Dental microwear patterns of extant and extinct Muridae (Rodentia, Mammalia): ecological implications

Complex dental wear analysis reveals dietary shift in Triassic placodonts (Sauropsida, Sauropterygia)

Placodonts were durophagous reptiles of the Triassic seas with robust skulls, jaws, and enlarged, flat, pebble-like teeth. During their evolution, they underwent gradual craniodental changes from the Early Anisian to the Rhaetian, such as a reduction in the number of teeth, an increase in the size of the posterior palatal teeth, an elongation of the premaxilla/rostrum, and a widening of the temporal region. These changes are presumably related to changes in dietary habits, which, we hypothesise, are due to changes in the type and quality of food they consumed. In the present study, the dental wear pattern of a total of nine European Middle to Late Triassic placodont species were investigated using 2D and 3D microwear analyses to demonstrate whether there could have been a dietary shift or grouping among the different species and, whether the possible changes could be correlated with environmental changes affecting their habitats. The 3D analysis shows overlap between species with high variance between values and there is no distinct separation. The 2D analysis has distinguished two main groups. The first is characterised by low number of wear features and high percentage of large pits. The other group have a high feature number, but low percentage of small pits. The 2D analysis showed a correlation between the wear data and the size of the enlarged posterior crushing teeth. Teeth with larger sizes showed less wear feature (with higher pit ratio) but larger individual features. In contrast, the dental wear facet of smaller crushing teeth shows more but smaller wear features (with higher scratch number). This observation may be related to the size of the food consumed, i.e., the wider the crown, the larger food it could crush, producing larger features. Comparison with marine mammals suggests that the dietary preference of Placochelys, Psephoderma and Paraplacodus was not exclusively hard, thick-shelled food. They may have had a more mixed diet, similar to that of modern sea otters. The diet of Henodus may have included plant food, similar to the modern herbivore marine mammals and lizards.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13358-024-00304-x.

New quantitative method for dental wear analysis of small mammals

The application of dental wear study to murids has always been ruled out because of their omnivorous diet, which does not leave significant wear on the dentition. Nevertheless, in our work we select Apodemus sylvaticus (wood mouse) as the object of study for several reasons: its seasonal diet, its ability to resist the gastric juices of predators, the fact that it has not undergone major morphological changes since its appearance 3 million years ago, and its widespread distribution throughout much of Europe and part of Africa. The importance of this work lies in the modifications we make to the dental wear methodology for its application to murids. These enable us to obtain quantitative data on the entire tooth surface. The sample chosen was a total of 75 lower first molars from two different archaeological sites: Teixoneres cave and Xaragalls cave. The chronology of the samples chosen ranges from Marine Isotope Stages 5-3. The data obtained reveal that the part of the tooth that shows most wear is the distal part (entoconid). Furthermore, the results provide us with relevant information on the types of accumulations of remains in the caves (short vs. long term), as well as on the seasonality of Neanderthal occupations during the Upper Pleistocene (MIS5-3) of the northeastern Iberian Peninsula.

Dental microwear texture analysis and diet in caviomorphs (Rodentia) from the Serra do Mar Atlantic forest (Brazil)

The Serra do Mar Atlantic forest (Brazil) shelters about 15 different species of caviomorph rodents and thus represents a unique opportunity to explore resource partitioning. We studied 12 species with distinct diets using dental microwear texture analysis (DMTA). Our results revealed differences (complexity, textural fill volume, and heterogeneity of complexity) among species with different dietary preferences, and among taxa sharing the same primary dietary components but not those with similar secondary dietary preferences (heterogeneity of complexity). We found three main dietary tendencies characterized by distinct physical properties: consumers of young leaves had low complexity; bamboo specialists, fruit and seed eaters, and omnivorous species, had intermediate values for complexity; grass, leaf, and aquatic vegetation consumers, had highly complex dental microwear texture. Dietary preferences and body mass explained a major part of the resource partitioning that presumably enables coexistence among these rodent species. DMTA was useful in assessing what foods contributed to resource partitioning in caviomorphs. Our database for extant caviomorph rodents is a prerequisite for interpretation of dental microwear texture of extinct caviomorph taxa, and thus for reconstructing their diets and better understanding the resource partitioning in paleocommunities and its role in the successful evolutionary history of this rodent group.

Complementary approaches to tooth wear analysis in Tritylodontidae (Synapsida, Mammaliamorpha) reveal a generalist diet

Stereoscopic microwear and 3D surface texture analyses on the cheek teeth of ten Upper Triassic to Lower Cretaceous tritylodontid (Mammaliamorpha) taxa of small/medium to large body size suggest that all were generalist feeders and none was a dietary specialist adapted to herbivory. There was no correspondence between body size and food choice. Stereomicroscopic microwear analysis revealed predominantly fine wear features with numerous small pits and less abundant fine scratches as principal components. Almost all analyzed facets bear some coarser microwear features, such as coarse scratches, large pits, puncture pits and gouges pointing to episodic feeding on harder food items or exogenous effects (contamination of food with soil grit and/or dust), or both. 3D surface texture analysis indicates predominantly fine features with large void volume, low peak densities, and various stages of roundness of the peaks. We interpret these features to indicate consumption of food items with low to moderate intrinsic abrasiveness and can exclude regular rooting, digging or caching behavior. Possible food items include plant vegetative parts, plant reproductive structures (seeds and seed-bearing organs), and invertebrates (i.e., insects). Although the tritylodontid tooth morphology and auto-occlusion suggest plants as the primary food resource, our results imply a wider dietary range including animal matter.

Sciuromorphy outside rodents reveals an ecomorphological convergence between squirrels and extinct South American ungulates

Notoungulates were a diverse group of South American ungulates that included the rodent-like typotherians. However, they are typically compared with other ungulates and interpreted as grazers. Here we present the first detailed reconstruction of the masticatory muscles of the pachyrukhine typotherians Paedotherium and Tremacyllus. An outstanding feature is the presence of a true sciuromorph condition, defined by an anterior portion of the deep masseter muscle originating from a wide zygomatic plate that reaches the rostrum, a trait traceable since the Oligocene pachyrukhines. Consequently, pachyrukhines are the first case of sciuromorph non-rodent mammals. This morphology would have allowed them to explore ecological niches unavailable for the exclusively hystricomorph coexisting rodents. This innovative acquisition seems to be synchronous in Pachyrukhinae and sciuromorph rodents and related to hard-food consumption. We postulate the expansion of nut and cone trees during the major environmental changes at Eocene-Oligocene transition as a potential trigger for this convergence.

Surface Replication, Fidelity and Data Loss in Traditional Dental Microwear and Dental Microwear Texture Analysis

Dental microwear studies often analyze casts rather than original surfaces, although the information loss associated with reproduction is rarely considered. To investigate the sensitivity of high magnification (150x) microwear analysis to common surface replication materials and methods, we compared areal surface texture parameters (ISO 25178-2) and traditional microwear variables (pits and scratches) generated from teeth and casts of rat molars exposed to experimental diets involving hard and soft foods in which abrasive materials had been added. Although the data from the original and replicated surfaces were correlated, many significant differences were found between the resulting data of the casts and original teeth. Both areal surface texture parameters and traditional microwear variables showed diminished ability to discriminate between the eight diet treatments when casts were analyzed. When areal surface texture parameters and traditional microwear variables were combined into a single discriminant function analysis, the cast data and original data produced the most similar results. Microwear researchers tend to favor either texture analysis or traditional microwear methods, better results may be generated by combining them. Although surface textures were not accurately reproduced by the casts, they retained sufficient information to discriminate between microwear of the experimental diets to a degree similar to the original teeth.

MicroWeaR: A new R package for dental microwear analysis

Mastication of dietary items with different mechanical properties leaves distinctive microscopic marks on the surface of tooth enamel. The inspection of such marks (dental microwear analysis) is informative about the dietary habitus in fossil as well as in modern species. Dental microwear analysis relies on the morphology, abundance, direction, and distribution of these microscopic marks. We present a new freely available software implementation, MicroWeaR, that, compared to traditional dental microwear tools, allows more rapid, observer error free, and inexpensive quantification and classification of all the microscopic marks (also including for the first time different subtypes of scars). Classification parameters and graphical rendering of the output are fully settable by the user. MicroWeaR includes functions to (a) sample the marks, (b) classify features into categories as pits or scratches and then into their respective subcategories (large pits, coarse scratches, etc.), (c) generate an output table with summary information, and (d) obtain a visual surface-map where marks are highlighted. We provide a tutorial to reproduce the steps required to perform microwear analysis and to test tool functionalities. Then, we present two case studies to illustrate how MicroWeaR works. The first regards a Miocene great ape obtained from through environmental scanning electron microscope, and other a Pleistocene cervid acquired by a stereomicroscope.

Molar Microwear of Narrow-Headed Vole (Microtus gregalis Pall., 1779) Depending on the Feed Abrasiveness

In the narrow-headed vole, enamel microwear of the first mandibular molar (of the protoconid and entoconid anterior enamel wall) was studied under the laboratory conditions and at the fixed feed composition. The classic parameters and the area of the enamel prism lesion were taken into account. The enamel lesion patterns caused by the tooth-tooth and tooth-food interactions have been determined. Differences were found between the voles kept on feed with different abrasive properties, as well as between the lingual and buccal conids of the first mandibular molar. In the Microtus species, the ratio of micro-lesions (pits and scratches) did not depend on the abrasive properties of the feed consumed. The extent of preservation of the enamel contour anterior edge depended on the feed composition and could be used as an indicator for indirect evaluation of the Microtus species diet.

Mechanical modelling of tooth wear

Different diets wear teeth in different ways and generate distinguishable wear and microwear patterns that have long been the basis of palaeodiet reconstructions. Little experimental research has been performed to study them together. Here, we show that an artificial mechanical masticator, a chewing machine, occluding real horse teeth in continuous simulated chewing (of 100 000 chewing cycles) is capable of replicating microscopic wear features and gross wear on teeth that resemble wear in specimens collected from nature. Simulating pure attrition (chewing without food) and four plant material diets of different abrasives content (at n = 5 tooth pairs per group), we detected differences in microscopic wear features by stereomicroscopy of the chewing surface in the number and quality of pits and scratches that were not always as expected. Using computed tomography scanning in one tooth per diet, absolute wear was quantified as the mean height change after the simulated chewing. Absolute wear increased with diet abrasiveness, originating from phytoliths and grit. In combination, our findings highlight that differences in actual dental tissue loss can occur at similar microwear patterns, cautioning against a direct transformation of microwear results into predictions about diet or tooth wear rate.

Dental microwear and Pliocene paleocommunity ecology of bovids, primates, rodents, and suids at Kanapoi

Reconstructions of habitat at sites like Kanapoi are key to understanding the environmental circumstances in which hominins evolved during the early Pliocene. While Australopithecus anamensis shows evidence of terrestrial bipedality traditionally associated with a more open setting, its enamel has low δ¹³C values consistent with consumption of C₃ foods, which predominate in wooded areas of tropical Africa. Habitat proxies, ranging from paleosols and their carbonates to associated herbivore fauna and their carbon isotope ratios, suggest a heterogeneous setting with both grass and woody plant components, though the proportions of each have been difficult to pin down. Here we bring dental microwear texture analysis of herbivorous fauna to bear on the issue. We present texture data for fossil bovids, primates, rodents, and suids (n = 107 individuals in total) from the hominin bearing deposits at Kanapoi, and interpret these in the light of closely related extant mammals with known differences in diet. The Kanapoi bovid results, for example, are similar to those for extant variable grazers or graze-browse intermediate taxa. The Kanapoi suid data vary by taxon, with one similar to the pattern of extant grazers and the other more closely resembling mixed feeders. The Kanapoi primates and rodents are more difficult to associate with a specific environment, though it seems that grass was likely a component in the diets of both. All taxa evince microwear texture patterns consistent with a mosaic of discrete microhabitats or a heterogeneous setting including both tree and grass components.

Ecomorphological analysis of the astragalo-calcaneal complex in rodents and inferences of locomotor behaviours in extinct rodent species

Studies linking postcranial morphology with locomotion in mammals are common. However, such studies are mostly restricted to caviomorphs in rodents. We present here data from various families, belonging to the three main groups of rodents (Sciuroidea, Myodonta, and Ctenohystrica). The aim of this study is to define morphological indicators for the astragalus and calcaneus, which allow for inferences to be made about the locomotor behaviours in rodents. Several specimens were dissected and described to bridge the myology of the leg with the morphology of the bones of interest. Osteological characters were described, compared, mechanically interpreted, and correlated with a “functional sequence” comprising six categories linked to the lifestyle and locomotion (jumping, cursorial, generalist, fossorial, climber and semi-aquatic). Some character states are typical of some of these categories, especially arboreal climbers, fossorial and “cursorial-jumping” taxa. Such reliable characters might be used to infer locomotor behaviours in extinct species. Linear discriminant analyses (LDAs) were used on a wider sample of species and show that astragalar and calcaneal characters can be used to discriminate the categories among extant species whereas a posteriori inferences on extinct species should be examined with caution.

Dental abrasion as a cutting process

A mammalian tooth is abraded when a sliding contact between a particle and the tooth surface leads to an immediate loss of tooth tissue. Over time, these contacts can lead to wear serious enough to impair the oral processing of food. Both anatomical and physiological mechanisms have evolved in mammals to try to prevent wear, indicating its evolutionary importance, but it is still an established survival threat. Here we consider that many wear marks result from a cutting action whereby the contacting tip(s) of such wear particles acts akin to a tool tip. Recent theoretical developments show that it is possible to estimate the toughness of abraded materials via cutting tests. Here, we report experiments intended to establish the wear resistance of enamel in terms of its toughness and how friction varies. Imaging via atomic force microscopy (AFM) was used to assess the damage involved. Damage ranged from pure plastic deformation to fracture with and without lateral microcracks. Grooves cut with a Berkovich diamond were the most consistent, suggesting that the toughness of enamel in cutting is 244 J m(-2), which is very high. Friction was higher in the presence of a polyphenolic compound, indicating that this could increase wear potential.

Dental microwear differences between eastern and southern African fossil bovids and hominins

Abstract Dental microwear has proven to be a valuable tool for reconstructing diets of fossil vertebrates. However, recent studies have suggested that the pattern of microscopic scratches and pits on teeth may be more reflective of environmental grit than of food preferences. Could differences in dental microwear between early hominins, for example, therefore be a result of dust level rather than of diet? We investigated this possibility using a palaeocommunity approach. We compared microwear texture differences between eastern and southern African Hominini, along with Plio-Pleistocene specimens representing two tribes of bovids, Alcelaphini and Antilopini, from the same deposits as the early hominins. If exogenous grit swamps diet signals, we would expect community-wide microwear patterns separating samples by region. Results indicate that each of the three tribes shows a different pattern of variation of microwear textures between eastern and southern Africa. These results imply that differences in microwear reflect diet rather than grit load, and that microwear can provide valuable information not just about environmental dust level, but about food preferences of fossil vertebrates.

Identification of novel Fgf enhancers and their role in dental evolution

Mammalian dental morphology is under strong evolutionary pressure because of its importance for mastication and diet. While the mechanisms underlying tooth development have been widely studied in model organisms, the role of genetic regulatory elements in patterning the different elements of the occlusal surface and crown height across species is not well understood. Previous studies showed that Fibroblast Growth Factor (FGF) genes are important regulators of tooth development that influence morphological variation. We hypothesized that inter-specific variation in rodent dental morphology could be governed by nucleotide variation in genetic regulatory elements that modulate the spatial and temporal expression of the genes encoding FGF signaling molecules. In this study, we compared the variation in dental morphology across nine taxa of rodents to the variation in sequences of non-coding evolutionary conserved regions (ECRs) of Fgf3, 4, 8, 9, and 10. We correlated the variation in molar tooth cusp shape and the evolution of high molar crowns (hypsodonty) to the patterns of sequence variation in two ECRs, Fgf10ECR3, and Fgf9ECR1, respectively. By conducting luciferase and electrophoretic mobility shift assays, we determined that these ECRs could function as enhancers. These data suggest that emergence of hypsodonty and occlusal cusp patterning may have happened through the evolutionary changes in enhancers, such as Fgf9ECR1 and Fgf10ECR3, which affected the expression of major signaling molecules involved in tooth development.

Dietary proclivities of Paranthropus robustus from Swartkrans, South Africa

Pleistocene Paranthropus robustus fossils from Swartkrans have yielded stable isotope values suggesting some foraging on C4 plants possibly including underground storage organs. Dental microwear texture analysis on P. robustus (SK 6, SK 34 and SK 47) from Swartkrans Member 1 is performed to examine whether tooth surface damage from mastication agrees with prior dietary inferences from carbon isotopes. There is considerable variation in textural characteristics among the P. robustus specimens. Specifically, adult SK 34 stands apart from the two subadult specimens, SK 6 and SK 47, suggesting life history could be reflected in patterns of dental microwear texture characteristics, although seasonality and availability of fallback foods may also explain the variation observed in P. robustus. The fossils all exhibit elevated surface texture complexity, resembling the values for Lophocebus albigena and Cebus apella, and to a lesser extent, Pan troglodytes. Paranthropus robustus is dissimilar to primary folivores, such as Trachypithecus cristatus or folivore- frugivores such as Alouatta palliata suggesting leaves comprised very little of its diet. The textural fill volume of P. robustus differs from that observed in extant primates from tropical forests indicating extreme durophagy, perhaps a function of differences in habitat. Ingestion of extraneous grit on the underground parts of plants and from terrestrial resources, perhaps as fallback foods or as dietary staples, may account for these enamel textural properties and may help explain the mixed C3/C4 isotopic signal in P. robustus.

Similar associations of tooth microwear and morphology indicate similar diet across marsupial and placental mammals

Low-magnification microwear techniques have been used effectively to infer diets within many unrelated mammalian orders, but the extent to which patterns are comparable among such different groups, including long extinct mammal lineages, is unknown. Microwear patterns between ecologically equivalent placental and marsupial mammals are found to be statistically indistinguishable, indicating that microwear can be used to infer diet across the mammals. Microwear data were compared to body size and molar shearing crest length in order to develop a system to distinguish the diet of mammals. Insectivores and carnivores were difficult to distinguish from herbivores using microwear alone, but combining microwear data with body size estimates and tooth morphology provides robust dietary inferences. This approach is a powerful tool for dietary assessment of fossils from extinct lineages and from museum specimens of living species where field study would be difficult owing to the animal’s behavior, habitat, or conservation status.

Dietary reconstruction of Pliocene Parapapio whitei from Makapansgat, South Africa, using dental microwear texture analysis

Pliocene Parapapio whitei fossils from Makapansgat have yielded stable isotope values suggesting some foraging on C4 plants and possibly underground storage organs (USOs). Dental microwear texture analysis on Pp.whitei (M 3147, MP 62, MP 223 and MP 239) from Makapansgat Members 3-4 is performed to examine whether tooth surface damage from mastication agrees with prior dietary inferences from isotopes. The enamel surface texture of Pp. whitei is relatively complex, resembling Lophocebus albigena and Cebusapella, and lacks the anisotropy of Trachypithecuscristatus and Alouattapalliata. The textural fill volume of Pp. whitei is distinct from extant forest primates suggesting extremes in hard-object consumption. Grit adhering to USOs is offered as an explanation for these enamel textural properties, corroborating the inference that Pp. whitei supplemented its diet with terrestrial resources. © 2013 S. Karger AG, Basel.

Direct comparisons of 2D and 3D dental microwear proxies in extant herbivorous and carnivorous mammals

The analysis of dental microwear is commonly used by paleontologists and anthropologists to clarify the diets of extinct species, including herbivorous and carnivorous mammals. Currently, there are numerous methods employed to quantify dental microwear, varying in the types of microscopes used, magnifications, and the characterization of wear in both two dimensions and three dimensions. Results from dental microwear studies utilizing different methods are not directly comparable and human quantification of wear features (e.g., pits and scratches) introduces interobserver error, with higher error being produced by less experienced individuals. Dental microwear texture analysis (DMTA), which analyzes microwear features in three dimensions, alleviates some of the problems surrounding two-dimensional microwear methods by reducing observer bias. Here, we assess the accuracy and comparability within and between 2D and 3D dental microwear analyses in herbivorous and carnivorous mammals at the same magnification. Specifically, we compare observer-generated 2D microwear data from photosimulations of the identical scanned areas of DMTA in extant African bovids and carnivorans using a scanning white light confocal microscope at 100x magnification. Using this magnification, dental microwear features quantified in 2D were able to separate grazing and frugivorous bovids using scratch frequency; however, DMTA variables were better able to discriminate between disparate dietary niches in both carnivorous and herbivorous mammals. Further, results demonstrate significant interobserver differences in 2D microwear data, with the microwear index remaining the least variable between experienced observers, consistent with prior research. Overall, our results highlight the importance of reducing observer error and analyzing dental microwear in three dimensions in order to consistently interpret diets accurately.

Correlated changes in occlusal pattern and diet in stem Murinae during the onset of the radiation of Old World rats and mice

Adaptive radiations in mammals are sometimes associated with the emergence of key dental innovations facilitating food processing and masticatory movements. The dietary aspects of such innovations constitute an important focus in evolutionary biology. Murine rodents, which originated during middle Miocene, currently constitute the largest extant mammalian subfamily. Their adaptive radiation combines an original chewing motion with a peculiar occlusal pattern. The fossil record clearly establishes the timing of acquisitions of those innovations, and the aim of our study was to estimate the dietary changes associated with each of them. Fossil taxa phylogenetically closest to Murinae were investigated through the use of geographic information system applied on maps obtained from first upper molars digitized by X-ray synchrotron microtomography. This methodology enables estimation of quantitative topographic descriptors of the dietary specializations of the molar crown. The peculiar forwardly directed chewing motion acquired by stem Murinae may have been a key innovation allowing the invasion of an insectivorous dietary niche. The further radiation of crown Murinae coincides with the return to the plant-dominated omnivorous dietary niche of their distant ancestors through the acquisition of new morphological traits. The retention of the forwardly directed chewing motion by the crown Murinae could have become a competitive advantage in the context of a more generalist diet.

Global climate changes drive ecological specialization of mammal faunas: trends in rodent assemblages from the Iberian Plio-Pleistocene

Background

Several macroevolutionary hypotheses propose a synchrony between climatic changes and variations in the structure of faunal communities. Some of them focus on the importance of the species ecological specialization because of its effects on evolutionary processes and the resultant patterns. Particularly, Vrba’s turnover pulse hypothesis and resource-use hypothesis revolve around the importance of biome inhabitation. In order to test these hypotheses, we used the Biomic Specialization Index, which is based on the number of biomes occupied by each species, and evaluated the changes in the relative importance of generalist and specialist rodents in more than forty fossil sites from the Iberian Plio-Pleistocene.

Results

Our results indicate that there was a decrease in the specialization degree of rodent faunas during the Pliocene due to the global cooling that triggered the onset of the glacial events of the Cenozoic (around 2.75 Ma). The subsequent faunal transition after this critical paleoenvironmental event was characterized by an increase of specialization related to the adaptation to the new environmental conditions, which was mainly associated with the Pleistocene radiation of Arvicolinae (voles).

Conclusions

The pattern of faunal turnover is correlated with the development of the modern glaciations in the Northern Hemisphere around 2.75 Ma, and represents a reorganization of the rodent communities, as suggested by the turnover pulse hypothesis. Our data also support the resource-use hypothesis, which presumes the role of the degree of specialization in resources specifically related to particular biomes as a driver of differential speciation and extinction rates. These results stress the intimate connection between ecological and evolutionary changes.

Dietary abrasiveness is associated with variability of microwear and dental surface texture in rabbits

Dental microwear and 3D surface texture analyses are useful in reconstructing herbivore diets, with scratches usually interpreted as indicators of grass dominated diets and pits as indicators of browse. We conducted feeding experiments with four groups of rabbits (Oryctolagus cuniculus) each fed a different uniform, pelleted diet (lucerne, lucerne & oats, grass & oats, grass). The lowest silica content was measured in the lucerne and the highest in the grass diet. After 25 weeks of exposure to the diets, dental castings were made of the rabbit's lower molars. Occlusal surfaces were then investigated using dental microwear and 3D areal surface texture analysis. In terms of traditional microwear, we found our hypothesis supported, as the grass group showed a high proportion of (long) “scratches” and the lucerne group a high proportion of “pits”. Regardless of the uniform diets, variability of microwear and surface textures was higher when silica content was low. A high variability in microwear and texture analysis thus need not represent dietary diversity, but can also be related to a uniform, low-abrasion diet. The uniformity or variability of microwear/texture analysis results thus might represent varying degrees of abrasion and attrition rather than a variety of diet items per se.

The primate community of Cachoeira (Brazilian Amazonia): a model to decipher ecological partitioning among extinct species

Dental microwear analysis is conducted on a community of platyrrhine primates from South America. This analysis focuses on the primate community of Cachoeira Porteira (Para, Brazil), in which seven sympatric species occur: Alouatta seniculus, Ateles paniscus, Cebus apella, Chiropotes satanas, Pithecia Pithecia, Saguinus midas, and Saimiri sciureus. Shearing quotients are also calculated for each taxon of this primate community. Dental microwear results indicate significant differences between taxa, but are somewhat insufficient when it comes to discriminating between ecologically similar taxa. The primates of Cachoeira Porteira all incorporate a certain amount of fruit in their diet, entailing a definite amount of inter-specific competition as they must share food resources. Alouatta is the most folivorous taxon of this community, which is corroborated by dental microwear analysis. Ateles, although of a similar size to Alouatta, limits inter-specific competition by incorporating more fruit in its diet. Cebus has a very diverse omnivorous diet, which is highlighted in this study, as it compares to both fruit and leaf eating taxa. In some cases, microwear results need to be supplemented by other methods. For example, dental microwear seems insufficient to distinguish between Pithecia and Chiropotes, which eat foods with similar physical properties. However, other methods (i.e. shearing quotients and body mass) provide enough complimentary information to be able to highlight differences between the two taxa. On the other hand, dental microwear can highlight differences between primates which have similar diets, such as Saimiri and Saguinus. In this case, differences could be due to other exogenous factors.