Co-occurrence of antibiotic and heavy metal resistance in Kızılırmak River isolates

Changes of MRGs and ARGs in Acinetobacter sp. SL-1 used for treatment of Cr(VI)-contaminated wastewater with waste molasses as carbon source

Antibiotic resistance genes (ARGs) may be synergistic selected during bio-treatment of chromium-containing wastewater and causing environmental risks through horizontal transfer. This research explored the impact of self-screening bacterium Acinetobacter sp. SL-1 on the treatment of chromium-containing wastewater under varying environmental conditions. The findings indicated that the optimal Cr(VI) removal conditions were an anaerobic environment, 30 °C temperature, 5 g/L waste molasses, 100 mg/L Cr(VI), pH = 7, and a reaction time of 168 h. Under these conditions, the removal of Cr(VI) reached 99.10 %, however, it also developed cross-resistance to tetracycline, gentamicin, clarithromycin, ofloxacin following exposure to Cr(VI). When decrease Cr(VI) concentration to 50 mg/L at pH of 9 with waste molasses as carbon source, the expression of ARGs was down regulated, which decreased the horizontal transfer possibility of ARGs and minimized the potential environmental pollution risk caused by ARGs. The study ultimately emphasized that the treatment of chromium-containing wastewater with waste molasses in conjunction with SL-1 not only effectively eliminates hexavalent chromium but also mitigates the risk of environmental pollution.

Co-selection mechanism for bacterial resistance to major chemical pollutants in the environment

Bacterial resistance is an emerging global public health problem, posing a significant threat to animal and human health. Chemical pollutants present in the environment exert selective pressure on bacteria, which acquire resistance through co-resistance, cross-resistance, co-regulation, and biofilm resistance. Resistance genes are horizontally transmitted in the environment through four mechanisms including conjugation transfer, bacterial transformation, bacteriophage transduction, and membrane vesicle transport, and even enter human bodies through the food chain, endangering human health. Although the co-selection effects of bacterial resistance to chemical pollutants has attracted widespread attention, the co-screening mechanism and co-transmission mechanisms remain unclear. Therefore, this article summarises the current research status of the co-selection effects and mechanism of environmental pollutants resistance, emphasising the necessity of studying the co-selection mechanism of bacteria against major chemical pollutants, and lays a solid theoretical foundation for conducting risk assessment of bacterial resistance.

Application of the Aliivibrio fischeri bacterium bioassay for assessing single and mixture effects of antibiotics and copper

The Aliivibrio fischeri bioassay was successfully applied in order to evaluate the acute effect of sulfamethoxazole (SMX), ciprofloxacin (CIP), chlortetracycline (CTC) and copper (Cu), alone or in binary, ternary, and overall mixture. The toxicity results are reported in terms of both effective concentrations, which inhibited 50% of the bacterium bioluminescence (EC50%), and in Toxic Units (TUs). The TUs were compared with predicted values obtained using the Concentration Addition model (CA). Finally, the toxicity of water extracts from a soil contaminated by the three antibiotics (7 mg Kg-1 each) in the presence/absence of copper (30 mg Kg-1) was also evaluated. Copper was the most toxic chemical (EC50: 0.78 mg L-1), followed by CTC (EC50: 3.64 mg L-1), CIP (96 mg L-1) and SMX (196 mg L-1). Comparing the TU and CA values of the mixtures, additive effects were generally found. However, a synergic action was recorded in the case of the CIP+Cu co-presence and antagonistic effects in the case of CTC+Cu and the ternary mixture (containing each antibiotic at 0.7 mg L-1), were identified. Soil water extracts did not show any toxicity, demonstrating the buffering ability of the soil to immobilize these chemicals.

Multi-Drug Resistance in Bacterial Genomes-A Comprehensive Bioinformatic Analysis

Antimicrobial resistance is presently one of the greatest threats to public health. The excessive and indiscriminate use of antibiotics imposes a continuous selective pressure that triggers the emergence of multi-drug resistance. We performed a large-scale analysis of closed bacterial genomes to identify multi-drug resistance considering the ResFinder antimicrobial classes. We found that more than 95% of the genomes harbor genes associated with resistance to disinfectants, glycopeptides, macrolides, and tetracyclines. On average, each genome encodes resistance to more than nine different classes of antimicrobial drugs. We found higher-than-expected co-occurrences of resistance genes in both plasmids and chromosomes for several classes of antibiotic resistance, including classes categorized as critical according to the World Health Organization (WHO). As a result of antibiotic-resistant priority pathogens, higher-than-expected co-occurrences appear in plasmids, increasing the potential for resistance dissemination. For the first time, co-occurrences of antibiotic resistance have been investigated for priority pathogens as defined by the WHO. For critically important pathogens, co-occurrences appear in plasmids, not in chromosomes, suggesting that the resistances may be epidemic and probably recent. These results hint at the need for new approaches to treating infections caused by critically important bacteria.

Effects of co-selection of antibiotic-resistance and metal-resistance genes on antibiotic-resistance potency of environmental bacteria and related ecological risk factors

The inadequate elimination of micropollutants in wastewater treatment plants (WWTP), cause to increase in the incidence of antibiotic resistant bacterial strains. Growth of microbial pathogens in WWTP is one of the serious public health problems. The widespread and simultaneous emergence of antibiotic resistance genes (ARGs) and heavy metal resistance genes (HMRGs) in the environment with heavy metals create persistent and selective pressure for co-selection of both genes on environmental microorganisms. Co-localization of ARGs and HMRGs on the same horizontal mobile genetic elements (MGEs) allows the spreading of numerous antibiotic-resistant strains of bacteria in aquatic and terrestrial environment. The biofilm formation and colonization potential of environmental bacteria leads to the co-selection of multi-antibiotic resistance and multi-metal tolerance. Horizontal gene transfer (HGT), co-localization of both ARGs and HMRGs on the same MGEs, and the shared resistomes are important bacteria-associated ecological risks factors, which reduce the effectiveness of antibiotics against bacterial infections.

Metagenomic evidence for co-occurrence of antibiotic, biocide and metal resistance genes in pigs

Antibiotic-resistant pathogens constitute an escalating public health concern. Hence a better understanding of the underlying processes responsible for this expansion is urgently needed. Co-selection of heavy metal/biocide and antibiotic resistance genes (ARGs) has been suggested as one potential mechanism promoting the proliferation of antimicrobial resistance (AMR). This paper aims to elucidate this interplay and exploit differences in antibiotic usage to infer patterns of co-selection by the non-antibiotic factors metals and biocides in the context of pig farming. We examined 278 gut metagenomes from pigs with continuous antibiotic exposure, only at weaning and at no exposure. Metals as growth promoters and biocides as disinfectants are currently used with little restrictions in stock farming. The pigs under continuous antibiotic exposure displayed the highest co-occurrence of ARGs and other genetic elements while the pigs under limited use of antibiotics still showed abundant co-occurrences. Pathogens belonging to Enterobacteriaceae displayed increased co-occurrence phenomena, suggesting that this maintenance is not a random selection process from a mobilized pool but pertains to specific phylogenetic clades. These results suggest that metals and biocides displayed strong selective pressures on ARGs exerted by intensive farming, regardless of the current use of antibiotics.

Patterns of antimicrobial resistance observed in the Middle East: Environmental and health care retrospectives

Antimicrobial resistance is one of the biggest worldwide challenging problems that associates with high morbidity and mortality rates. The resistance of bacteria to various antibiotic classes results in difficulties in the treatment of infectious diseases caused by those bacteria. This paper highlights and provides a critical overview of observational and experimental studies investigating the presence of antibiotic resistant bacteria in different environments in Middle East countries and the mechanisms by which bacteria acquire and spread resistance. The data of this research considered the published papers within the last ten years (2010-2020) and was carried out using PubMed. A total of 66 articles were selected in this review. This review covered studies done on antibiotic resistant bacteria found in a wide range of environments including foods, animals, groundwater, aquatic environments as well as industrial and hospital wastewater. They acquire and achieve their resistance through several mechanisms such as antibiotic resistant genes, efflux pumps and enzymatic reactions. However, the dissemination and spread of antibiotic resistant bacteria is affected by several factors like anthropogenic, domestic, inappropriate use of antibiotics and the expulsion of wastewater containing antibiotic residues to the environments. Therefore, it is important to increase the awareness regarding these activities and their effect on the environment and eventually on health.

Genetic Determinants for Metal Tolerance and Antimicrobial Resistance Detected in Bacteria Isolated from Soils of Olive Tree Farms

Copper-derived compounds are often used in olive tree farms. In a previous study, a collection of bacterial strains isolated from olive tree farms were identified and tested for phenotypic antimicrobial resistance and heavy metal tolerance. The aim of this work was to study the genetic determinants of resistance and to evaluate the co-occurrence of metal tolerance and antibiotic resistance genes. Both metal tolerance and antibiotic resistance genes (including beta-lactamase genes) were detected in the bacterial strains from Cu-treated soils. A high percentage of the strains positive for metal tolerance genes also carried antibiotic resistance genes, especially for genes involved in resistances to beta-lactams and tetracycline. Significant associations were detected between genes involved in copper tolerance and genes coding for beta-lactamases or tetracycline resistance mechanisms. A significant association was also detected between zntA (coding for a Zn(II)-translocating P-type ATPase) and tetC genes. In conclusion, bacteria from soils of Cu-treated olive farms may carry both metal tolerance and antibiotic resistance genes. The positive associations detected between metal tolerance genes and antibiotic resistance genes suggests co-selection of such genetic traits by exposure to metals.

Removal of antibiotic resistance genes in various water resources recovery facilities

Water resources recovery facilities (WWTPs) are hotspots for antibiotic resistance genes (ARGs) and pose a significant threat to environments. Therefore, ARG removal efficiencies of WWTPs are of great importance. In this study, conventional activated sludge (CAS), biological nutrient removal (BNR), sequencing batch reactor (SBR), membrane bioreactor (MBR), package MBR, and WWTP with coagulation-flocculation and UV disinfection units were investigated in terms of their removal efficiencies on overall bacterial genes with 16S rDNA and seven ARGs including the genes aadA, bla_CTX-M , cmlA, ermB, sul1, tetA, and qnrS corresponding to commonly used antibiotics aminoglycosides, β-lactams, amphenicols, macrolides-lincosamides-streptogramins, sulfonamides-trimethoprim, tetracyclines, and quinolones, respectively. Seasonal abundance of overall genes and ARGs in influents and effluents of each WWTPs was determined by quantitative polymerase chain reaction. Membrane bioreactor and package MBR systems showed the highest removal efficiency up to 5-log reductions. Seasonal changes affected ARG removal efficiencies of BNR and CAS significantly (p < 0.05). The lowest log reductions were determined in summer for BNR and in both autumn and winter for CAS. The abundance of the genes increased in sludge treatment of CAS. In all WWTPs tested, ARG removal rates were correlated with the 16S rDNA gene removal (p > 0.05). The results elucidated that the removal mechanism was not ARG-specific. PRACTITIONER POINTS: Removal of genes in WWTPs was found to be not ARG-specific. MBR and package MBR systems had the highest gene removal efficiencies. Effluents of the MBR systems still retained up to 10⁴  gene copy number/ml. Removal of genes in CAS and BNR systems showed seasonal variations. The copy numbers of the genes increased in the sludge of CAS.

Untreated HWWs Emerged as Hotpots for ARGs

Hospital wastewaters (HWWs) are reported to be hotspots for antibiotics and antibiotic-resistant bacteria. However, limited information involves the impact of these effluents on dissemination of antibiotic-resistance genes (ARGs). In this study, therefore, seasonally collected HWWs were monitored for overall bacterial load and seven ARGs aadA, tetA, cmlA, sul1, qnrS, ermB and bla _CTX-M by using quantitative polymerase chain reaction method. Overall bacterial 16S rRNA copy number was found to be the lowest in winter with 10³ copy number/mL, while the highest copy number, with 10⁵ copy number/mL, was observed in both summer and spring. All hospitals tested displayed similar seasonal ARG copy number profile of aadA > tetA > cmlA ≈ sul1 > ermB ≈ qnrS > bla _CTX-M. The results indicated that untreated HWWs were hotspots for ARGs and required attention before discharging into public sewer.

Distribution and co-occurrence of antibiotic and metal resistance genes in biofilms of an anthropogenically impacted stream

Urban stream biofilms are potential hotspots for resistomes and antibiotic resistance genes (ARGs). Biofilm communities that harbor resistance genes may be influenced by contaminant input (e.g., metals and antibiotics) from urban drainage (i.e., Wastewater Treatment Plant effluent and stormwater runoff); understanding the ecology of these communities and their resistome is needed. Given the potential importance of the co-occurrence of ARGs and metal resistance genes (MRGs), we investigated the spatial and temporal distribution of three ARGs (tetracycline [tetW] and sulfonamides [sulI and sulII]), four MRGs (lead [pbrT], copper [copA], and cadmium/cobalt/zinc [czcA and czcC]) via quantitative PCR and biofilm bacterial community composition via MiSeq 16S sequencing at four time points along an urbanization gradient (i.e., developed, agriculture, and forested sites) in a stream's watershed. Our results revealed that ARG and MRG abundances were significantly affected by land use-time interaction, with greater resistance abundances occurring in more urban locations during particular times of the year. It was also observed that changes in ARG and MRG profiles were influenced by differences in community composition among land use types, and that these differences were in response to changes in stream physicochemical parameters (pH, redox, temperature, nutrient availability, and metal concentration) that were driven by sub-watershed land use. Moreover, the dynamics between ARGs and MRGs within these communities correlated strongly and positively with one another. Taken altogether, our results demonstrate that changes in environmental properties due to human activity may drive the ARG-MRG profiles of biofilm communities by modulating community structure over time and space.

Copper tolerance and antibiotic resistance in soil bacteria from olive tree agricultural fields routinely treated with copper compounds

BACKGROUND

Heavy metal pollution may act as persistent selective pressure that favors the spread of antimicrobial resistance in natural environments. The aim of this study was to isolate and identify metal-tolerant bacteria from soils in olive tree fields routinely treated with copper-derived compounds and to evaluate the tolerance of bacterial strains to other metals and their resistance to clinically relevant antibiotics.

RESULTS

Five hundred and ninety-five bacterial isolates from 45 olive tree agricultural fields were studied. Minimum inhibitory concentrations (MICs) ≥ 16 mmol L^-1 were detected for copper (57% of isolates), zinc (37%) and lead (62%), while only 3% had MICs ≥ 12 mmol L^-1 for nickel. Ninety-six metal-tolerant strains were selected for identification and antibiotic resistance determination. Most isolates belonged to the genera Pseudomonas (37%), Bacillus (23%) and Chryseobacterium (20%), while 6% were identified as Variovorax, 4% as Stenotrophomonas and 2% as Serratia or Burkholderia. Highest copper tolerance was detected among Pseudomonas. Over 75% of the strains with high copper tolerance were also resistant to vancomycin, 50% to ampicillin and 40% to erythromycin or trimethoprim/sulfamethoxazole.

CONCLUSION

Bacteria from olive soils are tolerant to metals, mainly copper, but also zinc and lead, as well as resistant to clinically important antibiotics, which could be a troublesome issue in clinical settings. © 2019 Society of Chemical Industry.

Antibiotic resistance and heavy metal tolerance in cultured bacteria from hot springs as indicators of environmental intrinsic resistance and tolerance levels

Antibiotic resistance (AR) in the environment is a growing and global concern for public health, and intrinsic AR from pristine sites untouched by pharmaceutical antibiotics is not commonly studied. Forty aerobic bacteria were isolated from water and sediment samples of hot springs in South Africa. Resistance against ten antibiotics (carbenicillin, gentamicin, kanamycin, streptomycin, tetracycline, chloramphenicol, ceftriaxone, co-trimoxazole, nalidixic acid and norfloxacin) was tested using a standard disk diffusion assay. Resistance to one or two antibiotics were equally found in 37.5%, while the remaining 22% showed complete sensitivity. Intermediate resistance was found for ceftriaxone (52.5%), nalidixic acid (37.5%) and carbenicillin (22.5%), while low levels of resistance were observed for streptomycin (5%) and kanamycin (2.5%), and total sensitivity towards the other antibiotics. Twenty-nine isolates were also tested against eight different heavy-metal salts (Al, Cr, Cu, Fe, Hg, Mn, Ni and Pb) at 10 and 40 mM. All isolates were tolerant and able to grow on ≥2 heavy-metal salts at both concentrations. No association was observed between AR and heavy metal tolerance (HMT). Based on the relatively low AR levels, hot spring sites are pristine environments reflecting baseline levels for comparison to other potentially contaminated groundwater sites.

Impact of heavy metals on inhibitory concentration of Escherichia coli-a case study of river Yamuna system, Delhi, India

The occurrence of resistant bacteria to specific heavy metals can be associated with increasing load of the metals in the environment. River Yamuna is polluted by various toxic heavy metals discharged by several industrial and agricultural sources. Therefore, the use of heavy metal-resistant bacteria as an indicator of metal pollution was tested in the present study. For the purpose of the study, the heavy metal resistance status of 42 Escherichia coli strains isolated from River Yamuna water from 7 sampling sites within a span of 2 years was determined using growth curves and plate dilution method in terms of minimum inhibitory concentration (MIC) values by comparing with MIC value of control strain. Seasonally, the lowest mean MIC value was observed for bacterial strains isolated in post-monsoon (December) 2013 and highest mean MIC value was observed for bacterial strains isolated in monsoon (August) 2015. Site-wise analysis of the maximum mean MIC values for all the isolated strains showed the highest mean Ni MIC value for the bacterial strains isolated from site S4 (ITO), highest mean Cu MIC, Cr MIC, and Fe MIC values for the bacterial strains isolated from site S2 (Najafgarh drain intermixing zone) and highest mean Cd MIC, Pb MIC, and Zn MIC values for the bacterial strains isolated from site S7 (Shahdara drain intermixing zone). Correlation analysis between mean MIC site-wise results with mean heavy metal site-wise concentrations showed significant positive correlation indicating that the higher the mean concentration of a given heavy metal at a given site, the higher the mean MIC value for the strains isolated from the same site indicating higher level of resistance. Overall, the present study has shown that the presence of heavy metals in River Yamuna caused due to indiscriminate discharge of various effluents from different kind of sources as well as due to insufficient treatment capacity of sewage treatment plants as well as common effluent treatment plants, has serious impacts on its bacterial microflora as it leads to the development of resistant strains.

Co-selection of antibiotic resistance via copper shock loading on bacteria from a drinking water bio-filter

Heavy metal contamination of source water frequently occurred in developing countries as a result of accidents. To address the problems, most of the previous studies have focused on engineering countermeasures. In this study, we investigated the effects of heavy metals, particularly copper, on the development of antibiotic resistance by establishing a copper shock loading test. Results revealed that co-selection occurred rapidly within 6 h. Copper, at the levels of 10 and 100 mg/L, significantly increased bacterial resistance to the antibiotics tested, including rifampin, erythromycin, kanamycin, and a few others. A total of 117 antimicrobial-resistance genes were detected from 12 types of genes, and the relative abundance of most genes (particularly mobile genetic elements intⅠand transposons) was markedly enriched by at least one fold. Furthermore, the copper shock loading altered the bacterial community. Numerous heavy metal and antibiotic resistant strains were screened out and enriched. These strains are expected to enhance the overall level of resistance. More noticeably, the majority of the co-selected antibiotic resistance could sustain for at least 20 h in the absence of copper and antimicrobial drugs. Resistance to vancomycin, erythromycin and lincomycin even could remain for 7 days. The prominent selection pressure by the copper shock loading implies that a real accident most likely poses similar impacts on the water environment. An accidental release of heavy metals would not only cause harm to the ecological environment, but also contribute to the development of bacterial antibiotic resistance. Broader concerns should be raised about the biological risks caused by sudden releases of pollutants by accidents.

Strategies to Combat Antibiotic Resistance in the Wastewater Treatment Plants

The main goal of this manuscript is to review different treatment strategies and mechanisms for combating the antibiotic resistant bacteria (ARB) and antibiotic resistant genes (ARGs) in the wastewater environment. The high amount of antibiotics is released into the wastewater that may promote selection of ARB and ARGs which find their way into natural environments. Emerging microbial pathogens and increasing antibiotic resistance among them is a global public health issue. The propagation and spread of ARB and ARGs in the environment may result in an increase of antibiotic resistant microbial pathogens which is a worldwide environmental and public health concern. A proper treatment of wastewater is essential before its discharge into rivers, lake, or sewage system to prevent the spread of ARB and ARGs into the environment. This review discusses various treatment options applied for combating the spread of ARB and ARGs in wastewater treatment plants (WWTPs). It was reported that low-energy anaerobic-aerobic treatment reactors, constructed wetlands, and disinfection processes have shown good removal efficiencies. Nanomaterials and biochar combined with other treatment methods and coagulation process are very recent strategies regarding ARB and ARGs removal and need more investigation and research. Based on current studies a wide-ranging removal efficiency of ARGs can be achieved depending on the type of genes present and treatment processes used, still, there are gaps that need to be further investigated. In order to find solutions to control dissemination of antibiotic resistance in the environment, it is important to (1) study innovative strategies in large scale and over a long time to reach an actual evaluation, (2) develop risk assessment studies to precisely understand occurrence and abundance of ARB/ARGs so that their potential risks to human health can be determined, and (3) consider operating and environmental factors that affect the efficiency of each treatment mechanism.

Antimicrobial and anti-biofilm properties of polypropylene meshes coated with metal-containing DLC thin films

A promising strategy to reduce nosocomial infections related to prosthetic meshes is the prevention of microbial colonization. To this aim, prosthetic meshes coated with antimicrobial thin films are proposed. Commercial polypropylene meshes were coated with metal-containing diamond-like carbon (Me-DLC) thin films by the magnetron sputtering technique. Several dissimilar metals (silver, cobalt, indium, tungsten, tin, aluminum, chromium, zinc, manganese, tantalum, and titanium) were tested and compositional analyses of each Me-DLC were performed by Rutherford backscattering spectrometry. Antimicrobial activities of the films against five microbial species (Candida albicans, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Enterococcus faecalis) were also investigated by a modified Kirby-Bauer test. Results showed that films containing silver and cobalt have inhibited the growth of all microbial species. Tungsten-DLC, tin-DLC, aluminum-DLC, zinc-DLC, manganese-DLC, and tantalum-DLC inhibited the growth of some strains, while chromium- and titanium-DLC weakly inhibited the growth of only one tested strain. In-DLC film showed no antimicrobial activity. The effects of tungsten-DLC and cobalt-DLC on Pseudomonas aeruginosa biofilm formation were also assessed. Tungsten-DLC was able to significantly reduce biofilm formation. Overall, the experimental results in the present study have shown new approaches to coating polymeric biomaterials aiming antimicrobial effect.

vanA Gene Harboring Enterococcal and Non-enterococcal Isolates Expressing High Level Vancomycin and Teicoplanin Resistance Reservoired in Surface Waters

Untreated wastewaters and treated effluents even after final disinfection contain antibiotic resistant bacteria and resistance genes before they are released into surface waters. A correlation between resistant bacteria and antibiotics in surface waters has been found, as have antibiotic resistance genes. Of particular interest are vancomycin-resistant enterococci harboring vanA gene that confers high level of resistance to glycopeptide antibiotics including teicoplanin. Therefore, in this study, river water samples were analysed to investigate vancomycin- and teicoplanin-resistant bacterial isolates harboring vanA gene. Out of 290, 15 surface water isolates displayed resistance to both antibiotics. These glycopeptide resistant enterococcal and non-enterococcal isolates, identified by 16S rRNA sequencing, were found to harbor vanA gene with sequence similarities of 50 % to 100 %. The presence of D-alanine-D-lactate ligase encoded by vanA gene was also shown for all vancomycin- and teicoplanin-resistant isolates through western blot analysis. Due to reuse of treated wastewater and release of untreated wastewaters to water bodies, antibiotic resistant bacteria and resistance genes are being introduced into surface waters and present human health risks. Therefore, surface waters are not only hot spots for vanA harboring enterococcal isolates but also non-enterococcal isolates due to gene dissemination and require special scientific consideration.

VanA-Type MRSA (VRSA) Emerged in Surface Waters

Due to the widespread occurrence of mecA-encoded methicillin resistance in Staphylococcus aureus (MRSA), treatment of staphylococcal infections is shifted to glycopeptide antibiotics like vancomycin and teicoplanin. The selective pressure of glycopeptides has eventually led to the emergence of staphylococci with increased resistance. Of great concern is vanA-encoded high level vancomycin and teicoplanin resistance in MRSA (VRSA). Therefore, this study aimed at investigating the occurrence of VRSA in surface waters. Out of 290, two staphylococcal isolates identified as MRSA Al11, Ba01, and one as MRS Co11 through 16S rRNA sequencing, also displayed high level resistance towards vancomycin and teicoplanin. These staphylococcal isolates were found to harbor vanA gene with sequence similarities of 99 %-100 % to the vanA gene extracted from vancomycin- and teicoplanin-resistant enterococcal (VRE) surface water isolates of Enterococcus faecalis Cr07, E07, Pb06 and E. faecium E330. High level glycopeptide resistance rendering protein encoded by the vanA gene, D-alanine-D-lactate ligase found in VRE, was also shown to be present in all vanA-type staphylococcal isolates through western blot. Current study elucidated that surface waters provide high potential for enterococcal vanA gene being transferred to MRSA, so called VRSA, and require special scientific consideration.

A Comprehensive Analysis on Spread and Distribution Characteristic of Antibiotic Resistance Genes in Livestock Farms of Southeastern China

The pollution of antibiotic resistance genes (ARGs) in livestock farms is a problem which need to be paid more attention to, due to the severe resistance dissemination and the further human health risk. In this study, all the relevant exposure matrices (manure, soil and water) of sixteen animal farms in Southeastern China were sampled to determine twenty-two ARGs conferring resistance to five major classes of antibiotics including tetracyclines, sulfonamides, quinolones, aminoglycosides, and macrolides. The results showed that the spread property of sul genes was most extensive and strong, followed by tet and erm genes. The abundance of tet genes expressing ribosomal protection proteins (tetM, tetO, tetQ, tetT and tetW) was higher than that expressing efflux pump proteins (tetA, tetC, tetE and tetG) in each type of samples. The high abundance and frequency of ermB gene in the matrices should be paid more attention, because macrolides is a major medicine for human use. For manures, it was found that the similar ARGs distribution rules were existing in poultry manure or porcine manure samples, despite of the different origins of these two types of livestock farms. Meanwhile, it was interesting that the distribution rule of tet genes in animal manure was nearly the same as all the ARGs. For soils, the result of nonmetric multi-dimensional scaling (NMDS) analysis showed that the pollution of ARGs in the soils fertilized by poultry and cattle manures were more substantial in northern Jiangsu, but no significant ARGs diversity was observed among porcine manured soils of five different regions. Furthermore, most ARGs showed significant positive relationships with environmental variables such as concentration of sulfonamides, tetracyclines, Cu, Zn and total organic carbon (TOC). The pollution profile and characteristics of so many ARGs in livestock farms can provide significative foundation for the regulation and legislation of antibiotics in China.

Use of cadA-Specific Primers and DNA Probes as Tools to Select Cadmium Biosorbents with Potential in Remediation Strategies

Biosorption, using cadmium-resistant bacterial isolates, is often regarded as a relatively inexpensive and efficient way of cleaning up wastes, sediments, or soils polluted with cadmium. Therefore, many efforts have been devoted to the isolation of cadmium-resistant isolates for the efficient management of cadmium remediation processes. However, isolation, identification and in situ screening of efficient cadmium-resistant isolates are primary challenges. To overcome these challanges, in this study, cadA, cadmium resistance coding gene, specific primers and DNA probes were used to identify and screen cadmium-resistant bacteria in the cadmium-polluted river waters through polymerase chain reaction (PCR) and fluorescein in situ hybridization (FISH). PCR amplification of the cadA amplicon coupled with 16S rRNA sequencing revealed various gram-positive and -negative bacterial isolates harboring cadA. Accordingly, a cadA-mediated DNA probe was prepared and used for in situ screening of cadmium-resistant isolates from water samples collected from cadmium-polluted river waters. The FISH analyses of cadA probe showed highly specific and efficient hybridization with cadA harboring isolates. The use of primers and DNA probes specific for cadA gene seems to be very helpful tools for the selection and screening of cadmium biosorbents with potential to be used in the remediation of cadmium-polluted sites.

Toxicity Appraisal of Untreated Dyeing Industry Wastewater Based on Chemical Characterization and Short Term Bioassays

Characterizing wastewaters only on a chemical basis may be insufficient owing to their complex nature. The purpose of this study was to assess toxicity of textile dyeing wastewater based on analytical techniques and short term toxicity based bioassays. In this study, screening of the fractionated wastewater through GC-MS showed the presence of phenols, phthalic acid derivatives and chlorpyrifos. Metal analysis revealed that chromium, arsenic and mercury were present in amounts higher than the wastewater discharge limits. Textile dyeing wastewater was found to be highly mutagenic in the Ames test. DNA damage in sheep lymphocytes decreased linearly with an increase in the dilution of wastewater. MTT assay showed that 8.3 percent v/v wastewater decreased cell survival percentage to 50 %. It can be concluded from this study that short term toxicity tests such as Ames test, in vitro comet assay, and cytotoxicity assays may serve as useful indicators of wastewater pollution along with their organic and inorganic chemical characterizations.