Electrochemical quantification of reactive oxygen and nitrogen: challenges and opportunities

Review on oxidative stress relation on COVID-19: Biomolecular and bioanalytical approach

COVID-19 disease has put life of people in stress worldwide from many aspects. Since the virus has mutated in absolutely short period of time the challenge to find a suitable vaccine has become harder. Infection to COVID-19, especially at severe life threatening states is highly dependent on the strength of the host immune system. This system is partially dependent on the balance between oxidative stress and antioxidant. Besides, this virus still has unknown mechanism of action companied by a probable commune period. From another hand, some reactive oxygen species (ROS) levels can be helpful on the state determination of the disease. Thus it could be possible to use modern bioanalytical techniques for their detection and determination, which could indicate the disease state at the golden time window since they have the potential to show whether specific DNA, RNA, enzymes and proteins are affected. This also could be used as a preclude study or a reliable pathway to define the best optimized time of cure beside effective medical actions. Herein, some ROS and their relation with SARS-CoV-2 virus have been considered. In addition, modern bioelectroanalytical techniques on this approach from quantitative and qualitative points of view have been reviewed.

Deciphering Evolution Pathway of Supported NO3 • Enabled via Radical Transfer from •OH to Surface NO3 - Functionality for Oxidative Degradation of Aqueous Contaminants

NO₃ ^• can compete with omnipotent ^•OH/SO₄ ^•- in decomposing aqueous pollutants because of its lengthy lifespan and significant tolerance to background scavengers present in H₂O matrices, albeit with moderate oxidizing power. The generation of NO₃ ^•, however, is of grand demand due to the need of NO₂ ^•/O₃, radioactive element, or NaNO₃/HNO₃ in the presence of highly energized electron/light. This study has pioneered a singular pathway used to radicalize surface NO₃ ^- functionalities anchored on polymorphic α-/γ-MnO₂ surfaces (α-/γ-MnO₂-N), in which Lewis acidic Mn^2+/3+ and NO₃ ^- served to form ^•OH via H₂O₂ dissection and NO₃ ^• via radical transfer from ^•OH to NO₃ ^- (^•OH → NO₃ ^•), respectively. The elementary steps proposed for the ^•OH → NO₃ ^• route could be energetically favorable and marginal except for two stages such as endothermic ^•OH desorption and exothermic ^•OH-mediated NO₃ ^- radicalization, as verified by EPR spectroscopy experiments and DFT calculations. The Lewis acidic strength of the Mn^2+/3+ species innate to α-MnO₂-N was the smallest among those inherent to α-/β-/γ-MnO₂ and α-/γ-MnO₂-N. Hence, α-MnO₂-N prompted the rate-determining stage of the ^•OH → NO₃ ^• route (^•OH desorption) in the most efficient manner, as also evidenced by the analysis on the energy barrier required to proceed with the ^•OH → NO₃ ^• route. Meanwhile, XANES and in situ DRIFT spectroscopy experiments corroborated that α-MnO₂-N provided a larger concentration of surface NO₃ ^- species with bi-dentate binding arrays than γ-MnO₂-N. Hence, α-MnO₂-N could outperform γ-MnO₂-N in improving the collision frequency between ^•OH and NO₃ ^- species and in facilitating the exothermic transition of NO₃ ^- functionalities to surface NO₃ ^• analogues per unit time. These were corroborated by a greater efficiency of α-MnO₂-N in decomposing phenol, in addition to scavenging/filtration control runs and DFT calculations. Importantly, supported NO₃ ^• species provided 5-7-fold greater efficiency in degrading textile wastewater than conventional ^•OH and supported SO₄ ^•- analogues we discovered previously.

Electrochemical sensor based on the Mn3O4/CeO2 nanocomposite with abundant oxygen vacancies for highly sensitive detection of hydrogen peroxide released from living cells

Based on the strategy of increasing the number of oxygen vacancies to improve the catalytic performance, we have developed a novel electrochemical sensor based on the multivalent metal oxides cerium dioxide and manganous oxide (Mn₃O₄/CeO₂) for reliable determination of extracellular hydrogen peroxide (H₂O₂) released from living cells. The Mn₃O₄/CeO₂ nanocomposite was characterized by high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The electrochemical performance of the Mn₃O₄/CeO₂ nanocomposite modified glassy carbon electrode (Mn₃O₄/CeO₂/GCE) was investigated. Owing to the abundant oxygen vacancies and strong synergistic effect between the multivalent Ce and Mn, the sensor exhibited excellent catalytic activity and selectivity for the electrochemical detection of H₂O₂ with a low quantitation limit of 2 nM. Moreover, Mn₃O₄/CeO₂/GCE exhibited excellent reproducibility, repeatability, and long-term storage stability. Because of these remarkable analytical advantages, the constructed sensor was able to determine H₂O₂ released from living cells with satisfactory results. The results showed that the Mn₃O₄/CeO₂ sensor is a promising candidate for a nanoenzymatic H₂O₂ sensor with the possibility of applications in physiology and diagnosis.

Photoluminescence Response in Carbon Nanomaterials to Enzymatic Degradation

Myeloperoxidase (MPO), a key enzyme released by neutrophils during inflammation, has been shown to catalyze the biodegradation of carbon nanomaterials. In this work, we perform photoluminescence studies on the MPO-catalyzed oxidation of graphene oxide (GO) and surfactant-coated pristine (6,5) single-walled carbon nanotubes (SWCNTs). The enzymatic degradation mechanism involves the introduction of defects, which promotes further degradation. Interestingly, the photoluminescence responses of GO and SWCNTs to enzymatic degradation are counterposed. Although the near-infrared (NIR) fluorescence intensity of SWCNTs at 998 nm is either unchanged or decreases depending on the surfactant identity, the blue fluorescence intensity of GO at 440 nm increases with the progression of oxidation by MPO/H₂O₂/Cl^- due to the formation of graphene quantum dots (GQDs). Turn-on GO fluorescence is also observed with neutrophil-like HL-60 cells, indicative of potential applications of GO for imaging MPO activity in live cells. Based on these results, we further construct two ratiometric sensors using SWCNT/GO nanoscrolls by incorporating surfactant-wrapped pristine SWCNTs as the internal either turn-off (with sodium cholate (SC)) or reference (with carboxymethylcellulose (CMC)) sensor. The ratiometric approach enables the sensors to be more stable to external noise by providing response invariant to the absolute intensity emitted from the sensors. Our sensors show linear response to MPO oxidative machinery and hold the promise to be used as self-calibrating carbon nanomaterial-based MPO activity indicators.

Hydrogel-Based Technologies for the Diagnosis of Skin Pathology

Hydrogels, swellable hydrophilic polymer networks fabricated through chemical cross-linking or physical entanglement are increasingly utilized in various biomedical applications over the past few decades. Hydrogel-based microparticles, dressings and microneedle patches have been explored to achieve safe, sustained and on-demand therapeutic purposes toward numerous skin pathologies, through incorporation of stimuli-responsive moieties and therapeutic agents. More recently, these platforms are expanded to fulfill the diagnostic and monitoring role. Herein, the development of hydrogel technology to achieve diagnosis and monitoring of pathological skin conditions are highlighted, with proteins, nucleic acids, metabolites, and reactive species employed as target biomarkers, among others. The scope of this review includes the characteristics of hydrogel materials, its fabrication procedures, examples of diagnostic studies, as well as discussion pertaining clinical translation of hydrogel systems.

"Turn-on" ratiometric electrochemical detection of H2O2 in one drop of whole blood sample via a novel microelectrode sensor

Oxidative stress plays an important role in the pathogenesis of many diseases, while the exact mechanism that hydrogen peroxide (H₂O₂) as one of the most abundant reactive oxygen species (ROS) exerts its influence on oxidative stress remains unclear. We developed a novel turn-on ratiometric electrochemical sensor for the detection of H₂O₂ in blood samples. The electrochemical probe 5-(1,2-dithiolan-3-yl)-N-(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)pent-anamide (BA) was designed and synthesized for the selective detection of H₂O₂ via a one-step amide reaction. Meanwhile, Nile Blue A (NB) was optimized as an internal reference molecule, thus enabling accurate quantification of H₂O₂ in a complex environment. BA and NB were then co-assembled onto a carbon fiber microelectrode (CFME) coated with Au cones. The oxidation peak current ratio between BA and NB demonstrated good linearity with the logarithm of the H₂O₂ concentration values ranging from 0.5 μM to 400 μM with a low detection limit of 0.02 μM. The developed sensor showed remarkable selectivity against potential interferences in whole blood samples, especially for ascorbic acid, uric acid, and dopamine. In combination with the unique characteristics of CFME, such as a small size and good biocompatibility, the microsensor was used for rapid analysis of one drop of whole blood sample. This sensor not only creates a new platform for the detection of H₂O₂ in whole blood samples, but also provides a new design strategy of other ROS analysis for early diagnosis of ROS-related diseases, drug discovery processes, and pathological mechanisms.

Novel method for rapid toxicity screening of magnetic nanoparticles

Iron oxide nanoparticles have attracted a great deal of research interest and have been widely used in bioscience and clinical research including as contrast agents for magnetic resonance imaging, hyperthermia and magnetic field assisted radionuclide therapy. It is therefore important to develop methods, which can provide high-throughput screening of biological responses that can predict toxicity. The use of nanoelectrodes for single cell analysis can play a vital role in this process by providing relatively fast, comprehensive, and cost-effective assessment of cellular responses. We have developed a new method for in vitro study of the toxicity of magnetic nanoparticles (NP) based on the measurement of intracellular reactive oxygen species (ROS) by a novel nanoelectrode. Previous studies have suggested that ROS generation is frequently observed with NP toxicity. We have developed a stable probe for measuring intracellular ROS using platinized carbon nanoelectrodes with a cavity on the tip integrated into a micromanipulator on an upright microscope. Our results show a significant difference for intracellular levels of ROS measured in HEK293 and LNCaP cancer cells before and after exposure to 10 nm size iron oxide NP. These results are markedly different from ROS measured after cell incubation with the same concentration of NP using standard methods where no differences have been detected. In summary we have developed a label-free method for assessing nanoparticle toxicity using the rapid (less than 30 minutes) measurement of ROS with a novel nanoelectrode.

Evaluation of peroxidative stress of cancer cells in vitro by real-time quantification of volatile aldehydes in culture headspace

RATIONALE

Peroxidation of lipids in cellular membranes results in the release of volatile organic compounds (VOCs), including saturated aldehydes. The real-time quantification of trace VOCs produced by cancer cells during peroxidative stress presents a new challenge to non-invasive clinical diagnostics, which as described here, we have met with some success.

METHODS

A combination of selected ion flow tube mass spectrometry (SIFT-MS), a technique that allows rapid, reliable quantification of VOCs in humid air and liquid headspace, and electrochemistry to generate reactive oxygen species (ROS) in vitro has been used. Thus, VOCs present in the headspace of CALU-1 cancer cell line cultures exposed to ROS have been monitored and quantified in real time using SIFT-MS.

RESULTS

The CALU-1 lung cancer cells were cultured in 3D collagen to mimic in vivo tissue. Real-time SIFT-MS analyses focused on the volatile aldehydes: propanal, butanal, pentanal, hexanal, heptanal and malondialdehyde (propanedial), that are expected to be products of cellular membrane peroxidation. All six aldehydes were identified in the culture headspace, each reaching peak concentrations during the time of exposure to ROS and eventually reducing as the reactants were depleted in the culture. Pentanal and hexanal were the most abundant, reaching concentrations of a few hundred parts-per-billion by volume, ppbv, in the culture headspace.

CONCLUSIONS

The results of these experiments demonstrate that peroxidation of cancer cells in vitro can be monitored and evaluated by direct real-time analysis of the volatile aldehydes produced. The combination of adopted methodology potentially has value for the study of other types of VOCs that may be produced by cellular damage.

Electrochemical reactive oxygen species detection by cytochrome c immobilized with vertically aligned and electrochemically reduced graphene oxide on a glassy carbon electrode

Selective detection of hydrogen peroxide and superoxide based on a cytochrome c modified glassy carbon electrode.

Peroxynitrite Sensor Based on a Screen Printed Carbon Electrode Modified with a Poly(2,6-dihydroxynaphthalene) Film

For the first time the electropolymerization of 2,6-dihydroxynaphthalene (2,6-DHN) on a screen printed carbon electrode (SPCE) was investigated and evaluated for peroxynitrite (PON) detection. Cyclic voltammetry was used to electrodeposit the poly(2,6-DHN) on the carbon electrode surface. The surface morphology and structure of poly(2,6-DHN) film were investigated by SEM and FTIR analysis, and the electrochemical features by cyclic voltammetry. The poly(2,6-DHN)/SPCE sensor showed excellent electrocatalytic activity for PON oxidation in alkaline solutions at very low potentials (0-100 mV vs. Ag/AgCl pseudoreference). An amperometric FIA (flow injection analysis) system based on the developed sensor was optimized for PON measurements and a linear concentration range from 2 to 300 μM PON, with a LOD of 0.2 μM, was achieved. The optimized sensor inserted in the FIA system exhibited good sensitivity (4.12 nA·μM^-1), selectivity, stability and intra-/inter-electrode reproducibility for PON determination.

Highly Sensitive Electrochemical Biosensor for Evaluation of Oxidative Stress Based on the Nanointerface of Graphene Nanocomposites Blended with Gold, Fe3O4, and Platinum Nanoparticles

High levels of H2O2 pertain to high oxidative stress and are associated with cancer, autoimmune, and neurodegenerative disease, and other related diseases. In this study, a sensitive H2O2 biosensor for evaluation of oxidative stress was fabricated on the basis of the reduced graphene oxide (RGO) nanocomposites decorated with Au, Fe3O4, and Pt nanoparticles (RGO/AuFe3O4/Pt) modified glassy carbon electrode (GCE) and used to detect the released H2O2 from cancer cells and assess the oxidative stress elicited from H2O2 in living cells. Electrochemical behavior of RGO/AuFe3O4/Pt nanocomposites exhibits excellent catalytic activity toward the relevant reduction with high selection and sensitivity, low overpotential of 0 V, low detection limit of ∼0.1 μM, large linear range from 0.5 μM to 11.5 mM, and outstanding reproducibility. The as-prepared biosensor was applied in the measurement of efflux of H2O2 from living cells including healthy normal cells and tumor cells under the external stimulation. The results display that this new nanocomposites-based biosensor is a promising candidate of nonenzymatic H2O2 sensor which has the possibility of application in clinical diagnostics to assess oxidative stress of different kinds of living cells.

Evaluation of methods of detecting cell reactive oxygen species production for drug screening and cell cycle studies

Intracellular reactive oxygen species (ROS) production is essential to normal cell function. However, excessive ROS production causes oxidative damage and cell death. Many pharmacological compounds exert their effects on cell cycle progression by changing intracellular redox state and in many cases cause oxidative damage leading to drug cytotoxicity. Appropriate measurement of intracellular ROS levels during cell cycle progression is therefore crucial in understanding redox-regulation of cell function and drug toxicity and for the development of new drugs. However, due to the extremely short half-life of ROS, measuring the changes in intracellular ROS levels during a particular phase of cell cycle for drug intervention can be challenging. In this article, we have provided updated information on the rationale, the applications, the advantages and limitations of common methods for screening drug effects on intracellular ROS production linked to cell cycle study. Our aim is to facilitate biomedical scientists and researchers in the pharmaceutical industry in choosing or developing specific experimental regimens to suit their research needs.

Oxidative stress and antibiotic resistance in bacterial pathogens: state of the art, methodologies, and future trends

Despite the significant advances of modern medicine and the availability of a wide variety of antibiotics for the treatment of microbial infections, there is an alarming increase of multiresistant bacterial pathogens. This chapter discusses the status of bacterial resistance mechanisms and the relationship with oxidative stress and provides an overview of the methods used to assess oxidative conditions and their contribution to the antibiotic resistance.

Peroxynitrite activity of hemin-functionalized reduced graphene oxide

Conducting interfaces modified with reduced graphene oxide (rGO) have shown improved electrochemical response for different analytes. The efficient formation of functionalized rGO based materials is thus of current interest for the development of sensitive and selective biosensors. Herein, we report a simple and environmentally friendly method for the formation of a hemin-functionalized rGO hybrid nanomaterial that exhibits remarkable sensitivity to peroxynitrite (ONOO(-)) in solution. The hemin-functionalized rGO hybrid nanomaterial was formed by mixing an aqueous solution of graphene oxide (GO) with hemin and sonicating the suspension for 5 h at room temperature. In addition to playing a key role in biochemical and electrocatalytic reactions, hemin has been proven to be a good reducing agent for GO. The sensitivity of the peroxynitrite sensor is ≈7.5 ± 1.5 nA mM(-1) with a detection limit of 5 ± 1.5 nM.

Oxidative stress is related to the deleterious effects of heme oxygenase-1 in an in vivo neuroinflammatory rat model

Heme oxygenase-1 (HO-1) induction is associated with beneficial or deleterious effects depending on the experimental conditions adopted and the neurodegenerative rodent models used. The present study aimed first to evaluate the effects of cerebral HO-1 induction in an in vivo rat model of neuroinflammation by intrastriatal injection of quinolinic acid (QA) and secondly to explore the role played by reactive oxygen species (ROS) and free iron (Fe²⁺) derived from heme catabolism promoted by HO-1. Chronic I.P. treatment with the HO-1 inductor and substrate hemin was responsible for a significant dose-related increase of cerebral HO-1 production. Brain tissue loss, microglial activation, and neuronal death were significantly higher in rats receiving QA plus hemin (H-QA) versus QA and controls. Significant increase of ROS production in H-QA rat brain was inhibited by the specific HO-1 inhibitor ZnPP which supports the idea that ROS level augmentation in hemin-treated animals is a direct consequence of HO-1 induction. The cerebral tissue loss and ROS level in hemin-treated rats receiving the iron chelator deferoxamine were significantly decreased, demonstrating the involvement of Fe²⁺in brain ROS production. Therefore, the deleterious effects of HO-1 expression in this in vivo neuroinflammatory model were linked to a hyperproduction of ROS, itself promoted by free iron liberation.

Overview of significant examples of electrochemical sensor arrays designed for detection of nitric oxide and relevant species in a biological environment

Ultramicroelectrode sensor arrays in which each electrode, or groups of electrodes, are individually addressable are of particular interest for detection of several species concomitantly, by using specific sensing chemistry for each analyte, or for mapping of one analyte to achieve spatio-temporal analysis. Microfabrication technology, for example photolitography, is usually used for fabrication of these arrays. The most widespread geometries produced by photolithography are thin-film microdisc electrode arrays with different electrode distributions (square, hexagonal, or random). In this paper we review different electrochemical sensor arrays developed to monitor, in vivo, NO levels produced by cultured cells or sliced tissues. Simultaneous detection of NO and analytes interacting with or released at the same time as NO is also discussed.

Pro-oxidant properties of AZT and other thymidine analogues in macrophages: implication of the azido moiety in oxidative stress

Zidovudine (azidothymidine, AZT) was the first drug approved for human immunodeficiency virus (HIV) treatment. Unfortunately, AZT is known to lead to severe side effects, many of which are generally thought to result from increased reactive oxygen species (ROS) production. In this work, the pro-oxidative properties of AZT and other thymidine analogues were investigated electrochemically at microelectrodes. Macrophages pre-incubated with AZT were found to release significant amounts of reactive species, including H(2)O(2), ONOO(-), NO(*) and NO(2) (-). Interestingly, the total amounts of released species were the greatest when cells were incubated with azido-containing analogues. The pro-oxidative effect of these compounds decreased significantly when the free azide terminal group was modified by reaction with a triosmium cluster. As expected, thymidine incubation did not lead to any increase in overall ROS levels. This work implicates the azido moiety in AZT-induced oxidative stress.