Enzymeless determination of total sugar by luminol-tetrachloroaurate chemiluminescence on chip to analyze food samples

Bifunctional oxidase-peroxidase mimicking Fe-Ce MOF on paper-based analytical devices to intensify luminol chemiluminescence: Application for measuring different sugars with a smartphone readout

This study presents a potent paper-based analytical device (PAD) for quantifying various sugars using an innovative bi-nanozyme made from a 2-dimensional Fe/Ce metal-organic framework (FeCe-BTC). The MOF showed excellent bifunctional peroxidase-oxidase activities, efficiently catalyzing luminol's chemiluminescence (CL) reaction. As a peroxidase-like nanozyme, FeCe-BTC could facilitate the dissociation of hydrogen peroxide (H2O2) into hydroxyl radicals, which then oxidize luminol. Additionally, it was also discovered that when reacting with H2O2, the MOF turns into a mixed-valence MOF, and acts as an oxidase nanozyme. This activity is caused by the generated Ce4+ ions in the structure of MOF that can directly oxidize luminol. The MOF was directly synthesized on the PAD and cascaded with specific natural enzymes to establish simple, rapid, and selective CL sensors for the measurement of different sugars. A cell phone was also used to record light intensities, which were then correlated to the analyte concentration. The designed PAD showed a wide linear range of 0.1-10 mM for glucose, fructose, and sucrose, with detection limits of 0.03, 0.04, and 0.04 mM, respectively. It showed satisfactory results in food and biological samples with recovery values ranging from 95.8 to 102.4 %, which makes it a promising candidate for point-of-care (POC) testing for food control and medicinal purposes.

The yield and quality of Pleurotus abieticola grown on nematode-infected Pinus massoniana chips

In this study, we investigated the use of nematode-infected Pinus massoniana chips (NPC) as the main ingredient in Pleurotus abieticola substrate. The effects of different substrate formulas on nutritional parameters, including total sugars, polysaccharides, proteins, lipids, amino acids, and fatty acids were assessed. The results indicated that NPC was suitable for P. abieticola cultivation. However, the addition of certain amounts of corncobs (CC) and cottonseed hulks (CH) improved the yield. Substrate T5 (45% NPC, 6% CC, and 27% CH) had the greatest yield (121.38 g per bag), 34.56% greater than the yield of the control (78% poplar chips), which was 79.43 g per bag. Across the 11 substrate formulas tested, the total sugar, polysaccharide, crude protein, and crude lipid contents were 16.60-28.90%, 2.71-3.73%, 36.49-45.42%, and 1.03-4.34%, respectively. On all substrates, the fruiting bodies contained 17 amino acids, primarily glutamine (2.42-4.11%), followed by proline (2.56-3.73%), leucine (2.09-3.19%), phenylalanine (1.56-2.61%), and glycine (1.76-2.55%). The fruiting bodies contained 12 fatty acids, of which linoleic acid was the most abundant (82.36%-84.03%), followed by palmitic acid (6.42%-6.89%) and oleic acid (5.50%-7.34%). The fatty acid content was closely associated with the NPC content, which might indicate that NPC promoted fatty acid accumulation. Thus, NPC represents a new substrate suitable for P. abieticola cultivation.

Effects of corn stalk cultivation substrate on the growth of the slippery mushroom (Pholiota microspora)

Corn stalks are a major source of agricultural waste in China that have the potential for more efficient utilisation. In this study, we designed substrate formulas with different proportions of corn stalks to cultivate Pholiota microspora. The substrate formula for P. microspora cultivation that could partially or completely replace sawdust with corn stalks was selected through the analysis of mycelial growth rates, fruiting body traits, yield, biological efficiency, nutrients, and mineral composition. Our results showed that the substrate formula T2 (38% wood chips and 38% corn stalks) resulted in the highest yield of 275.66 ± 2.87 g per bag, which was 6.60% higher than that of formula CK, and the highest biological efficiency of 90.75 ± 0.04%, which was 4.58% higher than that of CK, with no significant differences from CK in terms of fruiting body traits, nutrients, or mineral composition. The substrate formula T1 (19% corn stalks) led to mushroom yields with the highest mineral and amino acid contents and was thus more suitable for the cultivation of medicinal P. microspora. Therefore, substrates comprising a mixture of corn stalks and sawdust can be used as a novel, inexpensive, and high-yield alternative for the cultivation of P. microspora.

3-Hydroxyphenylboronic Acid-Based Carbon Dot Sensors for Fructose Sensing

The selective fluorescence sensing of fructose was achieved by fluorescence quenching of the emission of hydrothermal-synthesized carbon quantum dots prepared by 3-hydroxyphenylboronic acid. Quantification of fructose was possible in aqueous solutions with pH of 9 (Limit of Detection L_OD and Limit of Quantification L_OQ of 2.04 and 6.12 mM), by quenching of the emission at 376 nm and excitation ~380 nm with a linearity range of 0-150 mM. A Stern-Volmer constant (K_SV) of 2.11 × 10^-2 mM^-1 was obtained, while a fluorescent quantum yield of 31% was calculated. The sensitivity of this assay towards fructose was confirmed by comparison with other sugars (such as glucose, sucrose and lactose). Finally, the validity of the proposed assays was further demonstrated by performing recovery assays in different matrixes. Graphical Abstract.

Luminol-based chemiluminescent signals: clinical and non-clinical application and future uses

Chemiluminescence (CL) is an important method for quantification and analysis of various macromolecules. A wide range of CL agents such as luminol, hydrogen peroxide, fluorescein, dioxetanes and derivatives of oxalate, and acridinium dyes are used according to their biological specificity and utility. This review describes the application of luminol chemiluminescence (LCL) in forensic, biomedical, and clinical sciences. LCL is a very useful detection method due to its selectivity, simplicity, low cost, and high sensitivity. LCL has a dynamic range of applications, including quantification and detection of macro and micromolecules such as proteins, carbohydrates, DNA, and RNA. Luminol-based methods are used in environmental monitoring as biosensors, in the pharmaceutical industry for cellular localization and as biological tracers, and in reporter gene-based assays and several other immunoassays. Here, we also provide information about different compounds that may enhance or inhibit the LCL along with the effect of pH and concentration on LCL. This review covers most of the significant information related to the applications of luminol in different fields.

Study on the proteins-luminol binding by use of luminol as a fluorescence probe

In this paper, a new mathematical equation of lg(F0-F)/F=1/nlg[P]+1/nlgKa, which was used to obtain interaction parameters (the binding constant Ka and the number of binding sites n) between the protein and the small molecule ligand by using the ligand as a fluorescence (FL) probe, was constructed for the first time. The interaction parameters between myoglobin, catalase, lysozyme, bovine serum albumin (BSA) and luminol were obtained by this equation with luminol used as a FL probe, showing that the binding constants Ka were 8.78×10(5), 4.47×10(5), 4.21×10(4) and 3.95×10(4) respectively, and the number of binding sites n approximately equaled to 1.0 for myoglobin, catalase, and 2.0 for lysozyme, BSA. The interactions of ferritin, ovalbumin, aldolase, chymotrypsinogen and ribonuclease with luminol were also studied by this method. The binding constants Ka were at 10(4)-10(5) level, and the number of binding sites n mostly approximately equaled to 2.0. The binding ability of luminol to the studied proteins followed the pattern: myoglobin>aldolase>ferritin>ovalbumin>catalase>ribonuclease>lysozyme>BSA>chymotrypsinoge.