Short-chained oligo(ethylene oxide)-functionalized gold nanoparticles: realization of significant protein resistance

Enhanced triolein and ethyl ferulate interesterification performance by CRL-AuNPs

This study established a Candida rugosa lipase (CRL) system to catalyze triolein and ethyl ferulate interesterification. The products were identified, and the binding mode between the substrates and CRL was predicted through molecular docking. Three methods for preparing CRL-AuNPs were proposed and characterized. It was found that the addition of 40 mL of 15 nm gold nanoparticles increased the CRL activity from 3.05 U/mg to 4.75 U/mg, but the hybridization efficiency was only 32.7 %. By using 4 mL of 0.1 mg/mL chloroauric acid, the hybridization efficiency was improved to 50.7 %, but the enzyme activity was sharply decreased. However, when the molar ratio of Mb to HAuCl4 was 0.2, the hybridization efficiency increased to 71.8 %, and the CRL activity was also enhanced to 5.98 U/mg. Under optimal conditions, the enzyme activity of CRL-AuNPs③ was maintained at 95 % after 6 repetitions and 85.6 % after 30 days at room temperature.

Modular Fabrication of Bioorthogonal Nanozymes for Biomedical Applications

The incorporation of transition metal catalysts (TMCs) into nanoscaffolds generates nanocatalysts that replicate key aspects of enzymatic behavior. The TMCs can access bioorthogonal chemistry unavailable to living systems. These bioorthogonal nanozymes can be employed as in situ "factories" for generating bioactive molecules where needed. The generation of effective bioorthogonal nanozymes requires co-engineering of the TMC and the nanometric scaffold. This review presents an overview of recent advances in the field of bioorthogonal nanozymes, focusing on modular design aspects of both nanomaterial and catalyst and how they synergistically work together for in situ uncaging of imaging and therapeutic agents.

Shape-Induced Variations in Aromatic Thiols Adsorption on Gold Nanoparticle: A Novel Method for Accurate Evaluation of Adsorbed Molecules

Nonspherical gold nanoparticles (GNPs) are increasingly used to enhance sensitivity and selectivity in analytical methods such as surface-enhanced Raman spectroscopy (SERS) for detecting trace biomarkers. However, there is limited research on the adsorption properties of aromatic thiols onto gold nanoparticles of different morphologies, where surface curvature varies significantly at the molecular level. In this study, we investigated the adsorption kinetics of 4-mercaptobenzoic acid, an aromatic molecule, on GNPs with different shapes using SERS. Our findings revealed significant differences in the adsorption behavior and binding site preferences of aromatic thiols on GNPs with distinct morphologies. While thiol molecules consider any surface site on nanospheres equally appealing, nanostars exhibit variations in curvature and surface energy, leading to initial binding with further repositioning from the tips of the nanostar after plasmon activation. To address these differences, we proposed a universal method to evaluate the quantity of tightly bound adsorbed molecules on GNPs independently of the particle size, shape, or concentration.

Study of molecular interactions by nonequilibrium capillary electrophoresis of equilibrium mixtures: Originations, developments, and applications

Molecular interactions play a vital role in regulating various physiological and biochemical processes in vivo. Kinetic capillary electrophoresis (KCE) is an analytical platform that offers significant advantages in studying the thermodynamic and kinetic parameters of molecular interactions. It enables the simultaneous analysis of these parameters within an interaction pattern and facilitates the screening of binding ligands with predetermined kinetic parameters. Nonequilibrium capillary electrophoresis of equilibrium mixtures (NECEEM) was the first proposed KCE method, and it has found widespread use in studying molecular interactions involving proteins/aptamers, proteins/small molecules, and peptides/small molecules. The successful applications of NECEEM have demonstrated its promising potential for further development and broader application. However, there has been a dearth of recent reviews on NECEEM. To address this gap, our study provides a comprehensive description of NECEEM, encompassing its origins, development, and applications from 2015 to 2022. The primary focus of the applications section is on aptamer selection and screening of small-molecule ligands. Furthermore, we discuss important considerations in NECEEM experimental design, such as buffer suitability, detector selection, and protein adsorption. By offering this thorough review, we aim to contribute to the understanding, advancement, and wider utilization of NECEEM as a valuable tool for studying molecular interactions and facilitating the identification of potential ligands and targets.

Silver nanoparticle interactions with glycated and non-glycated human serum albumin mediate toxicity

Introduction: Biomolecules bind to and transform nanoparticles, mediating their fate in biological systems. Despite over a decade of research into the protein corona, the role of protein modifications in mediating their interaction with nanomaterials remains poorly understood. In this study, we evaluated how glycation of the most abundant blood protein, human serum albumin (HSA), influences the formation of the protein corona on 40 nm silver nanoparticles (AgNPs) and the toxicity of AgNPs to the HepG2 human liver cell line. Methods: The effects of glycation on AgNP-HSA interactions were quantified using circular dichroism spectroscopy to monitor protein structural changes, dynamic light scattering to assess AgNP colloidal stability, zeta potential measurements to measure AgNP surface charge, and UV-vis spectroscopy and capillary electrophoresis (CE) to evaluate protein binding affinity and kinetics. The effect of the protein corona and HSA glycation on the toxicity of AgNPs to HepG2 cells was measured using the WST cell viability assay and AgNP dissolution was measured using linear sweep stripping voltammetry. Results and Discussion: Results from UV-vis and CE analyses suggest that glycation of HSA had little impact on the formation of the AgNP protein corona with protein-AgNP association constants of ≈2x10⁷ M^-1 for both HSA and glycated HSA (gHSA). The formation of the protein corona itself (regardless of whether it was formed from HSA or glycated HSA) caused an approximate 2-fold decrease in cell viability compared to the no protein AgNP control. While the toxicity of AgNPs to cells is often attributed to dissolved Ag(I), dissolution studies showed that the protein coated AgNPs underwent less dissolution than the no protein control, suggesting that the protein corona facilitated a nanoparticle-specific mechanism of toxicity. Overall, this study highlights the importance of protein coronas in mediating AgNP interactions with HepG2 cells and the need for future work to discern how protein coronas and protein modifications (like glycation) may alter AgNP reactivity to cellular organisms.

Surface engineering strategies of gold nanomaterials and their applications in biomedicine and detection

Gold nanomaterials have potential applications in biosensors and biomedicine due to their controllable synthesis steps, high biocompatibility, low toxicity and easy surface modification. However, there are still various limitations including low water solubility and stability, which greatly affect their applications. In addition, some synthetic methods are very complicated and costly. Therefore, huge efforts have been made to improve their properties. This review mainly introduces the strategies for surface modification of gold nanomaterials, such as amines, biological small molecules and organic small molecules as well as the biological applications of these functionalized AuNPs. We aim to provide effective ideas for better functionalization of gold nanomaterials in the future.

Engineering the Interface between Inorganic Nanoparticles and Biological Systems through Ligand Design

Nanoparticles (NPs) provide multipurpose platforms for a wide range of biological applications. These applications are enabled through molecular design of surface coverages, modulating NP interactions with biosystems. In this review, we highlight approaches to functionalize nanoparticles with "small" organic ligands (Mw < 1000), providing insight into how organic synthesis can be used to engineer NPs for nanobiology and nanomedicine.

Contributions of Capillary Electrophoresis in Analytical Nanometrology: A Critical View

An overview on the increasing role of capillary electrophoresis in characterization and direct analysis of nanomaterials is herein presented. The niche of electrophoretic approaches in nanometrology is so relevant that nonmetallic, metal, metal oxide nanoparticles, and quantum dots have been analyzed to be targeted via capillary electrophoresis with conventional detection systems or coupling arrangements aimed at increasing selectivity and sensitivity toward either pristine or conjugated nanoparticles. Moreover, parameters altering intrinsic properties of nanoparticles may be optimized to gather the desired results and identify nanomaterials according to their size, shape, or associations with binding agents. The usefulness and quickness of capillary electrophoresis for quantifying or screening ultrasmall-sized particles enables this technique to set an example for analysis of standards or previously synthesized nanostructures in research or routine laboratories. Abundant evidence of the suitability of electrophoretic approaches for characterization and direct determination of nanomaterials in actual samples has been provided in this review, together with a discussion about hyphenation with state-of-the art detectors and comparison between capillary electrophoresis with other separation approaches. This permits scientific community to be optimistic in the short term.

Surface Modification of Spider Silk Particles to Direct Biomolecular Corona Formation

In recent years, spider silk-based materials have attracted attention because of their biocompatibility, processability, and biodegradability. For their potential use in biomaterial applications, i.e., as drug delivery systems and implant coatings for tissue regeneration, it is vital to understand the interactions between the silk biomaterial surface and the biological environment. Like most polymeric carrier systems, spider silk material surfaces can adsorb proteins when in contact with blood, resulting in the formation of a biomolecular corona. Here, we assessed the effect of surface net charge of materials made of recombinant spider silk on the biomolecular corona composition. In-depth proteomic analysis of the biomolecular corona revealed that positively charged spider silk materials surfaces interacted predominantly with fibrinogen-based proteins. This fibrinogen enrichment correlated with blood clotting observed for both positively charged spider silk films and particles. In contrast, negative surface charges prevented blood clotting. Genetic engineering allows the fine-tuning of surface properties of the spider silk particles providing a whole set of recombinant spider silk proteins with different charges or peptide tags to be used for, for example, drug delivery or cell docking, and several of these were analyzed concerning the composition of their biomolecular corona. Taken together this study demonstrates how the surface net charge of recombinant spider silk surfaces affects the composition of the biomolecular corona, which in turn affects macroscopic effects such as fibrin formation and blood clotting.

The interaction between nanoparticles-protein corona complex and cells and its toxic effect on cells

Once nanoparticles (NPs) contact with the biological fluids, the proteins immediately adsorb onto their surface, forming a layer called protein corona (PC), which bestows the biological identity on NPs. Importantly, the NPs-PC complex is the true identity of NPs in physiological environment. Based on the affinity and the binding and dissociation rate, PC is classified into soft protein corona, hard protein corona, and interfacial protein corona. Especially, the hard PC, a protein layer relatively stable and closer to their surface, plays particularly important role in the biological effects of the complex. However, the abundant corona proteins rarely correspond to the most abundant proteins found in biological fluids. The composition profile, formation and conformational change of PC can be affected by many factors. Here, the influence factors, not only the nature of NPs, but also surface chemistry and biological medium, are discussed. Likewise, the formed PC influences the interaction between NPs and cells, and the associated subsequent cellular uptake and cytotoxicity. The uncontrolled PC formation may induce undesirable and sometimes opposite results: increasing or inhibiting cellular uptake, hindering active targeting or contributing to passive targeting, mitigating or aggravating cytotoxicity, and stimulating or mitigating the immune response. In the present review, we discuss these aspects and hope to provide a valuable reference for controlling protein adsorption, predicting their behavior in vivo experiments and designing lower toxicity and enhanced targeting nanomedical materials for nanomedicine.

D-shaped plastic optical fibre aptasensor for fast thrombin detection in nanomolar range

The development of optical biosensors for the rapid and costless determination of clinical biomarkers is of paramount importance in medicine. Here we report a fast and low-cost biosensor based on a plasmonic D-shaped plastic optical fibre (POF) sensor derivatized with an aptamer specific for the recognition of thrombin, the target marker of blood homeostasis and coagulation cascade. In particular, we designed a functional interface based on a Self Assembled Monolayer (SAM) composed of short Poly Ethylene Glycol (PEG) chains and biotin-modified PEG thiol in ratio 8:2 mol:mol, these latter serving as baits for the binding of the aptamer through streptavidin-chemistry. The SAM was studied by X-ray Photoelectron Spectroscopy (XPS) analysis, static contact angle (CA), Surface Plasmon Resonance (SPR) in POFs, and fluorescence microscopy on gold surface. The optimized SAM composition enabled the immobilization of about 112 ng/cm² of aptamer. The thrombin detection exploiting POF-Aptasensor occurred in short times (5–10 minutes), the reached Limit of Detection (LOD) was about 1 nM, and the detection range was 1.6–60 nM, indicating the POF-Aptasensor well addresses the needs for a low-cost, simple to use and to realize, rapid, small size and portable diagnostic platform.

Link between Low-Fouling and Stealth: A Whole Blood Biomolecular Corona and Cellular Association Analysis on Nanoengineered Particles

Upon exposure to human blood, nanoengineered particles interact with a multitude of plasma components, resulting in the formation of a biomolecular corona. This corona modulates downstream biological responses, including recognition by and association with human immune cells. Considerable research effort has been directed toward the design of materials that can demonstrate a low affinity for various proteins (low-fouling materials) and materials that can exhibit low association with human immune cells (stealth materials). An implicit assumption common to bio-nano research is that nanoengineered particles that are low-fouling will also exhibit stealth. Herein, we investigated the link between the low-fouling properties of a particle and its propensity for stealth in whole human blood. High-fouling mesoporous silica (MS) particles and low-fouling zwitterionic poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) particles were synthesized, and their interaction with blood components was assessed before and after precoating with serum albumin, immunoglobulin G, or complement protein C1q. We performed an in-depth proteomics characterization of the biomolecular corona that both identifies specific proteins and measures their relative abundance. This was compared with observations from a whole blood association assay that identified with which cell type each particle system associates. PMPC-based particles displayed reduced association both with cells and with serum proteins compared with MS-based particles. Furthermore, the enrichment of specific proteins within the biomolecular corona was found to correlate with association with specific cell types. This study demonstrates how the low-fouling properties of a material are indicative of its stealth with respect to immune cell association.

High separation efficiency of gold nanomaterials of different aspect ratio and size using capillary transient isotachophoresis

Two modes of capillary electrophoresis (CE), capillary zone electrophoresis (CZE) and capillary transient isotachophoresis (ctITP), were compared for the detection and separation of spherical gold nanoparticles (AuNPs) and gold nanorods (AuNRs). The development of ctITP using two different leading ions is described. Overall, when compared to traditional capillary zone electrophoresis (CZE), ctITP resulted in improved peak shape and peak efficiency. Specifically, the number of theoretical plates for AuNR samples increased by a factor of 2-2.5 depending on the choice of leading ion. Further, using ctITP two AuNRs differing by aspect ratio were baseline resolved, whereas the same AuNRs could not be separated using CZE or other techniques like single particle inductively coupled plasma mass spectrometry (spICP-MS) and asymmetric flow field-flow fractionation (AF4). The results of this study demonstrate that ctITP is an efficient on-line technique for the improved detection and separation of gold nanomaterials in CE.