MIL-53(Al)@HC nanohybrid for bicomponent adsorption of ibuprofen and metsulfuron-methyl: Application of macro- and microscopic models and competition between contaminants

In this work, a hybrid was synthesized by hydrothermal treatment, metal-organic framework functionalized with hydrochar (MIL-53(Al)@HC) for the adsorption of two organic molecules Ibuprofen sodium salt and Metsulfuron-methyl, in binary system. The hybrid is composed of 71 wt% biomass and 29 wt% MOF. TGA, BET, FTIR, XRD and XPS characterization techniques were used to verify the hybridization of MIL-53(Al)@HC. The MIL-53(Al)@HC hybrid showed in situ MIL-53(Al) crystal growth capability. Batch adsorption experiments were carried out to study the effect of pH, adsorbent dosage, adsorbate concentration, contact time and temperature effect. The results obtained under extreme conditions demonstrate that MIL-53(Al)@HC is an adsorbent capable of removing >98% of IBU and MTM in mixture at a concentration of 0.3 mM (68 ppm IBU and 115 ppm MTM). The pseudo-second order model adequately described the adsorption kinetics and equilibrium using the Sips and Freundlich models. The physico-statistical microscopic model (2-layer) corroborated the hypothesis of a multilayer adsorption proposed by the macroscopic Freundlich model. In the competition study between IBU and MTM, both antagonistic and synergistic effects were observed. In the thermodynamic study, positive values of (ΔH°) indicate that adsorption is endothermic in nature and that the dominant mechanism is physisorption. A mechanism of adsorption by hydrogen bridging and non-covalent π*-π adsorbate-adsorbate and adsorbate-adsorbate-adsorbate interactions was proposed. The desorption study shows that in 5 washing cycles MIL-53(Al)@HC is a recoverable material.

Using NIR irradiation and magnetic bismuth ferrite microparticles to accelerate the removal of polystyrene microparticles from the drinking water

Magnetic bismuth ferrite (BiFO) microparticles were employed for the first time for the removal of polystyrene (PS) nano/microplastics from the drinking water. BiFO is formed by porous agglomerates with sizes of 5-11 μm, while the PS nano/microparticles have sizes in the range of 70-11000 nm. X-ray diffraction studies demonstrated that the BiFO microparticles are composed of BiFeO3/Bi25FeO40 (the content of Bi25FeO40 is ≈ 8.6%). Drinking water was contaminated with PS nano/microparticles (1 g L-1) and BiFO microparticles were also added to the contaminated water. Later, the mixture of PS-particles + BiFO was irradiated with NIR light (980 nm). Consequently, PS nano/microparticles melted on the BiFO microparticles due to the excessive heating on their surface. At the same time, the NIR (near infrared) light generated oxidizing agents (∙OH and h+), which degraded the by-products formed during the photocatalytic degradation of PS nano/microparticles. Subsequently, the NIR irradiation was stopped, and a Neodymium magnet was utilized to separate the BiFO microparticles from the water. This last procedure also permitted the removal of PS nano/microparticles by physical adsorption. Zeta potential measurements demonstrated that the BiFO surface was positively charged, allowing the removal of the negatively charged PS nano/microparticles by electrostatic attraction. The combination of the photocatalytic process and the physical adsorption permitted a complete removal of PS nano/microparticles after only 90 min as well as a high mineralization of by-products (≈95.5% as confirmed by the total organic carbon measurements). We estimate that ≈23.6% of the PS nano/microparticles were eliminated by photocatalysis and the rest of PS particles (≈76.4%) by physical adsorption. An outstanding adsorption capacity of 195.5 mg g-1 was obtained after the magnetic separation of the BiFO microparticles from the water. Hence, the results of this research demonstrated that using photocatalysis + physical-adsorption is a feasible strategy to quickly remove microplastic contaminants from the water.

An eco-friendly cellulose support functionalized with tin titanate nanoparticles for the fast removal of clonazepam drug from the drinking water: adsorption mechanisms

This research studied the performance of tin titanate (SnTiO₃, SnT) and cellulose-based composites for the removal of clonazepam (CZP) drug by physical adsorption. The cellulose was extracted from a plant named tithonia tubaeformis, which is considered as weed in the crop fields of Mexico. The analysis by microscopy revealed that the SnTiO₃ powders are formed by a mixture of coalesced grains and nanotubes with lengths in the range of 97-633 nm. Furthermore, the X-ray diffraction analysis indicated that the SnT powders present a mixture of cassiterite and rutile phases. Experiments for the CZP removal from drinking water were carried out, and several parameters such as initial drug concentration (1-10 mg/L), amount of SnT adsorbent per liter of contaminated solution (10-50 mg/L), and pH (3-10) were varied in order to study their influence on the CZP removal percentage. Essentially, we found that the SnT dosage of 50 mg/L produced the most efficient and fastest CZP removal, since 94.3% of CZP was removed after only 10 min of reaction. Moreover, a piece of cellulose (Cell) was decorated with 50 mg of SnT powder to form the Cell+SnT composite, and this was able to remove a maximum of 80.5% of CZP after 180 min of reaction. If the amount of SnT powder deposited on the Cell+SnT composite is raised up to 100 mg, the composite can remove 95.5% of CZP. The adsorption capacity was also calculated for the SnT powders and Cell+SnT composite and found that it was 6.3 times higher for the SnT powders. Furthermore, the Raman spectra recorded for the Cell+SnT composites demonstrated the presence of surface defects, which acted as adsorption centers for the CZP molecules. The results of this investigation demonstrate that eco-friendly and low-cost floatable composites can be used for the removal of pharmaceutical contaminants, which is an advantage over adsorbent powders.

Highly efficient Cd(Ⅱ) removal using 3D N-doped carbon derived from MOFs: Performance and mechanisms

Cadmium (Cd) removal is imperative to ensure the safety of aquatic-ecosystem, yet its effective removal technology has remained elusive by far. To address this concern, three-dimensional N-doped carbon (NC) polyhedrons affording ample porosity is fabricated based upon the thermal carbonization and KOH activation of zeolitic imidazolate framework-8 (ZIF-8) precursor. Thus-derived activated NC (a-NC) adsorbent not only overcomes the inherent instability of ZIF-8 but also harvests a maximum Cd(Ⅱ) adsorption capacity of 370.2 mg g^-1, which evidently surpasses those of bare NC counterpart as well as previously reported adsorbents. Impressively, a-NC achieves ca. 100% removal of aqueous Cd(Ⅱ) in a broad working pH range (5-9), and particularly attains stable performances (81-92%) in various realistic water. Theoretical calculations in combination with experimental characterizations further offer mechanistic insight into the enhanced removal exerted by a-NC. Notably, owing to the increased specific surface area (3041 vs. 389 m² g^-1) and enhanced sp² carbon content (91.7 vs. 68.8%) of a-NC as compared to NC, advanced Cd(Ⅱ) adsorption via a-NC can be exhibited. Our designed a-NC material harnessing favorable recycling capability would be in particular attractive in the realm of practical Cd(Ⅱ) remediation.

A sustainable and green chlorophyll/TiO2:W composite supported on recycled plastic bottle caps for the complete removal of Rhodamine B contaminant from drinking water

This investigation reports the photocatalytic performance of the tungsten doped titania (TiO₂:W or TW) with and without coating of chlorophyll (Chl) for the removal of the RhB dye from the drinking water. These particles were also supported on recycled plastic bottle caps (Bcap) to form other photocatalytic composites (TW/Bcap and TW + Chl/Bcap). The SEM images demonstrated that the TW particles without Chl had irregular shapes and sizes of 0.8-12 μm. The TW particles coated by the Chl presented shapes of quasi-rounded grains and smaller particle sizes of 0.8-1.8 μm. The photocatalytyic experiments showed that the photocatalyst powders containing Chl removed completely the RhB dye from the water after 2h under UV-VIS light, while the photocatalyst without Chl removed a maximum of 95% of the RhB. Interestingly, the TW/Bcap and TW + Chl/Bcap composites removed 94-100% of the RhB after 2h. Those ones removed such dye by photocatalysis and by physical adsorption at the same time (as confirmed by the absorbance and FTIR measurements), therefore, the removal of RhB was still very high. Scavenger experiments were also achieved and found that the •OH radicals are the main oxidizing species generated by the photocatalysts with and without Chl. The •O₂^- radicals and holes (h⁺) were the secondary oxidizing species. The presence of the chlorophyll on the photocatalyst increased in general the light absorption and the photocurrent. Overall, our work demonstrated that making composites with recycled plastic bottle caps is a feasible alternative to remove dyes from contaminated drinking water with high efficiency and low cost.

Low-temperature Hg0 abatement by ionic liquid based on weak interaction

Low-temperature gaseous elemental mercury (Hg⁰) abatement is an objective demand in industrial flue gas treatment. In this work, we proposed a new approach for Hg⁰ capture via weak interaction of ionic liquids. Ionic liquids with varied anions (1-butyl-3-methylimidazolium thioacetate ([Bmim][ThAc]), 1-butyl-3-methylimidazolium diethyldithiocarbamate ([Bmim][DTCR]), and 1-butyl-3-methylimidazolium ethylxanthate ([Bmim][EX])) were designed and synthesized. The interaction energies between ionic liquids and elemental mercury were proved to be positively related to mercury removal efficiency, revealing that the electrostatic interaction derived physical adsorption from anions is the dominant factor affecting mercury removal performance. [Bmim][ThAc] with the largest anionic electrostatic interaction energy showed the best mercury abatement performance, achieving a Hg⁰ removal efficiency of over 98% and an adsorption capacity of 10.66 mg/g at 50 °C. The influence of temperature and the results of mercury temperature-programmed desorption (Hg-TPD), X-ray photoelectron spectroscopy (XPS) further confirmed that the ionic liquid combines with elemental mercury through physical adsorption. The work provides a new perspective on designing high-efficiency sorbents for mercury removal at low temperature.

Characterization of free and immobilized lipase from Penicillium sp. onto three modified bentonites: A comparative study

The present work was conducted to investigate the immobilization of lipase from Penicillium sp. onto three modified bentonites by simple adsorption and crosslinking methods. The composites were characterized by FTIR, SEM and BET. The free and bentonite-supported lipase was evaluated in terms of operational and storage stability and pH and thermal activity and stability. The kinetic parameters were also evaluated. The results show that all immobilized enzymes had better thermal and pH stability compared to free enzymes. Among the immobilized enzymes, GDU-bent-lipase had more efficient performance in thermal (38% of its initial activity within 24 h at 65 °C), operational (70% residual activity after 9 cycles), storage stability (70.14% of its initial activities at 4 °C for 21 days), and kinetic properties (effectiveness factor 0.79 relative to free enzyme) than free and other immobilized enzymes. The adsorption isotherm was modeled by Langmuir, Freundlich and Temkin isotherms which Langmuir isotherm indicated a better fit of the experimental adsorption data. To the best of our knowledge, this is the first comparative report about the immobilization of lipase Produced by Penicillium sp., isolated from olive mill wastewater, and the most comprehensive study about the immobilization of lipase onto several supports.

Condensation and adsorption characteristics of gaseous selenium on coal-fired fly ash at low temperatures

Gaseous selenium is of high saturated vapor pressure, making its retention in solid phases quite difficult during coal combustion. The selenium transformation from gaseous form into solid phases at low temperatures can be essential to control selenium emission. To understand the migration of SeO₂ (g) on ash particles in the low-temperature zone, this study investigated the speciation of selenium in fly ash and simulated the physical retention of SeO₂ (g) on fly ash. The results demonstrated that there was a large proportion of physically-bound Se in the fly ash of pulverized-coal-fired boiler (22.62 %-58.03%), while the content of physically-bound Se in fly ash of circulated fluidized-bed boiler was lower (∼6%). The physically-bound Se was formed through selenium condensation and physical adsorption. The decrease of temperature or the increase of cooling rate could promote the transformation of gaseous selenium to solid phase and the presence of HCl might suppress SeO₂ transformation into Se in the condensation process. Meanwhile the compositions of fly ash had a great influence on the selenium adsorption process. Among typical coal-fired ash components, mullite showed the best performance in the selenium capture in the temperature range of 90-200 °C, contributing to the high content of physically-adsorbed selenium in PC fly ash. These findings provided new ideas for improving the removal rate of volatile selenium.

Detection of 1,1 dimethylhydrazine by graphene oxide: first principles study

The surface of graphene oxide (GO) with different oxidation levels is widely used in gas sensing applications. 1,1-Dimethylhydrazine (unsymmetrical dimethylhydrazine, UDMH) as a highly toxic and volatile pollution gas has long been investigated and discussed. The research reported here examined the stable structure of GO surface by first principles calculation. Furthermore, the adsorption mechanism of UDMH on the stable GO surface was explored and the optimal adsorption distance and upper limit of adsorption quantity were determined with their adsorption energy calculated. The results reveal that the hydroxyl group on GO did a great service to the UDMH adsorption and the UDMH tends to approach GO from the direction of -NH₂, with distance being 2.9 Å.

Theoretical study of small aromatic molecules adsorbed in pristine and functionalised graphene

Small aromatic molecules are precursors for several biological systems such as DNA, proteins, drugs, and are also present in several pollutants. The understanding of the interaction of these small aromatic molecules with pristine and functionalised graphene (fGr) can generate different applications. We performed ab initio simulations based on the density functional theory to evaluate the interaction between the aromatic compounds, benzene, benzoic acid, aniline and phenol, with pristine and fGr. The results show that the binding energy for all cases is less than 103.24 kJ/mol (1.07 eV) without substantial modification of the electronic properties, indicating that the interaction occurs through a physical adsorption regime. The results are promising because they suggest that pristine graphene and functionalised graphene are suitable for removing these pollutants, or for carrying molecules for biological applications influenced by π-π and H-bonds interaction.

Covalent organic frameworks as emerging host platforms for enzyme immobilization and robust biocatalysis - A review

In recent years, the synthesis and application of green and sustainable products have become global ecological and societal issues. Based on the principles of green chemistry, the application of different biocatalysts not only produce target products and decreases side effects but also enhances the selectivity and activity. Enzyme-based biocatalysts are very interesting due to their high catalytic performance, eco-friendly reaction systems, and selectivity. Immobilization is demonstrated as a favorable approach to improve the stability and recyclability of enzymes. Among different supports, porous and crystalline materials, covalent organic frameworks (COFs), represent an interesting class of support matrices for the immobilization of different enzymes. Owing to tunable physicochemical characteristics, a high degree of crystallinity, large specific surface area, superior adsorption capacity, pre-designable structure and marked stability, COFs might consider as perfect host materials for improving the desirable properties of enzymes, such as poor stability, low operational range, lack of repeatability, and products/by-products inhibition for large-scale applications. The enzyme-incorporated COFs have emerged as one of the hopeful ways to constitute tailor-made biocatalytic systems, which can be employed in an array of reactions. Highly porous nature of many COFs led to increased process output in contrast to other micro/nanoparticles. The enzymes can be integrated into COFs through different techniques, including physical adsorption and direct covalent attachment between the enzyme molecules and COFs or through a cross-linking agent. Herein, we discuss and highlight the synthesis methods, properties, and functionalization of COFs and the recent literature for the application of these materials in enzymes immobilization. Main approaches for immobilization of enzymes into COFs and the catalytic applications of these materials are also presented. This study offers new avenues to address the limitations of traditional enzyme immobilization supports as well as delivers new possibilities to construct smart biocatalytic systems for diverse biotechnological applications.

Mass transfer process and separation mechanism of four 5'-ribonucleotides on a strong acid cation exchange resin

5'-ribonucleotides including adenosine 5'-monophosphate (AMP), cytidine 5'-monophsphate (CMP), guanosine 5'-monophosphate (GMP) and uridine 5'-monophosphate (UMP) have been widely used in the food and pharmaceutical industries. This work focused on the assessment of mass transfer process and separation mechanism of four 5'-ribonucleotides and counter-ion Na⁺ on the strong cation exchange resin NH-1. The intraparticle diffusion was determined as the rate-limiting step for the mass transfer of AMP, CMP, GMP, and Na⁺ on the resin NH-1 through the Boyd model. Meanwhile, a homogeneous surface diffusion model (HSDM) combing ion exchange and physical adsorption was proposed and tested against adsorption kinetic data in the batch adsorption systems. The fixed-bed film-surface diffusion model based on the HSDM was then developed and successfully predicted the concentration profiles of 5'-ribonucleotides and the change of pH at the outlet of the fixed-bed in the dynamic adsorption and separation process. Finally, the separation mechanism of 5'-ribonucleotides was presented combining model prediction and experimental results. The separation of UMP, GMP and CMP were mainly based on their differences in isoelectric points, while that of AMP and CMP were lied with the discrepancy of their physical adsorption binding capacity with the resin NH-1.

CO2 capture through electro-conductive adsorbent using physical adsorption system for sustainable development

The most critical energy and environmental challenge that our planet is facing today is to minimize the dependence on fossil fuels. Carbon dioxide may be of utmost significance as a solution of this issue through realization of carbon neutral energy cycle. Potentially, this could be achieved through the carbon dioxide capture as the urgent response to ongoing climate change. Activated carbon (AC) adsorption is one the most effective, environment friendly and techno-economic process for the carbon capture. In the current research, an electro-conductive-activated carbon was prepared by mixing powdered activated carbon (PAC) with an electro-conductive polymer (ECP). Different ratios of 0, 25, 50, 75 and 100 wt% of ECP with PAC were used for the different analyses of activated carbons in a gas mixture of CO₂/N₂ using a physical adsorption system. Adsorption and desorption analyses, capacities of the process and desorption effects were examined. Electro-conductive polymers (ECP) were mixed with AC samples, where breakthrough time was increased up to 400% when mixed with the PAC for CO₂ adsorption. Following adsorption analysis, desorption of activated carbons was conducted with different potentials. It was revealed that mixing could help the PAC sample to overcome the packing issue to increase the breakthrough capacity and the volumes before and after the breakthrough adsorption in the packed bed systems. The desorption rates of the PAC sample were also enhanced, and fast desorption was observed when mixed with ECP. It is envisioned that this method is very much promising carbon capture method for the techno-economic feasibility and sustainable development of the environment.

Immobilization of laccase onto meso-MIL-53(Al) via physical adsorption for the catalytic conversion of triclosan

Due to the abundant binding sites and high stability, a synthesized meso-MIL-53(Al) was selected as the backbone and used for immobilizing laccase (Lac-MIL-53(Al)) to catalytically degrade of TCS. XRD, BET and FTIR analyses proved that the carboxyl groups on PTA of meso-MIL-53(Al) could provide sufficient adsorption sites for physically immobilizing laccase through hydrogen bonds and electrostatic interactions. Although the catalytic efficiency of V_max/K_m slightly decreased from 785 to 607 min^-1 due to the mass transfer limitation upon immobilized, Lac-MIL-53(Al) showed high activity recovery (93.8%) and stability. The conformational analysis indicated the laccase could partially enter into the MOF by conformational changes without impairing laccase, although the laccase molecular (6.5 nm × 5.5 nm × 4.5 nm) was larger than the mesopore sizes of the MOF (4 nm). The kinetics indicated that Lac-MIL-53(Al) could remove 99.24% of TCS within 120 min due to the synergy effect of the adsorption of meso-MIL-53(Al) and catalytic degradation of laccase. Meanwhile, Lac-MIL-53(Al) could remain approximately 60% of activity for up to 8 times reuse without desorption. The GC/MS and LC/MS/MS analyses further confirmed that TCS could be transformed to 2, 4-DCP by laccase via the breakage of the ether bond, or to passivated dimers, trimers and tetramers by the self-coupling and oxidization of the phenoxyl radicals, and finally removed by precipitation. In summary, enzyme-MOF composite might be a potential strategy to control the micropollutants in the wastewater.

Influences of fine-grained NaCl particles on performance and denitration efficiency of activated carbon during sintering flue gas purification process

Alkali metal chlorides emitted from sintering flue gas are easily adsorbed on the surface of activated carbon (AC) in the purification process. In this paper, NaCl particles adsorbing onto AC were simulated by impregnation method, and the size and morphology of NaCl particles were similar to those of NaCl-PM₁₀ emitted from sintering flue gas. With the adsorption of NaCl particles, 2-10-μm pores of AC were filled, and the specific surface area of AC decreased. But NaCl led to the increase of acidic functional groups on the surface of AC. When 0.75 wt% NaCl was adsorbed, it was beneficial for AC catalytic denitration (de-NOx), because the chemical reaction was strengthened by acidic functional groups, so it showed a certain promotion of de-NOx efficiency. As 1.5 wt% NaCl and 3 wt% NaCl were adsorbed, NaCl had an inhibitory effect on AC de-NOx, which was because the specific surface area of AC decreased, and the prevention of physical adsorption played a major role. As a result, the de-NOx efficiency of AC adsorbed with 3 wt% NaCl decreased from 40.59 to 23.02% at 150 °C. Therefore, the absorption of NaCl fine particles on AC should not exceed 0.75 wt%.

Physical adsorption of patulin by Saccharomyces cerevisiae during fermentation

Patulin (PAT), a mycotoxin mainly produced by various species of fungi, is frequently detected in moldy fruit- and vegetable-based products, which pose a health risk to the consumer. Over the past decades, a few studies reported that PAT content could be significantly decreased by microbial fermentation process. However, the physical adsorption mechanism between PAT and yeast during fermentation is still unclear. In this paper, we focused on the physical adsorption of PAT by Saccharomyces cerevisiae CCTCC 93161 during fermentation in aqueous solutions. Firstly, morphology of differently treated yeast cells were analyzed by scanning electron microscope, then the interactions between PAT and yeast cells were investigated by infrared absorption spectra of differently treated S. Cerevisiae cells before and after the adsorption of PAT. The results showed that the efficiency of PAT removal raised significantly with the increase of fermentation temperature and time, whereas it decreased significantly with the increase of initial PAT concentration in the fermentation system. The proteins and polysaccharides in the cell walls of yeast interacted with PAT and accounted for the physical adsorption. The current work would possibly provide some new insights on PAT control for fermented foods.

Chemical and Biochemical Approach to Make a Perfect Biocatalytic System on Carbonaceous Matrices

Enzymatic processes are widely used in food industry, pharmacy, cosmetic and household chemistry, and medicine. However, the common and efficient application of the biological catalysts is limited by a number of factors that influence enzymes activity. One of the most frequent methods to improve the biocatalysts' properties is immobilization. This chapter presents a recent overview of our attempts to obtain the perfect biocatalytic system. The experimental approach, proposed in this chapter, includes the critical points like: the choice of adequate immobilization method, most suitable carrier, determination of enzyme kinetic parameters, stability, and toxicity of obtained systems. As carbon materials including graphene-derived materials offer unique properties and a plenty of different modifications, these parameters seem to be of decisive importance to understand chemistry of complex systems. Consideration of all the mentioned requirements lead us to the conclusion that graphene oxide could be the best candidate for support in perfect biocatalytic systems.

In-situ regeneration of activated carbon with electric potential swing desorption (EPSD) for the H2S removal from biogas

In-situ regeneration of a granular activated carbon was conducted for the first time using electric potential swing desorption (EPSD) with potentials up to 30 V. The EPSD system was compared against a standard non-potential system using a fixed-bed reactor with a bed of 10 g of activated carbon treating a gas mixture with 10,000 ppm H₂S. Breakthrough times, adsorption desorption volume, capacities, effect of regeneration and desorption kinetics were investigated. The analysis showed that desorption of H₂S using the new EPSD system was 3 times quicker compared with the no potential system. Hence, physical adsorption using EPSD over activated carbon is efficient, safe and environmental friendly and could be used for the in-situ regeneration of granular activated carbon without using a PSA and/or TSA system. Additionally, adsorption and desorption cycles can be obtained with a classical two column system, which could lead towards a more efficient and economic biogas to biomethane process.

Tyrosinase immobilization on aminated magnetic nanoparticles by physical adsorption combined with covalent crosslinking with improved catalytic activity, reusability and storage stability

In the present study, the immobilization method of physical adsorption combined with covalent crosslinking was developed to avoid the shortcomings of both the noncovalent and covalent coupling methods. For the first time, tyrosinase (TYR) was immobilized on the surface of aminated magnetic nanoparticles (Fe₃O₄-NH₂) by the developed method. TYR was firstly adsorbed on the surface of Fe₃O₄-NH₂ by electrostatic interaction, and then by covalent crosslinking with glutaraldehyde (GA), TYR was firmly immobilized on the supports. The immobilized TYR showed enhanced pH and temperature endurances at the optimum pH of 7.0 and temperature of 35 °C. TYR reusability was significantly improved after immobilization and it retained 61.4 ± 2.3% of its initial activity after 5 repeated cycles. Immobilized TYR also showed improved storage stability (73.2 ± 1.1% after 30 days of storage at 4 °C). In addition, the immobilized TYR showed a higher biological affinity to substrate owing to the stabilization of TYR in its active conformation by electrostatic interaction prior to covalent crosslinking. Finally, the immobilized TYR was used to screen of enzyme inhibitors from 11 traditional Chinese medicines (TCMs) to validate whether this method can be used for enzyme inhibitor screening or not.

Site-selective orientated immobilization of antibodies and conjugates for immunodiagnostics development

Immobilized antibody systems are the key to develop efficient diagnostics and separations tools. In the last decade, developments in the field of biomolecular engineering and crosslinker chemistry have greatly influenced the development of this field. With all these new approaches at our disposal, several new immobilization methods have been created to address the main challenges associated with immobilized antibodies. Few of these challenges that we have discussed in this review are mainly associated to the site-specific immobilization, appropriate orientation, and activity retention. We have discussed the effect of antibody immobilization approaches on the parameters on the performance of an immunoassay.

Selective sensing of ozone and the chemically active gaseous species of the troposphere by using the C20 fullerene and graphene segment

OZONE is a key species in forming a layer in the atmosphere of earth that brings vita for our planet and supports the complex life. This three-atom molecule in the ozone-layer, is healing the earth's ecosystem by protecting it from dangerous rays of the sun. Until this molecule is in the stratosphere, it would support the natural order of the life; but, when it appears in our environment, damages will begin against us. In this project, we have tried to find a new way for beaconing ozone species in our environment via physical adsorption by the C₂₀ fullerene and graphene segment as a sensor. To find the selectivity of this nano-sized segment in sensing ozone (O₃), compared to the usual chemically active gasses of the troposphere like O₂, N₂, CO₂, H₂O, CH₄, H₂, and CO, the density of state (DOS) plots were analyzed, for each interacting species. The results showed that ozone could significantly change the electrical conductivity of C₂₀ fullerene, for each adsorption step. Thus, this fullerene could clearly sense ozone in different adsorption steps; while, the graphene segment could do this only at the second step adsorption (/ΔE_g-B/=0.016eV) (at the first adsorption step the /ΔE_g-A/ is 0.00eV).

Noncovalent and covalent immobilization of oxygenase on single-walled carbon nanotube for enzymatic decomposition of aromatic hydrocarbon intermediates

The decomposition of various aromatic hydrocarbon intermediates was examined using a recombinant oxidative enzyme immobilized on single-walled carbon nanotubes (SWCNTs). Hydroxyquinol 1,2-dioxygenase (CphA-I), which catalyzes ring cleavage of catechol and its analogues, was obtained from Arthrobacter chlorophenolicus A6 via cloning, overexpression, and subsequent purification. This recombinant enzyme was immobilized on SWCNTs by physical adsorption and covalent coupling in the absence and presence of N-hydroxysuccinimide. The immobilization yield was as high as 52.1%, and a high level of enzyme activity of up to 64.7% was preserved after immobilization. Kinetic analysis showed that the substrate utilization rates (vmax) and catalytic efficiencies (kcat/KM) of the immobilized enzyme for all substrates evaluated were similar to those of the free enzyme, indicating minimal loss of enzyme activity during immobilization. The immobilized enzyme was more stable toward extreme pH, temperature, and ionic strength conditions than the free enzyme. Thus, the oxidative enzyme immobilized on SWCNTs can be used as an effective and stable biocatalyst for the biochemical remediation process if further investigations would be carried out under field conditions.

Comparative study of antibody immobilization mediated by lipid and polymer fibers

Antibody immobilization and function retention are important to a variety of applications, including proteomics, drug discovery, diagnostics, and biosensors. The present study investigates antibody immobilization mediated by cholesteryl succinyl silane (CSS) fibers, in comparison to hydrophobic polycaprolactone (PCL) fibers and hydrophilic plasma-treated PCL fibers. When incubated with a model protein, the formation of protein aggregates is observed on hydrophobic PCL fibers but not on the more hydrophobic CSS fibers, indicating that CSS fibers immobilize proteins through mechanisms other than hydrophobic interaction. When exposed to a limited amount of antibody, CSS fibers immobilize more antibodies than plasma-treated PCL fibers and no fewer antibodies than PCL fibers. The function retention of antibodies immobilized on the fibers is analyzed using a cell-capture assay, which shows that the antibody-functionalized CSS fibrous matrices capture 6- or 7-fold more cells than the antibody-functionalized PCL or plasma-treated PCL fibrous matrices, respectively. Data collected from the study show that the lipid fiber-mediated immobilization of antibody not only maintains the advantages of physical immobilization such as easiness and rapidness of operation but also improves function retention.

A comparative study of different protein immobilization methods for the construction of an efficient nano-structured lactate oxidase-SWCNT-biosensor

We constructed lactate biosensors by immobilization of lactate oxidase (LOx) onto a single-walled carbon nanotube (SWCNT) electrode. The first step of the sensor construction was the immobilization of oxidized SWCNT onto a platinum electrode modified with 4-aminothiophenol (4-ATP). Two enzyme immobilization methods were used to construct the biosensors, i.e., covalent immobilization using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) and physical adsorption. Atomic force microscopy (AFM) experiments confirmed the immobilization of SWCNT during the biosensor construction and X-ray photoelectron spectroscopy (XPS) experiments confirmed covalent immobilization of LOx onto the SWCNT in the first method. The biosensor based on covalent enzyme immobilization showed a sensitivity of 5.8 μA/mM, a linearity up to 0.12 mM of L-lactate, and a detection limit of 4.0 μM. The biosensor based on protein adsorption displayed a sensitivity of 9.4 μA/mM, retaining linearity up to 0.18 mM of L-lactate with a detection limit of 3.0 μM. The difference in the biosensor response can be attributed to protein conformational or dynamical changes during covalent immobilization. The stability of the biosensors was tested at different temperatures and after different storage periods. The thermostability of the biosensors after incubation at 60 °C demonstrated that the biosensor with covalently immobilized LOx retained a higher response compared with the adsorbed protein. Long-term stability experiments show a better residual activity of 40% for the covalently immobilized protein compared to 20% of residual activity for the adsorbed protein after 25 d storage. Covalent protein immobilization was superior compared to adsorption in preserving biosensor functionality over extended time period.

Physical stability of arginine-glycine-aspartic acid peptide coated on anodized implants after installation

PURPOSE

The aim of this study was to evaluate the stability of arginine-glycine-aspartic acid (RGD) peptide coatings on implants by measuring the amount of peptide remaining after installation.

MATERIALS AND METHODS

Fluorescent isothiocyanate (FITC)-fixed RGD peptide was coated onto anodized titanium implants (width 4 mm, length 10 mm) using a physical adsorption method (P) or a chemical grafting method (C). Solid Rigid Polyurethane Foam (SRPF) was classified as either hard bone (H) or soft bone (S) according to its density. Two pieces of artificial bone were fixed in a customized jig, and coated implants were installed at the center of the boundary between two pieces of artificial bone. The test groups were classified as: P-H, P-S, C-H, or C-S. After each installation, implants were removed from the SRPF, and the residual amounts and rates of RGD peptide in implants were measured by fluorescence spectrometry. The Kruskal-Wallis test was used for the statistical analysis (α=0.05).

RESULTS

Peptide-coating was identified by fluorescence microscopy and XPS. Total coating amount was higher for physical adsorption than chemical grafting. The residual rate of peptide was significantly larger in the P-S group than in the other three groups (P<.05).

CONCLUSION

The result of this study suggests that coating doses depend on coating method. Residual amounts of RGD peptide were greater for the physical adsorption method than the chemical grafting method.