“Bottom-up” approach for implementing nano/microstructure using biological and chemical interactions

Response of preosteoblasts on micromachined Ti-6Al-4V surface to microstructure dimension

The cell incubation depends on the cultured surface, but various machining methods produce different surface topographies, but it has not been clear how it is related to the topographic feature until now. Hence, the machined Ti-6Al-4V surface is characterized for preosteoblasts incubation via different mechanical fabrication. The relationship between surface topography created by various machining methods and cell incubation behaviour was explored. The objective is to control the surface preosteoblasts growth in machining of biological titanium alloy. According to the cell growth kinetic, the cell incubation behaviour was first proposed and modelled in relation to microstructural dimension and culture duration. Then, the topological cultured microstructure surface was fabricated via mechanical fabrication. Finally, the cell initial adhesion and incubation behaviour on microstructured surface was investigated. It is shown that the surface undulation on machined microstructure is conducive to controlling the direction and distribution of cell incubation from cell growth kinetic model. The cell culture can be controlled on the peak with a small undulation, while it is concentred on the sidewall with a high aspect ratio. Increasing the aspect ratio extends cell growth, while low aspect ratio promotes initial cell adhesion and growth rate. Within the optimal cultured duration, the microstructured surface is more favourable for cell survival, and the cell growth keep positive beyond critical aspect ratio. As a result, the cell adhesion ability is topologically controlled to 5.4 times higher and the growth rate can be improved by 101.7% on milled microgrooved surface. It may be applied to the rapid production of biomedical Ti-6Al-4V implant.

Fabrication of Electrochemical-Based Bioelectronic Device and Biosensor Composed of Biomaterial-Nanomaterial Hybrid

The field of bioelectronics has paved the way for the development of biochips, biomedical devices, biosensors and biocomputation devices. Various biosensors and biomedical devices have been developed to commercialize laboratory products and transform them into industry products in the clinical, pharmaceutical, environmental fields. Recently, the electrochemical bioelectronic devices that mimicked the functionality of living organisms in nature were applied to the use of bioelectronics device and biosensors. In particular, the electrochemical-based bioelectronic devices and biosensors composed of biomolecule-nanoparticle hybrids have been proposed to generate new functionality as alternatives to silicon-based electronic computation devices, such as information storage, process, computations and detection. In this chapter, we described the recent progress of bioelectronic devices and biosensors based on biomaterial-nanomaterial hybrid.

Controlled hierarchical assembly of gold nanoparticles in macroscopic films: from densely packed monolayers to networks of micropores and nanobundles

The present study demonstrates the ability of excess, weakly amphiphilic n-alkanethiols (n = 4, 12, 18) and solvent composition to tune through a wide range of large-scale, macroscopic architectures formed by alkanethiol-capped Au nanoparticles (NPs). Both the alkanethiols and NPs are significantly hydrophobic species and compete for surface area at an air-water interface. When solutions of the two species are spread on a large (50 cm²) water surface in a Teflon well, a thin film forms and exhibits co-existing macroscopic regions with various distinct NP self-assembled architectures, namely a close packed monolayer, a network phase characterized by micron-sized pores (micropores) surrounded by quasi-linear bundles of nanoparticles, and finally aggregates. We hypothesize that the co-existence of various NP architectures results from fast, non-uniform evaporation across the large water surface. When solutions are instead deposited on a smaller (5 cm²) water surface contained within a Teflon ring to control the water surface curvature and the evaporation rate is slowed, we show for the first time that NPs form macroscopically uniform self-assemblies whose architectures can be tuned from monolayers → monolayers with micropores → extended micropore/NP bundle networks by varying excess alkanethiol concentration and solvent composition. We propose that competition between NPs and excess alkanethiols for water surface area, and alkanethiol self-assembly as well as solvent dewetting play important roles in the formation of the network phase, and discuss a potential mechanism for its formation.

High sensitive and selective electrochemical biosensor: Label-free detection of human norovirus using affinity peptide as molecular binder

Norovirus is known as the major cause of highly infection for gastrointestinal tracts. In this study, robust and highly sensitive biosensors for detecting human norovirus by employing a recognition affinity peptide-based electrochemical platform were described. A series of amino acid-substituted and cysteine-incorporated recognition peptides isolated from evolutionary phage display technique was chemically synthesized and immobilized to a gold sensor layer, the detection performance of the gold-immobilized synthetic peptide-based sensor system was assessed using QCM, CV and EIS. Using EIS, the limit of detection with Noro-1 as a molecular binder was found to be 99.8nM for recombinant noroviral capsid proteins (rP2) and 7.8copies/mL for human norovirus, thereby demonstrating a high degree of sensitivity for their corresponding targets. These results suggest that a biosensor which consists of affinity peptides as a molecular binder and miniaturized microdevices as diagnostic tool could be served as a new type of biosensing platform for point-of-care testing.

Recent developments in nanowires for bio-applications from molecular to cellular levels

This review highlights the most promising applications of nanowires for bioanalytical chemistry and medical diagnostics. The materials discussed here are metal oxide and Si semiconductors, which are integrated with various microfluidic systems. Nanowire structures offer desirable advantages such as a very small diameter size with a high aspect ratio and a high surface-to-volume ratio without grain boundaries; consequently, nanowires are promising tools to study biological systems. This review starts with the integration of nanowire structures into microfluidic systems, followed by the discussion of the advantages of nanowire structures in the separation, manipulation and purification of biomolecules (DNA, RNA and proteins). Next, some representative nanowire devices are introduced for biosensors from molecular to cellular levels based on electrical and optical approaches. Finally, we conclude the review by highlighting some bio-applications for nanowires and presenting the next challenges that must be overcome to improve the capabilities of nanowire structures for biological and medical systems.

Polymer nanoparticulate drug delivery and combination cancer therapy

This review describes the scientific background, current achievement and future perspective of combination therapy using polymer nanoparticle drug carriers in cancer treatment. Nanotechnology-based drug delivery is expected to dramatically change combination cancer therapy by controlling accumulation and distribution patterns of multiple drugs selectively in disease sites. Rationally designed polymer materials can produce functional nanoparticulate drug carriers that can be used in various biomedical applications. In comparison with conventional drug combination approaches, using polymer nanoparticle drug carriers appears to suppress tumor growth more efficiently, potentially overcoming multidrug resistance in many cancers. It also provides versatile combination options for a variety of therapeutic agents, molecular targeting agents and nucleotide drugs.

Microfluidic multifunctional probe array dielectrophoretic force spectroscopy with wide loading rates

The simultaneous investigation of a large number of events with different types of intermolecular interactions, from nonequilibrium high-force pulling assays to quasi-equilibrium unbinding events in the same environment, can be very important for fully understanding intermolecular bond-rupture mechanisms. Here, we describe a novel dielectrophoretic force spectroscopy technique that utilizes microsized beads as multifunctional probes for parallel measurement of intermolecular forces with an extremely wide range of force rate (10(-4) to 10(4) pN/s) inside a microfluidic device. In our experiments, various forces, which broadly form the basis of all molecular interactions, were measured across a range of force loading rates by multifunctional probes of various diameters with a throughput of over 600 events per mm(2), simultaneously and in the same environment. Furthermore, the individual bond-rupture forces, the parameters for the characterization of entire energy landscapes, and the effective stiffness of the force spectroscopy were determined on the basis of the measured results. This method of determining intermolecular forces could be very useful for the precise and simultaneous examination of various molecular interactions, as it can be easily and cost-effectively implemented within a microfluidic device for a range of applications including immunoassays, molecular mechanics, chemical and biological screening, and mechanobiology.

Three-dimensional surface patterning by DNA-modifying enzymes

Self-assembled patterned multilayers may be fabricated using DNA monolayers and the orchestrated reactions of DNA-modifying enzymes. To demonstrate this approach, DNA monolayers were formed on silicon and cleaved quantitatively with a restriction enzyme. Subsequently, fluorescently labeled nucleotides were covalently incorporated to the cleaved DNA. Nucleotide addition was shown to be highly selective according to the sequence at the cleavage site, and no nonspecific adsorption to the surface was observed. The dual action of the DNA-modifying enzymes was quantitative and could be utilized in the fabrication of multilayered structures. Other DNA-modifying enzymes can be exploited in this manner to enrich the repertoire of self-assembly supramolecular structure fabrication.

Water-soluble nanorods self-assembled via pristine C60 and porphyrin moieties

A novel water-soluble nanorod is discussed, which is prepared via the self-assembly of pristine C60 and a double-sided porphyrin projecting four beta-cyclodextrins from each face.