Novel Metal Artifact Reduction Techniques with Use of Slice-Encoding Metal Artifact Correction and View-Angle Tilting MR Imaging for Improved Visualization of Brain Tissue near Intracranial Aneurysm Clips

Magnetic resonance imaging in dental implant surgery: a systematic review

PURPOSE

To comprehensively assess the existing literature regarding the rapidly evolving in vivo application of magnetic resonance imaging (MRI) for potential applications, benefits, and challenges in dental implant surgery.

METHODS

Electronic and manual searches were conducted in PubMed MEDLINE, EMBASE, Biosis, and Cochrane databases by two reviewers following the PICOS search strategy. This involved using medical subject headings (MeSH) terms, keywords, and their combinations.

RESULTS

Sixteen studies were included in this systematic review. Of the 16, nine studies focused on preoperative planning and follow-up phases, four evaluated image-guided implant surgery, while three examined artifact reduction techniques. The current literature highlights several MRI protocols that have recently investigated and evaluated the in vivo feasibility and accuracy, focusing on its potential to provide surgically relevant quantitative and qualitative parameters in the assessment of osseointegration, peri-implant soft tissues, surrounding anatomical structures, reduction of artifacts caused by dental implants, and geometric accuracy relevant to implant placement. Black Bone and MSVAT-SPACE MRI, acquired within a short time, demonstrate improved hard and soft tissue resolution and offer high sensitivity in detecting pathological changes, making them a valuable alternative in targeted cases where CBCT is insufficient. Given the data heterogeneity, a meta-analysis was not possible.

CONCLUSIONS

The results of this systematic review highlight the potential of dental MRI, within its indications and limitations, to provide perioperative surgically relevant parameters for accurate placement of dental implants.

Diagnostic imaging of salivary gland cancers: REFCOR recommendations by the formal consensus method

OBJECTIVE

To define the indications for each imaging modality in the screening, characterization, extension and follow-up of salivary gland tumors.

MATERIAL AND METHODS

The French Network of Rare Head and Neck Tumors (REFCOR) formed a steering group who drafted a narrative review of the literature published on Medline and proposed recommendations. The level of adherence to the recommendations was then assessed by a rating group, according to the formal consensus method.

RESULTS

If a swelling of a salivary gland is palpable for 3 weeks, an ultrasound scan is recommended to confirm a tumoral lesion and rule out differential diagnoses. For a salivary gland tumor, MRI is recommended with diffusion-weighted and dynamic contrast-enhanced techniques. In the case of histologically proven malignancy or a highly suspicious lesion, a CT scan of the neck and chest is recommended to assess the tumor, lymph nodes and metastases. FDG-PET is not currently recommended in routine clinical practice for initial diagnosis, assessment of extension, evaluation of response to treatment, staging of recurrence, or follow-up of salivary gland tumors.

CONCLUSION

Assessing salivary tumors is based on MRI. Extension assessment is based on neck and chest CT.

Development and Evaluation of an MRI Artifact-Free Aneurysm Clip

BACKGROUND AND OBJECTIVES

The digital subtraction angiography is still the gold standard in the follow-up after aneurysm surgery, although it remains a repeating invasive technique with accumulating X-ray exposure. An alternative magnetic resonance angiography has the disadvantage of metal-related artifacts. A metal-free aneurysm clip could overcome this problem. Recent advances in manufacturing technologies of fiber-reinforced plastics might allow developing a prototype of a metal-free clip.

METHODS

The prototype was formed out of carbon fiber-reinforced polyetheretherketone (CF-PEEK) in accordance with the standard clip design. In vivo and in vitro studies were performed to analyze the central nervous system biocompatibility. The prototype was tested in a phantom in a 3 T MRI scanner and microtomography scanner. For in vivo assessment, the left renal artery of rats was either ligated with a suture, clipped with a regular titanium clip or with the CF-PEEK prototype clip. The animals underwent standard MRI sequences and magnetic resonance angiography and assessment by a blinded neuroradiologist.

RESULTS

Phantom studies showed no signs of artifacts. The prototype showed a reliable clamping and reopening after clip application, although the clamping force was reduced. In vivo studies showed a successful occlusion of the renal artery in all cases in the magnetic resonance angiography. Clip artifacts were statistically significant reduced in the prototype group (P < .01). CF-PEEK showed no signs of impaired biocompatibility compared with the titanium samples in vitro and in vivo.

CONCLUSION

Former attempts of metal-free aneurysm clips did not meet the criteria of the standard clip design. In this study, the practicability of this new CF-PEEK artifact-free aneurysm clip has been proven. The further fabrication developments should overcome the problem of a reduced clamping force in the future. After clinical approval, it will improve the magnetic resonance image quality and might help to reduce the amount of digital subtraction angiography in the follow-up.

Image Quality and Artifact Reduction of a Cochlear Implant With Rotatable Magnets

OBJECTIVE

To determine if metal reduction magnetic resonance imaging sequences and changes in implant placement minimize artifact from cochlear implants and improve visualization of intracranial structures.

STUDY DESIGN

Cadaveric study.

SETTING

Tertiary referral center.

PATIENTS

Five cadaveric heads.

INTERVENTIONS

Specimens were implanted with Advanced Bionics HiRes Ultra3D devices at nasion-external auditory canal angles of 90, 120, and 160 degrees, and distances from the external auditory canal of 9 or 12 cm. Standard brain/internal auditory canal (IAC) sequences with metal artifact reducing technique were acquired in a 1.5T scanner.

MAIN OUTCOME MEASURES

The primary outcome was visibility of 14 intracranial structures graded on a 4-point scale (1, structures <50% visible; 2, >50% visible with some areas nonvisible from artifact; 3, artifact present but adequate for diagnosis; and 4, high quality). Scores were determined by experienced head and neck radiologists and compared with one-way analysis of variance.

RESULTS

Imaging sequences included axial 5-mm whole-brain turbo spin echo (TSE) T2 with right to left and anterior to posterior encoding, fluid-attenuation inversion recovery high bandwidth, axial 5-mm whole-brain slice-encoding metal artifact correction (SEMAC), axial IAC constructive interference in steady state, and axial 3-mm T1 IAC with and without fat saturation. T1 IACs in axial and coronal planes were best for ipsilateral structures overall (mean [standard deviation {SD}], 3.8 [0.6] and 3.8 [0.5]). SEMAC (mean [SD], 3.5 [0.8]) was superior to TSE with anterior to posterior encoding (mean [SD], 3.5 [0.9) for ipsilateral cortex, cerebellopontine angle, and brainstem/cerebellum, and equivalent for the inner ear. Constructive interference in steady state and T1 with fat saturation were poor for all ipsilateral structures (mean, 2.8 [ p < 0.01]; mean, 3.1 [ p < 0.01]). The 120 degrees/12 cm position was overall best, although the 120 degrees/9 cm position still afforded visualization of ipsilateral structures; other angles and distances conferred slight advantages for specific structures of interest.

CONCLUSIONS

SEMAC and T2 TSE with anterior to posterior encoding sequences provide artifact suppression while retaining excellent image quality. Different placement angles did not confer improvement in visualization, although placement distances provided slight advantages for some structures.

Reliability and accuracy of intraoral radiography, cone beam CT, and dental MRI for evaluation of peri-implant bone lesions at zirconia implants - an ex vivo feasibility study

OBJECTIVES

To determine the reliability and accuracy of intraoral radiography (IR), cone-beam-computed tomography (CBCT), and dental magnetic resonance imaging (dMRI) in measuring peri‑implant bone defects around single zirconia implants.

METHODS

Twenty-four zirconia implants were inserted in bovine ribs with various peri‑implant defect sizes and morphologies. True defect extent was measured without implant in CBCT. Defects were measured twice in IR, CBCT, and dMRI with the inserted implant by three experienced readers. Reliability was assessed by ICC, accuracy by the Friedman test, and post-hoc-Tukey's test.

RESULTS

A comparable good to excellent intra- and inter-reader reliability was observed for all modalities (intra-/inter-rater-CC range for IR; CBCT; dMRI: 0.81-0.91/0.79;0.87-0.97/0.96;0.87-0.95/0.94). Accuracy was generally high, with mean errors below 1 mm in all directions. However, measuring defect depth in the mesiodistal direction was significantly more accurate in dMRI (0.65 ± 0.38 mm) compared to IR (2.71 ± 1.91 mm), and CBCT (1.98 ± 1.97 mm), p-values ≤ 0.0001 respectively ≤ 0.01.

CONCLUSIONS

Osseous defects around zirconia implants can be reliably measured in IR/CBCT/dMRI in the mesiodistal directions. In addition, CBCT and dMRI allow assessment of the buccolingual directions. dMRI provides a comparable accuracy in all directions, except for the mesiodistal defect depth, where it outperforms IR and CBCT.

Single-Energy Metal Artifact Reduction (SEMAR) in Ultra-High-Resolution CT Angiography of Patients with Intracranial Implants

PURPOSE

To evaluate the effects of single-energy metal artifact reduction (SEMAR) on image quality of ultra-high-resolution CT-angiography (UHR-CTA) with intracranial implants after aneurysm treatment.

METHODS

Image quality of standard and SEMAR-reconstructed UHR-CT-angiography images of 54 patients who underwent coiling or clipping was retrospectively evaluated. Image noise (i.e., index for metal-artifact strength) was analyzed in close proximity to and more distally from the metal implant. Frequencies and intensities of metal artifacts were additionally measured and intensity-differences between both reconstructions were compared in different frequencies and distances. Qualitative analysis was performed by two radiologists using a four-point Likert-scale. All measured results from both quantitative and qualitative analysis were then compared between coils and clips.

RESULTS

Metal artifact index (MAI) and the intensity of coil-artifacts were significantly lower in SEMAR than in standard CTA in close vicinity to and more distally from the coil-package (p < 0.001, each). MAI and the intensity of clip-artifacts were significantly lower in close vicinity (p = 0.036; p < 0.001, respectively) and more distally from the clip (p = 0.007; p < 0.001, respectively). In patients with coils, SEMAR was significantly superior in all qualitative categories to standard images (p < 0.001), whereas in patients with clips, only artifacts were significantly less (p < 0.05) for SEMAR.

CONCLUSION

SEMAR significantly reduces metal artifacts in UHR-CT-angiography images with intracranial implants and improves image quality and diagnostic confidence. SEMAR effects were strongest in patients with coils, whereas the effects were minor in patients with titanium-clips due to the absent of or minimal artifacts.

[Microsurgical and endovascular treatment of residual and recurrent cerebral aneurysms]

Cerebral aneurysms are characterized by high risk of adverse outcome due to severe intracranial hemorrhages and their consequences. Aneurysm remnants after incomplete exclusion can cause hemorrhage. Filling of these fragments immediately after surgery is usually defined as residual aneurysms. Recurrent aneurysms develop in the area of excluded aneurysm in long-term period after surgery. The authors analyze foreign and national literature data on the diagnosis and management of residual and recurrent aneurysms. Risk factors, the most common classifications, diagnostic methods and surgical treatment are presented.

Frequency and risk factors for postoperative aneurysm residual after microsurgical clipping

OBJECTIVE

Aneurysm residuals after clipping are a well-known problem, but the course of aneurysm remnants in follow-up is not well studied. No standards or follow-up guidelines exist for treatment of aneurysm remnants. The aim of this study was to evaluate the risk factors for postoperative aneurysm remnants and their changes during follow-up.

METHODS

We performed a retrospective analysis of 666 aneurysms treated via clipping in our hospital from 2006 to 2016. Postoperative and follow-up angiographic data were analyzed for aneurysm remnants and regrowth. Clinical parameters and aneurysm-specific characteristics were correlated with radiological results.

RESULTS

The frequency of aneurysm residuals was 12% (78/666). Aneurysms located in the middle cerebral artery (p = 0.02) showed a significantly lower risk for incomplete aneurysm occlusion. Larger aneurysms with a diameter of 11-25 mm (p = 0.005) showed a significantly higher risk for incomplete aneurysm occlusion. Five patients underwent re-clipping during the same hospital stay. Remnants were stratified based on morphological characteristics into "dog ears" (n = 60) and "broad based" (n = 13). The majority of the "dog ears" stayed stable, decreased in size, or vanished during follow-up. Broad-based remnants showed a higher risk of regrowth.

CONCLUSIONS

A middle cerebral artery location seems to lower the risk for the incomplete clip occlusion of an aneurysm. Greater aneurysm size (11-25 mm) is associated with a postoperative aneurysm remnant. The majority of "dog-ear" remnants appear to remain stable during follow-up. In these cases, unnecessarily frequent angiographic checks could be avoided. By contrast, broad-based residuals show a higher risk of regrowth that requires close imaging controls if retreatment cannot be performed immediately.

[Completeness of brain aneurysm exclusion according to CT angiography]

OBJECTIVE

To develop a classification of the completeness of brain aneurysm exclusion according to CT angiography for determining further diagnostic and curative strategy.

MATERIAL AND METHODS

The study included 138 patients who had 164 brain aneurysms. Clipping was carried out at the Burdenko Neurosurgery Center in 2013-2017. Titanium clips were used in 111 cases, cobalt clips - in 53 patients.

RESULTS

Completeness of brain aneurysm exclusion was assessed in 149 cases using CT angiography. In 15 cases, artifacts from cobalt clips impaired assessment. Total exclusion was achieved in 136 (91.3%) cases, subtotal (a remainder of residual neck) - in 10 (6.7%) cases, complete exclusion of the body and bottom (patent neck) - 2 (1.3%) patients, partial exclusion (partially patent bottom) - 1 patient (0.7%). In this series, a clip prevented complete contrast enhancement of brain aneurysm bottom in all cases.

CONCLUSION

CTA is a reliable method for assessing the quality of exclusion of brain aneurysm in patients with implanted titanium clips. In case of cobalt clips, stratification depending on severity of CT artifacts should be performed for data interpretation. In some cases, artifacts impair visualization of the vessels adjacent to the clips. In these patients, direct cerebral angiography or dual-energy computed tomography scanners with metal artifact suppression programs should be recommended.

Follow-up is recommended for patients with remnants of residual cervix. Redo surgery is indicated for completely patent neck, as well as partial or complete contrast enhancement of aneurysm bottom.

Feasibility of Smart Metal Artifact Reduction Algorithm on Computed Tomography Angiography for Clipping of Recurrent Aneurysms After Coil Embolization

BACKGROUND

The number of patients with a history of clipping of recurrent aneurysms after coil embolization has increased. The aim of this article was to report the feasibility of CT angiography using a commercial metal artifact reduction algorithm (Smart Metal Artifact Reduction [MAR]) for patients who underwent clipping of recurrent aneurysms after coil embolization.

METHODS

Six cases of clipping of recurrent aneurysms after coil embolization were examined with CT angiography using MAR between 2015 and 2018 at a single institution. Conventional CT angiography and three-dimensional digital subtraction angiography data were compared, and depiction of the status of treated aneurysms using MAR was estimated.

RESULTS

Conventional CT angiography was unable to depict the status of treated aneurysms in the patients with a history of clipping of recurrent aneurysms after coil embolization because of metal artifacts. With MAR, metal artifacts were greatly reduced, and the status of treated aneurysms was able to be depicted, although depiction was inferior to three-dimensional digital subtraction angiography.

CONCLUSIONS

For patients with a history of clipping of recurrent aneurysms after coil embolization, CT angiography using MAR is feasible, although further development of imaging techniques is needed.

Single-energy metal artifact reduction technique for reducing metallic coil artifacts on post-interventional cerebral CT and CT angiography

PURPOSE

To evaluate the effects of the single-energy metal artifact reduction (SEMAR) algorithm on image quality of cerebral CT and CT angiography (CTA) for patients who underwent intracranial aneurysm coiling.

METHODS

Twenty patients underwent cerebral CT and CTA using a 320-detector row CT after intracranial aneurysm coiling. Images with and without application of the SEMAR algorithm (SEMAR CT and standard CT images, respectively) were reconstructed for each patient. The images were qualitatively assessed by two independent radiologists in a blinded manner for the depiction of anatomical structures around the coil, delineation of the arteries around the coil, and the depiction of the status of coiled aneurysms. Artifact strength was quantitatively assessed by measuring the standard deviation of attenuation values around the coil.

RESULTS

The strength of artifacts measured in SEMAR CT images was significantly lower than that in standard CT images (25.7 ± 10.2 H.U. vs. 80.4 ± 67.2 H.U., p < 0.01, Student's paired t test). SEMAR CT images were significantly improved compared with standard CT images in the depiction of anatomical structures around the coil (p < 0.01, the sign test), delineation of the arteries around the coil (p < 0.01), and the depiction of the status of coiled aneurysms (p < 0.01).

CONCLUSION

The SEMAR algorithm significantly reduces metal artifacts from intracranial aneurysm coiling and improves visualization of anatomical structures and arteries around the coil, and depiction of the status of coiled aneurysms on post-interventional cerebral CT.

[Distortion Reduction Effect of View Angle Tilting (VAT) in Large Field of View Magnetic Resonance Imaging]

With shortening of the gantry of magnetic resonance imaging (MRI) systems, large field-of-view (FOV) imaging has become difficult because static magnetic field nonuniformity and gradient magnetic field nonlinearity exacerbate geometric distortion of MR images. However, results of earlier studies have demonstrated that view angle tilting (VAT) can reduce severe image distortion attributable to local susceptibility effects of metals. Although VAT is usually applied to local magnetic field nonuniformity, in principle VAT is expected to correct distortion also for peripheral images in large-FOV MRI. Results from this phantom experiment using VAT with large-FOV verified the effectiveness of distortion correction. The experiment using VAT showed reduction of maximum distortion from 23.6 to -1.9 mm. Furthermore, results of a volunteer study confirmed the distortion correction capability of VAT: it reduced distortion and improved visibility of the anatomical structure. In conclusion, experimentally obtained results underscore VAT effectiveness for improving distortion in large-FOV MRI.

Reduction of Metallic Artifacts of the Post-treatment Intracranial Aneurysms: Effects of Single Energy Metal Artifact Reduction Algorithm

PURPOSE

This study evaluated the quality of computed tomography (CT) and CT angiography images generated using the single-energy metal artifact reduction (SEMAR) algorithm during perfusion examination in patients who had undergone reconstruction with neurosurgical clipping or endovascular coiling for treatment of aneurysms.

METHODS

A total of 55 patients with implanted intracranial clips or coils (24 men and 31 women; mean age 60.15 ± 15.86 years) underwent perfusion studies evaluated by CT and CT angiography with a 320-row CT scanner. Images were reconstructed with either the SEMAR algorithm combined with iterative reconstruction (SEMAR group), or by iterative reconstruction only (non-SEMAR group control). The SEMAR and control images were compared for artifacts (index and maximum diameter), image quality, cerebral perfusion parameters, noise (images with the worst artifacts), and contrast-to-noise ratio. The metallic artifacts were visually evaluated by two radiologists using a four-point scale in a double-blinded manner.

RESULTS

The noise, artifact diameter, and artifact index of the SEMAR images were significantly lower than that of the control images, and the subjective image quality score and contrast-to-noise ratio were significantly higher (P < 0.01, all). The cerebral perfusion parameters of the SEMAR and control images were comparable (i. e. blood flow, blood volume, and mean transit time).

CONCLUSION

For imaging intracranial metallic implants, the SEMAR algorithm produced images with significantly fewer artifacts than the iterative reconstruction alone, with no statistical changes in perfusion parameters. Thus, SEMAR reconstruction can be instrumental in improving CT image quality and may ultimately improve the detection of postoperative complications and patient prognosis.

Advances in MRI around metal

The prevalence of orthopedic metal implants is continuously rising in the aging society. Particularly the number of joint replacements is increasing. Although satisfying long-term results are encountered, patients may suffer from complaints or complications during follow-up, and often undergo magnetic resonance imaging (MRI). Yet metal implants cause severe artifacts on MRI, resulting in signal-loss, signal-pileup, geometric distortion, and failure of fat suppression. In order to allow for adequate treatment decisions, metal artifact reduction sequences (MARS) are essential for proper radiological evaluation of postoperative findings in these patients. During recent years, developments of musculoskeletal imaging have addressed this particular technical challenge of postoperative MRI around metal. Besides implant material composition, configuration and location, selection of appropriate MRI hardware, sequences, and parameters influence artifact genesis and reduction. Application of dedicated metal artifact reduction techniques including high bandwidth optimization, view angle tilting (VAT), and the multispectral imaging techniques multiacquisition variable-resonance image combination (MAVRIC) and slice-encoding for metal artifact correction (SEMAC) may significantly reduce metal-induced artifacts, although at the expense of signal-to-noise ratio and/or acquisition time. Adding advanced image acquisition techniques such as parallel imaging, partial Fourier transformation, and advanced reconstruction techniques such as compressed sensing further improves MARS imaging in a clinically feasible scan time. This review focuses on current clinically applicable MARS techniques. Understanding of the main principles and techniques including their limitations allows a considerate application of these techniques in clinical practice. Essential orthopedic metal implants and postoperative MR findings around metal are presented and highlighted with clinical examples.

LEVEL OF EVIDENCE

4 Technical Efficacy: Stage 3 J. Magn. Reson. Imaging 2017;46:972-991.

SEMAC-VAT MR Imaging Unravels Peri-instrumentation Lesions in Patients With Attendant Symptoms After Spinal Surgery

The study aimed for evaluating the diagnostic value of a 2D Turbo Spin Echo (TSE) magnetic resonance (MR) imaging sequence implanted slice-encoding metal artifact correction (SEMAC) and view-angle tilting (VAT) in patients with spinal instrumentation.Sixty-seven consecutive patients with an average age of 59.7 ± 17.8 years old (range: 32-75 years) were enrolled in this study. Both sagittal, axial T1-weighted and T2-weighted MRI images were acquired with a standard TSE sequence and a high-bandwidth TSE sequence implemented the SEMAC and VAT techniques. Three continuous sections around the instrumentation in axial and sagittal images were selected for quantitative evaluation. The measurement included cumulative areas of signal void on axial images and the length of spinal canal obscuration on sagittal images. Three radiologists independently evaluated all images blindly. The inter-observer reliability was evaluated with inter-class coefficient. We defined patients with discomfortable symptoms caused by spinal instrumentation as spinal instrumentation adverse reaction.Visualizations of all periprosthetic anatomic structures were significantly better for SEMAC-VAT compared with standard imaging. For axial images, the area of signal void at the level of the instrumentation were statistically reduced with SEMAC-VAT TSE sequences than with standard TSE sequences for T2-weighted images (9.9 ± 2.6 cm vs 29.8 ± 14.7 cm, P < 0.001). For sagittal imaging, the length of spinal canal obscuration at the level of the instrumentation was reduced from 5.2 ± 2.0 cm to 1.2 ± 0.6 cm on T2-weighted images (P < 0.001), and from 4.8 ± 2.1 cm to 1.1 ± 0.5 cm on T1-weighted images with SEMAC-VAT sequences (P < 0.001). Interobserver agreement for visualization of anatomic structures and image quality was good for both SEMAC-VAT (k = 0.77 and 0.68, respectively) and standard (k = 0.74 and 0.80, respectively) imaging. The number of abnormal findings noted on SEMAC images (59 findings) was significantly higher than detected on standard images (40 findings). The incidence rate of spinal instrumentation adverse reaction was 38.81%.MR images with SEMAC-VAT can significantly reduce metal artifacts for spinal instrumentation and improve delineation of the instrumentation and periprosthetic region. Furthermore, SEMAC-VAT technique can improve diagnostic accuracy in patients with post-instrumentation spinal diseases.