Probing affinity via capillary electrophoresis: advances in 2003–2004

Capillary electrophoresis analysis of affinity to assess carboxylation of multi-walled carbon nanotubes

Surface oxidation improves the dispersion of carbon nanotubes in aqueous solutions and plays a key role in the development of biosensors, electrochemical detectors and polymer composites. Accurate characterization of the carbon nanotube surface is important because the development of these nano-based applications depends on the degree of functionalization, in particular the amount of carboxylation. Affinity capillary electrophoresis is used to characterize the oxidation of multi-walled carbon nanotubes. A polytryptophan peptide that contains a single arginine residue (WRWWWW) serves as a receptor in affinity capillary electrophoresis to assess the degree of carboxylation. The formation of peptide-nanotube receptor-ligand complex was detected with a UV absorbance detector. Apparent dissociation constants (K_D) are obtained by observing the migration shift of the WRWWWW peptide through background electrolyte at increasing concentrations of multi-walled carbon nanotubes. A 20% relative standard deviation in method reproducibility and repeatability is determined with triplicate analysis within a single sample preparation and across multiple sample preparations for a commercially available carbon nanotube. Affinity capillary electrophoresis is applied to assess differences in degree of carboxylation across two manufacturers and to analyze acid treated carbon nanotubes. The results of these studies are compared to X-ray photoelectron spectroscopy and zeta potential. Affinity capillary electrophoresis comparisons of carbon nanotube samples prepared by varying acid treatment time from 30 min to 3 h yielded significant differences in degree of carboxylation. X-ray photoelectron spectroscopy analysis was inconclusive due to potential acid contamination, while zeta potential showed no change based on surface charge. This work is significant to research involving carbon nanotube-based applications because it provides a new metric to rapidly characterize carbon nanotubes obtained from different vendors, or synthesized in laboratories using different procedures.

Enhancing the Affinity of Anti-Human α-Thrombin 15-mer DNA Aptamer and Anti-Immunoglobulin E Aptamer by PolyT Extension

Aptamer affinity capillary electrophoresis-laser-induced fluorescence (CE-LIF) for protein detection takes advantage of aptamers for their ease of synthesis and labeling, small size, and having many negative charges. Its success relies on the high binding affinity of aptamers. One 15-mer DNA aptamer (5'-GGT TGG TGT GGT TGG-3', Apt15) shows desirable specificity for human α-thrombin, an important enzyme with multiple functions in blood. However, Apt15 has weak binding affinity, and the use of Apt15 in affinity CE-LIF analysis remains challenging. Here we reported that extension of Apt15 at the 3'-end with a polyT tail having length of 18 T or longer significantly enhanced its affinity and enabled a well-isolated and stable peak for thrombin-aptamer complex in affinity CE. It was likely that the improvement of binding affinity resulted from double binding, an additional interaction of the polyT tail with thrombin in addition to the Apt15 section binding to thrombin. With dye-labeled Apt15 having a T₂₅ tail, we achieved detection of thrombin at concentrations as low as 0.1 nM by affinity CE-LIF. This aptamer probe specifically bound to human α-thrombin, showing negligible affinity for human β- and γ-thrombin, which are proteolyzed derivatives of human alpha α-thrombin and share similar structure. This strategy of adding a polyT extension also enhanced the binding affinity of anti-immunoglobulin E aptamer in CE-LIF analysis, showing that the affinity enhancement approach is not limited to the thrombin-binding aptamer and has potential for more applications in bioanalysis.

Affinity capillary electrophoresis with laser induced fluorescence detection for thrombin analysis using nuclease-resistant RNA aptamers

Aptamer affinity capillary electrophoresis coupled with laser-induced fluorescence (CE-LIF) combines the advantages of affinity aptamer, rapid CE separation, and high sensitivity detection. Here we reported an affinity CE-LIF assay for thrombin by using a fluorophore-labeled RNA aptamer containing 2'-fluoro modification in sugar rings of pyrimidine nucleotides (C and U) as affinity ligand. This RNA aptamer has high binding affinity, specificity and biostability. Thrombin at 0.2nM was successfully detected. This RNA aptamer allowed for the detection of thrombin spiked in diluted human serum sample due to the nuclease resistance. The RNA aptamer has comparable binding affinity to a 29-mer DNA aptamer for thrombin, and the binding site of the RNA aptamer on thrombin partially overlaps with the binding site of the 29-mer DNA aptamer on thrombin. It shows the nuclease-resistant RNA aptamers are promising in assays for thrombin.

Affinity Capillary Electrophoresis for Selective Control of Electrophoretic Mobility of Sialic Acid Using Lanthanide-Hexadentate Macrocyclic Polyazacarboxylate Complexes

It is difficult to control the electrophoretic mobility in order to obtain high resolution among saccharides in complex samples. We report herein on a new affinity capillary electrophoresis (ACE) method for an anionic monosaccharide, N-acetylneuraminic acid (Neu5Ac), which is important in terms of pathological diagnosis, using lanthanide-hexadentate macrocyclic polyazacarboxylate complexes (Ln-NOTA) as affinity reagents. It was shown that Ln-NOTA complexes increased the anionic mobility of Neu5Ac by approximately 40% through selective complexation with Neu5Ac. The extent of change in the mobility strongly depended on the type of central metal ion of Ln-NOTA. The stability constant (K) of Lu-NOTA with Neu5Ac was determined by ACE to be log Kb = 3.62 ± 0.04, which is the highest value among artificial receptors for Neu5Ac reported so far. Using this ACE, the Neu5Ac content in a glycoprotein sample, α1-acid glycoprotein (AGP), was determined after acid hydrolysis. Complete separation between Neu5Ac and hydrolysis products was successful by controlling the mobility to determine the concentration of Neu5Ac.

Determination of binding constants by affinity capillary electrophoresis, electrospray ionization mass spectrometry and phase-distribution methods

Many methods for determining intermolecular interactions have been described in the literature in the past several decades. Chief among them are methods based on spectroscopic changes, particularly those based on absorption or nuclear magnetic resonance (NMR) [especially proton NMR ((1)H NMR)]. Recently, there have been put forward several new methods that are particularly adaptable, use very small quantities of material, and do not place severe requirements on the spectroscopic properties of the binding partners. This review covers new developments in affinity capillary electrophoresis, electrospray ionization mass spectrometry (ESI-MS) and phasetransfer methods.

Probing interactions by means of pulsed field gradient nuclear magnetic resonance spectroscopy

Molecular self-diffusion coefficients (D) of species in solution are related to size and shape and can be used for studying association phenomena. Pulsed field gradient nuclear magnetic resonance (PFG-NMR) spectroscopy has been revealed to be a powerful analytical tool for D measurement in different research fields. The present work briefly illustrates the use of PFG-NMR for assessing the existence of interactions in very different chemical systems: organic and organometallic compounds, colloidal materials and biological aggregates. The application of PFG-NMR is remarkable for understanding the role of anions in homogenous transition metal catalysis and for assessing the aggregation behaviour of biopolymers in material science.

Recent developments in CE and CEC of peptides

The article brings a comprehensive survey of recent developments and applications of high-performance capillary electromigration methods, zone electrophoresis, ITP, IEF, affinity electrophoresis, EKC, and electrochromatography, to analysis, preparation, and physicochemical characterization of peptides. New approaches to the theoretical description and experimental verification of electromigration behavior of peptides and to methodology of their separations, such as sample preparation, adsorption suppression, and detection, are presented. Novel developments in individual CE and CEC modes are shown and several types of their applications to peptide analysis are presented: conventional qualitative and quantitative analysis, purity control, determination in biomatrices, monitoring of chemical and enzymatical reactions and physical changes, amino acid and sequence analysis, and peptide mapping of proteins. Some examples of micropreparative peptide separations are given and capabilities of CE and CEC techniques to provide important physicochemical characteristics of peptides are demonstrated.

Electrophoretic screening of ligands under suppressed EOF with an inert phospholipid coating

The applicability of dual injection CE for affinity selection of biopolymers that contain multiple binding sites is demonstrated. The efficient analysis of biomolecules such as carbohydrates and proteins, as well as pharmaceuticals by CE requires the reduction or elimination of nonspecific interactions with the capillary surface. Phospholipids are integral components of cell membranes and aqueous phospholipid liquid crystals adopt a bilayer structure on fused-silica. This phospholipid surface does not interact significantly with the following biomolecules: serum albumin, the 96-110 heparin binding domain of amyloid precursor protein (APP), polydisperse glycosaminoglycans, and variable chain-length oligosaccharides. Pharmaceuticals including five anionic nonsteroidal anti-inflammatory drugs, three cationic analgesics, and two cationic beta-blockers, also show minimal interaction with the surface. In addition, the use of a phospholipid coating suppresses EOF, which enables reversed-polarity separations, dual opposite injection CE, affinity screening via CE by dual opposite injection, and serial target-ligand injections.

Stability constants of amino acids, peptides, proteins, and other biomolecules determined by CE and related methods: Recapitulation of published data

The stability (affinity, association, binding, complexation, formation) constant characterizes binding interaction between the analyte and the complexing agent. Knowledge of the stability constant makes possible the prediction and estimation of the binding behavior of constituents (amino acids, peptides, proteins, drugs, antibiotics, enzymes, enantiomers) to their partners, and the finding of a suitable partner for the given analyte to form a stable complex. The present paper summarizes the stability constant determination methods and the approaches used to evaluate the experimental data. Further, the paper recapitulates the published stability constant values determined, mainly, by capillary electrophoretic methods, taken from the Web of Science database covering the last decade. Details of the experimental conditions employed for the determination of the stability constants are also given. The review attempts to give a critical evaluation of the problems that accompany the determination of stability constant and discusses their solution.

Selection of smart aptamers by methods of kinetic capillary electrophoresis

We coin the term "smart aptamers" -- aptamers with predefined binding parameters (k(on), k(off), Kd) of aptamer-target interaction. Aptamers, in general, are oligonucleotides, which are capable of binding target molecules with high affinity and selectivity. They are considered as potential therapeutic targets and also thought to rival antibodies in immunoassay-like analyses. Aptamers are selected from combinatorial libraries of oligonucleotides by affinity methods. Until now, technological limitations have precluded the development of smart aptamers. Here, we report on two kinetic capillary electrophoresis techniques applicable to the selection of smart aptamers. Equilibrium capillary electrophoresis of equilibrium mixtures was used to develop aptamers with predefined equilibrium dissociation constants (Kd), while nonequilibrium capillary electrophoresis of equilibrium mixtures facilitated selection of aptamers with different dissociation rate constants (k(off)). Selections were made for MutS protein, for which aptamers have never been previously developed. Both theoretical and practical aspects of smart aptamer development are presented, and the advantages of this new type of affinity probes are described.

Affinity-based ranking of ligands for DPP-4 from mixtures

Affinity-based selection strategies have recently emerged as a complement to traditional high throughput screening for the rapid discovery of lead compounds for the large number of protein targets emerging from--omics technologies. Herein, we describe a method for the ranking of mixtures of ligands by affinity selection and apply it to rank order a set of inhibitors for the enzyme dipeptidyl peptidase IV.

Simultaneous determination of p-hydroxyacetophenone, chlorogenic acid, and caffeic acid in Herba Artemisiae Scopariae by capillary electrophoresis with electrochemical detection

Capillary electrophoresis with electrochemical detection has been employed for the determination of p-hydroxyacetophenone, chlorogenic acid, and caffeic acid in Herba Artemisiae Scopariae (the dried sprout of Artemisia scoparia Waldst. et Kit.). The effects of several important factors, such as the concentration and the acidity of the running buffer, separation voltage, injection time, and detection potential, were investigated to acquire the optimum conditions. The detection electrode was a 300-microm-diameter carbon disc electrode at a working potential of +0.90 V (relative to the saturated calomel electrode). The three analytes can be well separated within 11 min in a 40-cm-long fused-silica capillary at a separation voltage of 15 kV in 50 mM borate buffer (pH 9.2). The relation between peak current and analyte concentration was linear over about 3 orders of magnitude, with detection limits (signal-to-noise ratio of 3) of 0.31, 0.39, and 0.50 microM for p-hydroxyacetophenone, chlorogenic acid, and caffeic acid, respectively. The proposed method has been successfully applied to monitor the three bioactive constituents in real plant samples and to differentiate between different herbal drugs with satisfactory assay results.

Estimation of binding constants of receptors and ligands by affinity capillary electrophoresis

An estimation method for determination of binding constants of receptors to ligands by affinity capillary electrophoresis was evaluated. On the basis of the theories of pseudostationary phase or so-called dynamic stationary phase, the retention factor (k) was used to represent the interaction between the receptor and ligand. k could be easily deduced from the migration times of the ligand and the receptor. Then, with the linear relationship of k versus the concentration of ligand in the running buffer, the binding constant K(b) was calculated from the slope and intercept. In order to test its feasibility, the calculation method was demonstrated using three model systems: the interactions between vancomycin and N-acetyl-D-Ala-D-Ala, ristocetin and N-acetyl-D-Ala-D-Ala, and carbonic anhydrase B and an arylsulfonamide. Estimated binding constants were compared with those determined by other techniques. The results showed that this estimation method was reliable. This calculation method offers a simple and easy approach to estimating binding constants of ligands to receptors.

Capillary electrophoresis-based separation techniques for the analysis of proteins

CE offers the advantages of high speed, great efficiency, as well as the requirement of minimum amounts of sample and buffer for the analysis of proteins. In this review, we summarize the CE-based techniques coupled with absorption, LIF, and MS detection systems for the analysis of proteins mostly within the past 5 years. The basic principle of each technique and its advantages and disadvantages for protein analysis are discussed in brief. Advanced CE techniques, including on-column concentration techniques and high-efficiency multidimensional separation techniques, for high-throughput protein profiling of complex biological samples and/or of single cells are emphasized. Although the developed techniques provide improved peak capacity, they have not become practical tools for proteomics, mainly because of poor reproducibility, low-sample lading capacity, and low throughput due to ineffective interfaces between two separation dimensions and that between separation and MS systems. In order to identify the complexities and dynamics of the proteomes expressed by cells, tissues, or organisms, techniques providing improved analytical sensitivity, throughput, and dynamic ranges are still demanded.

Bioanalytical interaction studies executed by preincubation affinity capillary electrophoresis

The versatility of CE is beneficial for the study of many types of molecular interactions, because different experimental designs can be made to suit the characteristics of a particular interaction. A very versatile starting point is the preequilibration type of affinity CE that has been used extensively for characterizing biomolecular interactions in the last 15 years. We review this field here and include a comprehensive overview of the existing preincubation ACE modes including their advantages and limitations as well as the methodological developments and applications within the bioanalytical field.

Recent applications of affinity interactions in capillary electrophoresis

Systems biology depends on a comprehensive assignment and characterization of the interactions of proteins and polypeptides (functional proteomics) and of other classes of biomolecules in a given organism. High‐capacity screening methods are in place for ligand capture and interaction screening, but a detailed dynamic characterization of molecular interactions under physiological conditions in efficiently separated mixtures with minimal sample consumption is presently provided only by electrophoretic interaction analysis in capillaries, affinity CE (ACE). This has been realized in different fields of biology and analytical chemistry, and the resulting advances and uses of ACE during the last 2.5 years are covered in this review. Dealing with anything from small divalent metal ions to large supramolecular assemblies, the applications of ACE span from low‐affinity binding of broad specificity being exploited in optimizing selectivity, e.g., in enantiomer analysis to miniaturized affinity technologies, e.g., for fast processing immunoassay. Also, approaches that provide detailed quantitative characterization of analyte–ligand interaction for drug, immunoassay, and aptamer development are increasingly important, but various approaches to ACE are more and more generally applied in biological research. In addition, the present overview emphasizes that distinct challenges regarding sensitivity, parallel processing, information‐rich detection, interfacing with MS, analyte recovery, and preparative capabilities remain. This will be addressed by future technological improvements that will ensure continuing new applications of ACE in the years to come.

Capillary electrophoresis of proteins 2003-2005

This review article with 304 references describes recent developments in CE of proteins, and covers the two years since the previous review (Hutterer, K., Dolník, V., Electrophoresis 2003, 24, 3998-4012) through Spring 2005. It covers topics related to CE of proteins, including modeling of the electrophoretic migration of proteins, sample pretreatment, wall coatings, improving separation, various forms of detection, special electrophoretic techniques such as affinity CE, CIEF, and applications of CE to the analysis of proteins in real-world samples including human body fluids, food and agricultural samples, protein pharmaceuticals, and recombinant protein preparations.

Interaction between Fluoroquinolones and Bovine Serum Albumin Studied by Affinity Capillary Electrophoresis

The interactions between eight fluoroquinolone antibiotics (ciprofloxacin, enoxacin, fleroxacin, levofloxacin, lomefloxacin, norfloxacin, ofloxacin, pefloxacin) and bovine serum albumin (BSA) were studied by affinity capillary electrophoresis (ACE). The binding constants were estimated by the change of migration times of the analytes through the change of concentration of BSA in the buffer solution. The yield binding constants were between 3.19 x 10(4) and 1.21 x 10(5) M(-1). These were related with the structures of fluoroquinolones, and agreed with the results obtained by other techniques. The obtained binding constants may help us in gaining some insights on possible drug/protein interactions and in early evaluation of the drugs' pharmacokinetic profiles during drug discovery.

Improving success rates for lead generation using affinity binding technologies

Affinity technologies have been applied at several stages of the drug discovery process, ranging from target identification and purification to the identification of preclinical candidates. The detection of ligand–macromolecule interactions in lead discovery is the best studied and most powerful of these techniques. Although affinity methods have been in widespread use for about a decade, only recently have many reports emerged on their utility. Primary affinity screens of large libraries of small molecules or fragments have begun to produce results for challenging targets. Furthermore, in secondary assays affinity methods are opening new avenues to tackle important medicinal chemistry tasks.