Development of a multichannel flow-through chemiluminescence microarray chip for parallel calibration and detection of pathogenic bacteria

Highly Sensitive, Portable Detection System for Multiplex Chemiluminescence Analysis

Chemiluminescence (CL) has emerged as a critical tool for the sensing and quantification of various bioanalytes in virtually all clinical fields. However, the rapid nature of many CL reactions raises challenges for typical low-cost optical sensors such as cameras to achieve accurate and sensitive detection. Meanwhile, classic sensors such as photomultiplier tubes are highly sensitive but lack spatial multiplexing capabilities and are generally not suited for point-of-care applications outside a standard laboratory setting. To address this issue, in this paper, a miniaturized and versatile silicon-photomultiplier-based fiber-integrated CL device (SFCD) was designed for sensitive multiplex CL detection. The SFCD comprises a silicon photomultiplier array coupled to an array of high numerical aperture plastic optical fibers to achieve 16-plex detection. The optical fibers ensure efficient light collection while allowing the fixed detector to be mated with diverse sample geometries (e.g., circular or grid), simply by adjusting the fiber configuration. In a head-to-head comparison with a lens-based camera system featuring a cooled detector, the SFCD achieved a 14-fold improved limit of detection in both direct and enzyme-mediated CL reactions. The SFCD also features improved compactness and lower cost, as well as faster temporal resolution compared with camera-based systems while preserving spatial multiplexing and good environmental robustness. Thus, the SFCD has excellent potential for point-of-care biosensing applications.

A microfluidic biosensor for rapid simultaneous detection of waterborne pathogens

A microfluidic based biosensor was investigated for rapid and simultaneous detection of Salmonella, Legionella, and Escherichia coli O157:H7 in tap water and wastewater. The biosensor consisted of two sets of focusing electrodes connected in parallel and three sets of interdigitated electrodes (IDE) arrays. The electrodes enabled the biosensor to concentrate and detect bacteria at both low and high concentrations. The focusing region was designed with vertical metal sidewall pairs and multiple tilted thin-film finger pairs to generate positive dielectrophoresis (p-DEP) to force the bacteria moving toward the microchannel centerline. As a result, the bacterial pathogens were highly concentrated when they reached the detection electrode arrays. The detection IDE arrays were coated with three different antibodies against the target bacterial pathogens and a cross-linker to enhance the binding of antibodies to the detection electrode. As the binding of bacterial pathogen to its specific antibodies took place, the impedance value changed. The results demonstrated that the biosensors were capable of detecting Salmonella, Legionella, and E. coli 0157:H7 simultaneously with a detection limit of 3 bacterial cells/ml in 30 - 40 min.

Advances in Optical Detection of Human-Associated Pathogenic Bacteria

Bacterial infection is a global burden that results in numerous hospital visits and deaths annually. The rise of multi-drug resistant bacteria has dramatically increased this burden. Therefore, there is a clinical need to detect and identify bacteria rapidly and accurately in their native state or a culture-free environment. Current diagnostic techniques lack speed and effectiveness in detecting bacteria that are culture-negative, as well as options for in vivo detection. The optical detection of bacteria offers the potential to overcome these obstacles by providing various platforms that can detect bacteria rapidly, with minimum sample preparation, and, in some cases, culture-free directly from patient fluids or even in vivo. These modalities include infrared, Raman, and fluorescence spectroscopy, along with optical coherence tomography, interference, polarization, and laser speckle. However, these techniques are not without their own set of limitations. This review summarizes the strengths and weaknesses of utilizing each of these optical tools for rapid bacteria detection and identification.

Heteroresistant Bacteria Detected by an Extended Raman-Based Antibiotic Susceptibility Test

Worldwide, multiresistant bacterial strains are emerging at unprecedented rates. This development seriously threatens the ability of humanity to treat even common infections, resulting in disability and death. Furthermore, this development endangers all medical achievements including cancer therapy or organ transplantations. Therefore, the World Health Organization has endorsed antimicrobial resistance as a great threat to humanity. To still allow effective treatment of patients, rapid, automated, and reliable antibiotic susceptibility testing (AST) of bacterial pathogens is essential. Thereby, speed and sensitivity of the AST results are crucial for improving patient care. Here, Raman spectroscopy as a nondestructive technique providing chemical-specific information is employed to monitor the deuterium uptake of metabolically active bacteria during antibiotic treatment, enabling fast and reliable AST. For this purpose, a bulk sample-preparation method was developed, allowing a high-throughput analysis of a significant number of cells. A protocol was developed for Gram-positive (Enterococcus faecalis) and Gram-negative (Escherichia coli) reference strains and was tested on 51 clinical isolates with well-characterized resistance phenotypes against ampicillin, ciprofloxacin, meropenem, and vancomycin. Borderline resistant and heteroresistant phenotypes were observed and further investigated. This is of critical importance as the sensitive detection of low-frequency heteroresistance in bacterial populations is a huge challenge. Such isolates seem susceptible but are resistant to treatment in vivo. Automatable analysis detects strong phenotypes within 3 h. On the basis of experimental and modeled data, heteroresistance is estimated to be detectable down to frequencies of 10^-6 and investigated on clinical isolates as a proof-of-concept study, but requiring longer incubation time.

Microarray Strategies for Exploring Bacterial Surface Glycans and Their Interactions With Glycan-Binding Proteins

Bacterial surfaces are decorated with distinct carbohydrate structures that may substantially differ among species and strains. These structures can be recognized by a variety of glycan-binding proteins, playing an important role in the bacteria cross-talk with the host and invading bacteriophages, and also in the formation of bacterial microcolonies and biofilms. In recent years, different microarray approaches for exploring bacterial surface glycans and their recognition by proteins have been developed. A main advantage of the microarray format is the inherent miniaturization of the method, which allows sensitive and high-throughput analyses with very small amounts of sample. Antibody and lectin microarrays have been used for examining bacterial glycosignatures, enabling bacteria identification and differentiation among strains. In addition, microarrays incorporating bacterial carbohydrate structures have served to evaluate their recognition by diverse host/phage/bacterial glycan-binding proteins, such as lectins, effectors of the immune system, or bacterial and phagic cell wall lysins, and to identify antigenic determinants for vaccine development. The list of samples printed in the arrays includes polysaccharides, lipopoly/lipooligosaccharides, (lipo)teichoic acids, and peptidoglycans, as well as sequence-defined oligosaccharide fragments. Moreover, microarrays of cell wall fragments and entire bacterial cells have been developed, which also allow to study bacterial glycosylation patterns. In this review, examples of the different microarray platforms and applications are presented with a view to give the current state-of-the-art and future prospects in this field.

Detecting Biothreat Agents: From Current Diagnostics to Developing Sensor Technologies

Although a fundamental understanding of the pathogenicity of most biothreat agents has been elucidated and available treatments have increased substantially over the past decades, they still represent a significant public health threat in this age of (bio)terrorism, indiscriminate warfare, pollution, climate change, unchecked population growth, and globalization. The key step to almost all prevention, protection, prophylaxis, post-exposure treatment, and mitigation of any bioagent is early detection. Here, we review available methods for detecting bioagents including pathogenic bacteria and viruses along with their toxins. An introduction placing this subject in the historical context of previous naturally occurring outbreaks and efforts to weaponize selected agents is first provided along with definitions and relevant considerations. An overview of the detection technologies that find use in this endeavor along with how they provide data or transduce signal within a sensing configuration follows. Current "gold" standards for biothreat detection/diagnostics along with a listing of relevant FDA approved in vitro diagnostic devices is then discussed to provide an overview of the current state of the art. Given the 2014 outbreak of Ebola virus in Western Africa and the recent 2016 spread of Zika virus in the Americas, discussion of what constitutes a public health emergency and how new in vitro diagnostic devices are authorized for emergency use in the U.S. are also included. The majority of the Review is then subdivided around the sensing of bacterial, viral, and toxin biothreats with each including an overview of the major agents in that class, a detailed cross-section of different sensing methods in development based on assay format or analytical technique, and some discussion of related microfluidic lab-on-a-chip/point-of-care devices. Finally, an outlook is given on how this field will develop from the perspective of the biosensing technology itself and the new emerging threats they may face.

Application of microfluidics in waterborne pathogen monitoring: a review

A review of the recent advances in microfluidics based systems for the monitoring of waterborne pathogens is provided in this article. Emphasis has been made on existing, commercial and state-of-the-art systems and research activities in laboratories worldwide. The review separates sample processing systems and monitoring systems, highlighting the slow progress made in automated sample processing for monitoring of pathogens in waterworks and in the field. Future potential directions of research are also highlighted in the conclusions.

Point-of-care platforms

Point-of-care applications are gaining increasing interest in clinical diagnostics and emergency applications. Biosensors are used to monitor the biomolecular interaction process between a disease biomarker and a recognition element such as a reagent. Essential are the quality and selectivity of the recognition elements and assay types used to improve sensitivity and to avoid nonspecific interactions. In addition, quality measures are influenced by the detection principle and the evaluation strategies. For these reasons, this review provides a survey and validation of recognition elements, assays, and various types of detection methods for point-of-care testing (POCT) platforms. Common applications of clinical parameters are discussed and considered. In this ever-changing field, a snapshot of current applications is needed. We provide such a snapshot by way of a table including literature citations and also discuss these applications in more detail throughout.

Microfluidic biosensor array with integrated poly(2,7-carbazole)/fullerene-based photodiodes for rapid multiplexed detection of pathogens

A multiplexed microfluidic biosensor made of poly(methylmethacrylate) (PMMA) was integrated into an array of organic blend heterojunction photodiodes (OPDs) for chemiluminescent detection of pathogens. Waterborne Escherichia coli O157:H7, Campylobacter jejuni and adenovirus were targeted in the PMMA chip, and detection of captured pathogens was conducted by poly(2,7-carbazole)/fullerene OPDs which showed a responsivity over 0.20 A/W at 425 nm. The limits of chemiluminescent detection were 5 × 10⁵ cells/mL for E. coli, 1 × 10⁵ cells/mL for C. jejuni, and 1 × 10⁻⁸ mg/mL for adenovirus. Parallel analysis for all three analytes in less than 35 min was demonstrated. Further recovery tests illustrated the potential of the integrated biosensor for detecting bacteria in real water samples.

Impact of immobilization support on colorimetric microarrays performances

We report here a comparison of support materials for colorimetric hybridization assays on microarrays. Four surfaces with various chemistries and architectures (roughness and porosity) were evaluated: (i) bare and (ii) activated polystyrene surfaces classically used for ELISA; (iii) a double-sided adhesive support; and (iv) a porous nitrocellulose/cellulose acetate membrane. Each substrate was functionalized with a microarray of probes and subjected to an enzymatic colorimetric DNA hybridization test. Tests were carried out in a 96-well assembly suitable for automated high-throughput analysis. Colorimetry results, microscopy observations and a chemiluminescence study showed that the test efficiency not only depends on the surface probe density but that the capacity of the material to retain the colored enzymatic product is also a critical parameter. All parameters being considered, the adhesive coated surface proposes the best surface properties for efficient colorimetric microarrays.

Biosensors for the analysis of microbiological and chemical contaminants in food

Increases in food production and the ever-present threat of food contamination from microbiological and chemical sources have led the food industry and regulators to pursue rapid, inexpensive methods of analysis to safeguard the health and safety of the consumer. Although sophisticated techniques such as chromatography and spectrometry provide more accurate and conclusive results, screening tests allow a much higher throughput of samples at a lower cost and with less operator training, so larger numbers of samples can be analysed. Biosensors combine a biological recognition element (enzyme, antibody, receptor) with a transducer to produce a measurable signal proportional to the extent of interaction between the recognition element and the analyte. The different uses of the biosensing instrumentation available today are extremely varied, with food analysis as an emerging and growing application. The advantages offered by biosensors over other screening methods such as radioimmunoassay, enzyme-linked immunosorbent assay, fluorescence immunoassay and luminescence immunoassay, with respect to food analysis, include automation, improved reproducibility, speed of analysis and real-time analysis. This article will provide a brief footing in history before reviewing the latest developments in biosensor applications for analysis of food contaminants (January 2007 to December 2010), focusing on the detection of pathogens, toxins, pesticides and veterinary drug residues by biosensors, with emphasis on articles showing data in food matrices. The main areas of development common to these groups of contaminants include multiplexing, the ability to simultaneously analyse a sample for more than one contaminant and portability. Biosensors currently have an important role in food safety; further advances in the technology, reagents and sample handling will surely reinforce this position.

Analytical chemiluminescence and bioluminescence: latest achievements and new horizons

Chemiluminescence (CL) and bioluminescence (BL) are the detection techniques of choice for the development of highly sensitive analytical methods, from immunoassays and nucleic acid hybridization assays to whole-cell biosensors. Nevertheless, basic and applied research on CL and BL aimed at further improving their analytical performance is still very active. This research covers diverse and complementary fields, including (among others) enhancing the light emission efficiency of CL systems, the use of nanomaterials to catalyze or enhance CL/BL reactions, the study of BL proteins to elucidate the color modulation mechanism, the discovery of new BL systems, the production of thermostable BL protein mutants with altered emission spectra, the development of BL imaging techniques to expand our understanding of living systems, and the implementation of CL/BL detection in miniaturized analytical devices. In the near future, we expect even greater diffusion of CL/BL-based analytical methods, especially in portable analytical devices intended for applications ranging from environmental analysis to companion diagnostics for personalized medicine.

Multiplex bioanalytical methods for food and environmental monitoring

Recent advances in miniaturization of analytical systems and newly emerging technologies offer platforms with greater automation and multiplexing capabilities than traditional biological binding assays. Multiplexed bioanalytical techniques provide control agencies and food industries with new possibilities for improved, more efficient monitoring of food and environmental contaminants. This review deals with recent developments in planar-array and suspension-array technologies, and their applications in detecting pathogens, food allergens and adulterants, toxins, antibiotics and environmental contaminants.

Dual amplification strategy for the fabrication of highly sensitive interleukin-6 amperometric immunosensor based on poly-dopamine

An electrochemical immunosensor was studied for sensitive detection of Interleukin-6 (IL-6) based on a dual amplification mechanism resulting from Au nanoparticles (AuNP)-Poly-dopamine (PDOP) as the sensor platform and multienzyme-antibody functionalized AuNP-PDOP@carbon nanotubes (CNT). The stable and robust film, PDOP, was used to immobilize biomolecules not only for the construction of the sensor platform, but also for the signal labeling. Sensitivity was greatly amplified by using the special platform of AuNP-PDOP and synthesizing horseradish peroxidase (HRP)-antibody (Ab(2)) functionalized AuNP-PDOP@carbon nanotubes (CNT). A linear response range of IL-6 from 4.0 to 8.0 × 10(2) pg mL(-1) with a low detection limit of 1.0 pg mL(-1) was obtained by the amperometry determination. Measurements of IL-6 in human serum gave excellent correlations with standard ELISA assays. Moreover, the immunosensor exhibited high selectivity, good reproducibility, and stability.

Quantum dot-based array for sensitive detection of Escherichia coli

A fluorescent quantum dot-based antibody array, used in sandwich format, has been developed to detect Escherichia coli O157:H7. Numerous parameters such as solid support, optimal concentration of immunoreagents, blocking reagents, and assay time were optimized for array construction. Quantum dot-conjugated anti-IgG was used as the detecting system. The array allows the detection of E. coli O157:H7 at concentrations below 10 CFU mL(-1) without sample enrichment, exhibiting an increase of three orders of magnitude in the limit of detection compared to ELISA. The interference caused by Gram (+) and Gram (-) bacteria was negligible at low concentrations of bacteria.

Direct immobilisation of antibodies on a bioinspired architecture as a sensing platform

A sensitive and selective immunosensor for the nonlabeled detection of sulfate-reducing bacteria (SRB) is constructed using a self-polymerised polydopamine film as the immobilisation platform. Self-polymerisation of dopamine is used as a powerful approach for applying multifunctional coatings onto the surface of a gold electrode. The polydopamine film is used not only as the immobilisation platform, but also as a cross-linker reagent for the immobilisation of the anti-SRB antibody. The polydopamine film is loaded with a high density of anti-SRB antibodies linked to the substrate to obtain high response signals. The formation and fabrication of the biosensor and the quantification of antibody anchoring are monitored, and SRB detection is performed by either quartz crystal microbalance (QCM) or electrochemical impedance spectroscopy (EIS). After modeling the impedance Nyquist plots of the SRB/anti-SRB/polydopamine/gold electrode for increasing concentrations of SRB, the electron transfer resistance (R(ct)) is used as a measure of immunocomplex binding. The R(ct) is correlated with the concentration of bacterial cells in the range of 1.8×10(2) to 1.8×10(6) CFU mL(-1); the detection limit is 50 CFU mL(-1). This work demonstrates a new immobilisation platform for the development of a sensitive and label-less impedimetric and piezoelectric immunosensor. This immunosensor may be broadly applied in clinical diagnoses and the monitoring of water environmental pollution. The method proposed is distinct in its ease of application, use of a simple protocol, and mild reaction conditions. These allow it to be applied to a wide variety of materials.