Novel imidazolium-embedded N,N-dimethylaminopropyl-functionalized silica-based stationary phase for hydrophilic interaction/reversed-phase mixed-mode chromatography

Assessment of Hydrophilicity/Hydrophobicity in Mesoporous Silica by Combining Adsorption, Liquid Intrusion, and Solid-State NMR Spectroscopy

We have developed a comprehensive strategy for quantitatively assessing the hydrophilicity/hydrophobicity of nanoporous materials by combining advanced adsorption studies, novel liquid intrusion techniques, and solid-state NMR spectroscopy. For this, we have chosen a well-defined system of model materials, i.e., the highly ordered mesoporous silica molecular sieve SBA-15 in its pristine state and functionalized with different amounts of trimethylsilyl (TMS) groups, allowing one to accurately tailor the surface chemistry while maintaining the well-defined pore structure. For an absolute quantification of the trimethylsilyl group density, quantitative 1H solid-state NMR spectroscopy under magic angle spinning was employed. A full textural characterization of the materials was obtained by high-resolution argon 87 K adsorption, coupled with the application of dedicated methods based on nonlocal-density functional theory (NLDFT). Based on the known texture of the model materials, we developed a novel methodology allowing one to determine the effective contact angle of water adsorbed on the pore surfaces from complete wetting to nonwetting, constituting a powerful parameter for the characterization of the surface chemistry inside porous materials. The surface chemistry was found to vary from hydrophilic to hydrophobic as the TMS functionalization content was increased. For wetting and partially wetting surfaces, pore condensation of water is observed at pressures P smaller than the bulk saturation pressure p0 (i.e., at p/p0 < 1) and the effective contact angle of water on the pore walls could be derived from the water sorption isotherms. However, for nonwetting surfaces, pore condensation occurs at pressures above the saturation pressure (i.e., at p/p0 > 1). In this case, we investigated the pore filling of water (i.e., the vapor-liquid phase transition) by the application of a novel, liquid water intrusion/extrusion methodology, allowing one to derive the effective contact angle of water on the pore walls even in the case of nonwetting. Complementary molecular simulations provide density profiles of water on pristine and TMS-grafted silica surfaces (mimicking the tailored, functionalized experimental silica surfaces), which allow for a molecular view on the water adsorbate structure. Summarizing, we present a comprehensive and reliable methodology for quantitatively assessing the hydrophilicity/hydrophobicity of siliceous nanoporous materials, which has the potential to optimize applications in heterogeneous catalysis and separation (e.g., chromatography).

Preparation and application of PGMA-DVB microspheres via surface-modification with quaternary and phenylboronic acid moiety

Porous cross-linked poly (glycidyl methacrylate-divinylbenzene) (PGMA-DVB) particles (7.42 ± 0.24 μm in diameter) were prepared by an improved two-step seed swelling polymerization method. The PGMA-DVB particles were further modified with poly (allylamine hydrochloride) (PAH) and 4-(bromomethyl) phenylboronic acid (BPA), which were used as high performance liquid chromatography (HPLC) filler for nucleotides separation. The liquid chromatographic column packing materials successfully achieved complete separation of nucleotides mixture or deoxynucleotides mixture based on non-polar adsorption, hydrogen bonding interaction and electrostatic adsorption. Reckoning on the chemical structure of BPA, nucleotides and deoxynucleotides with same base group were also separated. The column packing materials were durable after over 100 time running or 7 days. It presents a kind of new notion for the separation of nucleotides by HPLC.

A new strategy for the preparation of mixed-mode chromatographic stationary phases based on modified dialdehyde cellulose

A new strategy for the preparation of mixed-mode chromatographic stationary phases based on modified dialdehyde cellulose was proposed. Two novel mixed-mode chromatographic stationary phases, dicarboxyl cellulose-modified silica (DCC/SiO₂) and (S)-α-phenylethylamine-bonded DCC/SiO₂ ((S)-α-PEA/DCC/SiO₂), were prepared by utilizing the easy functionalization characteristics of dialdehyde cellulose. The chromatographic evaluation showed that DCC/SiO₂ column could be used in hydrophilic interaction liquid chromatography (HILIC) and ion exchange chromatography (IEC) modes, (S)-α-PEA/DCC/SiO₂ column could be used in HILIC, IEC and chiral separation modes. The DCC/SiO₂ column and (S)-α-PEA/DCC/SiO₂ column exhibited excellent chromatographic performance by separating strongly polar compounds, phenylamines and chiral compounds in the above separation modes. The preparation method of modified dialdehyde cellulose-based mixed-mode chromatographic stationary phases was simple, and also provided a new idea for the development of the subsequent novel mixed-mode chromatographic stationary phases.

Fundamental Properties of Packing Materials for Liquid Chromatography

The high performance of chemically-modified silica gel packing materials is based on the utilization of pure silica gels. Earlier silica gels used to be made from inorganic silica; however, nowadays, silica gels are made from organic silanes. The surface smoothness and lack of trace metals of new silica gels permits easy surface modifications (chemical reactions) and improves the reproducibility and stability. Sharpening peak symmetry is based on developing better surface modification methods (silylation). Typical examples can be found in the chromatography of amitriptyline for silanol testing and that of quinizarin for trace metal testing. These test compounds were selected and demonstrated sensitive results in the measurement of trace amounts of either silanol or trace metals. Here, we demonstrate the three-dimensional model chemical structures of bonded-phase silica gels with surface electron density for easy understanding of the molecular interaction sites with analytes. Furthermore, a quantitative explanation of hydrophilic and hydrophobic liquid chromatographies was provided. The synthesis methods of superficially porous silica gels and their modified products were introduced.

Synthesis, characterization, and application of a novel multifunctional stationary phase for hydrophilic interaction/reversed phase mixed-mode chromatography

A novel multifunctional stationary phase based on silica gel was synthesised starting from L- isoleucine and 4-phenylbutylamine and evaluated as a hydrophilic interaction/reversed-phase mixed-mode stationary phase for high-performance liquid chromatography (HPLC). The prepared stationary phase was characterized by elemental analysis, infrared spectroscopy (IR), scanning electron microscopy (SEM), Brunauer, Emmett and Teller (BET) and solid-state ¹³C nuclear magnetic resonance (NMR). The mechanisms involved in the chromatographic separation are multi-interaction, including hydrophobic, π-π, hydrogen-bonding, dipole-dipole and ion-dipole interactions. Based on these interactions, successful separation could be achieved among several aromatic compounds having different polarities under both hydrophilic interaction liquid chromatography (HILIC) and reversed phase (RP) condition. Nucleotides/nucleosides were separated in the HILIC mode. The effects of different separation conditions, such as pH value, mobile-phase content, column temperature, buffer concentration and flow rate, on the separation of nucleotides/nucleosides in HILIC mode were investigated. The seven nucleotides/nucleosides were separated within 22min, while six of them were separated within 10min by isocratic elution. To determine the influence of the new multifunctional stationary phase under the RP condition, a number of moderately and weakly polar and nonpolar compounds, such as 10 substituted anilines and eight substituted phenols were separated successfully under the RP condition within 14 and 15min, respectively. Additionally, nine mixtures of polar/nonpolar test compounds were simultaneously separated within 19min, while seven of them were separated within 12min, under HILIC/RP mixed-mode conditions. Chromatographic parameters, such as the retention factor and peak asymmetry factor, were calculated for all of the analytes, while the theoretical plate number was calculated for analytes separated by isocratic elution. Compared to traditional C18 and commercial HILIC columns, the new stationary phase exhibited both HILIC and RPLC performance, and the scope of analyte separation was thus enlarged.

Preparation of a silica stationary phase co-functionalized with Wulff-type phenylboronate and C12 for mixed-mode liquid chromatography

A silica stationary phase was designed and synthesized through the co-functionalization of silica with Wulff-type phenylboronate and C12 for mixed-mode liquid chromatography applications. The as-synthesized stationary phase was characterized by elemental analysis and Fourier Transform-InfraRed Spectroscopy (FT-IR). Retention mechanisms, including boronate affinity (BA), reversed-phase (RP) and anion-exchange (AE), were involved. Retention mechanism switching was easily realized by adjustment of the mobile phase constitution. Cis-diol compounds could be selectively captured under neutral conditions in BA mode and off-line separated in RP mode. Neutral, basic, acidic and amphiprotic compounds were chromatographed on the column in RP chromatography, while inorganic anions were chromatographed in AE chromatography to characterize the mixed-mode nature of the prepared stationary phase. In addition, the RP performance was compared with an octadecyl silica column in terms of column efficiency (N/m), asymmetry factor (A_f), retention factor (k) and resolution (Rs). The prepared stationary phase offered multiple interactions with analytes in addition to hydrophobic interactions under RP elution conditions. Based on the mixed-mode properties, off-line 2D-LC, for selective capture and separation of urinary nucleosides, was successfully realized on a single column, demonstrating its powerful application potential for complex samples.

Cationic Ionic Liquids Organic Ligands Based Metal-Organic Frameworks for Fabrication of Core-Shell Microspheres for Hydrophilic Interaction Liquid Chromatography

In this study, new metal-organic frameworks (MOFs) nanocrystals modified SiO2 core-shell microspheres were designed with cationic ionic liquids (ILs) 1,3-bis(4-carboxybutyl)imidazolium bromide (ILI) as organic ligands. By further adjustment the growth cycles, the new ILI-01@SiO2 core-shell stationary phase was facilely fabricated. The developed stationary phase was respectively characterized via element analysis, thermogravimetric analysis, scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectrometry. Because the introduction of cationic imidazolium-based ILs ILI for fabrication of the MOFs nanocrystals shell, the new stationary phase exhibits the retention mechanism of hydrophilic interaction liquid chromatography (HILIC). Many polar samples, such as amides, vitamins, nucleic acid bases, and nucleosides, were utilized to investigate the performance of the prepared ILI-01@SiO2 column. Compared to the conventional aminosilica column, the new ILI-01@SiO2 column displays high separation selectivity in a shorter separation time. Furthermore, the new ILI-01@SiO2 column was also used for detection of illegal melamine addition in the baby formula. All the above results demonstrate the new ILI-01@SiO2 core-shell stationary phase is of good potentials for high-selectivity separation the polar samples.

Recent development in liquid chromatography stationary phases for separation of Traditional Chinese Medicine components

Traditional Chinese Medicine (TCM) is an ancient medical practice which has been used to prevent and cure diseases for thousands of years. TCMs are frequently multi-component systems with mainly unidentified constituents. The study of the chemical compositions of TCMs remains a hotspot of research. Different strategies have been developed to manage the significant complexity of TCMs, in an attempt to determine their constituents. Reversed-phase liquid chromatography (RPLC) is still the method of choice for the separation of TCMs, but has many problems related to limited selectivity. Recently, enormous efforts have been concentrated on the development of efficient liquid chromatography (LC) methods for TCMs, based on selective stationary phases. This can improve the resolution and peak capacity considerably. In addition, high-efficiency stationary phases have been applied in the analysis of TCMs since the invention of ultra high-performance liquid chromatography (UHPLC). This review describes the advances in LC methods in TCM research from 2010 to date, and focuses on novel stationary phases. Their potential in the separation of TCMs using relevant applications is also demonstrated.