Fine mapping of a major locus controlling plant height using a high-density single-nucleotide polymorphism map in Brassica napus

Analysis of the Candidate Genes and Underlying Molecular Mechanism of P198, an RNAi-Related Dwarf and Sterile Line

The genome-wide long hairpin RNA interference (lhRNAi) library is an important resource for plant gene function research. Molecularly characterizing lhRNAi mutant lines is crucial for identifying candidate genes associated with corresponding phenotypes. In this study, a dwarf and sterile line named P198 was screened from the Brassica napus (B. napus) RNAi library. Three different methods confirmed that eight copies of T-DNA are present in the P198 genome. However, only four insertion positions were identified in three chromosomes using fusion primer and nested integrated polymerase chain reaction. Therefore, the T-DNA insertion sites and copy number were further investigated using Oxford Nanopore Technologies (ONT) sequencing, and it was found that at least seven copies of T-DNA were inserted into three insertion sites. Based on the obtained T-DNA insertion sites and hairpin RNA (hpRNA) cassette sequences, three candidate genes related to the P198 phenotype were identified. Furthermore, the potential differentially expressed genes and pathways involved in the dwarfism and sterility phenotype of P198 were investigated by RNA-seq. These results demonstrate the advantage of applying ONT sequencing to investigate the molecular characteristics of transgenic lines and expand our understanding of the complex molecular mechanism of dwarfism and male sterility in B. napus.

BnPLP1 Positively Regulates Flowering Time, Plant Height, and Main Inflorescence Length in Brassica napus

Protein prenylation mediated by the Arabidopsis thaliana PLURIPETALA (AtPLP) gene plays a crucial role in plant growth, development, and environmental response by adding a 15-carbon farnesyl group or one to two 20-carbon geranylgeranyl groups onto one to two cysteine residues at the C-terminus of the target protein. However, the homologous genes and their functions of AtPLP in rapeseed are unclear. In this study, bioinformatics analysis and gene cloning demonstrated the existence of two homologous genes of AtPLP in the Brassica napus L. genome, namely, BnPLP1 and BnPLP2. Evolutionary analysis revealed that BnPLP1 originated from the B. rapa L. genome, while BnPLP2 originated from the B. oleracea L. genome. Genetic transformation analysis revealed that the overexpression of BnPLP1 in Arabidopsis plants exhibited earlier flowering initiation, a prolonged flowering period, increased plant height, and longer main inflorescence length compared to the wild type. Contrarily, the downregulation of BnPLP1 expression in B. napus plants led to delayed flowering initiation, shortened flowering period, decreased plant height, and reduced main inflorescence length compared to the wild type. These findings indicate that the BnPLP1 gene positively regulates flowering time, plant height, and main inflorescence length. This provides a new gene for the genetic improvement of flowering time and plant architecture in rapeseed.

Integrating transcriptome and phytohormones analysis provided insights into plant height development in sesame

Plant height is a key agronomic trait influencing crops yield. The height of sesame plants is important for yield performance, lodging resistance and plant architecture. Although plant height is significantly distinct among sesame varieties, the genetic basis of plant height remains largely unknown. In this study, in order to tackle genetic insights into the sesame plant height development, a comprehensive transcriptome analysis was conducted using the stem tips from two sesame varieties with distinct plant height, Zhongzhi13 and ZZM2748, at five time points by BGI MGIseq2000 sequencing platform. A total of 16,952 genes were differentially expressed between Zhongzhi13 and ZZM2748 at five time points. KEGG and MapMan enrichment analyses and quantitative analysis of phytohormones indicated that hormones biosynthesis and signaling pathways were associated with sesame plant height development. Plenty of candidate genes involved in biosynthesis and signaling of brassinosteroid (BR), cytokinin (CK) and gibberellin (GA) which were major differential hormones between two varieties were identified, suggesting their critical roles in plant height regulation. WGCNA revealed a module which was significantly positively associated with the plant height trait and founded SiSCL9 was the hub gene involved in plant height development in our network. Further overexpression in transgenic Arabidopsis validated the function of SiSCL9 in the increase of plant height by 26.86%. Collectively, these results increase our understanding of the regulatory network controlling the development of plant height and provide a valuable genetic resource for improvement of plant architecture in sesame.

Inheritance of dwarfism and narrow lobed-leaf in two rapeseed (Brassica napus L.) mutant lines

There is a need for dwarf and narrow lobed-leaves rapeseed cultivars to reduce transpiration under drought prone areas. A dwarf mutant line 'H2M-1' and a mutant with reduced lobed-leaf 'H2M-2' were developed. To exploit these mutated traits properly in an effective breeding program, one should understand their mode of inheritance. There are conflicting findings for plant dwarfism and limited studies for leaf size in mutant genetic backgrounds. Therefore, the objective of this study was to investigate the inheritance of dwarfism and narrow lobed-leaf mutated traits. Plants of the wild-type variety 'INRA-CZH2' were reciprocally crossed with plants of the line 'H2M-1' and plants of the line 'H2M-2'. A genetic study was conducted by analyzing segregation of mutated traits in F₁, F₂ and BC₁F₁ generations. The results revealed that two recessive genes with dominant epistasis action controlled the heredity of plant height in the dwarf line, whereas only a single recessive gene is involved in determining reduced lobed-leaf in the line H2M-2. Thus, there is a possibility to easily and quickly transfer these characters into rapeseed breeding germplasm or varieties towards the development of suitable cultivars for areas marked by increasing drought stress.

Genome-wide association study reveals a GLYCOGEN SYNTHASE KINASE 3 gene regulating plant height in Brassica napus

Rapeseed (Brassica napus) is an allotetraploid crop that is the main source of edible oils and feed proteins in the world. The ideal plant architecture breeding is a major objective of rapeseed breeding and determining the appropriate plant height is a key element of the ideal plant architecture. Therefore, this study aims to improve the understanding of the genetic controls underlying plant height. The plant heights of 230 rapeseed accessions collected worldwide were investigated in field experiments over two consecutive years in Wuhan, China. Whole-genome resequencing of these accessions yielded a total of 1,707,194 informative single nucleotide polymorphisms (SNPs) that were used for genome-wide association analysis (GWAS). GWAS and haplotype analysis showed that BnaA01g09530D, which encodes BRASSINOSTEROID-INSENSITIVE 2 and belongs to the GLYCOGEN SYNTHASE KINASE 3 (GSK3) family, was significantly associated with plant height in B. napus. Moreover, a total of 31 BnGSK3s with complete domains were identified from B. napus genome and clustered into four groups according to phylogenetic analysis, gene structure, and motif distribution. The expression patterns showed that BnGSK3s exhibited significant differences in 13 developmental tissues in B. napus, suggesting that BnGSK3s may be involved in tissue-specific development. Sixteen BnGSK3 genes were highly expressed the in shoot apical meristem, which may be related to plant height or architecture development. These results are important for providing new haplotypes of plant height in B. napus and for extending valuable genetic information for rapeseed genetic improvement of plant architecture.

A small chromosomal inversion mediated by MITE transposons confers cleistogamy in Brassica napus

Cleistogamy, self-pollination within closed flowers, can help maintain seed purity, accelerate breeding speed, and aid in the development of ornamental flowers. However, the mechanism underlying petal closing/opening behavior remains elusive. Here, we found that a Brassica napus petal closing/opening behavior was inherited in a Mendelian manner. Fine mapping and positional cloning experiments revealed that the Mendelian factor originated from a short (29.8 kb) inversion mediated by BnDTH9 miniature inverted-repeat transposable elements (MITEs) on chromosome C03. This inversion led to tissue-specific gene promoter exchange between BnaC03.FBA (BnaC03G0156800ZS encoding an F-Box-associated domain-containing protein) and BnaC03.EFO1 (BnaC03G0157400ZS encoding an EARLY FLOWERING BY OVEREXPRESSION 1 protein) positioned near the respective inversion breakpoints. Our genetic transformation work demonstrated that the cleistogamy originated from high tissue-specific expression of the BnaC03.FBA gene caused by promoter changes due to the MITE-mediated inversion. BnaC03.FBA is involved in the formation of an SCF (Skp1-Cullin-F-box) complex, which participates in ubiquitin-mediated protein targeting for degradation through the ubiquitin 26S-proteasome system. Our results shed light on a molecular model of petal-closing behavior.

Prioritized candidate causal haplotype blocks in plant genome-wide association studies

Genome wide association studies (GWAS) can play an essential role in understanding genetic basis of complex traits in plants and animals. Conventional SNP-based linear mixed models (LMM) that marginally test single nucleotide polymorphisms (SNPs) have successfully identified many loci with major and minor effects in many GWAS. In plant, the relatively small population size in GWAS and the high genetic diversity found in many plant species can impede mapping efforts on complex traits. Here we present a novel haplotype-based trait fine-mapping framework, HapFM, to supplement current GWAS methods. HapFM uses genotype data to partition the genome into haplotype blocks, identifies haplotype clusters within each block, and then performs genome-wide haplotype fine-mapping to prioritize the candidate causal haplotype blocks of trait. We benchmarked HapFM, GEMMA, BSLMM, GMMAT, and BLINK in both simulated and real plant GWAS datasets. HapFM consistently resulted in higher mapping power than the other GWAS methods in high polygenicity simulation setting. Moreover, it resulted in smaller mapping intervals, especially in regions of high LD, achieved by prioritizing small candidate causal blocks in the larger haplotype blocks. In the Arabidopsis flowering time (FT10) datasets, HapFM identified four novel loci compared to GEMMA’s results, and the average mapping interval of HapFM was 9.6 times smaller than that of GEMMA. In conclusion, HapFM is tailored for plant GWAS to result in high mapping power on complex traits and improved on mapping resolution to facilitate crop improvement.

Genome-wide association studies (GWAS) are commonly used in human and plant studies to identify genetic variants responsible for the phenotype of interest and provide foundations for studying disease mechanisms and crop improvement. Most GWAS models are developed and optimized using human datasets. However, the difference between human and plant datasets essentially limits their applications in plant studies, especially when mapping complex traits such as drought resistance and yield. In this study, we present a novel GWAS method, HapFM, tailored for plant datasets to overcome the difficulties of many conventional GWAS methods. HapFM resulted in higher statistical power than conventional GWAS methods for mapping complex traits in our simulation and real dataset analyses. In addition, HapFM reduced the mapping interval by prioritizing candidate causal regions in the genome, which benefits the downstream experimental studies. Last but not least, HapFM can incorporate biological annotations to increase statistical power further. Overall, HapFM balances statistical power, result interpretability, and downstream experimental verifiability.

Integrated genetic mapping and transcriptome analysis reveal the BnaA03.IAA7 protein regulates plant architecture and gibberellin signaling in Brassica napus L

A novel mutation in the BnaA03.IAA7 protein reduces plant height and enhances gibberellin signaling in Brassica napus L. Rapeseed (Brassica napus) is an excellent and important source for vegetable oil production, but its production is severely affected by lodging. Lodging hinders mechanization and decreases yield, and an ideal solution is semidwarf breeding. Limited by germplasm resources, semidwarf breeding developed slowly in rapeseed. In the current study, a mutant called sdA03 was isolated from EMS-mutagenized lines of Zhongshuang 11 (ZS11). The inheritance analysis showed that phenotypes of sdA03 were controlled by a single semidominant gene. Genetic mapping, RNA-seq and candidate gene analysis identified BnaA03.IAA7 as a candidate gene, and a function test confirmed that the mutated BnaA03.iaa7 regulates plant architecture in a dose-dependent manner. Yeast two-hybrid and transient expression experiments illustrated the P87L substitution in the GWPPV/I degron motif of BnaA03.iaa7 impaired the interaction between BnaA03.IAA7 and TIR1 proteins, and BnaA03.iaa7 prevented ARF from activating the auxin signaling pathway.The gibberellin (GA) content was higher in sdA03 hypocotyls than in those of ZS11. Further expression analysis showed more active gibberellin signaling in hypocotyl and richer expression of GA synthetic genes in root and cotyledon of sdA03 seedlings. Finally, a marker was developed based on the SNP found in BnaA03.iaa7 and used in molecular breeding. The study enriched our understanding of the architectural regulation of rapeseed and provided germplasm resources for breeding.

Identification and Fine Mapping of a Locus Related to Leaf Up-Curling Trait (Bnuc3) in Brassica napus

Leaf trait is an important target trait in crop breeding programs. Moderate leaf curling may be a help for improving crop yield by minimizing the shadowing by leaves. Mining locus for leaf curling trait is of significance for plant genetics and breeding researches. The present study identified a novel rapeseed accession with up-curling leaf, analyzed the up-curling leaf trait inheritance, and fine mapped the locus for up-curling leaf property (Bnuc3) in Brassica napus. Genetic analysis revealed that the up-curling leaf trait is controlled by a single dominant locus, named BnUC3. We performed an association study of BnUC3 with single nucleotide polymorphism (SNP) markers using a backcross population derived from the homozygous up-curling leaf line NJAU-M1295 and the canola variety ‘zhongshuang11’ with typical flat leaves, and mapped the BnUC3 locus in a 1.92 Mb interval of chromosome A02 of B. napus. To further map BnUC3, 232 simple sequence repeat (SSR) primers and four pairs of Insertion/Deletion (InDel) primers were developed for the mapping interval. Among them, five SSR markers and two InDel markers were polymorphic. By these markers, the mapping interval was narrowed to 92.0 kb using another F₂ population. This fine mapping interval has 11 annotated genes among which BnaA02T0157000ZS were inferred to be candidate casual genes for up-curling leaf based on the cloned sequence analysis, gene functionality, and gene expression analysis. The current study laid a foundational basis for further elucidating the mechanism of BnUC3 and breeding of variety with up-curling leaf.

Fine mapping of the BnaC04.BIL1 gene controlling plant height in Brassica napus L

BACKGROUND

Plant height is an important architecture trait which is a fundamental yield-determining trait in crops. Variety with dwarf or semi-dwarf phenotype is a major objective in the breeding because dwarfing architecture can help to increase harvest index, increase planting density, enhance lodging resistance, and thus be suitable for mechanization harvest. Although some germplasm or genes associated with dwarfing plant type have been carried out. The molecular mechanisms underlying dwarfism in oilseed rape (Brassica napus L.) are poorly understood, restricting the progress of breeding dwarf varieties in this species. Here, we report a new dwarf mutant Bndwarf2 from our B. napus germplasm. We studied its inheritance and mapped the dwarf locus BnDWARF2.

RESULTS

The inheritance analysis showed that the dwarfism phenotype was controlled by one semi-dominant gene, which was mapped in an interval of 787.88 kb on the C04 chromosome of B. napus by Illumina Brassica 60 K Bead Chip Array. To fine-map BnDWARF2, 318 simple sequence repeat (SSR) primers were designed to uniformly cover the mapping interval. Among them, 15 polymorphic primers that narrowed down the BnDWARF2 locus to 34.62 kb were detected using a F2:3 family population with 889 individuals. Protein sequence analysis showed that only BnaC04.BIL1 (BnaC04g41660D) had two amino acid residues substitutions (Thr187Ser and Gln399His) between ZS11 and Bndwarf2, which encoding a GLYCOGEN SYNTHASE KINASE 3 (GSK3-like). The quantitative real-time PCR (qRT-PCR) analysis showed that the BnaC04.BIL1 gene expressed in all tissues of oilseed rape. Subcellular localization experiment showed that BnaC04.BIL1 was localized in the nucleus in tobacco leaf cells. Genetic transformation experiments confirmed that the BnaC04.BIL1 is responsible for the plant dwarf phenotype in the Bndwarf2 mutants. Overexpression of BnaC04.BIL1 reduced plant height, but also resulted in compact plant architecture.

CONCLUSIONS

A dominant dwarfing gene, BnaC04.BIL1, encodes an GSK3-like that negatively regulates plant height, was mapped and isolated. Our identification of a distinct gene locus may help to improve lodging resistance in oilseed rape.

Mapping of a major QTL controlling plant height using a high-density genetic map and QTL-seq methods based on whole-genome resequencing in Brassica napus

Plant height is a crucial element related to plant architecture that influences the seed yield of oilseed rape (Brassica napus L.). In this study, we isolated a natural B. napus mutant, namely a semi-dwarf mutant (sdw-e), which exhibits a 30% reduction in plant height compared with Zhongshuang 11-HP (ZS11-HP). Quantitative trait locus sequencing (QTL-seq) was conducted using two extreme DNA bulks in F₂ populations in Wuchang-2017 derived from ZS11-HP × sdw-e to identify QTLs associated with plant height. The result suggested that two QTL intervals were located on chromosome A10. The F₂ population consisting of 200 individuals in Yangluo-2018 derived from ZS11-HP × sdw-e was used to construct a high-density linkage map using whole-genome resequencing. The high-density linkage map harbored 4323 bin markers and covered a total distance of 2026.52 cM with an average marker interval of 0.47 cM. The major QTL for plant height named qPHA10 was identified on linkage group A10 by interval mapping and composite interval mapping methods. The major QTL qPHA10 was highly consistent with the QTL-seq results. And then, we integrated the variation sites and expression levels of genes in the major QTL interval to predict the candidate genes. Thus, the identified QTL and candidate genes could be used in marker-assisted selection for B. napus breeding in the future.

Characterization and fine mapping of a new dwarf mutant in Brassica napus

BACKGROUND

Plant height is an important plant characteristic closely related to yield performance of many crops. Reasonable reduction of plant height of crops is beneficial for improving yield and enhancing lodging resistance.

RESULTS

In the present study, we described the Brassica napus dwarf mutant bnd2 that was isolated using ethyl methanesulfonate (EMS) mutagenesis. Compared to wild type (WT), bnd2 exhibited reduced height and shorter hypocotyl and petiole leaves. By crossing the bnd2 mutant with the WT strain, we found that the ratio of the mutant to the WT in the F₂ population was close to 1:3, indicating that bnd2 is a recessive mutation of a single locus. Following bulked segregant analysis (BSA) by resequencing, BND2 was found to be located in the 13.77-18.08 Mb interval of chromosome A08, with a length of 4.31 Mb. After fine mapping with single nucleotide polymorphism (SNP) and insertion/deletion (InDel) markers, the gene was narrowed to a 140-Kb interval ranging from 15.62 Mb to 15.76 Mb. According to reference genome annotation, there were 27 genes in the interval, of which BnaA08g20960D had an SNP type variation in the intron between the mutant and its parent, which may be the candidate gene corresponding to BND2. The hybrid line derived from a cross between the mutant bnd2 and the commercial cultivar L329 had similar plant height but higher grain yield compared to the commercial cultivar, suggesting that the allele bnd2 is beneficial for hybrid breeding of lodging resistant and high yield rapeseed.

CONCLUSION

In this study, we identified a novel dwarf mutant of rapeseed with a new locus, which may be useful for functional analyses of genetic mechanisms of plant architecture and grain yield in rapeseed.

A holistic decision-making approach for identifying influential parameters affecting sustainable production process of canola bast fibres and predicting end-use textile choice using principal component analysis (PCA)

Recent research has discovered and validated that canola fibre polymer has a lower density than major industrial fibres like cotton, jute, hemp, or flax. A few studies have identified key backgrounds that relate to canola fibre polymer production parameters; however, none have modelled an analytical hierarchy process to identify the influential parameters while producing the canola fibre polymers. The current study used Plackett-Burman design analysis to optimize the fibre polymer yield (%) during retting Statistical tools including Fisher's LSD, ANOVA, Pearson's correlation coefficient, and principal component analysis (PCA) were applied for a comparative analysis among four different canola cultivars (HYHEAR 1, Topas, 5440, 45H29). Physical testing and non-parametric statistical analysis tools like Chi-square (X²) test were used to investigate the effect of cultivar on the physique of the stems--the source of biomass. This holistic approach was taken to correlate key factors for the sustainable manufacturing of canola fibre polymers. Such knowledge will lay an effective foundation for future material-science research works, consumer wearable manufacturing industries, and engineering design for composite or nonwoven fabrication using this lightweight natural fibre polymer.

Fine mapping of the BnUC2 locus related to leaf up-curling and plant semi-dwarfing in Brassica napus

Background

Studies of leaf shape development and plant stature have made important contributions to the fields of plant breeding and developmental biology. The optimization of leaf morphology and plant height to improve lodging resistance and photosynthetic efficiency, increase planting density and yield, and facilitate mechanized harvesting is a desirable goal in Brassica napus.

Results

Here, we investigated a B. napus germplasm resource exhibiting up-curled leaves and a semi-dwarf stature. In progeny populations derived from NJAU5737 and Zhongshuang 11 (ZS11), we found that the up-curled leaf trait was controlled by a dominant locus, BnUC2. We then fine mapped the BnUC2 locus onto an 83.19-kb interval on chromosome A05 using single nucleotide polymorphism (SNP) and simple sequence repeat (SSR) markers. We further determined that BnUC2 was a major plant height QTL that explained approximately 70% of the phenotypic variation in two BC₅F₃ family populations derived from NJAU5737 and ZS11. This result implies that BnUC2 was also responsible for the observed semi-dwarf stature. The fine mapping interval of BnUC2 contained five genes, two of which, BnaA05g16700D (BnaA05.IAA2) and BnaA05g16720D, were revealed by comparative sequencing to be mutated in NJAU5737. This result suggests that the candidate gene mutation (BnaA05g16700D, encoding Aux/IAA2 proteins) in the conserved Degron motif GWPPV (P63S) was responsible for the BnUC2 locus. In addition, investigation of agronomic traits in a segregated population indicated that plant height, main inflorescence length, and branching height were significantly reduced by BnUC2, whereas yield was not significantly altered. The determination of the photosynthetic efficiency showed that the BnUC2 locus was beneficial to improve the photosynthetic efficiency. Our findings may provide an effective foundation for plant type breeding in B. napus.

Conclusions

Using SNP and SSR markers, a dominant locus (BnUC2) related to up-curled leaves and semi-dwarf stature in B. napus has been fine mapped onto an 83.19-kb interval of chromosome A05 containing five genes. The BnaA05.IAA2 is inferred to be the candidate gene responsible for the BnUC2 locus.

Fine-mapping and transcriptome analysis of a candidate gene controlling plant height in Brassica napus L

BACKGROUND

Brassica napus provides approximately 13-16% of global vegetable oil for human consumption and biodiesel production. Plant height (PH) is a key trait that affects plant architecture, seed yield and harvest index. However, the genetic mechanism of PH in B. napus is poorly understood.

RESULTS

A dwarf mutant df59 was isolated from a large-scale screening of an ethyl methanesulphonate-mutagenized rapeseed variety Ningyou 18. A genetic analysis showed that the dwarfism phenotype was controlled by one semi-dominant gene, which was mapped on C9 chromosome by quantitative trait loci sequencing analysis and designated as BnaDwf.C9. To fine-map BnaDwf.C9, two F2 populations were constructed from crosses between conventional rapeseed cultivars (Zhongshuang 11 and Holly) and df59. BnaDwf.C9 was fine-mapped to the region between single-nucleotide polymorphism (SNP) markers M14 and M4, corresponding to a 120.87-kb interval of the B. napus 'Darmor-bzh' genome. Within this interval, seven, eight and nine annotated or predicted genes were identified in "Darmor-bzh", "Ningyou 7" and "Zhongshuang 11" reference genomes, respectively. In addition, a comparative transcriptome analysis was performed using stem tips from Ningyou 18 and df59 at the stem elongation stage. In total, 3995 differentially expressed genes (DEGs) were identified. Among them, 118 DEGs were clustered in plant hormone-related signal transduction pathways, including 81 DEGs were enriched in auxin signal transduction. Combining the results of fine-mapping and transcriptome analyses, BnaC09g20450D was considered a candidate gene for BnaDwf.C9, which contains a SNP that co-segregated in 4746 individuals. Finally, a PCR-based marker was developed based on the SNP in BnaC09g20450D.

CONCLUSIONS

The combination of quantitative trait loci sequencing, fine-mapping and genome-wide transcriptomic analysis revealed one candidate gene located within the confidence interval of 120.87-kb region. This study provides a new genetic resource for semi-dwarf breeding and new insights into understanding the genetic architecture of PH in B. napus.

Identification and fine mapping of a major locus controlling branching in Brassica napus

A candidate branching-controlling gene for qDBA09 was identified after delimiting a Brassica napus recessive locus within a 270-kb interval on chromosome A09. Although branching is an important trait associated with the adaptation and yield potential of rapeseed (Brassica napus), the genetic mechanisms underlining branching in this crop remain poorly understood. In this study, we characterized a naturally occurring rapeseed mutant, db1, which showed an ultrahigh branching density phenotype. By combining bulked segregant analysis (BSA) and the Brassica 60K SNP BeadChip Array, we identified two major quantitative trait loci (QTLs), qDBA09 and qDBC06, which were subsequently confirmed using the traditional QTL-mapping approach. Analysis of 208 individuals from a BC₁F₃ population indicated that the qDBA09 locus is a single Mendelian factor and that the dense branching phenotype is controlled by a single recessive gene. Furthermore, QTL analysis confirmed that qDBA09 explained between 9.5 and 70.5% of the variation in branching-related traits. Using 7785 individuals from the BC₁F₃ population, we mapped qDBA09 to a DNA fragment of approximately 270 kb in length that contained 27 predicted genes, three of which were identified as potentially involved in the control of the dense branching trait. Based on the reported function of these genes, together with sequence comparisons and co-segregation analysis, we identified a potential candidate gene for the qDBA09 locus. The present findings lay the foundations for further in-depth research on the branching mechanisms of B. napus.

Fine mapping and candidate gene analysis of a seed glucosinolate content QTL, qGSL-C2, in rapeseed (Brassica napus L.)

QTL mapping and candidate gene analysis indicate that allelic variations in BnaC2.MYB28 resulted from homeologous exchange and determine difference in seed glucosinolate content. A low seed glucosinolate content has long been an important breeding objective in rapeseed improvement. However, the molecular mechanisms underlying seed GSL content variations remain to be elucidated in allotetraploid Brassica napus. Here, we developed a double haploid population from a cross between two B. napus accessions that possess relatively low, but significantly different seed GSL contents and identified a major QTL, qGSL-C2, on chromosome C02 that explains 30.88-72.87% of the phenotypic variation observed in five environments. Using near-isogenic lines, we further delimited qGSL-C2 to a physical region of 49 kb on the B. rapa chromosome A02 which is highly homologous to the target C02 interval. Among five candidate genes, BnaC2.MYB28, a homologue of the Arabidopsis MYB28 encoding a putative R2R3-MYB-type transcription factor functioning in aliphatic methionine-derived GSL synthesis, was most likely to be the target gene underlying the QTL. Sequence analysis revealed multiple insertion/deletion and SNP variations in the genomic region between the alleles of the NILs. Furthermore, the allelic variations in BnaC2.MYB28 in the natural B. napus population were significantly associated with seed GSL content. Remarkably, the phylogenetic analysis and sequence comparison suggested that while the BnaC2.MYB28 allele from the parental line G120 was inherited from B. oleracea BolC2.MYB28, its counterpart from the other parent, 9172, most likely evolved from B. rapa BraA2.MYB28 via possible homeologous exchange. Our study promotes greater understanding of the molecular regulation of seed GSL content and provides useful molecular markers for seed GSL improvement in B. napus.

An auxin signaling gene BnaA3.IAA7 contributes to improved plant architecture and yield heterosis in rapeseed

Plant architecture is the key factor affecting overall yield in many crops. The genetic basis underlying plant architecture in rapeseed (Brassica napus), a key global oil crop, is elusive. We characterized an ethyl methanesulfonate (EMS)-mutagenized rapeseed mutant, sca, which had multiple phenotypic alterations, including crinkled leaves, semi-dwarf stature, narrow branch angles and upward-standing siliques. We identified the underlying gene, which encodes an Aux/IAA protein (BnaA3.IAA7). A G-to-A mutation changed the glycine at the 84^th position to glutamic acid (G84E), disrupting the conserved degron motif GWPPV and reducing the affinity between BnaA3.IAA7 and TIR1 (TRANSPORT INHIBITOR RESPONSE 1) in an auxin dosage-dependent manner. This change repressed the degradation of BnaA3.IAA7 and therefore repressed auxin signaling at low levels of auxin that reduced the length of internodes. The G84E mutation reduced branch angles by enhancing the gravitropic response. The heterozygote +/sca closely resembled a proposed ideal plant architecture, displaying strong yield heterosis through single-locus overdominance by improving multiple component traits. Our findings demonstrate that a weak gain-of-function mutation in BnaA3.IAA7 contributes to yield heterosis by improving plant architecture and would be valuable for breeding superior rapeseed hybrid cultivars and such a mutation may increase the yield in other Brassica crops.

Morphological, transcriptomics and biochemical characterization of new dwarf mutant of Brassica napus

Plant height is a key trait of plant architecture, and is responsible for both yield and lodging resistance in Brassica napus. A dwarf mutant line (bnaC.dwf) was obtained by chemical mutagenesis of an inbred line T6. However, the molecular mechanisms and changed biological processes of the dwarf mutant remain to be determined. In this study, a comparative transcriptome analysis between bnaC.dwf and T6 plants was performed to identify genome-wide differentially expressed genes (DEGs) and possible biological processes that may explain the phenotype variations in bnaC.dwf. As a result of this analysis, 60,134,746-60,301,384 clean reads were aligned to 60,074 genes in the B. napus genome, and accounted for 60.03% of the annotated genes. In total, 819 differentially expressed genes were used for GO (Gene Ontology) term and KEGG (Kyoto Encyclopedia of Genes and Genomes) pathway enrichment analyses with a FDR (false discovery rate) criterion of <0.001, |log₂Ratio| ≥ 1. We focused on plant hormone signal transduction pathways, plant-pathogen interaction pathway, protein phosphorylation and degradation pathways and sugar metabolism pathways. Taken together, the decrease in local auxin (IAA) levels, the variation in BnTCH4, BnKAN1, BnERF109, COI1-JAZ9-MYC2, auxin response genes (BnGH3.11, BnSAUR78, and AUX/IAA19), and ABA (abscisic acid) signaling genes (BnADP5, BnSnRK2.1, BnABF3.1) partially accounted for variations of cell proliferation in internodes, shoot and root apical meristem maintenance, abiotic and biotic stress resistance, and pre-harvest sprouting. As a comprehensive consequence of the cross-talk between plant hormones, sugar metabolism, plant-pathogen interactions and protein metabolism, bnaC.dwf presents distinct phenotypes from T6. These results will be helpful for shedding light on molecular mechanisms in the dwarf mutant, and give insight into further molecular breeding of semi-dwarf B. napus.

Brassica napus DS-3, encoding a DELLA protein, negatively regulates stem elongation through gibberellin signaling pathway

Identification and characterization of a semi-dwarfing gene ds-3 encoding a mutant DELLA protein regulating plant height through gibberellin signaling pathway. Lodging is one of the most important factors causing severe yield loss in oilseed rape. Utilization of semi-dwarf varieties has been proved the most effective way to increase lodging resistance and yield in many crops. To develop semi-dwarf germplasm in oilseed rape, we identified a semi-dwarf mutant ds-3 which showed a reduced response to phytohormones gibberellins (GAs). Genetic analysis indicated the dwarfism was controlled by a single semi-dominant gene, ds-3. The DS-3 gene was mapped to a genomic region on chromosome C07, which is syntenic to the region of a previously identified semi-dwarf gene ds-1 (BnaA06.RGA). In this region, DS-3 (BnaC07.RGA) gene was identified to encode a DELLA protein that functions as a repressor in GA signaling pathway. A substitution of proline to leucine was identified in ds-3 in the conserved VHYNP motif, which is essential for GA-dependent interaction between gibberellin receptor GID1 and DELLA proteins. Segregation analysis in the F₂ population derived from the cross between ds-1 and ds-3 demonstrated that BnaA06.RGA displayed a stronger effect on plant height than BnaC07.RGA, indicating that different RGA genes may play different roles in stem elongation. In addition to BnaA06.RGA and BnaC07.RGA, two more RGA genes (BnaA09.RGA and BnaC09.RGA) were identified in the Brassica napus (B. napus) genome. Reverse-transcription polymerase chain reaction (RT-PCR) and yeast two-hybrid (Y2H) assays suggest that both BnaA09.RGA and BnaC09.RGA are transcribed in leaves and stems and can mediate GA signaling in vivo. These genes represent potential targets for screening ideal semi-dwarfing alleles for oilseed rape breeding.

Mapping a major QTL responsible for dwarf architecture in Brassica napus using a single-nucleotide polymorphism marker approach

BACKGROUND

Key genes related to plant type traits have played very important roles in the "green revolution" by increasing lodging resistance and elevating the harvest indices of crop cultivars. Although there have been numerous achievements in the development of dwarfism and plant type in Brassica napus breeding, exploring new materials conferring oilseed rape with efficient plant types that provide higher yields is still of significance in breeding, as well as in elucidating the mechanisms underlying plant development. Here, we report a new dwarf architecture with down-curved leaf mutant (Bndwf/dcl1) isolated from an ethyl methanesulphonate (EMS)-mutagenized B. napus line, together with its inheritance and gene mapping, and pleiotropic effects of the mapped locus on plant-type traits.

RESULTS

We constructed a high-density single-nucleotide polymorphism (SNP) map using a backcross population derived from the Bndwf/dcl1 mutant and the canola cultivar 'zhongshuang11' ('ZS11') and mapped the dwarf architecture with the down-curved leaf dominant locus, BnDWF/DCL1, in a 6.58-cM interval between SNP marker bins M46180 and M49962 on the linkage group (LG) C05 of B. napus. Further mapping with other materials derived from Bndwf/dcl1 narrowed the interval harbouring BnDWF/DCL1 to 175 kb in length and this interval contained 16 annotated genes. Quantitative trait locus (QTL) mappings with the backcross population for plant type traits, including plant height, branching height, main raceme length and average branching interval, indicated that the mapped QTLs for plant type traits were located at the same position as the BnDWF/DCL1 locus.

CONCLUSIONS

This study suggests that the BnDWF/DCL1 locus is a major pleiotropic locus/QTL in B. napus, which may reduce plant height, alter plant type traits and change leaf shape, and thus may lead to compact plant architecture. Accordingly, this locus may have substantial breeding potential for increasing planting density.

Fine mapping of a dominant gene conferring chlorophyll-deficiency in Brassica napus

Leaf colour regulation is important in photosynthesis and dry material production. Most of the reported chlorophyll-deficient loci are recessive. The dominant locus is rarely reported, although it may be more important than the recessive locus in the regulation of photosynthesis efficiency. During the present study, we mapped a chlorophyll-deficient dominant locus (CDE1) from the ethyl methanesulfonate-mutagenized Brassica napus line NJ7982. Using an F₂ population derived from the chlorophyll-deficient mutant (cde1) and the canola variety ‘zhongshuang11’, a high-density linkage map was constructed, consisting of 19 linkage groups with 2,878 bins containing 13,347 SNP markers, with a total linkage map length of 1,968.6 cM. Next, the CDE1 locus was mapped in a 0.9-cM interval of chromosome C08 of B. napus, co-segregating with nine SNP markers. In the following fine-mapping of the gene using the inherited F_2:3 populations of 620 individuals, the locus was identified in an interval with a length of 311 kb. A bioinformatics analysis revealed that the mapping interval contained 22 genes. These results produced a good foundation for continued research on the dominant locus involved in chlorophyll content regulation.