Water-compatible molecularly imprinted polymer for the selective recognition of fluoroquinolone antibiotics in biological samples

Construction of a molecularly imprinted fluorescent sensor based on an amphiphilic block copolymer-metal-organic framework for the detection of oxytetracycline in milk

A metal-organic framework (MOF) is a good carrier for molecular imprinting due to its high surface area and strong adsorption capacity, but its poor dispersibility in aqueous solution is one of the significant drawbacks, which can severely impede its effectiveness. Amphiphilic block copolymers are good hydrophilic materials and have the potential to overcome the shortcomings of MOFs. In order to improve the hydrophilicity of molecularly imprinted fluorescent materials, we have applied a combination of molecularly imprinted technology and amphiphilic block copolymers on MOFs for the first time. Amphiphilic PAVE copolymer is selected as the molecular imprinted functional monomer to improve the hydrophilicity of UiO-66-NH2. The synthesized PAVE-MOF-MIP has adequate water dispersion ability and fluorescence activity. When encountering oxytetracycline, PAVE-MOF-MIP will produce fluorescence quenching, it is used to construct a fluorescence detection platform for oxytetracycline detection. Compared with traditional MIP@MOF, PAVE-MOF-MIP has better water dispersion ability and detection accuracy. Under optimal conditions, the linear range of oxytetracycline detection is 10-100 μmol L-1, and the minimum limit of detection (LOD) is 86 nmol L-1. This paper proposes a novel approach to use amphiphilic block copolymers as molecularly imprinted monomers on MOFs, providing an innovative idea that has not been previously explored.

A Sensor Array Based on Molecularly Imprinted Polymers and Machine Learning for the Analysis of Fluoroquinolone Antibiotics

Fluoroquinolones (FQs) are one of the most important types of antibiotics in the clinical, poultry, and aquaculture industries, and their monitoring is required as the abuse has led to severe issues, such as antibiotic residues and antimicrobial resistance. In this study, we report a voltammetric electronic tongue (ET) for the simultaneous determination of ciprofloxacin, levofloxacin, and moxifloxacin in both pharmaceutical and biological samples. The ET comprises four sensors modified with three different customized molecularly imprinted polymers (MIPs) and a nonimprinted polymer integrated with Au nanoparticle-decorated multiwall carbon nanotubes (Au-fMWCNTs). MWCNTs were first functionalized to serve as a supporting substrate, while the anchored Au nanoparticles acted as a catalyst. Subsequently, MIP films were obtained by electropolymerization of pyrrole in the presence of the different target FQs. The sensors' morphology was characterized by scanning electron microscopy and transmission electron microscopy, while the modification process was followed electrochemically step by step employing [Fe(CN)₆]^3-/4- as the redox probe. Under the optimal conditions, the MIP(FQs)@Au-fMWCNT sensors exhibited different responses, limits of detection of ca. 1 μM, and a wide detection range up to 300 μM for the three FQs. Lastly, the developed ET presents satisfactory agreement between the expected and obtained values when used for the simultaneous determination of mixtures of the three FQs (R² ≥0.960, testing subset), which was also applied to the analysis of FQs in commercial pharmaceuticals and spiked human urine samples.

Synthesis and evaluation of UiO-66@MIP towards norfloxacin in water

Norfloxacin (NOX), a kind of quinolone antibiotic, is widely used in disease treatment and the control of human and livestock products. Due to overuse, norfloxacin has become a common organic pollutant in water. We combine the high specific surface area and high stability of metal–organic frameworks with the high selectivity of molecularly imprinted polymers. By grafting a carbon–carbon double bond on the surface of UiO-66–NH₂, a molecularly imprinted layer is formed on the surface of UiO-66–NH₂ upon free radical polymerization. The saturated adsorption capacity of UiO-66@MIP reaches 58.01 mg g⁻¹. UiO-66@MIP exhibits high adsorption performance in real water samples and its recoveries range from 96.7% to 98.3%, which demonstrates a higher adsorption capacity and recovery than other molecularly imprinted materials and has potential applications in the removal of norfloxacin in real life.

In this study, UiO-66@MIP was synthesized to remove NOX. The ability of UiO-66@MIP to adsorb norfloxacin in actual wastewater was also explored.

NanoMIP-Based Solid Phase Extraction of Fluoroquinolones from Human Urine: A Proof-of-Concept Study

NanoMIPs that are prepared by solid phase synthesis have proven to be very versatile, but to date only limited attention has been paid to their use in solid phase extraction. Thus, since nanoMIPs show close similarities, in terms of binding behavior, to antibodies, it seems relevant to verify if it is possible to use them as mimics of the natural antibodies that are used in immunoextraction methods. As a proof-of-concept, we considered prepared nanoMIPs against fluoroquinolone ciprofloxacin. Several nanoMIPs were prepared in water with polymerization mixtures of different compositions. The polymer with the highest affinity towards ciprofloxacin was then grafted onto a solid support and used to set up a solid phase extraction–HPLC method with fluorescence detection, for the determination of fluoroquinolones in human urine. The method resulted in successful selection for the fluoroquinolone antibiotics, such that the nanoMIPs were suitable for direct extraction of the antibiotics from the urine samples at the µg mL−1 level. They required no preliminary treatment, except for a 1 + 9 (v/v) dilution with a buffer of pH 4.5 and they had good analyte recovery rates; up to 85% with precision in the range of 3 to 4.5%, without interference from the matrix. These experimental results demonstrate, for the first time, the feasibility of the use of nanoMIPs to develop solid phase extraction methods.

Synthesis of molecularly imprinted polymers for extraction of fluoroquinolones in environmental, food and biological samples

In recent years, fluoroquinolones have been found present in important water resources and food sources which compromises the food quality and availability, thereby, causing risks to the consumer. Despite the recent advancement in the development of analytical instrumentation for routine monitoring of fluoroquinolones in water, food, and biological samples, sample pre-treatment is still a major bottleneck of the analytical methods. Therefore, fast, selective, sensitive, and cost-effective sample preparation methods prior to instrumental analysis for fluoroquinolones residues in environmental, food and biological samples are increasingly important. Solid-phase extraction using different adsorbents is one of the most widely used pre-concentration/clean-up techniques for analysis of fluoroquinolones. Molecularly imprinted polymers (MIPs) serve as excellent effective adsorbent materials for selective extraction, separation, clean-up and preconcentration of various pollutants in different complex matrices. Therefore, synthesis of MIPs remains crucial for their applications in sample preparation as this offers much-needed selectivity in the extraction of compounds in complex samples. In this study, the progress made in the synthesis of MIPs for fluoroquinolones and their applications in water, food and biological samples were reviewed. The present review discusses the selection of all the elements of molecular imprinting for fluoroquinolones, polymerization processes and molecular recognition mechanisms. In conclusion, the related challenges and gaps are given to offer ideas for future research focussing on MIPs for fluoroquinolones.

Molecularly imprinted polymers - towards electrochemical sensors and electronic tongues

Molecularly imprinted polymers (MIPs) are artificially synthesized materials to mimic the molecular recognition process of biological macromolecules such as substrate-enzyme or antigen-antibody. The combination of these biomimetic materials with electrochemical techniques has allowed the development of advanced sensing devices, which significantly improve the performance of bare or catalyst-modified sensors, being able to unleash new applications. However, despite the high selectivity that MIPs exhibit, those can still show some cross-response towards other compounds, especially with chemically analogous (bio)molecules. Thus, the combination of MIPs with chemometric methods opens the room for the development of what could be considered a new type of electronic tongues, i.e. sensor array systems,  based on its usage. In this direction, this review provides an overview of the more common synthetic approaches, as well as the strategies that can be used to achieve the integration of MIPs and electrochemical sensors, followed by some recent examples over different areas in order to illustrate the potential of such combination in very diverse applications.

Sample treatment based on molecularly imprinted polymers for the analysis of veterinary drugs in food samples: a review

The use of veterinary drugs in medical treatments and in the livestock industry is a recurrent practice. When applied in subtherapeutic doses over prolonged times, they can also act as growth promoters. However, residues of these substances in foods present a risk to human health. Their analysis is thus important and can help guarantee consumer safety. The critical point in each analytical technique is the sample treatment and the analytical matrix complexity. The present manuscript summarizes the development, type of synthesis, characterization, and application of molecularly imprinted polymers in the separation, identification, and quantification techniques for the determination of veterinary drug residues in food samples in extraction, clean-up, isolation, and pre-concentration systems. Synthesized sorbents with specific recognition properties improve the interactions between the analytes and the polymeric sorbents, providing better analysis conditions and advantages in comparison with commercial sorbents in terms of high selectivity, analytical sensitivity, easy performance, and low cost analysis.

Preparation of porous magnetic molecularly imprinted polymers for fast and specifically extracting trace norfloxacin residue in pork liver

Here, magnetic molecularly imprinted polymers were designed for norfloxacin via oil-in-water emulsifier-free emulsion method. It was prepared by simply mixing norfloxacin, methacrylic acid-co-ethylene glycol dimethacrylate copolymer, and Fe₃ O₄ together at room temperature. Characterized by multiple analytical tools, the particle size, pore size, pore volume, specific surface area, and saturation magnetization of the product were about 30 µm, 10-500 nm, 2.92 mL/g, 105.84 m² /g, and 3.052 emu/g, respectively. And the adsorption capacity was high at 27.04 mg/g towards norfloxacin. Combined with ultra high performance liquid chromatography, it was used to determine norfloxacin in real samples. Average recoveries were above 77.44% with relative standard deviations between 1.21 and 6.85% at three spiked levels (n = 3) for lake water and pork liver. The determination was achieved for the most complex biosample pork liver spiked with norfloxacin low to 30 ng/g, about 100 times less than the maximum residue limit regulated by Commission of the European Communities. All evidences demonstrated that the magnetic molecularly imprinted polymers can be used in practice for monitoring norfloxacin either in environmental water or meat product with high accuracy and reliability.

Controllably Prepared Aptamer-Molecularly Imprinted Polymer Hybrid for High-Specificity and High-Affinity Recognition of Target Proteins

Molecularly imprinted polymers (MIPs) and aptamers, as effective mimics of antibodies, can overcome only some drawbacks of antibodies. Since they have their own advantages and disadvantages, the combination of MIPs with aptamers could be an ideal solution to produce hybrid alternatives with improved properties and desirable features. Although quite a few attempts have been made in this direction, a facile and controllable approach for the preparation of aptamer-MIP hybrids still remains lacking. Herein, we present a new approach for facile and controllable preparation of aptamer-MIP hybrids for high-specificity and high-affinity recognition toward proteins. An aptamer that can bind the glycoprotein alkaline phosphatase (ALP) with relative weak affinity and specificity was used as a ligand, and controllable oriented surface imprinting was carried out with an in-water self-polymerization system of dopamine. A thin layer of polydopamine was formed to cover the template to an appropriate thickness. After removing the template from the polymer, an aptamer-MIP hybrid with apparently improved affinity and specificity toward ALP was obtained, giving cross-reactivity of 3.2-5.6% and a dissociation constant of 1.5 nM. With this aptamer-MIP hybrid, a plasmonic immunosandwich assay (PISA) was developed. Reliable detection of ALP in human serum by the PISA was demonstrated.

Advancements of molecularly imprinted polymers in the food safety field

Molecularly imprinted technology (MIT) has been widely employed to produce stable, robust and cheap molecularly imprinted polymer (MIP) materials that possess selective binding sites for recognition of target analytes in food, such as pesticides, veterinary drugs, mycotoxins, illegal drugs and so on. Because of high selectivity and specificity, MIPs have drawn great attention in the food safety field. In this review, the recent developments of MIPs in various applications for food safety, including sample preparation, chromatographic separation, sensing, immunoassay etc., have been summarized. We particularly discuss the advancements and limitations in these applications, as well as attempts carried out for their improvement.

Fabrication of polymer-modified magnetic nanoparticle based adsorbents for the capture and release of quinolones by manipulating the metal-coordination interaction

Functional polymers with a metal-coordination interaction have been fabricated for sample pretreatment. Poly(N-4-vinyl-benzyl iminodiacetic acid-co-methacrylic acid-co-styrene)-modified magnetic nanoparticles were prepared and used as solid-phase extraction adsorbents for the analysis of quinolones by tuning the metal-coordination interaction. In the construction of the polymer-based adsorbents, functional monomer (N-(4-vinyl)-benzyl iminodiacetic acid) and comonomers (methacrylic acid and styrene) were fabricated onto the magnetic nanoparticles by free radical polymerization. Factors affecting the performance of the adsorbents were investigated, and the results revealed that Fe³⁺ played a vital role in the formation of metal-coordination adsorbents. Compared with other compounds, the resultant adsorbents displayed good selectivity to quinolones due to the metal-coordination complex (N-4-vinyl-benzyl iminodiacetic acid-Fe³⁺ -quinolones). Interestingly, the captured quinolones could be rapidly released by manipulating the metal-coordination interaction with Cu²⁺ . The linearity range for analysis of the test quinolones was 0.025-2.0 μg/mL (R²  > 0.999), and the recovery varied from 80.0 to 100.7%. Further, the proposed adsorbents were combined with high-performance liquid chromatography for the analysis of quinolones in real urine samples. The results demonstrated that the prepared adsorbents have good selectivity and sensitivity for quinolones, showing great potential for drug analysis in real samples.

Preparation of a magnetic molecularly imprinted polymer for the selective adsorption of chlordiazepoxide and its determination by central composite design optimized HPLC

Core–shell magnetic molecularly imprinted polymer nanoparticles (MMIP-NPs) were prepared and applied in the extraction of chlordiazepoxide from various samples.

Internal Extractive Electrospray Ionization Mass Spectrometry for Quantitative Determination of Fluoroquinolones Captured by Magnetic Molecularly Imprinted Polymers from Raw Milk

Antibiotics contamination in food products is of increasing concern due to their potential threat on human health. Herein solid-phase extraction based on magnetic molecularly imprinted polymers coupled with internal extractive electrospray ionization mass spectrometry (MMIPs-SPE-iEESI-MS) was designed for the quantitative analysis of trace fluoroquinolones (FQs) in raw milk samples. FQs in the raw milk sample (2 mL) were selectively captured by the easily-lab-made magnetic molecularly imprinted polymers (MMIPs), and then directly eluted by 100 µL electrospraying solvent biased with +3.0 kV to produce protonated FQs ions for mass spectrometric characterization. Satisfactory analytical performance was obtained in the quantitative analysis of three kinds of FQs (i.e., norfloxacin, enoxacin, and fleroxacin). For all the samples tested, the established method showed a low limit of detection (LOD ≤ 0.03 µg L⁻¹) and a high analysis speed (≤4 min per sample). The analytical performance for real sample analysis was validated by a nationally standardized protocol using LC-MS, resulting in acceptable relative error values from −5.8% to +6.9% for 6 tested samples. Our results demonstrate that MMIPs-SPE-iEESI-MS is a new strategy for the quantitative analysis of FQs in complex biological mixtures such as raw milk, showing promising applications in food safety control and biofluid sample analysis.

Highly Reproducible Ag NPs/CNT-Intercalated GO Membranes for Enrichment and SERS Detection of Antibiotics

The increasing pollution of aquatic environments by antibiotics makes it necessary to develop efficient enrichment and sensitive detection methods for environmental antibiotics monitoring. In this work, silver nanoparticles and carbon nanotube-intercalated graphene oxide laminar membranes (Ag NPs/CNT-GO membranes) were successfully prepared for enrichment and surface-enhanced Raman scattering (SERS) detection of antibiotics. The prepared Ag NPs/CNT-GO membranes exhibited a high enrichment ability because of the π-π stacking and electrostatic interactions of GO toward antibiotic molecules, which enhanced the sensitivity of SERS measurements and enabled the antibiotics to be determined at sub-nM concentrations. In addition, the nanochannels created by the intercalation of CNTs into GO layers resulted in an 8-fold enhancement in the water permeance of Ag NPs/CNT-GO membranes compared to that of pure GO membranes. More importantly, the Ag NPs/CNT-GO membranes exhibited high reproducibility and long-term stability. The spot-to-spot variation in SERS intensity was less than 15%, and the SERS performance was maintained for at least 70 days. The Ag NPs/CNT-GO membranes were also used for SERS detection of antibiotics in real samples; the results showed that the characteristic peaks of antibiotics were obviously recognizable. Thus, the sensitive SERS detection of antibiotics based on Ag NPs/CNT-GO offers great potential for practical applications in environmental analysis.

Tyramine detection using PEDOT:PSS/AuNPs/1-methyl-4-mercaptopyridine modified screen-printed carbon electrode with molecularly imprinted polymer solid phase extraction

Tyramine (4-hydroxyphenethylamine), which is a monoamine metabolized by monoamine oxidase (MAO), exists widely in plants, animals, fermented foods, and salted foods. The incidence of hypertension, or "cheese effect", which is associated with a large dietary intake of tyramine while taking MAO inhibitors has been reported; therefore, the measurement of tyramine is an urgent concern. Herein, an efficient approach that integrates a molecular imprinting polymer for solid phase extraction (MISPE) technique with a sensitive electrochemical sensing platform (SPCE/PEDOT: PSS/AuNP/1-m-4-MP) for the quantification of tyramine is presented. Enhanced electrode conductivity was achieved sequentially by constructing a conductive polymer (PEDOT: PSS) on a screen-printed carbon electrode (SPCE), followed by electrodeposition with gold nanoparticles (AuNPs) and, finally, by modification with positively charged 1-methyl-4-mercaptopyridine (1-m-4-MP) using an Au-S bond. Tyramine was isolated selectively and pre-concentrated by the MISPE technique; electroanalysis that used differential pulse voltammetry (DPV) in NaOH (0.1M, pH 13) was conducted successively. Experimental parameters (such as modes of electrode modification, ratio of PEDOT: PSS, pH of electrolyte, time required for AuNP deposition, and 1-m-4-MP concentrations) that were associated with optimal detection conditions were evaluated also. We obtained a linear concentration range (5-100nM, R²=0.9939) with LOD and sensitivity at 2.31nM, and 3.11μAnM^-1cm^-2, respectively. The applicability of our technique was demonstrated by analyzing tyramine in spiked serum and milk. The feature of our newly developed analytical methods that coupled sample pre-treatment (sample clean-up and pre-concentration) with sensitive detection makes it a promising tool for quantifying of tyramine.

Oxytetracycline recovery from aqueous media using computationally designed molecularly imprinted polymers

Polymers for recovery/removal of the antimicrobial agent oxytetracycline (OTC) from aqueous media were developed with use of computational design and molecular imprinting. 2-Hydroxyethyl methacrylate, 2-acrylamide-2-methylpropane sulfonic acid (AMPS), and mixtures of the two were chosen according to their predicted affinity for OTC and evaluated as functional monomers in molecularly imprinted polymers and nonimprinted polymers. Two levels of AMPS were tested. After bulk polymerization, the polymers were crushed into particles (200-1000 μm). Pressurized liquid extraction was implemented for template removal with a low amount of methanol (less than 20 mL in each extraction) and a few extractions (12-18 for each polymer) in a short period (20 min per extraction). Particle size distribution, microporous structure, and capacity to rebind OTC from aqueous media were evaluated. Adsorption isotherms obtained from OTC solutions (30-110 mg L(-1)) revealed that the polymers prepared with AMPS had the highest affinity for OTC. The uptake capacity depended on the ionic strength as follows: purified water > saline solution (0.9 % NaCl) > seawater (3.5 % NaCl). Polymer particles containing AMPS as a functional monomer showed a remarkable ability to clean water contaminated with OTC. The usefulness of the stationary phase developed for molecularly imprinted solid-phase extraction was also demonstrated. Graphical Abstract Selection of functional monomers by molecular modeling renders polymer networks suitable for removal of pollutants from contaminated aqueous environments, under either dynamic or static conditions.

Determination of triazine herbicides from honey samples based on hydrophilic molecularly imprinted resins followed by high performance liquid chromatography-tandem mass spectrometry

A facile, novel and efficient approach to extract six triazine herbicides from honey samples based on hydrophilic molecularly imprinted resins (MIRs) was described.

Chitosan in Molecularly-Imprinted Polymers: Current and Future Prospects

Chitosan is widely used in molecular imprinting technology (MIT) as a functional monomer or supporting matrix because of its low cost and high contents of amino and hydroxyl functional groups. The various excellent properties of chitosan, which include nontoxicity, biodegradability, biocompatibility, and attractive physical and mechanical performances, make chitosan a promising alternative to conventional functional monomers. Recently, chitosan molecularly-imprinted polymers have gained considerable attention and showed significant potential in many fields, such as curbing environmental pollution, medicine, protein separation and identification, and chiral-compound separation. These extensive applications are due to the polymers' desired selectivity, physical robustness, and thermal stability, as well as their low cost and easy preparation. Cross-linkers, which fix the functional groups of chitosan around imprinted molecules, play an important role in chitosan molecularly-imprinted polymers. This review summarizes the important cross-linkers of chitosan molecularly-imprinted polymers and illustrates the cross-linking mechanism of chitosan and cross-linkers based on the two glucosamine units. Finally, some significant attempts to further develop the application of chitosan in MIT are proposed.

Experimental mixture design as a tool for the synthesis of antimicrobial selective molecularly imprinted monodisperse microbeads

The effect of the cross-linker on the shape and size of molecular imprinted polymer (MIP) beads prepared by precipitation polymerization has been evaluated using a chemometric approach. Molecularly imprinted microspheres for the selective recognition of fluoroquinolone antimicrobials were prepared in a one-step precipitation polymerization procedure using enrofloxacin (ENR) as the template molecule, methacrylic acid as functional monomer, 2-hydroxyethyl methacrylate as hydrophilic comonomer, and acetonitrile as the porogen. The type and amount of cross-linker, namely ethylene glycol dimethacrylate, divinylbenzene or trimethylolpropane trimethacrylate, to obtain monodispersed MIP spherical beads in the micrometer range was optimized using a simplex lattice design. Particle size and morphology were assessed by scanning electron microscopy, dynamic light scattering, and nitrogen adsorption measurements. Electron paramagnetic resonance spectroscopy in conjunction with a nitroxide as spin probe revealed information about the microviscosity and polarity of the binding sites in imprinted and nonimprinted polymer beads.

A triple-function zwitterion for preparing water compatible diclofenac imprinted polymers

A novel zwitterion acting as both a functional monomer and a crosslinker with the protein-resistant ability concomitantly was synthesized for preparing water compatible diclofenac imprinted polymers. This new imprinted polymer showed high imprinting efficiency for template and strong anti-protein adsorption in aqueous medium.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

Novel dummy molecularly imprinted polymers for matrix solid-phase dispersion extraction of eight fluoroquinolones from fish samples

A series of novel dummy molecularly imprinted polymers (DMIPs) were prepared as highly class-selective sorbents for fluoroquinolones. A non-poisonous dummy template, daidzein, was used for the first time to create specific molecular recognition sites for fluoroquinolones in the synthesized polymers. The influence of porogen polarity on dummy molecular imprinting effect was studied. The DMIP prepared using dimethylsulfoxide-acetonitrile (1:1.8, v/v) as porogen achieved the highest imprinting factors (IF) for fluoroquinolones over a range of IF 13.4-84.0. This DMIP was then used for selective extraction of eight fluoroquinolones (fleroxacin, ofloxacin, norfloxacin, pefloxacin, ciprofloxacin, lomefloxacin, enrofloxacin and gatifloxacin) from fish samples based on dummy molecularly imprinted matrix solid-phase dispersion (DMI-MSPD). The extracted fluoroquinolones were subsequently analyzed by high-performance liquid chromatography (HPLC) equipped with a fluorescence detector (FLD). The developed method had acceptable recoveries (64.4-102.7%) and precision (RSDs: 1.7-8.5%, n=5) for determination of fluoroquinolones in fish samples fortified at levels of 10 and 100ngg(-1). The limits of detection (LODs) for identification of eight fluoroquinolones ranged between 0.06 and 0.22ngg(-1). The results demonstrated great potential of the optimized method for sample preparation in routine analysis of trace fluoroquinolones in fish samples.

Multiresidue analysis of fluoroquinolone antimicrobials in chicken meat by molecularly imprinted solid-phase extraction and high performance liquid chromatography

This paper describes the synthesis of novel molecularly imprinted polymer (MIP) micro-beads for the selective extraction (MISPE) of six fluoroquinolone (FQ) antibiotics (enrofloxacin, ciprofloxacin, lomefloxacin, danofloxacin, sarafloxacin and norfloxacin) from chicken muscle samples and further analysis by high-performance liquid chromatography (HPLC) with fluorescence (FLD) or mass spectrometry (MS) detection. A combinatorial screening approach has been applied to select the optimal functional monomer and cross-linker formulation for polymer synthesis. The MIP prepared using enoxacin (ENOX) as the template - a mixture of methacrylic acid (MAA) and trifluoromethacrylic acid (TFMAA) as functional monomers and ethylene glycol dimethacrylate (EDMA) as the cross-linker - showed superior FQ recognition properties than the rest of the materials generated. MIP spherical particles were prepared using silica beads as sacrificial scaffolds. The polymers were packed in solid phase extraction (SPE) cartridges. The optimized MISPE-HPLC method allows the extraction of the antimicrobials from aqueous samples followed by a selective washing with acetonitrile/water (0.005% TFA, pH=3.0), 20:80 (v/v) and elution with 5% trifluoroacetic acid in methanol. Optimum MISPE conditions led to recoveries of the target FQs in chicken muscle samples ranging between 68 and 102% and precisions in the 3-4% range (RSD, n=18). The method has been validated according to European Union Decision 2002/657/EC, in terms of linearity, accuracy, precision, selectivity, decision limit (CCα) and detection capability (CCβ) by HPLC-FLD and HPLC-MS/MS. The limits of detection were improved using HPLC-MS/MS analysis and ranged between 0.2 and 2.7μgkg(-1) (S/N=3) for all the FQs tested.

Water-compatible molecularly imprinted microspheres in pipette tip solid-phase extraction for simultaneous determination of five fluoroquinolones in eggs

New water-compatible molecularly imprinted microspheres were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization using 3-(2-carboxyethylsulfanylthiocarbonyl-sulfanyl) propionic acid as a hydrophilic chain-transfer agent, and employed as the sorbent of pipet tip molecularly imprinted solid-phase extraction (PT-MISPE) for rapid extraction and screening of ofloxacin, pefloxacin, norfloxacin, ciprofloxacin, and enrofloxacin in eggs. In comparison to conventional SPE methods, the presented PT-MISPE showed special selectivity, easy operation, and accessible device without expensive SPE apparatus. The presented PT-MISPE method combined advantages of dummy molecularly imprinted polymers and pipet tip solid-phase extraction. The presented method was linear over a calibration range of 25-2500 μg/kg with the limits of detections of 0.53-1.07 μg/kg. Good recoveries (89.1-102.5%) were achieved with relative standard deviations of 2.6-4.8%.

Luminescent core-shell imprinted nanoparticles engineered for targeted Förster resonance energy transfer-based sensing

Red-luminescent 200 nm silica nanoparticles have been designed and prepared as a versatile platform for developing FRET (Förster resonance energy transfer) biomimetic assays. Ru(phen)₃²⁺ dye molecules embedded off-center in the silica core provide the long-lived donor emission, and a near-infrared labeled analyte serves as fluorescent acceptor (the measured R₀ of this D-A pair is 4.3 nm). A thin surface-grafted molecularly imprinted polymer (MIP) shell intervenes as selective enrofloxacin-binding element. These nanoparticles have been tested for photochemical detection of enrofloxacin by using a competitive scheme that can be readily performed in MeCN-HEPES (pH 7.5) 7:3 (v/v) mixtures and allows for the antibiotic detection in the μM range (LOD = 2 μM) without optimization of the assay. Given the well-known difficulties of coupling the target-binding-to-MIP and the transducing events, the novel photochemical approach tuned up here will be valuable in future developments of MIP-based assays and optosensors that capitalize also on the advantages of nanomaterials for (bio)analysis.

Molecularly imprinted polymeric microspheres with metalloporphyrin-based molecular recognition sites coassembled with methacrylic acid

Molecularly imprinted polymeric microspheres (MIPMs) for dimethyl methylphosphonate (DMMP) were prepared using methacrylic acid (MAA) and vinyl-substituted zinc(ii) porphyrin as functional monomers. The interactions of vinyl-substituted zinc(ii) porphyrin with DMMP were determined by ultraviolet–visible absorption spectroscopy. A comparison between the MIPMs-MAA that used only MAA with the MIPMs-zinc (Zn) + MAA that used both MAA and Zn porphyrin as functional monomers revealed that the MIPMs-Zn + MAA showed higher binding ability for DMMP. By the Scatchard analysis, the results of the equilibrium adsorption test showed that the MIPM-DMMP only had one affinity binding site. The dissociation constants of MIPMs-Zn + MAA and MIPMs-MAA were 0.167 and 0.338 mmol/L, respectively, and the maximum absorption quantities were 148 and 13.57 μmol/g, respectively. The MIPMs-Zn + MAA possessed the higher selectivity for DMMP as shown by the isotherm binding test. These results revealed that the MIPMs-Zn + MAA had highly specific binding sites because they were assembled by the two functional monomers, vinyl-substituted Zn(ii) porphyrin and MAA, which coordinated to achieve specific binding with DMMP.