Ferrocene-based derivatization in analytical chemistry

Cu-mediated enantioselective C-H alkynylation of ferrocenes with chiral BINOL ligands

A wide range of Cu(II)-catalyzed C-H activation reactions have been realized since 2006, however, whether a C-H metalation mechanism similar to Pd(II)-catalyzed C-H activation reaction is operating remains an open question. To address this question and ultimately develop ligand accelerated Cu(II)-catalyzed C-H activation reactions, realizing the enantioselective version and investigating the mechanism is critically important. With a modified chiral BINOL ligand, we report the first example of Cu-mediated enantioselective C-H activation reaction for the construction of planar chiral ferrocenes with high yields and stereoinduction. The key to the success of this reaction is the discovery of a ligand acceleration effect with the BINOL-based diol ligand in the directed Cu-catalyzed C-H alkynylation of ferrocene derivatives bearing an oxazoline-aniline directing group. This transformation is compatible with terminal aryl and alkyl alkynes, which are incompatible with Pd-catalyzed C-H activation reactions. This finding provides an invaluable mechanistic information in determining whether Cu(II) cleaves C-H bonds via CMD pathway in analogous manner to Pd(II) catalysts.

Ferrocene/ β-cyclodextrin based supramolecular nanogels as theranostic systems

A supramolecular redox responsive nanogel (NG) with the ability to sense cancer cells and loaded with a releasing therapeutic agent was synthesized using hostguest interactions between polyethylene glycol-grafted-β-cyclodextrin and ferrocene boronic acid. Cyclic voltammetry matched with other spectroscopy and microscopy methods provided strong indications regarding host-guest interactions and formation of the NG. Moreover, the biological properties of the NG were evaluated using fluorescence silencing, confocal laser scanning microscopy, and cell toxicity assays. Nanogel with spherical core-shell architecture and 100-200 nm sized nanoparticles showed high encapsulation efficiency for doxorubicin (DOX) and luminol (LU) as therapeutic and sensing agents. High therapeutic and sensing efficiencies were manifested by complete release of DOX and dramatic quenching of LU fluorescence triggered by 0.05 mM H2O2 (as an ROS component). The NGs showed high ROS sensitivity. Taking advantage of a high loading capacity, redox sensitivity, and biocompatibility, the NGs can be used as strong theranostic systems in inflammation-associated diseases.

Insight into continuous glucose monitoring: from medical basics to commercialized devices

According to the latest statistics, more than 537 million people around the world struggle with diabetes and its adverse consequences. As well as acute risks of hypo- or hyper- glycemia, long-term vascular complications may occur, including coronary heart disease or stroke, as well as diabetic nephropathy leading to end-stage disease, neuropathy or retinopathy. Therefore, there is an urgent need to improve diabetes management to reduce the risk of complications but also to improve patient's quality life. The impact of continuous glucose monitoring (CGM) is well recognized, in this regard. The current review aims at introducing the basic principles of glucose sensing, including electrochemical and optical detection, summarizing CGM technology, its requirements, advantages, and disadvantages. The role of CGM systems in the clinical diagnostics/personal testing, difficulties in their utilization, and recommendations are also discussed. In the end, challenges and prospects in future CGM systems are discussed and non-invasive, wearable glucose biosensors are introduced. Though the scope of this review is CGMs and provides information about medical issues and analytical principles, consideration of broader use will be critical in future if the right systems are to be selected for effective diabetes management.

Simultaneous Electrochemical Detection of LDL and MDA-LDL Using Antibody-Ferrocene or Anthraquinone Conjugates Coated Magnetic Beads

The simultaneous detection of atherosclerotic cardiovascular disease (ACSVD) biomarkers was recently of great scientific interest. In this work, magnetic beads-based immunosensors for the simultaneous detection of low density lipoprotein (LDL) and malondialdehyde-modified low density lipoprotein (MDA-LDL) were presented. The approach proposed was based on the formation of two types of specific immunoconjugates consisting of monoclonal antibodies: anti-LDL or anti-MDA-LDL, together with redox active molecules: ferrocene and anthraquinone, respectively, coated on magnetic beads (MBs). The decrease in redox agent current in the concentration range: 0.001-1.0 ng/mL for LDL and 0.01-10.0 ng/mL for MDA-LDL, registered by square wave voltammetry (SWV), was observed upon the creation of complex between LDL or MDA-LDL and appropriate immunoconjugates. The detection limits of 0.2 ng/mL for LDL and 0.1 ng/mL for MDA-LDL were estimated. Moreover, the results of selectivity against the possible interferents were good, as human serum albumin (HSA) and high density lipoprotein (HDL), stability and recovery studies demonstrated the potential of platform proposed for early prognosis and diagnosis of ASCVD.

Dicarboxylate-containing and fully substituted ferrocene with rapid dissolvability, high solubility, good stability, and moderate formal potential for mediated electrochemical detection

An electron mediator with rapid dissolvability and high solubility in aqueous electrolyte solutions is essential for point-of-care testing based on mediated electrochemical detection. However, most ferrocenyl (Fc) compounds have slow dissolvability and poor solubility owing to high hydrophobicity of the Fc backbone. Moreover, many Fc compounds have poor stability and nonoptimal formal potential (). Herein, we present an Fc compound, Fc8m2c, which exhibits rapid dissolvability, high solubility, good stability, and moderate along with its high electron-mediation rate. The of Fc8m2c (0.17 V vs. Ag/AgCl) is tuned by two electron-withdrawing acyl substituents and eight electron-donating methyl substituents. Two pendant carboxylate groups of Fc8m2c allow for rapid dissolvability and high solubility (0.63 M in water), whereas full substitution in its two cyclopentadienyl ligands facilitates good chemical stability against decomposition in the presence of dissolved O₂ and ambient light. A moderate enables the application of a potential of 0.07 V at which electrochemical background currents are low and also contributes toward resisting the decomposition of both Fc8m2c and Fc8m2c+. Fc8m2c provides a high electron-mediation rate constant (2.4 × 10⁶ M^-1 s^-1) in glucose detection using glucose dehydrogenase. When Fc8m2c is applied to a glucose sensor, the calculated detection limit is ∼0.1 mM with a measurement period of 5 s. Considering that the normal concentration of glucose in serum is between 3.9 and 6.6 mM, the detection limit is sufficiently low. These results show that Fc8m2c is an excellent electron-mediator candidate for sensitive and rapid glucose detection.

Dominant changes in centre Fe atom of decamethyl-ferrocene from ferrocene in methylation

Staggered decamethyl-ferrocene (*Fc) becomes the lower energy conformer at low temperature, whereas the eclipsed conformer of ferrocene (Fc) is more stable. The powerful infrared (IR) spectroscopy which has remarkably provided signatures of ferrocene (Fc) in eclipsed and staggered conformers recently is employed to investigate methylation of Fc. The most significant consequences of the full methylation of Fc in the IR spectra are the blue shift of the band at ~ 800 cm−1 in Fc to ~ 1500 cm−1 in *Fc, and the enhancement of the C–H stretch band at ~ 3200 cm−1 region in *Fc. Further analysis reveals large impact of Fc methylation on core electron energies of the centre Fe atom (1s22s22p63s23p6). The Fe core electron energy changes can be as large as ~ 10 kcal mol−1 and are directional—the Fe 2pz and 3pz orbitals along the *Cp–Fe–*Cp axis (Cp centroids, vertical) change more strongly than other Fe core electrons in px and py orbitals. The directional inner shell energy changes are evidenced by larger inner shell reorganization energy. Energy decomposition analysis (EDA) indicates that methyl groups in *Fc apparently change the physical energy components with respect to Fc. The large steric energy of *Fc evidences that the closest hydrogens on adjacent methyl groups of the same *Cp ring in crystal structure are 0.2–0.4 Å closer than the hydrogens on nearest-neighbour methyl groups on opposing rings in *Fc. A significant increase in Pauli repulsive energy contributes to the large repulsive steric energy in *Fc.

Antibody–Ferrocene Conjugates as a Platform for Electro-Chemical Detection of Low-Density Lipoprotein

Low-density lipoprotein (LDL) is a cardiac biomarker identified in the pathology of cardiovascular disease (CVD). Typically, the level of LDL is calculated using the Friedewald relationship based on measured values of total cholesterol, high-density lipoproteins (HDL), and triglycerides. Unfortunately, this approach leads to some errors in calculation. Therefore, direct methods that can be used for fast and accurate detection of LDL are needed. The purpose of this study was to develop an electrochemical platform for the detection of LDL based on an antibody–ferrocene conjugate. An anti-apolipoprotein B-100 antibody labeled with ferrocene was covalently immobilized on the layer of 4-aminothiophenol (4-ATP) on the surface of gold electrodes. Upon interaction between LDL and the antibody–ferrocene conjugate, a decrease in the ferrocene redox signal registered by square wave voltammetry was observed, which depends linearly on the concentration from 0.01 ng/mL to 1.0 ng/mL. The obtained limit of detection was equal to 0.53 ng/mL. Moreover, the satisfied selectivity toward human serum albumin (HSA), HDL, and malondialdehyde-modified low-density lipoprotein (MDA-LDL) was observed. In addition, the acceptable recovery rates of LDL in human serum samples indicate the possible application of immunosensors presented in clinical diagnostics.

Helium-Plasma-Ionization Mass Spectrometry of Metallocenes and Their Derivatives

Ferrocene and its derivatives and nickelocene undergo facile ionization when exposed directly to the ionizing plasma of a helium-plasma ionization (HePI) source. Mass spectra recorded from such samples under ambient positive-ion-generating conditions show intense peaks for the respective molecular ions [M^+•] and protonated species [(M + H)⁺]. The protonation process occurs most efficiently when traces of water are present in the heated nitrogen used as the "heating gas." In fact, the relative population of the two categories of ions generated in this way can be manipulated by regulating the heating-gas flow. Moreover, rapid and highly efficient gas-phase hydrogen-deuterium exchange (HDX) reactions can be performed in the ion source by passing the heating gas through a vial with D₂O before it reaches the HePI source. Moreover, the ionized species generated in this way can be subjected to in-source CID fragmentation in the QDa-HePI source very efficiently by varying the sampling-cone voltage. By this procedure, ions generated from ferrocene and nickelocene could be stripped so far as to ultimately generate the bare-metal cation. Other typical fragment-ions produced from protonated metallocenes included the M(cp)₁⁺ ions (M = Fe or Ni), by elimination of a cyclopentadiene molecule, or the molecular cation, by loss of a H^• radical. Moreover, H/D exchanges and subsequent tandem mass spectrometric analysis indicated that the central metal core participates in the initial protonation process of ferrocene under HePI conditions. However, in compounds such as ferrocene carboxaldehyde and ferrocene boronic acid, the protonation takes place at the peripheral functional group.

Antibody-Electroactive Probe Conjugates Based Electrochemical Immunosensors

Suitable immobilization of a biorecognition element, such as an antigen or antibody, on a transducer surface is essential for development of sensitive and analytically reliable immunosensors. In this review, we report on (1) methods of antibody prefunctionalization using electroactive probes, (2) methods for immobilization of such conjugates on the surfaces of electrodes in electrochemical immunosensor construction and (3) the use of antibody-electroactive probe conjugates as bioreceptors and sensor signal generators. We focus on different strategies of antibody functionalization using the redox active probes ferrocene (Fc), anthraquinone (AQ), thionine (Thi), cobalt(III) bipyridine (Co(bpy)33+), Ru(bpy)32+ and horseradish peroxidase (HRP). In addition, new possibilities for antibody functionalization based on bioconjugation techniques are presented. We discuss strategies of specific, quantitative antigen detection based on (i) a sandwich format and (ii) a direct signal generation scheme. Further, the integration of different nanomaterials in the construction of these immunosensors is presented. Lastly, we report the use of a redox probe strategy in multiplexed analyte detection.

Molecular architecture for DNA wiring

Detection of the hybridisation events is of great importance in many different biotechnology applications such as diagnosis, computing, molecular bioelectronics, and among others. However, one important drawback is the low current of some redox reporters that limits their application. This paper demonstrates the powerful features of molecular wires, in particular the case of S-[4-[2-[4-(2-Phenylethynyl)phenyl]ethynyl]phenyl] thiol molecule and the key role that play the nanometric design of the capture probe linkers to achieve an efficient couple of the DNA complementary ferrocene label with the molecular wire for an effective electron transfer in co-immobilised self-assembled monolayers (SAMs) for DNA hybridisation detection. In this article, the length of the linker capture probe was studied for electron transfer enhancement from the ferrocene-motifs of immobilised molecules towards the electrode surface to obtain higher kinetics in the presence of thiolated molecular wires. The use of the right couple of capture probe linker and molecular wire has found to be beneficial as it helps to amplify eightfold the signal obtained.

Gold nanoparticles-based multifunctional nanoconjugates for highly sensitive and enzyme-free detection of E.coli K12

Immobilization of proteins on a biocompatible conductive interface is highly desirable for the fabrication of biosensors. In this study, a nanocomposite has been prepared by assembling well-distributed gold nanoparticles (AuNPs) on the surface of a polypyrrole-reduced graphene oxide (PPy-rGO) composite through electrostatic adsorption. This serves as a platform for immobilization of a capture antibody, which was conjugated onto the ferrocene doped polypyrrole-gold nanoparticles (PPy@Fc/AuNPs) composite. The design and performance of the biosensor was tested against detection of a whole-cell bacteria E. coli K12. This nanocomposite has a high surface area, good conductivity and biocompatibility, which is shown to be very suitable for enzyme-free detection of this bacteria. Results show excellent analytical performance with a linear range from 1.0 × 10¹ to 1.0 × 10⁷ CFU mL^-1 and a low detection limit of 10 CFU mL^-1. The sensor has high selectivity, excellent reproducibility, and good stability.

Electrochemical immunosensors and their recent nanomaterial-based signal amplification strategies: a review

In recent years, tremendous advances have been made in biosensors based on nanoscale electrochemical immunosensors for use in the fields of agriculture, food safety, biomedicine, quality control, and environmental and industrial monitoring.

In-Depth Electrochemical Investigation of Surface Attachment Chemistry via Carbodiimide Coupling

Aminoferrocene is used as an electroactive indicator to investigate carbodiimide coupling reactions on a carboxylic acid-functionalized self-assembled monolayer. The commonly used attachment chemistry with 1-ethyl-3-(3-(dimethylamino)propyl)carbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS) is used for surface activation. A number of conditions are investigated, including EDC and NHS concentration, buffer solutions, incubation timing, and aminoferrocene concentration. Ferrocene is a well-documented electroactive species, and the number of surface-bound ferrocene species can be calculated using electrochemical methods. This capability allows determination of optimal conditions, as well as providing a method for comparing and investigating novel carboxylated surfaces. An EDC-mediated procedure with ∼5 mM EDC and NHS (1:1) made in water, with a full acid monolayer, with 250 μM aminoferrocene for 40 min was found to give the highest ferrocene attachment. An application of this is demonstrated for preparing a probe-DNA-coated surface for DNA sensing. By backfilling with aminoferrocene, a differential quantification of the amount of probe DNA available for sensing can be obtained. This provides an elegant method to monitor an important aspect, namely, probe surface characterization, which will be highly useful for biosensing purposes.

Mass spectrometric methods for monitoring redox processes in electrochemical cells

Electrochemistry (EC) is a mature scientific discipline aimed to study the movement of electrons in an oxidation-reduction reaction. EC covers techniques that use a measurement of potential, charge, or current to determine the concentration or the chemical reactivity of analytes. The electrical signal is directly converted into chemical information. For in-depth characterization of complex electrochemical reactions involving the formation of diverse intermediates, products and byproducts, EC is usually combined with other analytical techniques, and particularly the hyphenation of EC with mass spectrometry (MS) has found broad applicability. The analysis of gases and volatile intermediates and products formed at electrode surfaces is enabled by differential electrochemical mass spectrometry (DEMS). In DEMS an electrochemical cell is sampled with a membrane interface for electron ionization (EI)-MS. The chemical space amenable to EC/MS (i.e., bioorganic molecules including proteins, peptides, nucleic acids, and drugs) was significantly increased by employing electrospray ionization (ESI)-MS. In the simplest setup, the EC of the ESI process is used to analytical advantage. A limitation of this approach is, however, its inability to precisely control the electrochemical potential at the emitter electrode. Thus, particularly for studying mechanistic aspects of electrochemical processes, the hyphenation of discrete electrochemical cells with ESI-MS was found to be more appropriate. The analytical power of EC/ESI-MS can further be increased by integrating liquid chromatography (LC) as an additional dimension of separation. Chromatographic separation was found to be particularly useful to reduce the complexity of the sample submitted either to the EC cell or to ESI-MS. Thus, both EC/LC/ESI-MS and LC/EC/ESI-MS are common.

Detection of proteins by hyphenated techniques with endogenous metal tags and metal chemical labelling

The absolute and relative quantitation of proteins plays a fundamental role in modern proteomics, as it is the key to understand still unresolved biological questions in medical and pharmaceutical applications.

Redox-based control of the transformation and activation of siRNA complexes in extracellular environments using ferrocenyl lipids

We report physical characterization and biological evaluation of complexes of small interfering RNA (siRNA) formed using a cationic lipid [bis(11-ferrocenylundecyl)dimethylammonium bromide (BFDMA)] containing redox-active ferrocenyl groups at the end of each hydrophobic tail. We demonstrate that control over the redox state of BFDMA can be used to influence key physical properties and control the activities of lipoplexes formed using siRNA-based constructs. Specifically, lipoplexes of siRNA and reduced BFDMA lead to high levels of sequence-specific gene silencing in cells, but lipoplexes formed using oxidized BFDMA do not. Lipoplexes of oxidized BFDMA can be activated in situ to induce high levels of silencing by addition of a chemical reducing agent, demonstrating a basis for external control over the activation/delivery of siRNA in cellular environments. Differences in activity arise from the inability of oxidized BFDMA to promote efficient internalization of siRNA; these differences also correlated to significant differences in the nanostructures of these lipoplexes (determined by cryo-TEM) and their ζ potentials as a function of oxidation state. These results are considered in view of recent studies characterizing the nanostructures, properties, and behaviors of lipoplexes formed using BFDMA and macromolecular plasmid DNA. We find that several key structural features and aspects of redox control observed for lipoplexes of plasmid DNA are maintained in complexes formed using smaller and more rigid siRNA. The ability to transform BFDMA in complex media presents opportunities to exert control over the nanostructures and behaviors of siRNA lipoplexes in ways not possible using conventional lipids. The approaches reported here could thus prove useful in both fundamental and applied contexts.

Single electron redox via an ion-neutral complex in the fragmentation of protonated benzoylferrocenes

RATIONALE

Ferrocene derivatives have become very popular molecules for biological applications. Although considerable experimental and theoretical calculation studies have demonstrated that ferrocene derivatives are easily oxidized during electrospray ionization (ESI), the details of the single electron redox reaction for protonated benzoylferrocenes in collision-induced dissociation (CID) mass spectrometry (MS) has not been obtained. Characterizing this mechanism is useful for further understanding the properties of ferrocene-containing biomaterials.

METHODS

All CID MS experiments were carried out using ESI ion trap mass spectrometry in positive ion mode. In addition, the accurate mass of fragments was measured on a ESI quadrupole time-of-flight (QTOF) mass spectrometer in positive ion mode. Theoretical calculations were carried out by the density functional theory (DFT) method with a hybrid basis set consisting of 6-31G (d) and ECP LanL2DZ in the Gaussian 03 program.

RESULTS

In the fragmentation of protonated benzoylferrocenes, the characterized ferrocinium cation was observed, which was proposed from the cleavage of the bond between the ipso-carbon atom and the carbonyl carbon followed by a single electron redox in [substituted benzoyl/ferrocene] complexes. Moreover, when the complex contained an oxidant (substituted benzoyl cation) with higher electron affinity, the single electron redox reaction was more efficient. A correlation was established between the intensities of the two competitive product ions and the electron affinities of substituted benzoyl cations.

CONCLUSIONS

The single electron redox reaction by the [substituted benzoyl/ferrocene] complexes was proposed by CID MS and theoretical calculations, which provided potential evidence to further understand the reversible reduction characteristics of ferrocene-containing biomaterials.

Electrochemical methods in conjunction with capillary and microchip electrophoresis

Electromigrative techniques such as capillary and microchip electrophoresis (CE and MCE) are inherently associated with various electrochemical phenomena. The electrolytic processes occurring in the buffer reservoirs have to be considered for a proper design of miniaturized electrophoretic systems and a suitable selection of buffer composition. In addition, the control of the electroosmotic flow plays a crucial role for the optimization of CE/MCE separations. Electroanalytical methods have significant importance in the field of detection in conjunction with CE/MCE. At present, amperometric detection and contactless conductivity detection are the predominating electrochemical detection methods for CE/MCE. This paper reviews the most recent trends in the field of electrochemical detection coupled to CE/MCE. The emphasis is on methodical developments and new applications that have been published over the past five years. A rather new way for the implementation of electrochemical methods into CE systems is the concept of electrochemically assisted injection which involves the electrochemical conversions of analytes during the injection step. This approach is particularly attractive in hyphenation to mass spectrometry (MS) as it widens the range of CE-MS applications. An overview of recent developments of electrochemically assisted injection coupled to CE is presented.

Structural analysis of organometallic compounds with soft ionization mass spectrometry

The analysis of organometallic compounds with mass spectrometry has some special features in comparison with organic and bioorganic compounds. The first step is the choice of a suitable ionization technique, where the electrospray ionization is certainly the best possibility for most classes of organometallic compounds and metal complexes. Some ionization mechanisms of organometallic compounds are comparable to organic molecules, such as protonation/deprotonation, and adduct formation with sodium or potassium ions; however, in many cases, different mechanisms and their combinations complicate the spectra interpretation. Organometallics frequently undergo various types of adduct and polymerization reactions that result in significantly higher masses observed in the spectra in comparison to molecular weights of studied compounds. Metal elements typically have more natural isotopes than common organic elements, which cause characteristic wide distributions of isotopic peaks; for example, tin has ten natural isotopes. The isotopic pattern can be used for the identification of the type and number of metal elements in particular ions. The ionization and fragmentation behavior also depend on the type of metal atom; therefore, our discussion of mass spectra interpretation is divided according to the different type of organometallic compounds. Among various types of mass spectrometers available on the market, trap-based analyzers (linear or spherical ion-traps, Orbitrap) are suitable to study complex fragmentation pathways of organometallic ions and their adducts, whereas high-resolution and high-mass accuracy analyzers (time-of-flight-based analyzers, or Fourier transform-based analyzers-Orbitrap or ion cyclotron resonance mass spectrometers) provide accurate masses applicable for the determination of the elemental composition of individual ions.

Application of on-line electrochemistry/electrospray/tandem mass spectrometry to a quantification method for the antipsychotic drug zotepine in human serum

A simple, rapid, and sensitive on-line liquid chromatographic electrochemistry/electrospray/tandem mass spectrometry (LC-EC/ESI-MS/MS) method for the determination of zotepine in human serum was developed using a new generated-electrochemically fragment ion, and was validated. A recent novel technique of LC-EC/ESI-MS/MS that combines LC-MS/MS and the on-line EC reaction is potentially applicable to developing a quantification method for drugs in biological samples. Newly formed products generated by the on-line EC cell are expected to provide appropriate precursor and product ions for the MS/MS determination method. This technique was successfully applied to a drug assay in a biological matrix. After adding imipramine (IS) to a 30-microL aliquot of human serum, the resulting sample was simply deproteinated with acetonitrile for a measurement. The analytical run time was 5 min. The calibration curve was linear in the concentration range of 10-2000 ng/mL. The intra-assay precision and accuracy were in the range of 1.8-8.9 and 98.4-113%, respectively.