Computer-assisted navigation is beneficial both in primary and revision surgery with modular rotating-hinge knee arthroplasty

Reconstruction of mechanical leg axis using non-modular cemented hinged prosthesis in complex primary total knee arthroplasty

PURPOSE

Modular cementless knee arthroplasty systems are capable of precise reconstruction of the mechanical axis. However, they are considered more susceptible to complications. In contrast, non-modular cemented systems are said to be more forgiving and show good long-term results. The aim of this study was to investigate the resulting leg axis after implantation of a non-modular cemented rotating hinged knee prosthesis. Furthermore, potential risk factors for the occurrence of malalignment and complications should be identified.

METHODS

Between 2005 and 2015, 115 patients could be included in this monocentric retrospective cohort study. All patients underwent primary hinged non-modular cemented total knee arthroplasty. Preoperative and postoperative standardized long radiographs were analysed to determine resulting leg axis. Furthermore, epidemiological and intraoperative data as well as perioperative complications were surveyed.

RESULTS

Average leg axis was 5.8° varus preoperatively and 0.6° valgus postoperatively. Considering an axis deviation of 3° as the target corridor, 27% of all cases examined were outside the desired range. 21% cases showed a femoral deviation from the target corridor and 15% showed a tibial deviation. There was a significant relationship between the preoperative mLDFA and the mechanical alignment of the femoral component (R = 0.396, p < 0.001) as well as between the preoperative mMPTA and the mechanical alignment of the tibial component (R = 0.187, p = 0.045). The mean operative duration was 96 min. No periprosthetic fractures were observed within the study cohort.

CONCLUSION

The main result of the present work is that a non-modular cemented rotating hinged knee arthroplasty system can reconstruct the mechanical leg axis precisely and comparable to modular cementless and unconstrained total knee prostheses. Component malalignment is primarily dependent upon extraarticular deformity preoperatively. Periprosthetic fracture rates and duration of surgery were lower compared with current literature.

LEVEL OF EVIDENCE

Level III: Retrospective cohort study.

Next step trauma and orthopaedic surgery: integration of augmented reality for reduction and nail implantation of tibial fractures

INTRODUCTION

There is a tremendous scope of hardware and software development going on in augmented reality (AR), also in trauma and orthopaedic surgery. However, there are only a few systems available for intra-operative 3D imaging and guidance, most of them rely on peri- and intra-operative X-ray imaging. Especially in complex situations such as pelvic surgery or multifragmentary multilevel fractures, intra-operative 3D imaging and implant tracking systems have proven to be of great advantage for the outcome of the surgery and can help reduce X-ray exposure, at least for the surgical team (Ochs et al. in Injury 41:1297 1305, 2010). Yet, the current systems do not provide the ability to have a dynamic live view from the perspective of the surgeon. Our study describes a prototype AR-based system for live tracking which does not rely on X-rays.

MATERIALS AND METHODS

A protype live-view intra-operative guidance system using an AR head-mounted device (HMD) was developed and tested on the implantation of a medullary nail in a tibia fracture model. Software algorithms that allow live view and tracking of the implant, fracture fragments and soft tissue without the intra-operative use of X-rays were derived.

RESULTS

The implantation of a medullar tibia nail is possible while only relying on AR-guidance and live view without the intra-operative use of X-rays.

CONCLUSIONS

The current paper describes a feasibility study with a prototype of an intra-operative dynamic live tracking and imaging system that does not require intra-operative use of X-rays and dynamically adjust to the perspective of the surgeons due to an AR HMD. To our knowledge, the current literature does not describe any similar systems. This could be the next step in surgical imaging and education and a promising way to improve patient care.

Rotating Hinge Prosthesis for Primary and Revision Knee Arthroplasty: Comparison and Indications

Background. Rotating hinge knee prostheses are typically used in revision and severe primary total knee arthroplasty (TKA). For these challenging patient groups, currently only few studies with mid- or even long-term follow-up and adequate patient numbers are available. In addition, a more specific definition is needed of the indications for a rotating hinge prothesis in primary patients beyond the use in bone defects. Methods. In this prospective study, 170 primary and 62 revision TKA patients were included who received a rotating hinge knee prosthesis at the study centre between the years 2009 and 2014. Of these, 98 primary and 22 revision TKA patients were available for 5-year functional and clinical follow-up examinations. Prosthesis survival in both patient groups could be compared up to a 9-year follow-up. Results. Postoperatively, functional results including range of motion (ROM) and clinical scores like the Oxford Knee Score (OKS) and subscales of the Knee Society Score (KSS) improved better in patients treated for primary knee arthroplasty than for revision patients. Besides the patient group (primary vs. revision TKA), no overall influencing factors (age, body mass index, gender, etc.) regarding functional results could be identified in a multiple linear regression analysis. The revision rate of primary patients was significantly lower than in the revision patients, with an 8-year Kaplan-Meier prosthesis survival of 88% in the Primary and 60% in the Revision group. Conclusion. The prosthesis provides promising results in severe primary and revision knee arthroplasty. In addition to commonly agreed recommendations regarding the use of rotating hinge knee prostheses for primary surgery, six specific indications are proposed and discussed here as a base for scientific debate.

Hot spots and trends in knee revision research since the 21st century: a bibliometric analysis

Background

With the popularization of knee replacement surgery in the treatment of the advanced lesions of knee joint, the amount of knee revision surgery is increasing unceasingly. Meanwhile, the continuous introduction of new clinical concepts and new technology poses a challenge to researchers and surgeons. Our study aims to inform the future scientific research and clinical treatment, by investigating the hot spots and trends of the knee revision research field with the method of bibliometric analysis.

Methods

Publications on knee revision included in the database of Web of Science Core Collection (WoSCC) between 2000 and 2018 were reviewed and MeSH terms of them were extracted from PubMed. Online bibliometric analysis website (http://bibliometric.com/), two pieces of software called “CiteSpace” and “Bibliographic Item Co-Occurrence Matrix Builder” (BICOMB) were used to analyze the publications reviewed at quantitative level. Another piece of software called “gCLUTO”, was used to investigate the hot spots with visualization techniques at qualitative level.

Results

A total of 906 publications were retrieved between 2000 and 2018. There is an increasing number of publications, from 15 in 2000 to 86 in 2018. Journal of Arthroplasty is the leading journal which has the most publications on knee revision. The United States has been the biggest contributor. Mayo Clinic became the leader among the institutions which have conducted correlational researches. David G. Lewallen, Robert L. Barrack and Michael A. Mont should be regarded as the scholars who have made outstanding contribution. Hot spots were summed up in six clusters, respectively, the solutions for infection, prostheses, the adverse effects, the surgical techniques, epidemiological characters, and the pathophysiology of the revision knee.

Conclusions

We found a growing trend in knee revision research and extracted the most contributive researchers, institutions, countries, journals, and most-cited articles worldwide. The solutions for complications, surgical applications and analysis for epidemiological characters have been the hot spots. Multi-disciplinary integration is becoming the time-trend of hot spots. Minimally invasive and navigation are directions of revision surgery. They together constitute a solid foundation and set up a fingerpost for the future scientific research and clinical treatment.

Accuracy assessment of target tracking using two 5-degrees-of-freedom wireless transponders

Purpose

Surgical navigation systems are generally only applied for targets in rigid areas. For non-rigid areas, real-time tumor tracking can be included to compensate for anatomical changes. The only clinically cleared system using a wireless electromagnetic tracking technique is the Calypso^® System (Varian Medical Systems Inc., USA), designed for radiotherapy. It is limited to tracking maximally three wireless 5-degrees-of-freedom (DOF) transponders, all used for tumor tracking. For surgical navigation, a surgical tool has to be tracked as well. In this study, we evaluated whether accurate 6DOF tumor tracking is possible using only two 5DOF transponders, leaving one transponder to track a tool.

Methods

Two methods were defined to derive 6DOF information out of two 5DOF transponders. The first method uses the vector information of both transponders (TTV), and the second method combines the vector information of one transponder with the distance vector between the transponders (OTV). The accuracy of tracking a rotating object was assessed for each method mimicking clinically relevant and worst-case configurations. Accuracy was compared to using all three transponders to derive 6DOF (Default method). An optical tracking system was used as a reference for accuracy.

Results

The TTV method performed best and was as accurate as the Default method for almost all transponder configurations (median errors < 0.5°, 95% confidence interval < 3°). Only when the angle between the transponders was less than 2°, the TTV method was inaccurate and the OTV method may be preferred. The accuracy of both methods was independent of the angle of rotation, and only the OTV method was sensitive to the plane of rotation.

Conclusion

These results indicate that accurate 6DOF tumor tracking is possible using only two 5DOF transponders. This encourages further development of a wireless EM surgical navigation approach using a readily available clinical system.

Accuracy assessment of wireless transponder tracking in the operating room environment

PURPOSE

To evaluate the applicability of the Calypso^® wireless transponder tracking system (Varian Medical Systems Inc., USA) for real-time tumor motion tracking during surgical procedures on tumors in non-rigid target areas. An accuracy assessment was performed for an extended electromagnetic field of view (FoV) of 27.5 × 27.5 × 22.5 cm (which included the standard FoV of 14 × 14 × 19 cm) in which 5DOF wireless Beacon^® transponders can be tracked.

METHODS

Using a custom-made measurement setup, we assessed single transponder relative accuracy, absolute accuracy and jitter throughout the extended FoV at 1440 locations interspaced with 2.5 cm in each orthogonal direction. The NDI Polaris Spectra optical tracking system (OTS) was used as a reference. Measurements were taken in a room without surrounding distorting factors and repeated in an operating room (OR). In the OR, the influence of a carbon fiber and regular stainless steel OR tabletop was investigated.

RESULTS

The calibration of the OTS and transponder system resulted in an average root-mean-square error (RMSE) vector of 0.03 cm. For both the standard and extended FoV, all accuracy measures were dependent on transponder to tracking array (TA) distances and the absolute accuracy was also dependent on TA to OR tabletop distances. This latter influence was reproducible, and after calibrating this, the residual error was below 0.1 cm RMSE within the entire standard FoV. Within the extended FoV, this residual RMSE did not exceed 0.1 cm for transponder to TA distances up to 25 cm.

CONCLUSION

This study shows that transponder tracking is promising for accurate tumor tracking in the operating room. This applies when using the standard FoV, but also when using the extended FoV up to 25 cm above the TA, substantially increasing flexibility.