Rice diversity panel provides accurate genomic predictions for complex traits in the progenies of biparental crosses involving members of the panel

Integrating genome-wide association study into genomic selection for the prediction of agronomic traits in rice (Oryza sativa L.)

Accurately identifying varieties with targeted agronomic traits was thought to contribute to genetic selection and accelerate rice breeding progress. Genomic selection (GS) is a promising technique that uses markers covering the whole genome to predict the genomic-estimated breeding values (GEBV), with the ability to select before phenotypes are measured. To choose the appropriate GS models for breeding work, we analyzed the predictability of nine agronomic traits measured from a population of 459 diverse rice varieties. By the comparison of eight representative GS models, we found that the prediction accuracies ranged from 0.407 to 0.896, with reproducing kernel Hilbert space (RKHS) having the highest predictive ability in most traits. Further results demonstrated the predictivity of GS is altered by several factors. Moreover, we assessed the method of integrating genome-wide association study (GWAS) into various GS models. The predictabilities of GS combined peak-associated markers generated from six different GWAS models were significantly different; a recommendation of Mixed Linear Model (MLM)-RKHS was given for the GWAS-GS-integrated prediction. Finally, based on the above result, we experimented with applying the P-values obtained from optimal GWAS models into ridge regression best linear unbiased prediction (rrBLUP), which benefited the low predictive traits in rice.

Supplementary Information

The online version contains supplementary material available at 10.1007/s11032-023-01423-y.

Optimization of Multi-Generation Multi-location Genomic Prediction Models for Recurrent Genomic Selection in an Upland Rice Population

Genomic selection is a worthy breeding method to improve genetic gain in recurrent selection breeding schemes. The integration of multi-generation and multi-location information could significantly improve genomic prediction models in the context of shuttle breeding. The Cirad-CIAT upland rice breeding program applies recurrent genomic selection and seeks to optimize the scheme to increase genetic gain while reducing phenotyping efforts. We used a synthetic population (PCT27) of which S0 plants were all genotyped and advanced by selfing and bulk seed harvest to the S0:2, S0:3, and S0:4 generations. The PCT27 was then divided into two sets. The S0:2 and S0:3 progenies for PCT27A and the S0:4 progenies for PCT27B were phenotyped in two locations: Santa Rosa the target selection location, within the upland rice growing area, and Palmira, the surrogate location, far from the upland rice growing area but easier for experimentation. While the calibration used either one of the two sets phenotyped in one or two locations, the validation population was only the PCT27B phenotyped in Santa Rosa. Five scenarios of genomic prediction and 24 models were performed and compared. Training the prediction model with the PCT27B phenotyped in Santa Rosa resulted in predictive abilities ranging from 0.19 for grain zinc concentration to 0.30 for grain yield. Expanding the training set with the inclusion of the PCT27A resulted in greater predictive abilities for all traits but grain yield, with increases from 5% for plant height to 61% for grain zinc concentration. Models with the PCT27B phenotyped in two locations resulted in higher prediction accuracy when the models assumed no genotype-by-environment (G × E) interaction for flowering (0.38) and grain zinc concentration (0.27). For plant height, the model assuming a single G × E variance provided higher accuracy (0.28). The gain in predictive ability for grain yield was the greatest (0.25) when environment-specific variance deviation effect for G × E was considered. While the best scenario was specific to each trait, the results indicated that the gain in predictive ability provided by the multi-location and multi-generation calibration was low. Yet, this approach could lead to increased selection intensity, acceleration of the breeding cycle, and a sizable economic advantage for the program.

Genomic selection for salinity tolerance in japonica rice

Improving plant performance in salinity-prone conditions is a significant challenge in breeding programs. Genomic selection is currently integrated into many plant breeding programs as a tool for increasing selection intensity and precision for complex traits and for reducing breeding cycle length. A rice reference panel (RP) of 241 Oryza sativa L. japonica accessions genotyped with 20,255 SNPs grown in control and mild salinity stress conditions was evaluated at the vegetative stage for eight morphological traits and ion mass fractions (Na and K). Weak to strong genotype-by-condition interactions were found for the traits considered. Cross-validation showed that the predictive ability of genomic prediction methods ranged from 0.25 to 0.64 for multi-environment models with morphological traits and from 0.05 to 0.40 for indices of stress response and ion mass fractions. The performances of a breeding population (BP) comprising 393 japonica accessions were predicted with models trained on the RP. For validation of the predictive performances of the models, a subset of 41 accessions was selected from the BP and phenotyped under the same experimental conditions as the RP. The predictive abilities estimated on this subset ranged from 0.00 to 0.66 for the multi-environment models, depending on the traits, and were strongly correlated with the predictive abilities on cross-validation in the RP in salt condition (r = 0.69). We show here that genomic selection is efficient for predicting the salt stress tolerance of breeding lines. Genomic selection could improve the efficiency of rice breeding strategies for salinity-prone environments.

Integrated Genomic Selection for Accelerating Breeding Programs of Climate-Smart Cereals

Rapidly rising population and climate changes are two critical issues that require immediate action to achieve sustainable development goals. The rising population is posing increased demand for food, thereby pushing for an acceleration in agricultural production. Furthermore, increased anthropogenic activities have resulted in environmental pollution such as water pollution and soil degradation as well as alterations in the composition and concentration of environmental gases. These changes are affecting not only biodiversity loss but also affecting the physio-biochemical processes of crop plants, resulting in a stress-induced decline in crop yield. To overcome such problems and ensure the supply of food material, consistent efforts are being made to develop strategies and techniques to increase crop yield and to enhance tolerance toward climate-induced stress. Plant breeding evolved after domestication and initially remained dependent on phenotype-based selection for crop improvement. But it has grown through cytological and biochemical methods, and the newer contemporary methods are based on DNA-marker-based strategies that help in the selection of agronomically useful traits. These are now supported by high-end molecular biology tools like PCR, high-throughput genotyping and phenotyping, data from crop morpho-physiology, statistical tools, bioinformatics, and machine learning. After establishing its worth in animal breeding, genomic selection (GS), an improved variant of marker-assisted selection (MAS), has made its way into crop-breeding programs as a powerful selection tool. To develop novel breeding programs as well as innovative marker-based models for genetic evaluation, GS makes use of molecular genetic markers. GS can amend complex traits like yield as well as shorten the breeding period, making it advantageous over pedigree breeding and marker-assisted selection (MAS). It reduces the time and resources that are required for plant breeding while allowing for an increased genetic gain of complex attributes. It has been taken to new heights by integrating innovative and advanced technologies such as speed breeding, machine learning, and environmental/weather data to further harness the GS potential, an approach known as integrated genomic selection (IGS). This review highlights the IGS strategies, procedures, integrated approaches, and associated emerging issues, with a special emphasis on cereal crops. In this domain, efforts have been taken to highlight the potential of this cutting-edge innovation to develop climate-smart crops that can endure abiotic stresses with the motive of keeping production and quality at par with the global food demand.

Haplotype-tagged SNPs improve genomic prediction accuracy for Fusarium head blight resistance and yield-related traits in wheat

Linkage disequilibrium (LD)-based haplotyping with subsequent SNP tagging improved the genomic prediction accuracy up to 0.07 and 0.092 for Fusarium head blight resistance and spike width, respectively, across six different models. Genomic prediction is a powerful tool to enhance genetic gain in plant breeding. However, the method is accompanied by various complications leading to low prediction accuracy. One of the major challenges arises from the complex dimensionality of marker data. To overcome this issue, we applied two pre-selection methods for SNP markers viz. LD-based haplotype-tagging and GWAS-based trait-linked marker identification. Six different models were tested with preselected SNPs to predict the genomic estimated breeding values (GEBVs) of four traits measured in 419 winter wheat genotypes. Ten different sets of haplotype-tagged SNPs were selected by adjusting the level of LD thresholds. In addition, various sets of trait-linked SNPs were identified with different scenarios from the training-test combined and only from the training populations. The BRR and RR-BLUP models developed from haplotype-tagged SNPs had a higher prediction accuracy for FHB and SPW by 0.07 and 0.092, respectively, compared to the corresponding models developed without marker pre-selection. The highest prediction accuracy for SPW and FHB was achieved with tagged SNPs pruned at weak LD thresholds (r² < 0.5), while stringent LD was required for spike length (SPL) and flag leaf area (FLA). Trait-linked SNPs identified only from training populations failed to improve the prediction accuracy of the four studied traits. Pre-selection of SNPs via LD-based haplotype-tagging could play a vital role in optimizing genomic selection and reducing genotyping costs. Furthermore, the method could pave the way for developing low-cost genotyping methods through customized genotyping platforms targeting key SNP markers tagged to essential haplotype blocks.

Identification of Newer Stable Genetic Sources for High Grain Number per Panicle and Understanding the Gene Action for Important Panicle Traits in Rice

Rice is an important food crop extensively cultivated worldwide, and rice's grain yield should be improved to meet future food demand. Grain number per panicle is the main trait that determines the grain yield in rice, and other panicle-related traits influence the grain number. To study the genetic diversity, 50 diverse Indian-origin germplasm were evaluated for grain number per panicle and other panicle traits for two consecutive seasons (Rabi 2019 and Kharif 2020). The maximum genotypic and phenotypic coefficient of variation was obtained for the number of spikelets and filled grains per panicle. The genotypes were grouped into eight clusters with Mahalanobis' D² analysis and six groups using Principal component analysis. Based on, per se, performance for grain number per panicle and genetic distances, six parents were selected and subjected to full diallel mating. The genotypes CB12132, IET 28749, and BPT 5204 were the best general combiners for the number of filled grains per panicle and other panicle branching traits, viz., the number of primary and secondary branches per panicle. The hybrid BPT 5204 × CB 12132 identified as the best specific combination for most of the studied panicle traits. The additive gene effects were high for the number of filled grains per panicle, the number of primary branches, and secondary branches, whereas non-additive gene action was high for the number of productive tillers and grain yield per plant. The information obtained from this study will be useful in rice breeding programs to improve panicle traits, especially the grain number, which would result in higher grain yield.

Genome-wide association study and genomic prediction for yield and grain quality traits of hybrid rice

Genomic selection is an efficient tool for breeding selection, especially for quantitative traits controlled by multiples genes with low heritability. To validate the application of genomic selection in hybrid rice breeding, the yield and grain quality traits of 404 hybrid rice breeding lines were investigated, and the same accessions were genotyped by using a 56 K SNP chip. There were wide variances among the tested accessions for all the measured traits, and most of the traits were correlated. A total of 67 significant loci were identified for the yield-related traits, and 123 significant loci were identified for the grain quality traits by GWAS. Two of these loci associated with increasing grain yield but decreasing grain quality. The GEBVs of all the yield and grain quality traits were calculated by using 15 different prediction algorithms. The plant height, panicle length, thousand grain weight, grain length and width ratio, amylose content, and alkali value have higher predictability than other traits. However, the predictive accuracy of different GS models is different for different traits. This study provided useful information for genomic selection of specific trait using proper markers and prediction models.

Supplementary Information

The online version contains supplementary material available at 10.1007/s11032-022-01289-6.

Genomic Prediction: Progress and Perspectives for Rice Improvement

Genomic prediction can be a powerful tool to achieve greater rates of genetic gain for quantitative traits if thoroughly integrated into a breeding strategy. In rice as in other crops, the interest in genomic prediction is very strong with a number of studies addressing multiple aspects of its use, ranging from the more conceptual to the more practical. In this chapter, we review the literature on rice (Oryza sativa) and summarize important considerations for the integration of genomic prediction in breeding programs. The irrigated breeding program at the International Rice Research Institute is used as a concrete example on which we provide data and R scripts to reproduce the analysis but also to highlight practical challenges regarding the use of predictions. The adage "To someone with a hammer, everything looks like a nail" describes a common psychological pitfall that sometimes plagues the integration and application of new technologies to a discipline. We have designed this chapter to help rice breeders avoid that pitfall and appreciate the benefits and limitations of applying genomic prediction, as it is not always the best approach nor the first step to increasing the rate of genetic gain in every context.

Impact of early genomic prediction for recurrent selection in an upland rice synthetic population

Population breeding through recurrent selection is based on the repetition of evaluation and recombination among best-selected individuals. In this type of breeding strategy, early evaluation of selection candidates combined with genomic prediction could substantially shorten the breeding cycle length, thus increasing the rate of genetic gain. The objective of this study was to optimize early genomic prediction in an upland rice (Oryza sativa L.) synthetic population improved through recurrent selection via shuttle breeding in two sites. To this end, we used genomic prediction on 334 S0 genotypes evaluated with early generation progeny testing (S0:2 and S0:3) across two sites. Four traits were measured (plant height, days to flowering, grain yield, and grain zinc concentration) and the predictive ability was assessed for the target site. For days to flowering and plant height, which correlate well among sites (0.51-0.62), an increase of up to 0.4 in predictive ability was observed when the model was trained using the two sites. For grain zinc concentration, adding the phenotype of the predicted lines in the nontarget site to the model improved the predictive ability (0.51 with two-site and 0.31 with single-site model), whereas for grain yield the gain was less (0.42 with two-site and 0.35 with single-site calibration). Through these results, we found a good opportunity to optimize the genomic recurrent selection scheme and maximize the use of resources by performing early progeny testing in two sites for traits with best expression and/or relevance in each specific environment.

Genomic Prediction of Grain Yield in a Barley MAGIC Population Modeling Genotype per Environment Interaction

Multi-parent Advanced Generation Inter-crosses (MAGIC) lines have mosaic genomes that are generated shuffling the genetic material of the founder parents following pre-defined crossing schemes. In cereal crops, these experimental populations have been extensively used to investigate the genetic bases of several traits and dissect the genetic bases of epistasis. In plants, genomic prediction models are usually fitted using either diverse panels of mostly unrelated accessions or individuals of biparental families and several empirical analyses have been conducted to evaluate the predictive ability of models fitted to these populations using different traits. In this paper, we constructed, genotyped and evaluated a barley MAGIC population of 352 individuals developed with a diverse set of eight founder parents showing contrasting phenotypes for grain yield. We combined phenotypic and genotypic information of this MAGIC population to fit several genomic prediction models which were cross-validated to conduct empirical analyses aimed at examining the predictive ability of these models varying the sizes of training populations. Moreover, several methods to optimize the composition of the training population were also applied to this MAGIC population and cross-validated to estimate the resulting predictive ability. Finally, extensive phenotypic data generated in field trials organized across an ample range of water regimes and climatic conditions in the Mediterranean were used to fit and cross-validate multi-environment genomic prediction models including G×E interaction, using both genomic best linear unbiased prediction and reproducing kernel Hilbert space along with a non-linear Gaussian Kernel. Overall, our empirical analyses showed that genomic prediction models trained with a limited number of MAGIC lines can be used to predict grain yield with values of predictive ability that vary from 0.25 to 0.60 and that beyond QTL mapping and analysis of epistatic effects, MAGIC population might be used to successfully fit genomic prediction models. We concluded that for grain yield, the single-environment genomic prediction models examined in this study are equivalent in terms of predictive ability while, in general, multi-environment models that explicitly split marker effects in main and environmental-specific effects outperform simpler multi-environment models.

Improving Prediction Accuracy Using Multi-allelic Haplotype Prediction and Training Population Optimization in Wheat

The use of haplotypes may improve the accuracy of genomic prediction over single SNPs because haplotypes can better capture linkage disequilibrium and genomic similarity in different lines and may capture local high-order allelic interactions. Additionally, prediction accuracy could be improved by portraying population structure in the calibration set. A set of 383 advanced lines and cultivars that represent the diversity of the University of Minnesota wheat breeding program was phenotyped for yield, test weight, and protein content and genotyped using the Illumina 90K SNP Assay. Population structure was confirmed using single SNPs. Haplotype blocks of 5, 10, 15, and 20 adjacent markers were constructed for all chromosomes. A multi-allelic haplotype prediction algorithm was implemented and compared with single SNPs using both k-fold cross validation and stratified sampling optimization. After confirming population structure, the stratified sampling improved the predictive ability compared with k-fold cross validation for yield and protein content, but reduced the predictive ability for test weight. In all cases, haplotype predictions outperformed single SNPs. Haplotypes of 15 adjacent markers showed the best improvement in accuracy for all traits; however, this was more pronounced in yield and protein content. The combined use of haplotypes of 15 adjacent markers and training population optimization significantly improved the predictive ability for yield and protein content by 14.3 (four percentage points) and 16.8% (seven percentage points), respectively, compared with using single SNPs and k-fold cross validation. These results emphasize the effectiveness of using haplotypes in genomic selection to increase genetic gain in self-fertilized crops.

Accuracy of genomic selection for grain yield and agronomic traits in soft red winter wheat

BACKGROUND

Genomic selection has the potential to increase genetic gains by using molecular markers as predictors of breeding values of individuals. This study evaluated the accuracy of predictions for grain yield, heading date, plant height, and yield components in soft red winter wheat under different prediction scenarios. Response to selection for grain yield was also compared across different selection strategies- phenotypic, marker-based, genomic, combination of phenotypic and genomic, and random selections.

RESULTS

Genomic selection was implemented through a ridge regression best linear unbiased prediction model in two scenarios- cross-validations and independent predictions. Accuracy for cross-validations was assessed using a diverse panel under different marker number, training population size, relatedness between training and validation populations, and inclusion of fixed effect in the model. The population in the first scenario was then trained and used to predict grain yield of biparental populations for independent validations. Using subsets of significant markers from association mapping increased accuracy by 64-70% for grain yield but resulted in lower accuracy for traits with high heritability such as plant height. Increasing size of training population resulted in an increase in accuracy, with maximum values reached when ~ 60% of the lines were used as a training panel. Predictions using related subpopulations also resulted in higher accuracies. Inclusion of major growth habit genes as fixed effect in the model caused increase in grain yield accuracy under a cross-validation procedure. Independent predictions resulted in accuracy ranging between - 0.14 and 0.43, dependent on the grouping of site-year data for the training and validation populations. Genomic selection was "superior" to marker-based selection in terms of response to selection for yield. Supplementing phenotypic with genomic selection resulted in approximately 10% gain in response compared to using phenotypic selection alone.

CONCLUSIONS

Our results showed the effects of different factors on accuracy for yield and agronomic traits. Among the factors studied, training population size and relatedness between training and validation population had the greatest impact on accuracy. Ultimately, combining phenotypic with genomic selection would be relevant for accelerating genetic gains for yield in winter wheat.

Genomic prediction offers the most effective marker assisted breeding approach for ability to prevent arsenic accumulation in rice grains

The high concentration of arsenic (As) in rice grains, in a large proportion of the rice growing areas, is a critical issue. This study explores the feasibility of conventional (QTL-based) marker-assisted selection and genomic selection to improve the ability of rice to prevent As uptake and accumulation in the edible grains. A japonica diversity panel (RP) of 228 accessions phenotyped for As concentration in the flag leaf (FL-As) and in the dehulled grain (CG-As), and genotyped at 22,370 SNP loci, was used to map QTLs by association analysis (GWAS) and to train genomic prediction models. Similar phenotypic and genotypic data from 95 advanced breeding lines (VP) with japonica genetic backgrounds, was used to validate related QTLs mapped in the RP through GWAS and to evaluate the predictive ability of across populations (RP-VP) genomic estimate of breeding value (GEBV) for As exclusion. Several QTLs for FL-As and CG-As with a low-medium individual effect were detected in the RP, of which some colocalized with known QTLs and candidate genes. However, less than 10% of those QTLs could be validated in the VP without loosening colocalization parameters. Conversely, the average predictive ability of across populations GEBV was rather high, 0.43 for FL-As and 0.48 for CG-As, ensuring genetic gains per time unit close to phenotypic selection. The implications of the limited robustness of the GWAS results and the rather high predictive ability of genomic prediction are discussed for breeding rice for significantly low arsenic uptake and accumulation in the edible grains.

Simultaneous selection for grain yield and protein content in genomics-assisted wheat breeding

KEY MESSAGE

Large genetic improvement can be achieved by simultaneous genomic selection for grain yield and protein content when combining different breeding strategies in the form of selection indices. Genomic selection has been implemented in many national and international breeding programmes in recent years. Numerous studies have shown the potential of this new breeding tool; few have, however, taken the simultaneous selection for multiple traits into account that is though common practice in breeding programmes. The simultaneous improvement in grain yield and protein content is thereby a major challenge in wheat breeding due to a severe negative trade-off. Accordingly, the potential and limits of multi-trait selection for this particular trait complex utilizing the vast phenotypic and genomic data collected in an applied wheat breeding programme were investigated in this study. Two breeding strategies based on various genomic-selection indices were compared, which (1) aimed to select high-protein genotypes with acceptable yield potential and (2) develop high-yielding varieties, while maintaining protein content. The prediction accuracy of preliminary yield trials could be strongly improved when combining phenotypic and genomic information in a genomics-assisted selection approach, which surpassed both genomics-based and classical phenotypic selection methods both for single trait predictions and in genomic index selection across years. The employed genomic selection indices mitigated furthermore the negative trade-off between grain yield and protein content leading to a substantial selection response for protein yield, i.e. total seed nitrogen content, which suggested that it is feasible to develop varieties that combine a superior yield potential with comparably high protein content, thus utilizing available nitrogen resources more efficiently.

Selection of trait-specific markers and multi-environment models improve genomic predictive ability in rice

Developing high yielding rice varieties that are tolerant to drought stress is crucial for the sustainable livelihood of rice farmers in rainfed rice cropping ecosystems. Genomic selection (GS) promises to be an effective breeding option for these complex traits. We evaluated the effectiveness of two rather new options in the implementation of GS: trait and environment-specific marker selection and the use of multi-environment prediction models. A reference population of 280 rainfed lowland accessions endowed with 215k SNP markers data was phenotyped under a favorable and two managed drought environments. Trait-specific SNP subsets (28k) were selected for each trait under each environment, using results of GWAS performed with the complete genotype dataset. Performances of single-environment and multi-environment genomic prediction models were compared using kernel regression based methods (GBLUP and RKHS) under two cross validation scenarios: availability (CV2) or not (CV1) of phenotypic data for the validation set, in one of the environments. Trait-specific marker selection strategy achieved predictive ability (PA) of genomic prediction up to 22% higher than markers selected on the bases of neutral linkage disequilibrium (LD). Tolerance to drought stress was up to 32% better predicted by multi-environment models (especially RKHS based models) under CV2 strategy. Under the less favorable CV1 strategy, the multi-environment models achieved similar PA than the single-environment predictions. We also showed that reasonable PA could be obtained with as few as 3,000 SNP markers, even in a population of low LD extent, provided marker selection is based on pairwise LD. The implications of these findings for breeding for drought tolerance are discussed. The most resource sparing option would be accurate phenotyping of the reference population in a favorable environment and under a managed drought, while the candidate population would be phenotyped only under one of those environments.

Optimising Genomic Selection in Wheat: Effect of Marker Density, Population Size and Population Structure on Prediction Accuracy

Genomic selection applied to plant breeding enables earlier estimates of a line’s performance and significant reductions in generation interval. Several factors affecting prediction accuracy should be well understood if breeders are to harness genomic selection to its full potential. We used a panel of 10,375 bread wheat (Triticum aestivum) lines genotyped with 18,101 SNP markers to investigate the effect and interaction of training set size, population structure and marker density on genomic prediction accuracy. Through assessing the effect of training set size we showed the rate at which prediction accuracy increases is slower beyond approximately 2,000 lines. The structure of the panel was assessed via principal component analysis and K-means clustering, and its effect on prediction accuracy was examined through a novel cross-validation analysis according to the K-means clusters and breeding cohorts. Here we showed that accuracy can be improved by increasing the diversity within the training set, particularly when relatedness between training and validation sets is low. The breeding cohort analysis revealed that traits with higher selection pressure (lower allelic diversity) can be more accurately predicted by including several previous cohorts in the training set. The effect of marker density and its interaction with population structure was assessed for marker subsets containing between 100 and 17,181 markers. This analysis showed that response to increased marker density is largest when using a diverse training set to predict between poorly related material. These findings represent a significant resource for plant breeders and contribute to the collective knowledge on the optimal structure of calibration panels for genomic prediction.

Genomic Prediction Accounting for Genotype by Environment Interaction Offers an Effective Framework for Breeding Simultaneously for Adaptation to an Abiotic Stress and Performance Under Normal Cropping Conditions in Rice

Developing rice varieties adapted to alternate wetting and drying water management is crucial for the sustainability of irrigated rice cropping systems. Here we report the first study exploring the feasibility of breeding rice for adaptation to alternate wetting and drying using genomic prediction methods that account for genotype by environment interactions. Two breeding populations (a reference panel of 284 accessions and a progeny population of 97 advanced lines) were evaluated under alternate wetting and drying and continuous flooding management systems. The predictive ability of genomic prediction for response variables (index of relative performance and the slope of the joint regression) and for multi-environment genomic prediction models were compared. For the three traits considered (days to flowering, panicle weight and nitrogen-balance index), significant genotype by environment interactions were observed in both populations. In cross validation, predictive ability for the index was on average lower (0.31) than that of the slope of the joint regression (0.64) whatever the trait considered. Similar results were found for progeny validation. Both cross-validation and progeny validation experiments showed that the performance of multi-environment models predicting unobserved phenotypes of untested entrees was similar to the performance of single environment models with differences in predictive ability ranging from -6–4% depending on the trait and on the statistical model concerned. The predictive ability of multi-environment models predicting unobserved phenotypes of entrees evaluated under both water management systems outperformed single environment models by an average of 30%. Practical implications for breeding rice for adaptation to alternate wetting and drying system are discussed.