophyll-deficient protoplasts from cultivated tomato (Lycopersicon esculentum Mill.) and gamma-irradiated protoplasts from the wild species Lycopersicon peruvianum var. dentatum Dun. All hybrid plants were classified as being asymmetric based on morphological traits, chromosome numbers and isozyme patterns. The majority of the hybrids inherited Lycopersicon peruvianum var. dentatum chloroplasts. Mitochondrial DNA analysis revealed mixed mitochondrial populations deriving from both parents in some of the hybrids and rearranged mitochondrial DNA in others. The asymmetric hybrids express some morphological traits that are not found in either of the parental species. Fertile F1 plants were obtained after self-pollination of the asymmetric hybrids in four cases. The results obtained confirm the potential of asymmetric hybridization as a new source of genetic variation, and as a method for transferring of a part of genetic material from donor to recipient, and demonstrate that it is possible to produce fertile somatic hybrids by this technique.

Impact of the stringency of cell selection on plastid segregation in protoplast fusion-derived Nicotiana regenerates

Vegetative segregation of a mixed plastid population in protoplast fusion-derived cell lines can be directed by a selection favouring the multiplication of one of the parental plastid types. This report defines some of the critical conditions leading to a homogeneous plastid population in cybrid plants generated by protoplast fusion between Nicotiana plumbaginifolia and an albino and streptomycin-resistant N. tabacum plastid mutant. Light (1,500 lx) conferred a strong selective advantage to chloroplasts versus albino plastids, while the lack of this effect in dim light (300 lx) indicated that a sufficient light intensity is essential to the phenomenon. Selection on streptomycin-containing medium in the dark, however, led to the preferential multiplication of resistant plastids. Streptomycin selection of resistant chloroplasts in the light, consequently, results in a plastid selection of doubled stringency. In another experiment a definite, but leaky, selection for chloroplast recombination (selection for greening on streptomycin-containing medium in dim light) was used to reveal various recombination products. Protoplast fusion in fact resulted in cybrid plants showing only simple chimeric segregation of unchanged parental plastids. These results demonstrate the essential requirement for stringent plastid selection, as defined by cell culture conditions, to precede the formation of shoots expected to possess the desired plastid genetic composition.

Intergeneric somatic hybridization in Gramineae: somatic hybrid plants between tall fescue (Festuca arundinacea Schreb.) and Italian ryegrass (Lolium multiflorum Lam.)

Tall fescue (Festuca arundinacea Schreb.) protoplasts, inactivated by iodoacetamide, and non-morphogenic Italian ryegrass (Lolium multiflorum Lam.) protoplasts, both derived from suspension cultures, were electrofused and putative somatic hybrid plants were recovered. Two different genotypic fusion combinations were carried out and several green plants were regenerated in one of them. With respect to plant habitus, leaf and inflorescence morphology, the regenerants had phenotypes intermediate between those of the parents. Southern hybridization analysis using a rice ribosomal DNA probe revealed that the regenerants contained both tall fescue- and Italian ryegrass-specific-DNA fragments. A cloned Italian ryegrass-specific interspersed DNA probe hybridized to total genomic DNA from Italian ryegrass and from the green regenerated somatic hybrid plants but not to tall fescue. Chromosome counts and zymograms of leaf esterases suggested nuclear genome instability of the somatic hybrid plants analyzed. Four mitochondrial probes and one chloroplast DNA probe were used in Southern hybridization experiments to analyze the organellar composition of the somatic hybrids obtained. The somatic hybrid plants analyzed showed tall fescue, additive or novel mtDNA patterns when hybridized with different mitochondrial gene-specific probes, while corresponding analysis using a chloroplast gene-specific probe revealed in all cases the tall fescue hybridization profile. Independently regenerated F. arundinacea (+) L. multiflorum somatic hybrid plants were successfully transferred to soil and grown to maturity, representing the first flowering intergeneric somatic hybrids recovered in Gramineae.

Regeneration of intergeneric somatic hybrid plants between Lycopersicon esculentum and Solanum muricatum

Mesophyll protoplasts of tomato (Lycopersicon esculentum) and pepino (Solanum muricatum) were fused by using an electrofusion method and cultured in modified MS medium supplemented with naphthaleneacetic acid and kinetin, in which only pepino and somatic hybrid protoplasts could divide. Somatic hybrid plants showing intermediate characteristics in morphology were regenerated from the calli exhibiting vigorous growth in contrast with those of pepino. The hybrid nature of these plants was confirmed by cytological observation and biochemical analyses of phosphoglucomutase isozymes and the fraction-1-protein. The regenerated somatic hybrids grew to flowering stage and set fruits.

Tomato cybrids with mitochondrial DNA from Lycopersicon pennelli

Cybrids have been regenerated following protoplast fusion of iodoacetamide-treated leaf mesophyll cells of Lycopersion esculentum cv UC82 and gamma-irradiated cell suspensions of L. pennellii, LA716. The cybrids were recovered in the regenerant population at a frequency of 19%, no selection pressure was applied for the persistence of the donor cytoplasm. The nuclear genotype of ten cybrids was characterized extensively using isozyme markers, cDNA-based restriction fragment length polymorphisms (RFLPs), and the morphology of the plants. No nuclear genetic information from L. pennellii was detected in the cybrids. The organellar genotype of the cybrids was determined using cloned probes and species-specific RFLPs. All the cybrids had inherited the tomato chloroplast genome and had varying amounts of L. pennellii mitochondrial DNA. The cybrids all had a diploid chromosome number of 24, produced pollen, and set seed.

Plant regeneration from stem cortex protoplasts of a tomato hybrid

Longitudinal sections containing cortical cells taken from stem internodes of a hybrid betweenLycopersicon esculentum andSolanum lycopersicoides were used as tissue sources for enzymatic protoplast isolation. Greenhouse and growth room-grown plants 4-8 weeks after rooting could be used as sources of donor tissue. Protoplasts from these tissues divided within 2-4 days of culture and numerous microcalli formed within 30 days. The shoot regeneration frequency of protoplast-derived calli was in the order of 60%. More than 100 regenerated plants which appear phenotypically normal have been established in soil.

Asymmetric somatic hybrids of Brassica: partial transfer of B. campestris genome into B. oleracea by cell fusion

To examine the possibility of producing asymmetric somatic hybrids of Brassica having a complete genome of one species and a part of the other, we fused inactivated B. oleracea protoplasts with X-irradiated B. campestris protoplasts. The plants obtained were studied with regard to their morphology, isozymes and chromosomes. The morphology of the hybrids was similar to B. oleracea in 9 out of 22 hybrids studied and the rest showed the intermediate phenotype of the parents. Analysis of three isozymes, leucine aminopeptidase, acid phosphatase and esterase indicated that ten hybrids lost B. campestris-specific bands in one or more of the three isozymes examined. The chromosome analysis showed that 90% of the hybrids were aneuploids. In addition, abnormal chromosomes were often found in root tip cells. These results suggested that the hybrids obtained were asymmetric in nature and resulted from elimination of B. campestris chromosomes by X-ray irradiation.

Intergeneric somatic hybrid production through protoplast fusion between Brassica juncea and Diplotaxis muralis

The need to transfer genetic traits from Diplotaxis muralis (2n=42) to Brassica juncea (2n=36), a major oil seed crop of the tropical world, was realised. Since the two plant types are sexually incompatible, attempts were made to evolve parasexual hybrids as the result of protoplast fusion. Protoplasts of hypocotyl-derived calli of two cultivars of B. juncea were fused with normal and γ-irradiated mesophyll protoplasts of Diplotaxis muralis. Regeneration of 110 plants from the fused products was successfully achieved. Upon analysis of some of them, we realised that true somatic hybrids and partial somatic hybrids had been generated. Thus the primary goal of evolving intergeneric hybridisation products between these two plant types was fulfilled.