Controlling enzymatic activity by immobilization on graphene oxide

Adenylate kinase immobilized on graphene oxide impairs progression of human lung carcinoma epithelial cells through adenosinergic pathway

Purinergic signaling, the oldest evolutionary transmitter system, has been increasingly studied as a pivotal target for novel anti-cancer therapies. In the present work, the developed nanobiocatalytic system consisting of adenylate kinase immobilized on graphene oxide (AK-GO) was characterized in terms of its physicochemical and biochemical properties. We put special emphasis on the AK-GO influence on purinergic signaling components, that is, ecto-nucleotides concentration and ecto-enzymes expression and activity in human lung carcinoma epithelial (A549) cells. The immobilization-dependent modification of AK kinetic parameters allowed for the removal of ATP excess while maintaining low ATP concentrations, efficient decrease in adenosine concentration, and control of the nucleotide balance in carcinoma cells. The cyto- and hemocompatibility of developed AK-GO nanobiocatalytic system indicates that it can be successfully harnessed for biomedical applications. In A549 cells treated with AK-GO nanobiocatalytic system, the significantly decreased adenosinergic signaling results in reduction of the proliferation and migration capability of cancer cells. This finding is particularly relevant in regard to AK-GO prospective anti-cancer applications.

Recent Prospects of Carbonaceous Nanomaterials-Based Laccase Biosensor for Electrochemical Detection of Phenolic Compounds

Phenolic compounds (PhCs) are ubiquitously distributed phytochemicals found in many plants, body fluids, food items, medicines, pesticides, dyes, etc. Many PhCs are priority pollutants that are highly toxic, teratogenic, and carcinogenic. Some of these are present in body fluids and affect metabolism, while others possess numerous bioactive properties such as retaining antioxidant and antimicrobial activity in plants and food products. Therefore, there is an urgency for developing an effective, rapid, sensitive, and reliable tool for the analysis of these PhCs to address their environmental and health concern. In this context, carbonaceous nanomaterials have emerged as a promising material for the fabrication of electrochemical biosensors as they provide remarkable characteristics such as lightweight, high surface: volume, excellent conductivity, extraordinary tensile strength, and biocompatibility. This review outlines the current status of the applications of carbonaceous nanomaterials (CNTs, graphene, etc.) based enzymatic electrochemical biosensors for the detection of PhCs. Efforts have also been made to discuss the mechanism of action of the laccase enzyme for the detection of PhCs. The limitations, advanced emerging carbon-based material, current state of artificial intelligence in PhCs detection, and future scopes have also been summarized.

A Simple Replica Method as the Way to Obtain a Morphologically and Mechanically Bone-like Iron-Based Biodegradable Material

Porous iron-based scaffolds were prepared by the simple replica method using polyurethane foam as a template and applying the sintering process in a tube furnace. Their surface morphology was characterized using scanning electron microscopy (SEM) and phase homogeneity was confirmed using X-ray diffraction (XRD). Corrosion behavior was determined using immersion and potentiodynamic polarization methods in phosphate buffered saline (PBS). The surface energy was calculated by studying the changes of enthalpy of calorimetric immersion. A preliminary biological test was also carried out and was done using the albumin adsorption procedure. Results of our work showed that in using the simple replica method it is possible to obtain iron biomaterial with morphology and mechanical properties almost identical to bones, and possessing adequate wettability, which gives the potential to use this material as biomaterial for scaffolds in orthopedics.

Graphene Oxide-Cytochrome c Multilayered Structures for Biocatalytic Applications: Decrypting the Role of Surfactant in Langmuir-Schaefer Layer Deposition

Graphene, a two-dimensional single-layer carbon allotrope, has attracted tremendous scientific interest due to its outstanding physicochemical properties. Its monatomic thickness, high specific surface area, and chemical stability render it an ideal building block for the development of well-ordered layered nanostructures with tailored properties. Herein, biohybrid graphene-based layer-by-layer structures are prepared by means of conventional and surfactant-assisted Langmuir-Schaefer layer deposition techniques, whereby cytochrome c molecules are accommodated within ordered layers of graphene oxide. The biocatalytic activity of the as-developed nanobio-architectures toward the enzymatic oxidation of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt and decolorization of pinacyanol chloride is tested. The results show that the multilayer structures exhibit high biocatalytic activity and stability in the absence of surfactant molecules during the deposition of the monolayers.

Immobilization of Sucrose Isomerase from Erwinia sp. with Graphene Oxide and Its Application in Synthesizing Isomaltulose

Sucrose isomerase (SIase) is a key enzyme used for the production of isomaltulose from sucrose. In this study, an SIase gene from Erwinia sp. Ejp617 (ErSIase) was heterologously expressed in Escherichia coli BL21(DE3), and the recombinant ErSIase was served as biocatalyst combined with the graphene oxide (GO) as carrier for ErSIase immobilization. The Fourier transform infrared spectroscopy, transmission electron microscope, and confocal laser microscopy analyses showed that ErSIase was successfully immobilized on the surface of GO to form ErSIase-GO. The loading capacity of ErSIase on GO reached up to 460 mg/g with a specific activity of 727.04 U/mg protein when the optimal immobilization time of 12 h and the ErSIase/GO ratio of 7.4:4 (w/w) were applied. A high conversion rate of 95.3% was reached from sucrose to isomaltulose using ErSIase-GO as biocatalyst with 600 g/L sucrose as substrate, after 180 min at 40 °C and pH 6.0. Moreover, stabilities of the immobilized ErSIase-GO in the aspects of thermal, pH, and storage were improved, and its activity after 10 batches still remained around 80% under the optimal conditions. The Km value of ErSIase-GO was 29.32 mM, and the kcat/Km was increased to 27.34 s-1 mM-1 when 0.1% (w/v) detergent NP40 was added. These results indicated that the ErSIase was well immobilized onto GO, and the ErSIase-GO is a promising biocatalyst with high operational stability and catalytic activity for industrial production of isomaltulose.

Effect of Triton X-100 on the Activity and Selectivity of Lipase Immobilized on Chemically Reduced Graphene Oxides

The effect of support hydrophobicity on lipase activity and substrate selectivity was investigated with and without Triton X-100 (TX-100). Lipases from Thermomyces lanuginosa (TL) and Alcaligenes sp. (QLM) were immobilized on graphene oxide (GO) and a range of chemically reduced graphene oxides (CRGOs) with different levels of surface hydrophobicity. Activity assays using 4-hydroxy-N-propyl-1,8-naphthalimide (NAP) esters of varying chain lengths (NAP-butyrate (NAP-B), NAP-octanoate (NAP-O), and NAP-palmitate (NAP-P)) showed that the activity of immobilized QLM and TL decreased by more than 60% on GO and 80% on CRGO (2 h), with activity decreasing further as surface hydrophobicity of the CRGOs increased. Across the hydrophobicity range of GO/CRGOs, the substrate selectivity of QLM shifted from more readily hydrolyzing NAP-P to NAP-B, while TL retained its substrate selectivity for NAP-O. Lipase TL was also shown to desorb from GO and 2 h CRGO when mixed with NAP-O and NAP-P, whereas QLM did not. Circular dichroism analyses of the lipase α-helix content correlate to the observed activity data, with decreases in the α-helical content (40% in TL and 20% in QLM relative to free lipase) consistent with decreases in activity after immobilization on GO. α-Helical content decreased even further as the surface hydrophobicity of CRGOs increased. Attenuated total reflectance-Fourier transform infrared spectroscopy also showed significant changes to the lipase secondary structure upon immobilization. The addition of TX-100 into the activity assay modified the substrate selectivity of immobilized QLM, improving the activity against NAP-O (90%) and NAP-P (67%) compared to the activity measured without TX-100. It was shown that TX-100 primarily affected the activity of QLM by interacting with the ester substrate and the lipase itself. This study provides an improved understanding of how support hydrophobicity and the presence of TX-100 can affect activity/selectivity of lipases immobilized on hydrophobic supports.

Protein Corona Hinders N-CQDs Oxidative Potential and Favors Their Application as Nanobiocatalytic System

The oxidative properties of nanomaterials arouse legitimate concerns about oxidative damage in biological systems. On the other hand, the undisputable benefits of nanomaterials promote them for biomedical applications; thus, the strategies to reduce oxidative potential are urgently needed. We aimed at analysis of nitrogen-containing carbon quantum dots (N-CQDs) in terms of their biocompatibility and internalization by different cells. Surprisingly, N-CQD uptake does not contribute to the increased oxidative stress inside cells and lacks cytotoxic influence even at high concentrations, primarily through protein corona formation. We proved experimentally that the protein coating effectively limits the oxidative capacity of N-CQDs. Thus, N-CQDs served as an immobilization support for three different enzymes with the potential to be used as therapeutics. Various kinetic parameters of immobilized enzymes were analyzed. Regardless of the enzyme structure and type of reaction catalyzed, adsorption on the nanocarrier resulted in increased catalytic efficiency. The enzymatic-protein-to-nanomaterial ratio is the pivotal factor determining the course of kinetic parameter changes that can be tailored for enzyme application. We conclude that the above properties of N-CQDs make them an ideal support for enzymatic drugs required for multiple biomedical applications, including personalized medical therapies.

Challenges and perspectives of the β-galactosidase enzyme

The enzyme β-galactosidase has great potential for application in the food and pharmaceutical industries due to its ability to perform the hydrolysis of lactose, a disaccharide present in milk and in dairy by-products. It can be used in free form, in batch processes, or in immobilized form, which allows continuous operation and provides greater enzymatic stability. The choice of method and support for enzyme immobilization is essential, as the performance of the biocatalyst is strongly influenced by the properties of the material used and by the interaction mechanisms between support and enzyme. Therefore, this review showed the main enzyme immobilization techniques, and the most used supports for the constitution of biocatalysts. Also, materials with the potential for immobilization of β-galactosidases and the importance of their biotechnological application are presented. KEY POINTS: • The main methods of immobilization are physical adsorption, covalent bonding, and crosslinking. • The structural conditions of the supports are determining factors in the performance of the biocatalysts. • Enzymatic hydrolysis plays an important role in the biotechnology industry.

A New Approach to Obtaining Nano-Sized Graphene Oxide for Biomedical Applications

Graphene oxide (GO) is one of the most exciting and widely used materials. A new method of nanographene oxide (n-GO) formation is presented. The described unique sequence of ultrasonication in dimethyl sulfoxide solution allows us to obtain different sizes of n-GO sheets by controlling the timing of the cutting and re-aggregation processes. The obtained n-GO exhibits only minor spectral changes, mainly due to the formation of S-containing surface groups; thus, it can be concluded that the material is not reduced during the process. Maintaining the initial oxygen functionalities together with the required nano-size (down to 200 nm) and high homogeneity are beneficial for extensive applications of n-GO. Moreover, we prove that the obtained material is evidently biocompatible. The calculated half-maximal effective concentration (EC50) increases by 5-fold, i.e., from 50 to 250 µg/mL, when GO is converted to n-GO. As a consequence, the new n-GO neither disturbs blood flow even in the narrowest capillaries nor triggers a toxic influence in surrounding cells. Thus, it can be a serious candidate for drugs and biomolecule carriers administered systemically.

Ciprofloxacin and Graphene Oxide Combination-New Face of a Known Drug

Drug modification with nanomaterials is a new trend in pharmaceutical studies and shows promising results, especially considering carbon-based solutions. Graphene and its derivatives have attracted much research interest for their potential applications in biomedical areas as drug modifiers. The following work is a comprehensive study regarding the toxicity of ciprofloxacin (CIP) modified by graphene oxide (GO). The influence on the morphology, viability, cell death pathway and proliferation of T24 and 786-0 cells was studied. The results show that ciprofloxacin modified with graphene oxide (CGO) shows the highest increase in cytotoxic potential, especially in the case of T24 cells. We discovered a clear connection between CIP modification with GO and the increase in its apoptotic potential. Our results show that drug modification with carbon-based nanomaterials might be a promising strategy to improve the qualities of existing drugs. Nevertheless, it is important to remember that cytotoxicity effects are highly dependent on dose and nanomaterial size. It is necessary to conduct further research to determine the optimal dose of GO for drug modification.

Congo Red Decolorization Using Textile Filters and Laccase-Based Nanocomposites in Continuous Flow Bioreactors

Removal of azo and diazo dye content from textile industry wastewaters is crucial due to their environmental impact. Here, we report on the use of the fungal laccase from Pycnoporus sanguineus CS43 immobilized on silica nanoparticles and entrapped in textile-based filters for the degradation of Congo Red. Laccase immobilization and synthesis of the nanocomposites were carried out by two different methods, one in the presence of acetone and the second using water as solvent. This led to a change in the hydrophobicity of the obtained biofilters. Successful preparation of the nanocomposites was confirmed via FTIR spectroscopy. Changes in the secondary structure of the enzyme were inspected through the second derivative of the FTIR spectra. Six different types of filter were fabricated and tested in a continuous flow bioreactor in terms of their decolorization capabilities of Congo Red. The results indicate removal efficiencies that approached 40% for enzymes immobilized on the more hydrophobic supports. Backscattered electron (BSE) images of the different filters were obtained before and after the decolorization process. Percentage of decolorization and activity loss were determined as a function of time until a plateau in decolorization activity was reached. Experimental data was used to recreate the decolorization process in COMSOL Multiphysics® (Stockholm, Sweden). These simulations were used to determine the proper combination of parameters to maximize decolorization. Our findings suggest that the treatment of textile-based filters with immobilized laccase in conjunction with hydrophobic nanocomposites provides a suitable avenue to achieve more efficient laccase dye decolorization (39%) than that obtained with similar filters treated only with free laccase (8%). Filters treated with silica-based nanocomposites and immobilized laccases showed an increase in their decolorization capability, probably due to changes in their wetting phenomena.

Lipase immobilized on functionalized superparamagnetic few-layer graphene oxide as an efficient nanobiocatalyst for biodiesel production from Chlorella vulgaris bio-oil

BACKGROUND

Microalgae, due to its well-recognized advantages have gained renewed interest as potentially good feedstock for biodiesel. Production of fatty acid methyl esters (FAMEs) as a type of biodiesel was carried out from Chlorella vulgaris bio-oil. Biodiesel was produced in the presence of nano-biocatalysts composed of immobilized lipase on functionalized superparamagnetic few-layer graphene oxide via a transesterification reaction. A hybrid of few-layer graphene oxide and Fe3O4 (MGO) was prepared and characterized. The MGO was functionalized with 3-aminopropyl triethoxysilane (MGO-AP) as well as with a couple of AP and glutaraldehyde (MGO-AP-GA). The Rhizopus oryzae lipase (ROL) was immobilized on MGO and MGO-AP using electrostatic interactions as well as on MGO-AP-GA using covalent bonding. The supports, MGO, MGO-AP, and MGO-AP-GA, as well as nano-biocatalyst, ROL/MGO, ROL/MGO-AP, and ROL/MGO-AP-GA, were characterized using FESEM, VSM, FTIR, and XRD. The few-layer graphene oxide was characterized using AFM and the surface charge of supports was evaluated with the zeta potential technique. The nano-biocatalysts assay was performed with an evaluation of kinetic parameters, loading capacity, relative activity, time-course thermal stability, and storage stability. Biodiesel production was carried out in the presence of nano-biocatalysts and their reusability was evaluated in 5 cycles of transesterification reaction.

RESULTS

The AFM analysis confirmed the few-layer structure of graphene oxide and VSM also confirmed that all supports were superparamagnetic. The maximum loading of ROL (70.2%) was related to MGO-AP-GA. The highest biodiesel conversion of 71.19% achieved in the presence of ROL/MGO-AP-GA. Furthermore, this nano-biocatalyst could maintain 58.77% of its catalytic performance after 5 cycles of the transesterification reaction and was the best catalyst in the case of reusability.

CONCLUSIONS

In this study, the synthesized nano-biocatalyst based on bare and functionalized magnetic graphene oxide was applied and optimized in the process of converting microalgae bio-oil to biodiesel for the first time and compared with bare lipase immobilized on magnetic nanoparticles. Results showed that the loading capacity, kinetic parameters, thermal stability, and storage stability improved by the functionalization of MGO. The biocatalysts, which were prepared via covalent bonding immobilization of enzyme generally, showed better characteristics.

Graphene oxide flake activation via divinylsulfone – a procedure for efficient β-galactosidase immobilization

Flaky graphene oxide was activated with divinylsulfone followed by immobilization of the β-galactosidase enzyme. An active and stable preparation was obtained. β-galactosidase stability after immobilization was much higher than with the native enzyme. The half-life time of the immobilized enzyme was estimated as 165 hours, while for the native form, the estimate was only 5 hours. The developed procedure for the preparation of flaked graphene and its use in the chemical immobilization of enzymes can be used for any enzyme. A processing solution for continuous operation was proposed and verified using cow’s milk, with lactose as the hydrolysed substrate, as a dosing stream. Lactose, a milk sugar, was effectively hydrolysed. Product for allergy sufferers who cannot digest lactose has been obtained in this way.

Multi-point enzyme immobilization, surface chemistry, and novel platforms: a paradigm shift in biocatalyst design

Engineering enzymes with improved catalytic properties in non-natural environments have been concerned with their diverse industrial and biotechnological applications. Immobilization represents a promising but straightforward route, and immobilized biocatalysts often display higher activities and stabilities compared to free enzymes. Owing to their unique physicochemical characteristics, including the high-specific surface area, exceptional chemical, electrical, and mechanical properties, efficient enzyme loading, and multivalent functionalization, nano-based materials are postulated as suitable carriers for biomolecules or enzyme immobilization. Enzymes immobilized on nanomaterial-based supports are more robust, stable, and recoverable than their pristine counterparts, and are even used for continuous catalytic processes. Furthermore, the unique intrinsic properties of nanomaterials, particularly nanoparticles, also confer the immobilized enzymes to be used for their broader applications. Herein, an effort has been made to present novel potentialities of multi-point enzyme immobilization in the current biotechnological sector. Various nano-based platforms for enzyme/biomolecule immobilization are discussed in the second part of the review. In summary, recent developments in the use of nanomaterials as new carriers to construct robust nano-biocatalytic systems are reviewed, and future trends are pointed out in this article.

Covalently immobilized catalase on functionalized graphene: effect on the activity, immobilization efficiency, and tetramer stability

Herein we describe, for the first time, the covalent immobilization of catalase (CAT) on functionalized graphene surfaces (G) by exploiting the azalactone chemistry for the post-functionalization of graphene-based materials. The structure, morphology and chemical composition of catalase immobilized on graphene (CAT-G) have been investigated by Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX). The biological responses such as catalytic activity, cellular uptake, internalization pathway, and the ability to protect lymphocytes from oxidative stress induced by H2O2 together with the unforeseen ability to increase the lifetime of the free catalase in solution have been deeply investigated. From our studies, it is evident that the behavior of CAT covalently linked to modified graphene depends on the CAT/G ratio that affects the secondary structure and the tetramer stability of CAT. In order to support the experimental results, we have also investigated the behaviors of two appropriately designed model systems, named CAT-surfer and CAT-skier, by molecular dynamics calculations. These in silico results parallel the experimental results proving our hypothesis that the CAT-surfer maintains the conformational flexibility needed for a biological response, whereas CAT-skier favors the dissociation of the tetramer subunits, involving the inactivation of the enzyme.

Chemical and Biochemical Approach to Make a Perfect Biocatalytic System on Carbonaceous Matrices

Enzymatic processes are widely used in food industry, pharmacy, cosmetic and household chemistry, and medicine. However, the common and efficient application of the biological catalysts is limited by a number of factors that influence enzymes activity. One of the most frequent methods to improve the biocatalysts' properties is immobilization. This chapter presents a recent overview of our attempts to obtain the perfect biocatalytic system. The experimental approach, proposed in this chapter, includes the critical points like: the choice of adequate immobilization method, most suitable carrier, determination of enzyme kinetic parameters, stability, and toxicity of obtained systems. As carbon materials including graphene-derived materials offer unique properties and a plenty of different modifications, these parameters seem to be of decisive importance to understand chemistry of complex systems. Consideration of all the mentioned requirements lead us to the conclusion that graphene oxide could be the best candidate for support in perfect biocatalytic systems.

Influence of Three Commercial Graphene Derivatives on the Catalytic Properties of a Lactobacillus plantarum α-l-Rhamnosidase When Used as Immobilization Matrices

The modification of carbon nanomaterials with biological molecules paves the way toward their use in biomedical and biotechnological applications, such as next-generation biocatalytic processes, development of biosensors, implantable electronic devices, or drug delivery. In this study, different commercial graphene derivatives, namely, monolayer graphene oxide (GO), graphene oxide nanocolloids (GOCs), and polycarboxylate-functionalized graphene nanoplatelets (GNs), were compared as biomolecule carrier matrices. Detailed spectroscopic analyses showed that GO and GOC were similar in composition and functional group content and very different from GN, whereas divergent morphological characteristics were observed for each nanomaterial through microscopy analyses. The commercial α-l-rhamnosidase RhaB1 from the probiotic bacterium Lactobacillus plantarum, selected as a model biomolecule for its relevant role in the pharma and food industries, was directly immobilized on the different materials. The binding efficiency and biochemical properties of RhaB1-GO, RhaB1-GOC, and RhaB1-GN composites were analyzed. RhaB1-GO and RhaB1-GOC showed high binding efficiency, whereas the enzyme loading on GN, not tested in previous enzyme immobilization studies, was low. The enzyme showed contrasting changes when immobilized on the different material supports. The effect of pH on the activity of the three RhaB1-immobilized versions was similar to that observed for the free enzyme, whereas the activity-temperature profiles and the response to the presence of inhibitors varied significantly between the RhaB1 versions. In addition, the apparent K_m for the immobilized and soluble enzymes did not change. Finally, the free RhaB1 and the immobilized enzyme in GOC showed the best storage and reutilization stability, keeping most of their initial activity after 8 weeks of storage at 4 °C and 10 reutilization cycles, respectively. This study shows, for the first time, that distinct commercial graphene derivatives can influence differently the catalytic properties of an enzyme during its immobilization.

Novel biocatalytic systems for maintaining the nucleotide balance based on adenylate kinase immobilized on carbon nanostructures

In this study graphene oxide (GO), carbon quantum dots (CQD) and carbon nanoonions (CNO) have been characterized and applied for the first time as a matrix for recombinant adenylate kinase (AK, EC 2.7.4.3) immobilization. AK is an enzyme fulfilling a key role in metabolic processes. This phosphotransferase catalyzes the interconversion of adenine nucleotides (ATP, ADP and AMP) and thereby participates in nucleotide homeostasis, monitors a cellular energy charge as well as acts as a component of purinergic signaling system. The AK activity in all obtained biocatalytic systems was higher as compared to the free enzyme. We have found that the immobilization on carbon nanostructures increased both activity and stability of AK. Moreover, the biocatalytic systems consisting of AK immobilized on carbon nanostructures can be easily and efficiently lyophilized without risk of desorption or decrease in the catalytic activity of the investigated enzyme. The positive action of AK-GO biocatalytic system in maintaining the nucleotide balance in in vitro cell culture was proved.