A newly developed molecularly imprinted polymer on the surface of TiO2 for selective extraction of triazine herbicides residues in maize, water, and soil

A magnetic imprinted polymer nano-adsorbent with embedded quantum dots and mesoporous carbon for the microextraction of triazine herbicides

A magnetic molecularly imprinted polymer (MMIP) adsorbent incorporating amino-functionalized magnetite nanoparticles, nitrogen-doped graphene quantum dots and mesoporous carbon (MIP@MPC@N-GQDs@Fe3O4NH2) was fabricated to extract triazine herbicides from fruit juice. The embedded magnetite nanoparticles simplified the isolation of the adsorbent from the sample solution. The N-GQDs and MPC enhanced adsorption by affinity binding with triazines. The MIP layer provided highly specific recognition sites for the selective adsorption of three target triazines. The extracted triazines were determined by high-performance liquid chromatography (HPLC) coupled with diode-array detection (DAD). The developed method exhibited linearity from 1.5 to 100.0 µg L-1 with a detection limit of 0.5 µg L-1. Recoveries from spiked fruit juice samples were in the range of 80.1- 108.4 %, with a relative standard deviation of less than 6.0 %. The developed MMIP adsorbent demonstrated good selectivity, high extraction efficiency, ease of fabrication and use, and good stability.

Membrane-protected magnetic covalent organic framework for efficient extraction of estrogens in dairy products

The presence of estrogens residues in dairy products is a growing concern due to their potential health risk. Herein, in this study, we have developed a membrane-protected magnetic solid-phase extraction (MP-MSPE) method that utilized a magnetic adsorbent (Fe3O4@COF-LZU1) with in-situ growth for the efficient extraction of estrone (E1), 17β-estradiol (E2), and estriol (E3). When combined with HPLC-FLD, this method allows for the efficient detection of estrogens in dairy products. The stability of the MP-MSPE was improved by the presence of a dialysis membrane, which remained a high extraction efficiency (90 %) even after ten reuse cycles. The hydrogen bonding, π-π interactions and pore size effect contribute to the excellent adsorption of three estrogens onto Fe3O4@COF-LZU1. Under optimal conditions, the method exhibits a low detection limit (0.01-0.15 μg L-1), wide linear range (0.1-800 μg L-1), and favorable recoveries (77.3 %-109.4 %) at three concentration levels (10, 50 and 100 μg L-1). This proposed method is characterized by its simplicity, high efficiency and eco-friendliness, making it a promising approach for extracting estrogens from dairy products.

Unveiling the Latest Developments in Molecularly Imprinted Photocatalysts: A State-of-the-Art Review

Responding to the growing concerns about environmental pollutants, scientists are increasingly turning to innovative solutions rooted in the field of environmental science. One such promising avenue combines the robustness of traditional photocatalysis with the precision of molecular imprinting, leading to the proposition of molecularly imprinted photocatalysts (MIPCs). These MIPCs hold the potential to specifically target and eliminate environmental pollutants, marking them as a promising tool in modern environmental remediation. As researchers delve deeper into this field, the design and optimization of MIPCs have become hotbeds for scientific inquiry. This comprehensive overview delves into the multifaceted approaches to MIPC design, elucidating on aspects like the selection of appropriate photocatalytic bases, the pivotal role of templates, the choice of monomeric building blocks, and the integration of effective cross-linking agents. However, as with all burgeoning technologies, the development of MIPCs is not without its challenges. These potential impediments to the successful innovation and implementation of MIPCs are also explored.

Ionic Liquid Modified Porous Polymer as a Dispersive Filter Extraction Adsorbent for Simple, Sensitive, and Efficient Determination of Chlorotriazine Herbicides in Irrigation Water

Triazine herbicides (TRZHs) are widely used in agricultural production, but their improper use can threaten the environment and organisms. Herein, rapid extraction of four chlorotriazine herbicides (Cl-TRZHs) in irrigation water was achieved using an ionic liquid modified porous m-aminophenol formaldehyde resin (IL-MAPFR) as a dispersive filter extraction (DFE) adsorbent. The IL-MAPFR shows excellent adsorption performance for four Cl-TRZHs (simazine, cyanazine, atrazine, and terbuthylazine), with a large specific surface area (158.1 m² g^-1) and fast mass transfer (2 min). The adsorption process conforms to the pseudo-second-order kinetics and Freundlich isotherm models. The four Cl-TRZHs were concentrated 12-16-fold after the IL-MAPFR-DFE method. Coupled with high-performance liquid chromatography, an accurate and sensitive determination method for four Cl-TRZHs in irrigation water was established, with low detection limit (0.11-0.20 ng mL^-1), high recoveries (91.5-110%), and excellent precision (relative standard deviations (RSDs) ≤ 8.4%). This method provides technical support for agricultural irrigation water quality monitoring and has great application potential in water safety, especially pesticide residues.

[Advances in application of molecularly imprinted polymers to the detection of polar pesticide residues]

Polar pesticides can be primarily classified as fungicides, herbicides, and insecticides; their rich variety and low cost have led to their extensive utilization in agriculture. However, the overuse of polar pesticides can lead to environmental contamination, such as water or soil pollution, which can also increase the risk of pesticide exposure among human life directly, or indirectly through contact with animal and plant-derived food. There are considerable differences in the physical and chemical properties of polar pesticides, as well as their trace amounts in complex food and environmental samples, posing immense challenges to their accurate detection. As a kind of artificially prepared selective adsorbent, molecularly imprinted polymers (MIPs) possess specific recognition sites complementary to template molecules in terms of the spatial structure, size, and chemical functional groups. With many advantages such as easy preparation, low cost, as well as good chemical and mechanical stability, MIPs have been widely applied in sample pretreatment and the analysis of polar pesticide residues. MIPs are typically used as adsorption materials in solid phase extraction (SPE) methods, including magnetic solid phase extraction (MSPE), dispersed solid phase extraction (DSPE), and stir bar sorptive extraction (SBSE). To rapidly detect polar pesticide residues with high sensitivity, MIPs are also used in the preparation of fluorescent sensors and electrochemical sensors. Furthermore, MIPs can be employed as the substrate in surface-enhanced Raman spectroscopy and as the substrate for the ion source in mass spectrometry for polar pesticide residue analysis. Thus far, various molecularly imprinted materials have been reported for the efficient separation and analysis of polar pesticide residues in various complex matrices. However, there is no review that summarizes the recent advances in MIPs for the determination of polar pesticides. This review introduces imprinting strategies and polymerization methods for MIPs, and briefly summarizes some new molecular imprinting strategies and preparation technologies. The application of MIPs in recent years (particularly the last five years) to the detection of polar pesticide residues including neonicotinoids, organophosphorus, triazines, azoles, and urea is then systematically summarized. Finally, the future development direction and trends for MIPs are proposed considering existing challenges, with the aim of providing reference to guide future research on MIPs in the field of polar pesticide residue detection.

Recent advances in the extraction of triazine herbicides from water samples

Pesticides are excessively used in agriculture to improve the quality of crops by eliminating the negative effects of pests. Among the different groups of pesticides, triazine pesticides are a group of compounds that contain a substituted C₃ H₃ N₃ heterocyclic ring, and they are widely used. Triazine pesticides can be dangerous for humans as well as for the aquatic environment because of their high toxicity and endocrine disrupting effect. However, the concentration of these chemical compounds in water samples is low. Moreover, other compounds that may exist in the water samples can interfere with the determination of triazine pesticides. As a result, it is important to develop sample preparation methods that provide preconcentration of the target analyte and sufficient clean-up of the samples. Recently, a wide variety of novel microextraction and miniaturized extraction techniques (e.g., solid-phase microextraction and liquid-phase microextraction, stir bar sorptive extraction, fabric phase sorptive extraction, dispersive solid-phase extraction, and magnetic solid-phase extraction) have been developed. In this review, we aim to discuss the recent advances regarding the extraction of triazine pesticides from environmental water samples. Emphasis will be given to novel sample preparation methods and novel sorbents developed for sorbent-based extraction techniques.

Application of an in-situ formulated magnetic deep eutectic solvent for the determination of triazine herbicides in rice

In this work, a rapid, convenient, sensitive, and cost-effective in-situ formed magnetic deep eutectic solvent based on a dispersive liquid-liquid extraction method was developed for the determination of triazine herbicides in rice. A novel tetrabutylammonium chloride (TBAC) based magnetic deep eutectic solvent (MDES), [TBAC/ethylene glycol][FeCl₄] was generated by means of an simple in-situ reaction of the deep eutectic solvent (DES) with iron chloride in the sample solution. The solvent which has high affinity for target analytes and magnetic ability was successfully employed as an extraction solvent and simplified both the extraction and separation procedure. A series of parameters influencing the extraction efficiency were investigated. Under optimal conditions, calibration curves for the target triazine herbicides were obtained in the ranges of 5-1000 ng g^-1, with correlation coefficients greater than 0.9910. The limits of detection (LOD) and quantification (LOQ) were in the range of 1.49-3.10 ng g^-1 and 4.96-10.34 ng g^-1, respectively. The precision of intra- and inter-day were under 6.2% and 9.6%, respectively, and the precision between laboratories were lower than 7.5%. The accuracy of the method varied from 84.9 to 117.5%. Furthermore, the method showed satisfactory matrix effect and robustness. These results indicate that the technique is suitable for rice sample analysis.

Recent advances and applications of molecularly imprinted polymers in solid-phase extraction for real sample analysis

Sample pretreatment is essential for the analysis of complicated real samples due to their complex matrices and low analyte concentrations. Among all sample pretreatment methods, solid-phase extraction is arguably the most frequently used one. However, the majority of available solid-phase extraction adsorbents suffer from limited selectivity. Molecularly imprinted polymers are a type of tailor-made artificial antibodies and receptors with specific recognition sites for target molecules. Using molecularly imprinted polymers instead of conventional adsorbents can greatly improve the selectivity of solid-phase extraction, and therefore molecularly imprinted polymer-based solid-phase extraction has been widely applied to separation, clean up and/or preconcentration of target analytes in various kinds of real samples. In this article, after a brief introduction, the recent developments and applications of molecularly imprinted polymer-based solid-phase extraction for determination of different analytes in complicated real samples during the 2015-2020 are reviewed systematically, including the solid-phase extraction modes, molecularly imprinted adsorbent types and their preparations, and the practical applications of solid-phase extraction to various real samples (environmental, food, biological, and pharmaceutical samples). Finally, the challenges and opportunities of using molecularly imprinted polymer-based solid-phase extraction for real sample analysis are discussed.

Application of surface-imprinted polymers supported by hydroxyapatite in the extraction of zearalenone in various cereals

Surface-imprinted polymers supported by hydroxyapatite (HAP@MIPs) were prepared using coumarin-3-carboxylic acid and naringenin as dummy template molecules of zearalenone (ZEA). HAP@MIPs were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, particle size distribution analysis, energy-dispersive X-ray spectroscopy, and X-ray diffraction. The adsorption performance was studied. The results showed that it could reach the adsorption equilibrium within 6 min. The adsorption amount could reach 6.77 μg mg^-1, while the concentration was 20 μg mL^-1. The self-made solid-phase extraction (SPE) columns were prepared with HAP@MIPs as sorbents for the separation and purification of ZEA in cereal samples. The method was established by high-performance liquid chromatography (HPLC). The recoveries were in the range of 70.09-101.88%; the relative standard deviation was 2.06-8.47%. Finally, millet, coix lachryma, and corn were placed under extreme conditions to produce ZEA. The method was used to extract and analyze ZEA in the above samples. The results showed that self-made SPE columns with HPLC could be used for the separation and enrichment of ZEA in real samples. Graphical abstract.

Dual-template imprinted polymers for class-selective solid-phase extraction of seventeen triazine herbicides and metabolites in agro-products

A novel dual-template molecularly imprinted polymer (DMIP) was prepared with atrazine and prometryn as the template and applied as a class-specific adsorbent for simultaneously selective solid-phase extraction of seventeen triazine herbicides and metabolites from complex matrices. For comparison, a non-imprinted polymer (NIP) and two single-template imprinted polymers (SMIPs) were also synthesized using the same procedure of DMIP, but in the absence of the template (NIP) or with one template (SMIP). Various parameters affecting the extraction performance of DMIP-SPE were investigated in detail. Under the optimum conditions, the enrichment efficiency, class-selectivity and reusability of DMIP-SPE were evaluated. Only DMIP-SPE possessed high affinity and good selective recognition ability for all the seventeen targets including chloro-, thiomethyl- and methoxy- triazines. Further, a DMIP-SPE-LC-MS/MS method was developed for simultaneously determining trace triazine herbicides and metabolites in maize, wheat and cottonseed samples. The method showed good linearity (r>0.9941) in the range of 10-200 μg kg^-1, high sensitivity with low limits of detection of 0.5-8.8 μg kg^-1, and satisfactory recoveries of 61.3-105.9% with relative standard deviations of 2.1-10.7%. These results highlighted the good application prospect of the multi/dual-template imprinting strategy in the high-throughput analysis of various concerned contaminants in agro-products.

Organic Analysis of Environmental Samples Using Liquid Chromatography with Diode Array and Fluorescence Detectors: An Overview

This overview is focused to provide an useful guide of the families of organic pollutants that can be determined by liquid chromatography operating in reverse phase and ultraviolet/fluorescence detection. Eight families have been classified as the main groups to be considered: carbonyls, carboxyls, aromatics, phenols, phthalates, isocyanates, pesticides and emerging. The references have been selected based on analytical methods used in the environmental field, including both the well-established procedures and those more recently developed.

Photocatalytic Degradation of Profenofos and Triazophos Residues in the Chinese Cabbage, Brassica chinensis, Using Ce-Doped TiO2

Pesticides have revolutionized the modern day of agriculture and substantially reduced crop losses. Synthetic pesticides pose a potential risk to the ecosystem and to the non-target organisms due to their persistency and bioaccumulation in the environment. In recent years, a light-mediated advanced oxidation processes (AOPs) has been adopted to resolve pesticide residue issues in the field. Among the current available semiconductors, titanium dioxide (TiO2) is one of the most promising photocatalysts. In this study, we investigated the photocatalytic degradation of profenofos and triazophos residues in Chinese cabbage, Brassica chinensis, using a Cerium-doped nano semiconductor TiO2 (TiO2/Ce) under the field conditions. The results showed that the degradation efficiency of these organophosphate pesticides in B. chinensis was significantly enhanced in the presence of TiO2/Ce. Specifically, the reactive oxygen species (ROS) contents were significantly increased in B. chinensis with TiO2/Ce treatment, accelerating the degradation of profenofos and triazophos. Ultra-performance liquid chromatography–mass spectroscopy (UPLC-MS) analysis detected 4-bromo-2-chlorophenol and 1-phenyl-3-hydroxy-1,2,4-triazole, the major photodegradation byproducts of profenofos and triazophos, respectively. To better understand the relationship between photodegradation and the molecular structure of these organophosphate pesticides, we investigated the spatial configuration, the bond length and Mulliken atomic charge using quantum chemistry. Ab initio analysis suggests that the bonds connected by P atom of profenofos/triazophos are the initiation cleavage site for photocatalytic degradation in B. chinensis.

Synthesis and Applications of Molecularly Imprinted Polymers Modified TiO₂ Nanomaterials: A Review

Titanium dioxide (TiO₂) nanomaterials have caused a widespread concern in the past several decades for their bulk characteristics and potential applications in many different areas. Lately, the combination between molecularly imprinted polymers (MIPs) and TiO₂ nanomaterials have been proven to improve the relative adsorption capacity, selectivity and accelerate the rate of mass transfer of analyte which is not possible using TiO₂ alone. Considering the unique performance of the MIPs modified TiO₂ nanomaterials, this review intends to give an overview of the recent progresses in the development of MIPs modified TiO₂ nanomaterials, the potential applications of their tailor-made characteristics. The limitations and challenges in this practically promising nanomaterials have also been raised and summarized. By means of the points raised in this article, we would like to provide some assistance for further development of preparation methodologies and the expansion of some potential applications in the field of MIPs modified TiO₂ nanomaterials.

An ionic liquid-magnetic graphene composite for magnet dispersive solid-phase extraction of triazine herbicides in surface water followed by high performance liquid chromatography

A new ionic liquid-magnetic graphene (IL-MG) composite was used as the adsorbent in magnetic dispersive solid-phase extraction to rapidly extract and isolate triazine herbicides from surface water. IL-MG was synthesized by a simple and time-saving one-pot strategy where the synthesis of magnetic Fe₃O₄, the modification with an IL, and the reduction of graphene oxide to graphene were conducted at the same time. An IL was applied to enrich the interaction mechanism between IL-MG and analytes (π-π, hydrophobic interaction, and electrostatic interaction). Moreover, the IL and Fe₃O₄ nanoparticles acted as spacers, inserting between the layers of graphene to prevent the aggregation of graphene, which improved the adsorption ability because of the large specific surface area of IL-MG. The resultant IL-MG had hierarchical flake structures and showed a high adsorption capacity (8266.0-12 324.1 μg g^-1) toward triazine herbicides. Under suitable conditions, the linearity for triazine herbicides was achieved in the range of 0.55-500 ng mL^-1 with a detection limit of 0.09-0.15 ng mL^-1 and a quantitation limit of 0.31-0.51 ng mL^-1, and the enrichment factor was 83-fold, which indicated that the proposed method could be successfully applied for the determination of triazine herbicides in surface water.

Activity, biomass and composition of microbial communities and their degradation pathways in exposed propazine soil

Propazine is a s-triazine herbicide widely used for controlling weeds for crop production. Its persistence and contamination in environment nagatively affect crop growth and food safety. Elimination of propazine residues in the environment is critical for safe crop production. This study identified a microbial community able to degrade propazine in a farmland soil. About 94% of the applied propazine was degraded within 11 days of incubation when soil was treated with 10mgkg^-1 propazine as the initial concentration. The process was accompanied by increased microbial biomass and activities of soil enzymes. Denaturing gradient gel electrophoresis (DGGE) revealed multiple bacterial strains in the community as well as dynamic change of the composition of microbial community with a reduced microbial diversity (H' from 3.325 to 2.78). Tracking the transcript level of degradative genes AtzB, AtzC and TrzN showed that these genes were induced by propazine and played important roles in the degradation process. The activities of catalase, dehydrogenase and phenol oxidase were stimulated by propazine exposure. Five degradation products (hydroxyl-, methylated-, dimeric-propazine, ammeline and ammelide) were characterized by UPLC-MS², revealing a biodegradation of propazine in soil. Several novel methylated and dimeric products of propazine were characterized in thepropazine-exposed soil. These data help understand the pathway, detailed mechanism and efficiency of propazine biodegradation in soil under realistic field condition.

Newest applications of molecularly imprinted polymers for extraction of contaminants from environmental and food matrices: A review

This paper presents an overview of the recent applications of molecularly imprinted polymers (MIPs) to sample preparation. The review is thought to cover analytical procedures for extraction of contaminants (mainly illegal/noxious organic compounds) from food and environmental matrices, with a particular focus on the various pre-concentration/cleanup techniques, that is offline and online solid-phase extraction (SPE), dispersive SPE (d-SPE), magnetic SPE (MSPE), solid-phase microextraction (SPME) and stir-bar sorptive extraction (SBSE), applied before instrumental quantification. The selectivity and extraction efficiency of MIP-based sorbent phases are critically discussed, also in relation to the physical-chemical properties resulting from the synthetic procedures. A variety of molecularly imprinted sorbents is presented, including hybrid composites embedding carbon nanomaterials and ionic liquids. The analytical performance of MIP materials in sample preparation is commented as function of the complexity of the matrix, and it is compared to that exhibited by (commercial) aspecific and/or immunosorbent phases.

Molecularly imprinted polymers as selective adsorbents for ambient plasma mass spectrometry

The application of molecularly imprinted polymers (MIPs) as molecular scavengers for ambient plasma ionization mass spectrometry has been reported for the first time. MIPs were synthesized using methacrylic acid as functional monomer; nicotine, propyphenazone, or methylparaben as templates; ethylene glycol dimethacrylate as a cross-linker; and 2,2′-azobisisobutyronitrile as polymerization initiator. To perform ambient plasma ionization experiments, a setup consisting of the heated crucible, a flowing atmospheric-pressure afterglow (FAPA) plasma ion source, and a quadrupole ion trap mass spectrometer has been used. The heated crucible with programmable temperature allows for desorption of the analytes from MIPs structure which results in their direct introduction into the ion stream. Limits of detection, linearity of the proposed analytical procedure, and selectivities have been determined for three analytes: nicotine, propyphenazone, and methylparaben. The analytes used were chosen from various classes of organic compounds to show the feasibility of the analytical procedure. The limits of detections (LODs) were 10 nM, 10, and 0.5 μM for nicotine, propyphenazone, and methylparaben, respectively. In comparison with the measurements performed for the non-imprinted polymers, the values of LODs were improved for at least one order of magnitude due to preconcentration of the sample and reduction of background noise, contributing to signal suppression. The described procedure has shown linearity in a broad range of concentrations. The overall time of single analysis is short and requires ca. 5 min. The developed technique was applied for the determination of nicotine, propyphenazone, and methylparaben in spiked real-life samples, with recovery of 94.6–98.4%. The proposed method is rapid, sensitive, and accurate which provides a new option for the detection of small organic compounds in various samples.

Graphical abstract

Removal of triazine-based herbicides on specific polymeric sorbent: batch studies

The triazine-based herbicides removal from aqueous solution on specific polymeric adsorbent was studied. Poly(divinylbenzene) modified with maleic anhydride in Diels-Alder reaction was selected for the sorption experiments because molecular structures of triazine derived herbicides exhibit complementarity to the arrangement of functional groups in the polymer. The presence of carboxyl groups in adsorbent structure resulted in specific directional interactions, such as hydrogen bonds, which can intensify adsorption ability towards triazines. In the case of both atrazine and terbuthylazine the effect is more intensive, whereas in sorption of simazine and propazine the non-specific interactions have higher importance than hydrogen bonds. Specific interactions in investigated systems are between the hydrogen atom of the amino group of triazine and the carbonyl oxygen atom of the carboxyl group of the modified poly(divinylbenzene) (O…H–N). Only in the case of terbuthylazine the creation of hydrogen bonds between hydroxyl hydrogen atom of carboxylic group and nitrogen atom containing free electron pair from triazine (O–H…N) was observed. The sorption of simazine, atrazine and propazine does not depend on pH in the acidic region, whereas in the case of terbuthylazine an increase in sorption efficiency is observed while pH decreases.