Ionic liquids supported on magnetic nanoparticles as a sorbent preconcentration material for sulfonylurea herbicides prior to their determination by capillary liquid chromatography

A Review on Recent Innovations of Pretreatment and Analysis Methods for Sulfonylurea Herbicides

Sulfonylurea herbicides (SUHs) are widely used in agriculture because of their low dosage, low cost, and high selectivity. However, due to improper use and lack of effective management, their residues pose a threat to the human health through environment and food pollution. Therefore, there is a need for simple, quick, economical, and effective methods to analyze SUHs in plant-derived foods, crops, and environmental samples. The present article presents a comprehensive review of the pretreatment and analytical technologies used for SUHs in various sample matrices, focusing on the developments since 2010. The main pretreatment methods include liquid-liquid extraction, solid-phase extraction, QuEChERS, and different microextraction methods, whereas analytical methods mainly include liquid chromatography coupled with different detectors, capillary electrophoresis, among others. In addition, the present study also compared the advantages and disadvantages of the methods and the future development is prospected.

Amino functionalized magnetic covalent organic framework for magnetic solid-phase extraction of sulfonylurea herbicides in environmental samples from tobacco land

An amino-functionalized magnetic covalent organic framework composite TpBD-(NH2 )2 @Fe3 O4 (Tp=Tp1,3,5-triformylphloroglucinol, BD-(NH2 )2 is 3,3',4,4'-biphenyltetramine) was prepared by post-synthesis modification. Due to its abundant benzene rings and amino groups, large specific surface area and porous structure, the prepared TpBD-(NH2 )2 @Fe3 O4 exhibits high extraction efficiency toward sulfonylurea herbicides. Based on this, a new method of magnetic solid-phase extraction with TpBD-(NH2 )2 @Fe3 O4 as the sorbent combined with high-performance liquid chromatography and ultraviolet detection was developed for trace analysis of sulfonylurea herbicides in environmental water, soil and tobacco leaves samples from tobacco land. Under the optimized conditions, the limits of detection within 0.05-0.14 μg/L were achieved with a high enrichment factor of 217-260-fold, and the relative standard deviations were 4.9-7.5% (n = 7, c = 0.5 μg/L). The linear range was around three orders of magnitude with the square of correlation coefficient higher than 0.9936. The method was applied to analyze five sulfonylurea herbicides in the environmental water, soil, and tobacco leave samples collected from tobacco land. No sulfonylurea herbicides were detected in these samples. The recoveries of target sulfonylurea herbicides in spiked environmental water, soil, and tobacco leaf samples were found in the range of 90.7-104, 70.7-99.0, and 59.3-97.8%, respectively. The results illustrate that the established TpBD-(NH2 )2 @Fe3 O4 -magnetic solid-phase extraction- high-performance liquid chromatography-ultraviolet detection method is efficient for the analysis of trace sulfonylurea herbicides in environmental samples.

Ionic liquid and magnetic multiwalled carbon nanotubes for extraction of N-methylcarbamate pesticides from water samples prior their determination by capillary electrophoresis

A simple and rapid microextraction procedure is reported on the use of ionic liquid (IL) in combination with magnetic multiwalled carbon nanotubes (MMWCNTs). The procedure is based on temperature-controlled IL dispersive liquid phase microextraction (DLPME) and MMWCNTs, for selective preconcentration of N-methylcarbamate pesticides in water samples, followed by their hydrolysis in alkaline buffer, prior to being analyzed by capillary electrophoresis. The extraction procedure uses small volume of organic solvents, and there is no need for centrifugation. In the experimental approach the IL was quickly disrupted by an ultrasonic probe, heated with the temperature controlled at 90 °C and dispersed in water samples in a homogenous form. At this stage, N-methylcarbamate pesticides migrate into the IL. Then the solution was cooled and small amounts of MMWCNTs were dispersed into the sample solutions to adsorb the ionic liquid containing the analytes and phase separation was completed. The ionic liquid allowed the microextraction of the analytes and a small volume of dichloromethane (DCM) was used for elution. MMWCNTs favored the adsorption of the ionic liquid with the analytes and improved the final recovery with respect to the use of simple magnetic nanoparticles as a sorbent material. Under the optimum conditions, limit of quantifications (LOQ) were achieved in the 5.6-9.3 ng mL^-1 range, with recoveries between 85.0% and 102.4%.

A Novel Metal-Organic Framework Composite, MIL-101(Cr)@MIP, as an Efficient Sorbent in Solid-Phase Extraction Coupling with HPLC for Tribenuron-Methyl Determination

A highly efficient and selective method based on core–shell molecularly imprinted polymers (MIL@MIP) and high performance liquid chromatography (HPLC) was developed and firstly used for the trace analysis of tribenuron-methyl (TBM) in complicated matrices. The MIL@MIP was prepared by surface molecular-imprinting technique, specially using MIL-101 as core, TBM as template molecule, methacrylic acid (MAA) as functional monomer, ethylene glycol dimethacrylate (EGDMA) as cross-linker, and azobisisobutyronitrile (AIBN) as initiator. The resulting MIL@MIP showed high affinity, recognition specificity, fast mass transfer rate, and efficient adsorption performance towards TBM with the adsorption capacity reaching up to 3.217 mg/g. It also showed high cross-selectivity for TBM among its six kinds of chemical structure analogues. Furthermore, using the MIL@MIP as solid-phase extraction (SPE) materials, the recoveries of TBM determined by HPLC were 84.6-92.3%, 93.3-106.7%, and 88.9-93.3% in the spiked river water, soil, and soybean samples, respectively, with the limit of detection of 0.3 ng/L, 1.5 ng/kg, and 1.5 ng/kg, accordingly. It was proved that the developed HPLC-MISPE method was fast, accurate, and sensitive for detecting the trace TBM in river water, soil, and soybean samples.

Preparation of ionic liquid-modified SiO2@Fe3O4nanocomposite as a magnetic sorbent for use in solid-phase extraction of zinc(ii) ions from milk and water samples

A sorbent based on silica-coated magnetite nanoparticles modified with triethoxysilylpropylpyridinium hexafluorophosphate ionic liquid was synthesized and used for preconcentration of zinc(ii) ions.

Silica nanoparticle based techniques for extraction, detection, and degradation of pesticides

Silica nanoparticles (SiNPs) find applications in the fields of drug delivery, catalysis, immobilization and sensing. Their synthesis can be mediated in a facile manner and they display broad range compatibility and stability. Their existence in the form of spheres, wires and sheets renders them suitable for varied purposes. This review summarizes the use of silica nanostructures in developing techniques for extraction, detection and degradation of pesticides. Silica nanostructures on account of their sorbent properties, porous nature and increased surface area allow effective extraction of pesticides. They can be modified (with ionic liquids, silanes or amines), coated with molecularly imprinted polymers or magnetized to improve the extraction of pesticides. Moreover, they can be altered to increase their sensitivity and stability. In addition to the analysis of pesticides by sophisticated techniques such as High Performance Liquid Chromatography or Gas chromatography, silica nanoparticles related simple detection methods are also proving to be effective. Electrochemical and optical detection based on enzymes (acetylcholinesterase and organophosphate hydrolase) or antibodies have been developed. Pesticide sensors dependent on fluorescence, chemiluminescence or Surface Enhanced Raman Spectroscopic responses are also SiNP based. Moreover, degradative enzymes (organophosphate hydrolases, carboxyesterases and laccases) and bacterial cells that produce recombinant enzymes have been immobilized on SiNPs for mediating pesticide degradation. After immobilization, these systems show increased stability and improved degradation. SiNP are significant in developing systems for effective extraction, detection and degradation of pesticides. SiNPs on account of their chemically inert nature and amenability to surface modifications makes them popular tools for fabricating devices for 'on-site' applications.

Extraction and determination of sulfonylurea herbicides in water and soil samples by using ultrasound-assisted surfactant-enhanced emulsification microextraction and analysis by high-performance liquid chromatography

An ultrasound-assisted surfactant-enhanced emulsification microextraction (UASEME) with low-density extraction solvents was developed for the extraction of sulfonylurea herbicides from water and soil samples prior to high-performance liquid chromatography coupled with ultraviolet detection (HPLC-UV). In this technique, a surfactant was used as emulsifier which could enhance the dispersion of water-immiscible extraction solvent into aqueous phase and was favorable for the mass-transfer of the analytes from aqueous phase to organic phase. The target analytes were extracted into an extraction phase (Aliquat-336 in 1-octanol) and dispersed in an aqueous solution. After extraction and phase separation, the organic solvent on top of the solution was withdrawn into a syringe and 20 µL of it was injected into a HPLC instrument for analysis. Influential factors in extraction were investigated and optimized. Under optimum experimental conditions, calibration curve was linear in the concentration range from 1 to 100 µg/L, with coefficients of estimation (R(2) values) varying from 0.9928 to 0.9952, and satisfactory repeatabilities (4.7<RSDs%<6.1) were attained. High preconcentration factors were achieved ranging from 103 to 153. Applicability of the method to the extraction of sulfonylurea herbicides from different types of complicated matrices, such as water and soil samples, was studied. The obtained results indicated that the proposed method is efficient, fast and inexpensive for extraction and determination of sulfonylurea herbicides in environmental aqueous and soil samples.

Ionic-liquid-micelle-functionalized mesoporous Fe3O4 microspheres for ultraperformance liquid chromatography determination of anthraquinones in dietary supplements

A magnetic solid-phase extraction method using ionic liquid (IL)-micelle-functionalized mesoporous Fe3O4 microspheres (MFMs) was proposed for the preconcentration of anthraquinones in dietary supplements. The analytes were then determined by ultraperformance liquid chromatography combined with an ultraviolet detector. The extraction parameters, such as the choice of ILs, the concentrations of ILs and MFMs, the pH of diluent, and the concentration of acetic acid in the eluent, were presented. Under the optimized conditions, the limits of detection and limits of quantitation were 0.4-2.8 ng mL(-1) and 1.4-9.4 ng mL(-1), respectively. The accuracy of the proposed method was investigated by recovery in herb and granules of Radix et Rhizoma Rhei, yielding values between 89.25% and 96.48%. The use of the proposed method in the sample pretreatment of complex dietary supplements is feasible due to the high surface area and excellent adsorption capacity of MFMs after modification with IL.

Dispersive micro-solid phase extraction based on self-assembling, ionic liquid-coated magnetic particles for the determination of clofentezine and chlorfenapyr in environmental water samples

Two ionic liquid-coated-Fe3O4 magnetic particles (IL-Fe3O4 MPs) were developed for use in two types of dispersive micro-solid phase extraction (D-μ-SPE) for the high-performance liquid chromatographic analysis of clofentezine and chlorfenapyr in environmental water samples. Self-assembling IL-Fe3O4 MPs were used in D-μ-SPE as adsorbents. Two D-μ-SPE extraction methods, namely, direct dispersive micro-solid phase extraction (d-D-μ-SPE) and in situ solvent formation-based dispersive micro-solid phase extraction (ISF-D-μ-SPE), were proposed, using [C8MIM][PF6] to extract analytes through two pathways. Lower IL doses were required in the extraction process compared with those in other IL-based methods. Fe3O4 MPs can also be recycled and reused after extraction and are thus environmentally friendly. These newly developed methods were demonstrated to be feasible for use in the quantitation of clofentezine and chlorfenapyr at trace levels, with lower limit of detection values ranging from 0.4 to 0.5 ng mL(-1) for d-D-μ-SPE and 0.4 ng mL(-1) for ISF-D-μ-SPE. Finally, relative standard deviations of less than 6.0% were obtained.