Multiresidue screening of endocrine-disrupting chemicals and pharmaceuticals in aqueous samples by multi-stir bar sorptive extraction-single desorption-capillary gas chromatography/mass spectrometry

Contribution to the determination of tributyltin in water by stir bar sorptive extraction‒thermal desorption‒gas chromatography‒tandem mass spectrometry

An environmentally friendly method was developed to determine tributyltin (TBT) in water at the levels required by the European Union Water Framework Directive (EU WFD) using stir bar sorptive extraction (SBSE) in combination with thermal desorption‒gas chromatography‒triple quadrupole tandem mass spectrometry. The main focus of the method development was on addressing some aspects of reducing blank values (minimizing the use of chemicals, glassware cleaning, pretreatment of sorptive stir bars) and optimizing the SBSE procedure variables (sample volume, polarity of sample solution, extraction time). The performance of the method was studied in terms of linearity, matrix effect, method limits and accuracy (precision and trueness) using MilliQ, tap and surface water. TBT quantification limit for the studied matrices ranged from 0.049 to 0.055 ng L^‒1 and repeatability (RSD%, n = 10) and recovery at the environmental quality standard (EQS) concentration of 0.2 ng L^‒1 were in the range of 6‒18% and 88‒107%, respectively, indicating good performance of the method. The matrix effect of river water (‒78%) and artificial seawater (‒83%) compared to MilliQ water showed the necessity to use a matrix-matched calibration when analysing TBT in surface water samples. The developed sample preparation was further evaluated for greenness using the recently introduced AGREEprep assessment, which revealed a much greener performance of the proposed method over the compared CEN/TS 16692 method. The method meets the requirements of the EU WFD and is suitable for monitoring, evaluation and classification of the chemical status of surface waters.

Analytical derivatizations in environmental analysis

Analytical derivatization is a technique that alters the structure of an analyte and produces a product more suitable for analysis. While this process can be time-consuming and add reagents to the procedure, it can also facilitate the isolation of the analyte(s), enhance analytes' stability, improve separation and sensitivity, and reduce matrix interferences. Since derivatization is a functional group analysis, it improves selectivity by separating reactive from neutral compounds during sample preparation. This technique introduces detector-orientated tags into analytes that lack suitable physicochemical properties for detection at low concentrations. Notably, many regulatory bodies, especially those in the environmental field, require these characteristics in analytical methods. This review focuses on note-worthy analytical derivatization methods employed in environmental analyses with functional groups, phenol, carboxylic acid, aldehyde, ketone, and thiol in aqueous, soil, and atmospheric sample matrices. Both advantages and disadvantages of analytical derivatization techniques are discussed. In addition, we discuss the future directions of analytical derivatization methods in environmental analysis and the potential challenges.

Ecofriendly laccases treatment to challenge micropollutants issue in municipal wastewaters

In this study, a multidisciplinary approach investigated the enzymatic degradation of micropollutants in real, not modified, municipal wastewaters of a plant located in Italy. Stir Bar Sorptive Extraction combined to Gas Chromatography-Mass Spectrometric detection (SBSE-GC-MS) was applied to profile targeted pollutants in wastewaters collected after the primary sedimentation (W1) and the final effluent (W2). Fifteen compounds were detected at ng/L - μg/L, including pesticides, personal care products (PCPs) and drugs. The most abundant micropollutants were bis(2-ethylhexyl) phthalate, diethyl phthalate and ketoprofen. Laccases of Trametes pubescens MUT 2400 were very active against all the target micropollutants: except few cases, their concentration was reduced more than 60%. Chemical analysis and environmental risk do not always come together. To verify whether the treated wastewaters can represent a stressor for the aquatic ecosystem, toxicity was also evaluated. Raphidocelis subcapitata and Lepidium sativum tests showed a clear ecotoxicity reduction, even though they did not evenly respond. Two in vitro tests (E-screen test and MELN assay) were used to evaluate the estrogenic activity. Treatments already operating in the plant (e.g. activated sludge) partially reduced the estradiol equivalent concentration, and it was almost negligible after the laccases treatment. The results of this study suggest that laccases of T. pubescens are promising biocatalysts for the micropollutants transformation in wastewaters and surface waters.

Fabrication of calixarene-grafted bio-polymeric magnetic composites for magnetic solid phase extraction of non-steroidal anti-inflammatory drugs in water samples

Calixarene framework functionalized bio-polymeric magnetic composites (MSp-TDI-calix) were synthesized and utilized as magnetic solid-phase extraction (MSPE) sorbent for the extraction of non-steroidal anti-inflammatory drugs (NSAIDs), namely indoprofen (INP), ketoprofen (KTP), ibuprofen (IBP) and fenoprofen (FNP), from environmental water samples. MSp-TDI-calix was characterized by FT-IR, XRD, FESEM, EDX, VSM and BET analysis, and the results were compared with Sp-TDI and Sp-TDI-calix. To maximize the extraction performance of MSp-TDI-calix decisive MSPE affective parameters such as sorbent amount, extraction time, sample volume, type of organic eluent, volume of organic eluent, desorption time and pH were comprehensively optimized prior to HPLC-DAD determination. The analytical validity of the proposed MSPE method was evaluated under optimized conditions and the following figures of merit were acquired: linearity with good determination coefficient (R² ≥ 0.991) over the concentration range of 0.5–500 µg/L, limits of detection (LODs) ranged from 0.06–0.26 µg/L and limits of quantitation (LOQ) between 0.20–0.89 µg/L. Excellent reproducibility and repeatability under harsh environment with inter-day and intra-day relative standard deviations were obtained in the range of 2.5–3.2% and 2.4–3.9% respectively. The proposed method was successfully applied for analysis of NSAIDs in tap water, drinking water and river water with recovery efficiency ranging from 88.1–115.8% with %RSD of 1.6–4.6%.

Determination of endocrine disrupting chemicals and antiretroviral compounds in surface water: A disposable sorptive sampler with comprehensive gas chromatography - Time-of-flight mass spectrometry and large volume injection with ultra-high performance liquid chromatography-tandem mass spectrometry

Many rural dwellers and inhabitants of informal settlements in South Africa are without access to treated water and collect untreated water from rivers and dams for personal use. Endocrine disrupting chemicals (EDCs) have been detected in surface water and wildlife of South Africa. EDCs are often present in complex environmental matrices at ultra-trace levels complicating detection thereof. We report a simplified multi-residue approach for the detection and quantification of EDCs, emerging EDCs, and antiretroviral drugs in surface water. A low cost (less than one US dollar), disposable, sorptive extraction sampler was prepared in-house. The disposable samplers consisted of polydimethylsiloxane (PDMS) tubing fashioned into a loop which was then placed in water samples to concentrate EDCs and emerging pollutants. The PDMS samplers were thermally desorbed directly in the inlet of a GC, thereby eliminating the need for expensive consumable cryogenics. Comprehensive gas chromatography coupled to time-of-flight mass spectrometry (GC×GC-TOFMS) was used for compound separation and identification. Linear retention indices of EDCs and emerging pollutants were determined on a proprietary Crossbond^® phase Rtx^®-CLPesticides II GC capillary column. In addition, large volume injection of surface water into an ultra-performance liquid chromatograph tandem mass spectrometer (UPLC-MS/MS) was used as complementary methodology for the detection of less volatile compounds. Large volume injection reduced tedious and costly sample preparation steps. Limits of detection for the GC method ranged from 1 to 98pg/l and for the LC method from 2 to 135ng/l. Known and emerging EDCs such as pharmaceuticals, personal care products and pesticides, as well as the antiretroviral compounds, efavirenz and nevirapine, were detected in surface water from South Africa at concentration levels ranging from 0.16ng/l to 227ng/l.

Analytical methods for the endocrine disruptor compounds determination in environmental water samples

The potential risk of exposure to different xenobiotics, which can modulate the endocrine system and represent a treat for the wellness of an increasing number of people, has recently drawn the attention of international environmental and health agencies. Several agents, characterized by structural diversity, may interfer with the normal endocrine functions that regulate cell growth, homeostasis and development. Substances such as pesticides, herbicides, plasticizers, metals, etc. having endocrine activity (EDCs) are used in agriculture and industry and are also used as drugs for humans and animals. A difficulty in the analytical determination of these substances is the complexity of the matrix in which they are present. In fact, the samples most frequently analyzed consist of groundwater and surface water, including influent and effluent of wastewater treatment plants and drinking water. In this review, several sample pretreatment protocols, assays and different instrumental techniques recently used in the EDCs determination have been considered. This review concludes with a paragraph in which the most recent hyphenated-instrument techniques are treated, highlighting their sensitivity and selectivity for the analyses of environmental water samples.

A new analytical method to determine non-steroidal anti-inflammatory drugs in surface water using in situ derivatization combined with ultrasound-assisted emulsification microextraction followed by gas chromatography-mass spectrometry

Because of the high stability and potential toxic effects of non-steroidal anti-inflammatory drugs (NSAIDs), it is important to closely monitor their concentrations in the environment using a sensitive analytical method. In this study, a simple, rapid, efficient, and sensitive analytical method based on gas chromatography-mass spectrometry (GC-MS) was developed to determine the levels of seven common NSAIDs in various types of surface water. To simplify sample preparation, in situ derivatization using methyl chloroformate was combined with ultrasound-assisted emulsification microextraction. For selection and optimization of significant variables, experiments were statistically designed using Plackett-Burman design and central composite design. The resulting optimal conditions for derivatization and extraction were 100 μL of chloroform (extraction solvent), 10.0 mL of sample, and 240 μL of pyridine (catalyst as a base in derivatization). The optimized sample preparation coupled with optimized GC-MS analysis in selected ion monitoring mode provided good linearity from 0.010 to 5.0 ng mL(-1), and a limit of detection between 0.0050 and 0.010 ng mL(-1), good intra-day and inter-day precision (0.30-6.3% and 5.1-9.5%, respectively), and good accuracy (relative recovery; 91-117% at 0.20 ng mL(-1) and 77-105% at 2.5 ng mL(-1)). Compared with previously reported methods, the current method requires a small volume of sample and simple sample preparation steps for sensitive determination of NSAID levels using a conventional GC-MS system. The method was successfully applied to determine the levels of seven common NSAIDs in various types of surface water.

Analysis of endocrine disrupting pesticides by capillary GC with mass spectrometric detection

Endocrine disrupting chemicals, among them many pesticides, alter the normal functioning of the endocrine system of both wildlife and humans at very low concentration levels. Therefore, the importance of method development for their analysis in food and the environment is increasing. This also covers contributions in the field of ultra-trace analysis of multicomponent mixtures of organic pollutants in complex matrices. With this fact conventional capillary gas chromatography (CGC) and fast CGC with mass spectrometric detection (MS) has acquired a real importance in the analysis of endocrine disrupting pesticide (EDP) residues. This paper provides an overview of GC methods, including sample preparation steps, for analysis of EDPs in a variety of matrices at ultra-trace concentration levels. Emphasis is put on separation method, mode of MS detection and ionization and obtained limits of detection and quantification. Analysis time is one of the most important aspects that should be considered in the choice of analytical methods for routine analysis. Therefore, the benefits of developed fast GC methods are important.

Determination of pharmaceuticals in biosolids using accelerated solvent extraction and liquid chromatography/tandem mass spectrometry

An analytical method was developed to quantitatively determine pharmaceuticals in biosolid (treated sewage sludge) from wastewater treatment plants (WWTPs). The collected biosolid samples were initially freeze dried, and grounded to obtain relatively homogenized powders. Pharmaceuticals were extracted using accelerated solvent extraction (ASE) under the optimized conditions. The optimal operation parameters, including extraction solvent, temperature, pressure, extraction time and cycles, were identified to be acetonitrile/water mixture (v/v 7:3) as extraction solvent with 3 extraction cycles (15 min for each cycle) at 100 °C and 100 bars. The extracts were cleaned up using solid-phase extraction followed by determination by liquid chromatography coupled with tandem mass spectrometry. For the 15 target pharmaceuticals commonly found in the environment, the overall method recoveries ranged from 49% to 68% for tetracyclines, 64% to 95% for sulfonamides, and 77% to 88% for other pharmaceuticals (i.e. acetaminophen, caffeine, carbamazepine, erythromycin, lincomycin and tylosin). The developed method was successfully validated and applied to the biosolid samples collected from WWTPs located in six cities in Michigan. Among the 15 target pharmaceuticals, 14 pharmaceuticals were detected in the collected biosolid samples. The average concentrations ranged from 2.6 μg/kg for lincomycin to 743.6 μg/kg for oxytetracycline. These results indicated that pharmaceuticals could survive wastewater treatment processes, and accumulate in sewage sludge and biosolids. Subsequent land application of the contaminated biosolids could lead to the dissemination of pharmaceuticals in soil and water environment, which poses potential threats to at-risk populations in the receiving ecosystems.

Current approaches to trace analysis of pharmaceuticals and personal care products in the environment

A large number of xenobiotics including pharmaceuticals and personal care products are continuously released into the environment. Effluents from sewage treatment plants are well known to be the major source for introduction of pharmaceuticals and personal care products into the aquatic system. In recent years, reliable methods have been established for residue analysis of these pollutants down to low ng/L levels. In this review, the different approaches to their trace determination are reviewed with special attention being paid to sample preparation procedures, state-of-the-art high-performance separation methods hyphenated with mass spectrometry, and immunochemical methods.

An overview of sample preparation and extraction of synthetic pyrethroids from water, sediment and soil

The latest developments in sample preparation and extraction of synthetic pyrethroids from environmental matrices viz., water, sediment and soil were reviewed. Though the synthetic pyrethroids were launched in 1970s, to the best of authors' knowledge there was no review on this subject until date. The present status and recent advances made during the last 10 years in sample preparation including conservation and extraction techniques used in determination of synthetic pyrethroids in water, sediment and soil were discussed. Pre- and post-extraction treatments, sample stability during extraction and its influence upon the whole process of analytical determination were covered. Relative merits and demerits including the green aspects of extraction were evaluated. The current trends and future prospects were also addressed.