Comparison of the efficiencies of different types of adsorbents at trapping currently used pesticides in the gaseous phase using the technique of high-volume sampling

Identifying long-term health risks associated with environmental chemical incidents

In recent years, there has been a notable surge in environmental incidents, including wildfires and chemical releases. Responses to such events have primarily focused on addressing acute and immediate impacts. However, potential long-term health risks have been overlooked. Our proposed framework first advocates for the holistic identification of contaminants, prioritizing persistent organic contaminants determined through both knowledge-based and non-targeted and targeted analysis. We suggest integrating environmental monitoring and modeling approaches to assess the extent and composition of contamination caused by these chemicals. To facilitate swift assessments, we advocate the development of streamlined chemical analysis techniques and dedicated technologies for in situ monitoring of persistent organic chemicals. In addition, we provide an overview of both traditional and state-of-the-art approaches to risk assessment and introduce a three-tier risk assessment framework for evaluating the long-term health risks associated with environmental incidents. We emphasize the importance of in situ soil remediation and coordinated recovery efforts, including effective communication, evacuation, and cleaning plans for affected spaces, which are pivotal for facilitating recovery from environmental incidents. This comprehensive approach fortifies preparedness and recovery strategies, providing a robust framework for managing future environmental crises.

Development of an analytical method for the determination of more than 300 pesticides and metabolites in the particulate and gaseous phase of ambient air

Pesticides can enter the atmosphere during spraying or after application, resulting in environmental or human exposure. The study describes the optimisation and validation of analytical methods for the determination of more than 300 pesticides in the particulate and gaseous phases of the air. Pesticides were sampled with high-volume air samplers on glass-fibre filters (GFFs) and glass columns filled with polyurethane foam (PUF) and XAD-2 resin. Comparing different extraction methods, a QuEChERS extraction with acetonitrile was selected for the GFFs. For the PUF/XAD-2 columns, a cold-column extraction with dichloromethane was used. Instrumental determination was performed using liquid chromatography/electrospray ionisation-time-of-flight mass spectrometry (LC/ESI-QTOF) and gas chromatography/electron impact ionisation-tandem mass spectrometry (GC/EI-MS/MS). Recovery experiments showed recovery rates between 70 and 120% for 263 compounds on the GFFs and 75 compounds on the PUF/XAD-2 columns. Semi-quantitative determination was performed for 39 compounds on the GFFs and 110 compounds on the PUF/XAD-2 columns. Finally, 27 compounds on the GFFs and 138 compounds on the PUF/XAD-2 columns could be determined only qualitatively. For the determination of the PUF/XAD-2 samples, signal suppression (LC) or signal enhancement (GC) due to matrix effects were determined. Method quantification limits of the optimised methods ranged from 30 to 240 pg/m3 for the target compounds on the GFFs, and from 8 to 60 pg/m3 on the PUF/XAD-2 columns. The applicability of the method was demonstrated by means of environmental air samples from an agricultural area in the Netherlands.

Spatial and temporal variations of currently used pesticides (CUPs) concentrations in ambient air in Wallonia, Belgium

Pesticides are among the most widely used chemicals thus contributing to a global contamination of the environment. Studies in North America and Europe have reported ambient air concentrations of Currently Used Pesticides in rural and urban locations as well as in remote areas. Monitoring pesticides in air is required for a better understanding of human exposure through inhalation and to assess potential health effects related to this exposure pathway. In this study, 46 pesticides were analyzed in ambient air in sampling stations distributed over Wallonia during a year, from May 2015 to May 2016. Different typologies were defined for sampling sites (remote areas, urban sites, agricultural sites, livestock area, and sites with other professional uses). Ambient air was sampled for 14 days with an active air sampler at a flow rate of 4 m³/h. Quartz filters and PUF/XAD-2/PUF cartridges were used to sample both gas and particulate phase pesticides. On the 46 pesticides studied, 6 insecticides, 18 herbicides and 18 fungicides were detected. Herbicides were measured in 68.3% of samples throughout the year, whereas fungicides and insecticides were measured in 62.6% and 13.2% of the samples, respectively. The highest mean concentrations for all pesticides were measured in spring-summer, whereas few pesticides were measured at low concentrations in winter. Six pesticides were measured in the remote sampling station at lower concentrations than in all other sites highlighting volatility of these pesticides. The highest number of different pesticides and the highest concentrations were measured in agricultural stations, where uses of plant protection products are higher. Finally, less volatile pesticides were only detected near application areas and at low concentrations. Together, these results provide better insight on the spatial and temporal variations of pesticides concentrations in ambient air, which were related to pesticides uses as well to atmospheric volatility and persistence.

Airborne Pesticides-Deep Diving into Sampling and Analysis

The escalating utilization of pesticides has led to pronounced environmental contamination, posing a significant threat to agroecosystems. The extensive and persistent global application of these chemicals has been linked to a spectrum of acute and chronic human health concerns. This review paper focuses on the concentrations of airborne pesticides in both indoor and outdoor environments. The collection of diverse pesticide compounds from the atmosphere is examined, with a particular emphasis on active and passive air sampling techniques. Furthermore, a critical evaluation is conducted on the methodologies employed for the extraction and subsequent quantification of airborne pesticides. This analysis takes into consideration the complexities involved in ensuring accurate measurements, highlighting the advancements and limitations of current practices. By synthesizing these aspects, this review aims to foster a more comprehensive and informed comprehension of the intricate dynamics related to the presence and measurement of airborne pesticides. This, in turn, is poised to significantly contribute to the refinement of environmental monitoring strategies and the augmentation of precise risk assessments.

Current use pesticides in soil and air from two agricultural sites in South Africa: Implications for environmental fate and human exposure

Concerns about the possible negative impacts of current use pesticides (CUPs) for both the environment and human health have increased worldwide. However, the knowledge on the occurrence of CUPs in soil and air and the related human exposure in Africa is limited. This study investigated the presence of 30 CUPs in soil and air at two distinct agricultural sites in South Africa and estimated the human exposure and related risks to rural residents via soil ingestion and inhalation (using hazard quotients, hazard index and relative potency factors). We collected 12 soil and 14 air samples over seven days during the main pesticide application season in 2018. All samples were extracted, purified and analyzed by high-performance liquid chromatography coupled with tandem mass spectrometry. In soils, nine CUPs were found, with chlorpyrifos, carbaryl and tebuconazole having the highest concentrations (up to 63.6, 1.10 and 0.212 ng g^-1, respectively). In air, 16 CUPs were found, with carbaryl, tebuconazole and terbuthylazine having the highest levels (up to 25.0, 22.2 and 1.94 pg m^-3, respectively). Spatial differences were observed between the two sites for seven CUPs in air and two in soils. A large dominance towards the particulate phase was found for almost all CUPs, which could be related to mass transport kinetics limitations (non-equilibrium) following pesticide application. The estimated daily intake via soil ingestion and inhalation of individual pesticides ranged from 0.126 fg kg^-1 day^-1 (isoproturon) to 14.7 ng kg^-1 day^-1 (chlorpyrifos). Except for chlorpyrifos, soil ingestion generally represented a minor exposure pathway compared to inhalation (i.e. <5%). The pesticide environmental exposure largely differed between the residents of the two distinct agricultural sites in terms of levels and composition. The estimated human health risks due to soil ingestion and inhalation of pesticides were negligible although future studies should explore other relevant pathways.

Mobility and environmental monitoring of pesticides in the atmosphere - a review

Knowledge of the partition mechanisms in the agrochemical environment is fundamental for understanding their behavior within an ecosystem and mitigating possible adverse effects of these products. In this review, the objective was to present the main transport mechanisms, physical-chemical properties, and atmospheric monitoring methodologies of the most diverse types of agrochemicals used in agriculture that can reach the atmosphere and affect different compartments. It has been verified that volatilization is one of more considerable significance of the various forms of transport since a significant part of the applied pesticides can volatilize in a few days. As for monitoring these compounds in the atmosphere, both passive and active sampling have their advantages and disadvantages. Passive samplers allow sampling in large quantities and at remote locations, in addition to making continuous measurements, while active samplers have the advantage of being able to detect low concentrations and continuously. Since a significant portion of the applied pesticides is directed to the atmosphere, monitoring makes it possible to understand some properties of the pesticides present in the air. This monitoring can be done from different existing methodologies based on adopted criteria and existing technical standards. Graphical representation of mobility and environmental monitoring of atmospheric pollutants from pesticides.

Multi-year atmospheric concentrations of per- and polyfluoroalkyl substances (PFASs) at a background site in central Europe

A total of 74 high volume air samples were collected at a background site in Czech Republic from 2012 to 2014 in which the concentrations of 20 per- and polyfluoroalkyl substances (PFASs) were investigated. The total concentrations (gas + particle phase) ranged from 0.03 to 2.08 pg m^-3 (average 0.52 pg m^-3) for the sum of perfluoroalkyl carboxylic acids (∑PFCAs), from 0.02 to 0.85 pg m^-3 (average 0.28 pg m^-3) for the sum of perfluoroalkyl sulfonates (ΣPFSAs) and from below detection to 0.18 pg m^-3 (average 0.05 pg m^-3) for the sum of perfluorooctane sulfonamides and sulfonamidoethanols (ΣFOSA/Es). The gas phase concentrations of most PFASs were not controlled by temperature dependent sources but rather by long-range atmospheric transport. Air mass backward trajectory analysis showed that the highest concentrations of PFASs were mainly originating from continental areas. The average particle fractions (θ) of ΣPFCAs (θ = 0.74 ± 0.26) and ΣPFSAs (θ = 0.78 ± 0.22) were higher compared to ΣFOSA/Es (θ = 0.31 ± 0.35). However, they may be subject to sampling artefacts. This is the first study ever reporting PFASs concentrations in air samples collected over consecutive years. Significant decreases in 2012-2014 for PFOA, MeFOSE, EtFOSE and ∑PFCAs were observed with apparent half-lives of 1.01, 0.86, 0.92 and 1.94 years, respectively.

Passive air sampling for semi-volatile organic chemicals

During passive air sampling, the amount of a chemical taken up in a sorbent from the air without the help of a pump is quantified and converted into an air concentration. In an equilibrium sampler, this conversion requires a thermodynamic parameter, the equilibrium sorption coefficient between gas-phase and sorbent. In a kinetic sampler, a time-averaged air concentration is obtained using a sampling rate, which is a kinetic parameter. Design requirements for kinetic and equilibrium sampling conflict with each other. The volatility of semi-volatile organic compounds (SVOCs) varies over five orders of magnitude, which implies that passive air samplers are inevitably kinetic samplers for less volatile SVOCs and equilibrium samplers for more volatile SVOCs. Therefore, most currently used passive sampler designs for SVOCs are a compromise that requires the consideration of both a thermodynamic and a kinetic parameter. Their quantitative interpretation depends on assumptions that are rarely fulfilled, and on input parameters, that are often only known with high uncertainty. Kinetic passive air sampling for SVOCs is also challenging because their typically very low atmospheric concentrations necessitate relatively high sampling rates that can only be achieved without the use of diffusive barriers. This in turn renders sampling rates dependent on wind conditions and therefore highly variable. Despite the overall high uncertainty arising from these challenges, passive air samplers for SVOCs have valuable roles to play in recording (i) spatial concentration variability at scales ranging from a few centimeters to tens of thousands of kilometers, (ii) long-term trends, (iii) air contamination in remote and inaccessible locations and (iv) indoor inhalation exposure. Going forward, thermal desorption of sorbents may lower the detection limits for some SVOCs to an extent that the use of diffusive barriers in the kinetic sampling of SVOCs becomes feasible, which is a prerequisite to decreasing the uncertainty of sampling rates. If the thermally stable sorbent additionally has a high sorptive capacity, it may be possible to design true kinetic samplers for most SVOCs. In the meantime, the passive air sampling community would benefit from being more transparent by rigorously quantifying and explicitly reporting uncertainty.

Triple Isotopes (δ13C, δ2H, and Δ14C) Compositions and Source Apportionment of Atmospheric Naphthalene: A Key Surrogate of Intermediate-Volatility Organic Compounds (IVOCs)

Naphthalene (NAP), as a surrogate of intermediate-volatility organic compounds (IVOCs), has been proposed to be an important precursor of secondary organic aerosol (SOA). However, the relative contribution of its emission sources is still not explicit. This study firstly conducted the source apportionment of atmospheric NAP using a triple-isotope (δ¹³C, δ²H, and Δ¹⁴C) technique combined with a Bayesian model in the Beijing-Tianjin-Hebei (BTH) region of China. At the urban sites, stable carbon (-27.7 ± 0.7‰, δ¹³C) and radiocarbon (-944.0 ± 20.4‰, Δ¹⁴C) isotope compositions of NAP did not exhibit significant seasonal variation, but the deuterium system showed a relatively more ²H depleted signature in winter (-86.7 ± 8.9‰, δ²H) in comparison to that in summer (-56.4 ± 3.9‰, δ²H). Radiocarbon signatures indicated that 95.1 ± 1.8% of NAP was emitted from fossil sources in these cities. The Bayesian model results indicated that the emission source compositions in the BTH urban sites had a similar pattern. The contribution of liquid fossil combustion was highest (46.7 ± 2.6%), followed by coal high-temperature combustion (26.8 ± 7.1%), coal low-temperature combustion (18.9 ± 6.4%), and biomass burning (7.6 ± 3.1%). At the suburban site, the contribution of coal low-temperature combustion could reach 70.1 ± 6.4%. The triple-isotope based approach provides a top-down constraint on the sources of atmospheric NAP and could be further applied to other IVOCs in the ambient atmosphere.

Legacy and current-use pesticides (CUPs) in the atmosphere of a rural area in central Chile, using passive air samplers

Polyurethane foam (PUF) disks in passive air samplers (PAS) and passive dry deposition (Pas-DD) collectors were used to assess the presence of persistent organic pollutants (POPs) and current-use pesticides (CUPs) in a rural area of central Chile (Peumo, VI Region). The samplers were exposed from September 2015 (spring) to March 2016 (summer), with the PUFs collected at intervals of 30, 60, and 90 days. Both samplers (PUF-PAS and Pas-DD) captured more than one pesticide per sampling period. Chlorpyrifos-ethyl and pyrimethanil presented the highest air concentration with PUF-PAS (3470.2 ng m^-3 for chlorpyrifos-ethyl and 52.8 ng m^-3 for pyrimethanil). The deposited amount of chlorpyrifos-ethyl, pyrimethanil, penconazole, diazinon and malathion in some Pas-DD, was superior to amount of pesticides captured by PUF-PAS. Differences between the amount deposited and captured by each sampler should be studied in greater detail, because wind speed, atmospheric particulate matter size and sampler design are some fundamental variables in this process. These results provide preliminary information on the presence of current-use pesticides in the atmosphere of Peumo, VI Region, serving as a foundation for future environmental monitoring programs.

Patterns of Personal Exposure to Urban Pollutants Using Personal Passive Samplers and GC × GC/ToF-MS

The performance of silicon wristband passive samplers (WB), combined with comprehensive two-dimensional gas-chromatography/time-of-flight mass-spectrometry (GC × GC/ToF-MS), for the analysis of urban derived pollutants in the personal environment was evaluated. Cumulative 5-day exposure samples from 27 individuals in areas with different geographical/socioeconomic characteristics within the Santiago Metropolitan Region (Chile) were collected during winter and summer (2016-2017). Samples were extracted without cleanup/fractionation and analyzed using targeted and nontargeted methods. The quantified semivolatile organic compounds (SVOCs, n = 33) (targeted analysis), and tentatively identified features ( n = 595-1011) (nontargeted analysis) were classified according to their use/source. Seasonal differences were observed in the targeted analysis, while seasonal and spatial differences were observed in the nontargeted analysis. Higher concentrations of combustion products were observed in winter, while higher concentrations of consumer products were found in summer. Spatial differences were observed in hierarchical clustering analysis of the nontargeted data, with distinct clusters corresponding to specific subregions of the urban area. Results from this study provide spatial and seasonal distributions of urban pollutants within an urban area and establish the utility of linking WB with nontargeted analysis as a tool to identify and prioritize new exposures to urban contaminants at the local/community level.

Comparison of atmospheric concentrations of currently used pesticides between urban and rural areas during intensive application period in Alsace (France) by using XAD-2® based passive samplers

XAD-2® passive samplers (PAS) have been exposed simultaneously for 14 days on two sites, one rural and one urban, situated in Alsace (East of France) during intensive pesticides application in agriculture (between March and September). PAS have been extracted and analyzed for current-used pesticides and lindane with an analytical method coupling accelerated solvent extraction (ASE), solid-phase microextraction (SPME) and GC/MS/MS. Results show the detection of pesticides is linked to the period of application and spatial and temporal variabilities can be observed with these PAS during the selected sampling period. The spatial and temporal variability is comparable to the one previously observed by comparing data obtained with PAS with data from Hi.-Vol. samplers in an urban area. Sampling rates were calculated for some pesticides and values are comparable to the data already available in the literature. From these sampling rates, concentrations in ng m^-3 of pesticides in PAS have been calculated and are in the same order of magnitude as those obtained with Hi.Vol. sampling during the same period of time.

Using a passive air sampler to monitor air-soil exchange of organochlorine pesticides in the pasture of the central Tibetan Plateau

Air-soil exchange is a key process controlling the fate of persistent organic pollutants (POPs). However, the "sink effect" of soil for POPs in Tibetan pasture has not been clear. In NamCo, in the central Tibetan Plateau (TP) where the land is covered by grass, a modified passive air sampler (PAS) (thickness: 2cm) was tested. Using the PAS, the atmospheric gaseous phase organochlorine pesticides (OCPs) at 11 heights from close-to-surface (2cm) to 200cm above ground, in summer and in winter, were measured. Concentrations of OCPs in summer were higher than those in winter. Both in summer and winter, atmospheric concentrations of OCPs decreased with decreasing height from 200 to 2cm, indicating that OCPs were being deposited from air to soil. Air deposition of OCPs was possibly driven by wind speed. Furthermore, based on air OCPs at 0-3cm near the surface, the interface exchange of OCPs between air and soil was studied by the fugacity method. The results showed that pastural soil in the TP was a "sink" of OCPs even in summer. The mean deposition fluxes of α-HCH, γ-HCH and o,p'-DDT were 0.72, 0.24 and 0.54pg/h/m², respectively, and it was estimated that the level of these pollutants in the soil will double every 24, 66 and 206years, respectively. This study will contribute to the further understanding of global cycling of POPs in different land covers.

Application of XAD-2 resin-based passive samplers and SPME-GC-MS/MS analysis for the monitoring of spatial and temporal variations of atmospheric pesticides in Luxembourg

Passive air sampling has been shown to be a very interesting alternative to high-volume sampling by overcoming its disadvantages (size, weight, expensiveness). However, to date, only limited data is available about passive air sampling of current-use pesticides. In order to test if passive samplers allow monitoring of spatial and temporal variations of atmospheric pesticide concentrations, five XAD-2-resin based passive air samplers were deployed at five locations in Luxembourg. Samplers were analyzed using accelerated solvent extraction coupled to solid-phase microextraction and gas chromatography with tandem mass spectrometry. Collected data was used to study the spatial and temporal variations of the concentrations of the compounds. Twenty two pesticides were detected between March and October, while no pesticides were detected from November to February. Highest concentrations were measured on the rural sites, suggesting that the used XAD-2 resin-based passive samplers allow the simultaneous monitoring of multiple current-use pesticides and identifying spatial and temporal variations.

Field evaluation of a flow-through sampler for measuring pesticides and brominated flame retardants in the arctic atmosphere

A flow-through sampler (FTS) was codeployed with a super high volume active sampler (SHV) between October 2007 and November 2008 to evaluate its ability to determine the ambient concentrations of pesticides and brominated flame retardants in the Canadian High Arctic atmosphere. Nine pesticides and eight flame retardants, including three polybrominated diphenyl ether (PBDE) replacement chemicals, were frequently detected. Atmospheric concentrations determined by the two systems showed good agreement when compared on monthly and annually integrated time scales. Pesticide concentrations were normally within a factor of 3 of each other. The FTS tended to generate higher PBDE concentrations than the SHV presumably because of the entrainment of blowing snow/ice crystals or large particles. Taking into account uncertainties in analytical bias, sample volume, and breakthrough estimations, the FTS is shown to be a reliable and cost-effective method, which derives seasonally variable concentrations of semivolatile organic trace compounds at extremely remote locations that are comparable to those obtained by conventional high volume air sampling. Moreover, the large sampling volumes captured by the FTS make it suitable for the screening of new and emerging chemicals in the remote atmosphere where concentrations are usually low.

Comparison of four active and passive sampling techniques for pesticides in air

Four sampling systems were evaluated for their ability to determine the concentrations of pesticides in the atmosphere of rural southern Ontario. Two active air samplers (AAS, high-volume and low-volume pumps) and two passive air samplers (PAS, polyurethane foam disks and XAD-resin) were deployed between March 2006 and September 2007 using different sampling frequencies (biweekly to annually) and durations (24 h to 1 yr). Concentrations of nine pesticides in air determined by the different systems were compared at time scales of two weeks, two months, and one year. Agreement in the average concentrations obtained by different techniques improved with increasing length of the comparison period, especially for pesticides with high short-term temporal concentration variability. Such variability was high for the most volatile and reactive pesticides (trifluralin and pendimethalin). Except for these two pesticides, the annually averaged air concentrations determined by the different systems are within a factor of 2.5 for all pesticides and are not statistically different. Even though the PUF-PAS may have approached equilibrium with the atmosphere during deployment, the air concentrations are not statistically significantly different from those determined by AAS when averaged over longer time scales. Two month XAD-PAS deployments during the second summer resulted in sufficient sampling volumes to reliably establish air concentrations. If the sole purpose of collecting air samples is the assessment of long-term air concentration trends, this can be achieved most cost-effectively, i.e., with the least number of samples with year-long XAD-PAS.

Temporal variations of concentrations of currently used pesticides in the atmosphere of Strasbourg, France

Atmospheric samples have been collected in Strasbourg between April 18 and May 29, 2007 and were analyzed for 71 current-use pesticides, of which 38 were detected. Average concentrations ranged from 0.09 ng m(-3) for Fenarimol to 110.42 ng m(-3) for Dimethachlor, which was slightly higher than the concentrations reported from other, comparable agricultural regions. Significant temporal variations were observed for 30 pesticides, and for most of them it could be shown that these were linked to time, temperature or atmospheric pressure. In several cases this helped to identify pesticide application just before or at the beginning of the sampling period, or ongoing treatment. Humidity, in contrast to previous reports, could not be linked to these variations. For the other 8 pesticides, only very little temporal variations were observed. Generally, these concentrations were low (less than 1 ng m(-3)), and it was assumed that they are not in use in Alsace at present.

Simultaneous determination of chlorothalonil and its metabolite 4-hydroxychlorothalonil in greenhouse air: dissipation process of chlorothalonil

An analytical method was developed and tested for the simultaneous determination of chlorothalonil and its main metabolite 4-hydroxychlorothalonil, in airborne samples. High performance liquid chromatography equipped with Ultra-violet detector was used to separate and quantify the analytes. Glass microfibre filters for the collection of the analytes' particles were tested. Solid sorbents, such as Tenax, Florisil, XAD-2 and silica gel, were studied to find out the most suitable material for the collection of the analytes in the gas phase. The results have shown that only chlorothalonil was trapped in the vapor phase with highest results obtained when silica gel was the sorbent of choice. Linearity was demonstrated in a wide concentration range 0.01-10.00 mg L(-1). Recoveries from spiked glass microfibre filters and silica gel cartridges for chlorothalonil and 4-hydroxychlorothalonil were almost quantitative. The quantification limits were calculated to be 8.4 and 19.6 ng m(-3) in air for chlorothalonil and 4-hydroxychlorothalonil, respectively. The two analytes spiked on the GF/A filters and silica gel cartridges were proven to be stable for more than 15 days, at 4degrees C and ambient temperature. The applicability of the present method was demonstrated by the analysis of the chlorothalonil and its metabolite in greenhouse air.