Facile preparation of organic-inorganic hybrid polymeric ionic liquid monolithic column with a one-pot process for protein separation in capillary electrochromatography

Review of recent advances in development and applications of organic-silica hybrid monoliths

Organic-silica hybrid monoliths attracted attention as an alternative to extensively researched organic polymer-based and silica-based counterparts. The development and applications of these materials as extraction and separation media in capillary liquid chromatography and capillary electrochromatography were previously reviewed in several manuscripts. In this review, we will concentrate on work published since mid-2016 focusing on advances in their development using sol-gel chemistry of tetra- and trialkoxysilanes and subsequent surface modification with organic monomers, and "one-pot" strategy incorporating sol-gel chemistry of alkoxysilanes and free-radical polymerization, ring-opening polymerization, or thiol-based click polymerization with organic monomers. Approaches adapted to the preparation of hybrid monoliths made with polyhedral oligomeric silsesquioxanes will be covered as well.

Determination of benzimidazoles in fruits by open-tubular capillary electrochromatography based on ionic liquids grafted covalent organic frameworks

A novel capillary electrochromatography method has been developed for the simultaneous quantification of ten benzimidazole fungicides in fruits. Herein, covalent organic frameworks (COFs) and ionic liquids (ILs) were successfully introduced to prepare open-tubular capillary column to improve the loading capacity and separation performance. The parameters effecting the analytical performance including pH and concentration of running buffer, separation voltage and the addition of organic solvent were investigated systematically. Under the optimized conditions, the method allowed the baseline separation of ten benzimidazole fungicides, and showed a good linearity in the range of 3.5-200 μg kg^-1 with the detection limits between 1.0 and 2.8 μg kg^-1. The intraday and interday precisions for recoveries were lower than 7.9% and 12.2%, respectively. Intraday and interday precisions for their retention times were lower than 3.2% and 6.6%, respectively. Satisfactory recoveries for grape, pear and orange samples at two concentrations were obtained ranging from 85.0 to 95.9% with RSDs lower than 7.8%, demonstrating the potential applications of the open-tubular capillary electrochromatography method for trace benzimidazole fungicides analysis in fruits.

Selective Adsorption of Hemoglobin in Human Whole Blood with a Nickel Monosubstituted Silicotungstic Acid Hybrid

A nickel monosubstituted polyoxometalate (POM)/polyaniline organic-inorganic hybrid SiW₁₁Ni/PANI was synthesized using the liquid-phase method at room temperature to achieve the solidification of water-soluble POMs. The SiW₁₁Ni/PANI hybrid was characterized by scanning electron microscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy, X-ray diffraction, and zeta potential. On the basis of π-π stacking and affinity interaction between the SiW₁₁Ni/PANI hybrid and proteins, the SiW₁₁Ni/PANI hybrid showed good adsorption selectivity to hemoglobin (Hb). At pH 7.0, 0.5 mg of SiW₁₁Ni/PANI resulted in an adsorption efficiency of 92.4% for 1 mL of 100 μg mL^-1 Hb. The adsorption behavior of Hb on the surface of the hybrid fitted with the Langmuir model, and the maximum adsorption capacity was 692 mg g^-1. The adsorbed Hb was eluted by BR (0.04 mol L^-1, pH 9), providing a recovery of 94%. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis assay results indicated that the Hb in human whole blood could selectively be adsorbed by the SiW₁₁Ni/PANI hybrid, and the obtained Hb was with high purity. It could expand the application of POMs in life science due to the application of the POM hybrid in protein isolation/purification.

β-Cyclodextrin covalent organic framework-modified organic polymer monolith as a stationary phase for combined hydrophilic and hydrophobic aqueous capillary electrochromatographic separation of small molecules

A β-Cyclodextrin covalent organic framework (β-CD COF) was successfully prepared under ambient temperature with a mild chemistry strategy from heptakis(6-amino-6-deoxy)-β-cyclodextrin and terephthalaldehyde. It was embedded into the poly[(glycidyl methacrylate)-co-(ethylene dimethacrylate)] [poly(GMA-co-EDMA)] monolith and served as the β-CD COF material-incorporated monolith. The synthetic materials were characterized by field emission scanning electron microscopy, energy-dispersive X-ray mapping analysis, transmission electron microscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy, and N₂ adsorption-desorption isotherm. The β-CD COF material-incorporated monolith achieved baseline separation in capillary electrochromatographic separation of three amides, three amino acids, three nucleosides, four aromatic acids, and three positional isomers (with resolution values of three amides, 1.75 and 1.54; three amino acids, 5.24 and 1.75; three nucleosides, 2.56 and 1.77; four aromatic acids, 6.96, 2.74, and 1.64; three positional isomers, 1.61 and 1.50). In comparison with the original monolith, the β-CD COF material-incorporated monolith shows significantly enhanced resolution for mixed molecules. The effect of pH and concentration of buffer and applied voltage were discussed in detail. The fabricated monolith showed good stability and reproducibility (relative standard deviation (RSD) < 6.9%). Molecular modeling illuminated the interactions between the small molecules and stationary phase, and provided a sufficient theoretical basis for experimental data. Graphical abstract Schematic presentation of the preparation of β-cyclodextrin covalent organic framework (β-CD COF) material-incorporated organic polymer monolith for separating the amides, amino acids, nucleosides, aromatic acids, and positional isomers. β-CD COF materials were synthesized and incorporated into the monolith as the stationary phase. Then, the incorporated monolith was applied in the capillary electrochromatography system for separating small molecules.

Recent Advances in Capillary Electrochromatography of Proteins and Carbohydrates in the Biopharmaceutical and Biomedical Field

Capillary electrochromatography (CEC) is a powerful hybrid separation technique that combines capillary electrophoresis and capillary chromatography, capable to address the analytical challenges of proteomics and glycomics. The focus of this paper is to review the recent developments in capillary electrochromatography of proteins and carbohydrates. The different column types applied in capillary electrochromatography such as packed bed, open tubular and monoliths are conferred in detail with respective separation examples. A comprehensive comparison is also given listing the mostly utilized coating methods, stationary phase materials and column preparation methods. The choice of porogenic solvent combinations for monolithic column fabrication is thoroughly discussed, paying close attention to the fine tuning options for the separation driving electroosmotic flow. Application examples of CEC in process analytical technology for the biopharmaceutical and biomarker discovery in the biomedical fields are also given.

An organic polymer monolith modified with an amino acid ionic liquid and graphene oxide for use in capillary electrochromatography: application to the separation of amino acids, β-blockers, and nucleotides

The preparation of an organic polymer monolithic column modified with an amino acid ionic liquid and graphene oxide (AAIL-GO) and its application to capillary electrochromatography (CEC) was described. The AAIL tetramethylammonium-L-arginine was bonded to a monolithic column that was previously modified with graphene oxide by using an hydrochloride/N-hydroxysuccinimide coupling reaction. The morphology of a poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolith was examined by scanning electron microscopy. The incorporation of AAIL and graphene oxide was detected by infrared spectroscopy and elemental analysis. The resulting monolithic column produced a strong and stable electroosmotic flow from the anode to the cathode in the pH range from 3 to 9. Compared with a column modified with AAIL or graphene oxide only, the AAIL-GO-modified column has a better separation ability for amino acids, β-blockers, and nucleotides (the resolution of three amino acids: 2.231 and 2.036, β-blockers: 2.779 and 2.470 and nucleotides: 8.345 and 3.321). Molecular modeling was applied to demonstrate the separation mechanism of small molecules which showed a good support for experimental results. Graphical abstract Schematic representation of capillary electrochromatography (CEC) systems with an amino acid ionic liquid-graphene oxide modified organic polymer monolithic column as stationary phases for separation of amino acids, β-blockers, and nucleotides.

Ionic liquid-copolymerized monolith incorporated with zeolitic imidazolate framework-8 as stationary phases for enhancing reversed phase selectivity in capillary electrochromatography

A novel ionic liquid (1-allyl-methylimidazolium chloride, AlMeIm⁺Cl^-) polymer monolith poly(ionic liquid-co-ethylene dimethacrylate) incorporated with zeolitic imidazolate framework-8 (ZIF-8-poly(IL-co-EDMA)) was firstly synthesized as stationary phases of monolithic column for capillary electrochromatography by one-step copolymerization. Incorporation of ZIF-8 into ionic liquid polymer monolith evidently enhanced the separation selectivity for four alkylbenzenes in reversed phase capillary electrochromatography (CEC), due to the synergistic effect derived from the same imidazole ring structure of ionic liquid and organic ligands of ZIF-8. Meanwhile, electroosmotic flow (EOF) was generated by ionic liquid in a wide range of pH values from 2.0 to 12.0. The resultant monolithic columns were characterized by scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR). The results indicated that the prepared monolithic columns had good permeability and mechanism stability. The resultant monolithic columns were applied for the separation of neutral compounds, anilines and phenols. The highest column efficiency was 2.07 × 10⁵ plates m^-1 (theoretical plates, N) for toluene. Under optimal conditions, reproducibility was obtained with relative standard deviations (RSDs) of the retention time for run-to-run, day-to-day, column-to-column and batch-to-batch were in the range of 1.58 - 3.19%, 1.92 - 3.87%, 3.84 - 4.96% and 2.63 - 4.33%, respectively. Incorporation ZIF-8 into ionic liquid polymer monolith was a promising way for the application of new materials in the fabrication of novel monolithic columns.

Monolith columns for liquid chromatographic separations of intact proteins: A review of recent advances and applications

In this article we survey 256 references (with an emphasis on the papers published in the past decade) on monolithic columns for intact protein separation. Protein enrichment and purification are included in the broadly defined separation. After a brief introduction, we describe the types of monolithic columns and modes of chromatographic separations employed for protein separations. While the majority of the work is still in the research and development phase, papers have been published toward utilizing monolithic columns for practical applications. We survey these papers as well in this review. Characteristics of selected methods along with their pros and cons will also be discussed.

Fabrication of an ionic-liquid-based polymer monolithic column and its application in the fractionation of proteins from complex biosamples

An ionic-liquid-based polymer monolithic column was synthesized by free radical polymerization within the confines of a stainless-steel column (50 mm × 4.6 mm id). In the processes, ionic liquid and stearyl methacrylate were used as dual monomers, ethylene glycol dimethacrylate as the cross-linking agent, and polyethylene glycol 200 and isopropanol as co-porogens. Effects of the prepolymerization solution components on the properties of the resulting monoliths were studied in detail. Scanning electron microscopy, nitrogen adsorption-desorption measurements, and mercury intrusion porosimetry were used to investigate the morphology and pore size distribution of the prepared monoliths, which showed that the homemade ionic-liquid-based monolith column possessed a relatively uniform macropore structure with a total macropore specific surface area of 44.72 m² /g. Compared to a non-ionic-liquid-based monolith prepared under the same conditions, the ionic-liquid-based monolith exhibited excellent selectivity and high performance for separating proteins from complex biosamples, such as egg white, snailase, bovine serum albumin digest solution, human plasma, etc., indicating promising applications in the fractionation and analysis of proteins from the complex biosamples in proteomics research.

Recent advances in green reagents for molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) are tailor-made materials with special binding sites.

Separation of proteins from complex bio-matrix samples using a double-functionalized polymer monolithic column

A double-functionalized polymer monolithic column was fabricated within the confines of a stainless-steel column (50 mm × 4.6 mm i.d.) via a facile method using iron porphyrin, ionic liquid (1-allyl-3-methylimidazolium chloride) and 1,10-decanediol dimethacrylate as tri-monomers; ethylene dimethacrylate as a crosslinker; polyethylene glycol 400 and N,N-dimethylformamide as co-porogens; benzoyl peroxide and N,N-dimethyl aniline as the redox initiation system. Results obtained from scanning electron microscopy, nitrogen adsorption-desorption, and mercury intrusion porosimetry confirmed the uniform pore structure and the pore size distribution of macro-pores. The home-made monolith was further characterized by elemental analysis to investigate the elemental composition of Fe supplied by iron porphyrin, confirming the synthetic process. The resulting optimized monolithic column was used as the stationary phase in high performance liquid chromatography for separating proteins, such as mixture of standard proteins, egg white, and human plasma, exhibiting good selectivity and high performance. It is worth noting that the home-made double-functionalized polymer monolithic column shows excellent selectivity for fractionation separation of human plasma proteins, and it is a promising separation tool for complex bio-samples in proteomic research.

One-Pot Approach to Prepare Organo-silica Hybrid Capillary Monolithic Column with Intact Mesoporous Silica Nanoparticle as Building Block

A facile "one-pot" approach to prepare organo-silica hybrid capillary monolithic column with intact mesoporous silica nanoparticle (IMSN) as crosslinker and building block was described. An IMSN crosslinked octadecyl-silica hybrid capillary monolithic column (IMSN-C18 monolithic column) was successfully prepared, and the effects of fabrication conditions (e.g. concentration of intact mesoporous silica nanoparticle, polycondensation temperature, content of vinyltrimethoxysilane and stearyl methacrylate) on the structures of the IMSN-C18 monolithic column were studied in detail. The IMSN-C18 hybrid monolithic column possessed uniform morphology, good mechanical and pH stability (pH 1.1-11), which was applied to the separations of alkyl benzenes, polycyclic aromatic hydrocarbons (PAHs), as well as proteins. The minimum plate height of 10.5 μm (corresponding to 95000 N m^-1) for butylbenzene and high reproducibility were achieved. The analysis of tryptic digest of bovine serum albumin (BSA) was carried out on the IMSN-C18 monolithic column by cLC coupled mass spectrometry (cLC-MS/MS), with the protein sequence coverage of 87.5% for BSA, demonstrating its potential application in proteomics.

Recent development of ionic liquid stationary phases for liquid chromatography

Based on their particular physicochemical characteristics, ionic liquids have been widely applied in many fields of analytical chemistry. Many types of ionic liquids were immobilized on a support like silica or monolith as stationary phases for liquid chromatography. Moreover, different approaches were developed to bond covalently ionic liquids onto the supporting materials. The obtained ionic liquid stationary phases show multi-mode mechanism including hydrophobic, hydrophilic, hydrogen bond, anion exchange, π-π, and dipole-dipole interactions. Therefore, they could be used in different chromatographic modes including ion-exchange, RPLC, NPLC and HILIC to separate various classes of compounds. This review mainly summarizes the immobilized patterns and types of ionic liquid stationary phases, their retention mechanisms and applications in the recent five years.

A Novel Poly(ionic liquid) Interface-Free Two-Dimensional Monolithic Material for the Separation of Multiple Types of Glycoproteins

Currently, many types of affinity materials have been developed for the enrichment of glycoproteins potentially considered to be clinical biomarkers; however, they can not effectively distinguish between different glycoproteins and thus lack the functionality that may be the key to the diagnosis of specific diseases. In the present work, a novel interface-free 2D monolithic material has been developed for the separation of multiple types of glycoproteins, in which boronate-functionalized graphene acts as preconcentration segment and poly(guanidinium ionic liquid) acts as separation segment. The resultant 2D material was characterized by X-ray photoelectron spectroscopy, elemental analysis, and electroosmotic flow analysis to demonstrate successful modification at each step. The performance of this 2D material was evaluated by capillary electrochromatography and allowed the successful online concentration and separation of five standard glycoproteins. The high separation efficiency can be largely attributed to the good orthogonality of boronate-functionalized graphene monolith and poly(guanidinium ionic liquid) monolith.

Effect of the ionic liquid group in novel interpenetrating polymer networks on the adsorption properties for oleuropein from aqueous solutions

Combining the advantages of ionic liquids with interpenetrating polymer networks, a novel ionic liquid modified adsorbent (PS/PVIm) was prepared and then used to enrich oleuropein to investigate the interactive forces between the adsorbent and oleuropein.

Facile one-pot preparation of an imidazolium embedded C8 hybrid monolith using polyhedral oligomeric silsesquioxane for capillary liquid chromatography

In this study, a novel imidazolium embedded C₈ hybrid monolithic column based on polyhedral oligomeric silsesquioxane (POSS) was developed.