Fast, sensitive and reliable multi-residue method for routine determination of 34 pesticides from various chemical groups in water samples by using dispersive liquid–liquid microextraction coupled with gas chromatography–mass spectrometry

Rapid method for detection, quantification and measuring microbial degradation of pesticide-thiram using high performance thin layer chromatography (HPTLC)

Thiram (tetramethylthiuramdisulfide) or thiram sulphide is a dithiocarbamate group of non-systemic group of fungicide which are applied for seed treatment, control of the crop pests, to repel animals, etc. Moreover, thiram has also been responsible to cause moderate skin sensitivity and eye irritation. Higher exposure to thiram might also lead to developmental damages to newborn and neurotoxic effects to non-target organisms. Advancing to prevent such toxic effects and prevention of soil fertility from thiram and thiram-like chemicals is indispensable. The analytical High-Performance Thin-Layer Chromatography (HPTLC) is a simple, quick and a reliable method was proposed and validated for the detection and quantification of various small molecules for many years. This manuscript represents the solution to use microbes to degrade the thiram present in the soil and for that, HPTLC based method to study thiram degradation by Pseudomonas has been designed. Herein, a HPTLC protocol formalised to reveal the detection and quantification of thiram within the range of 100 to 700 ng/spot on TLC plate. The same concentration was then used for calculating percent microbial degradation of thiram from the culture broth. To perform the microbial degradation of thiram, Pseudomonas otitidis strain TD-8 and Pseudomonas stutzeri strain TD-18 were taken as thiram degrader microbial strain. The efficacy of TD-8 to degrade thiram was identified to be 81 and 99% when grown in presence of thiram for 4 days and 8 days, respectively, while TD-18 strain's efficacy to degrade thiram was found to be 57% and 99% when grown in presence of thiram for 4 days and 8 days, respectively.

Seasonal distribution of multiclass pesticide residues in the surface waters of northwest Croatia

As part of our OPENTOX project, we evaluated the incidence and mass concentrations of multiclass pesticide residues in 23 river/stream water samples collected in urban and agricultural areas of northwest Croatia at various points of the pesticide application season in 2015. The study included 16 compounds of five herbicide classes and seven compounds of three insecticide classes. Pesticide residues were accumulated from water by solid-phase extraction and analysed using high performance liquid chromatography with UV-diode array detection and/or gas chromatography-mass spectrometry. Herbicide residues were more common than the insecticide ones, and, as expected, they peaked in the middle of the application season. Metolachlor showed the highest concentrations and was found in 91 % of all samples, followed by terbuthylazine, found in 70 % of the samples. The highest total mass concentration of detected pesticides was measured in the water samples of the Krapina (3992 ng/L) and Sutla (3455 ng/L) collected in rural areas with intensive agriculture. Our findings strongly speak in favour of continued monitoring of surface waters and possibly extending the list of priority water pollutants.

Multiclass Pesticide Residues in Fruits and Vegetables from Brazil: A Systematic Review of Sample Preparation Until Post-Harvest

Brazil annually produces around 43 million tons of fruits and vegetables. Therefore, large amounts of pesticides are needed to grow these foods. The use of unauthorized or indiscriminate pesticides can lead to the adherence of residues of these compounds to the product in a concentration above the maximum residue limit (MRL). Pesticide residues (PRs) monitoring is a continuous challenge due to several factors influencing the detection of these compounds in the food matrix. Currently, several adaptations to conventional techniques have been developed to minimize these problems. This systematic review presents the main information obtained from 52 research articles, taken from five databases, on changes and advances in Brazil in sample preparation methods for determining PRs in fruits and vegetables in the last nine years. We cover the preexisting ones and some others that might be suitable alternatives approaches. In addition, we present a brief discussion on the monitoring of PRs in different Brazilian regions, and we found that residues belonging to the organophosphate and pyrethroid classes were detected more frequently. Approximately 67% of the residues detected are of irregular use in 28 types of fruits and vegetables commonly consumed and exported by Brazil.

Enantiomer/stereoisomer-specific residues of metalaxyl, napropamide, triticonazole, and metconazole in agricultural soils across China

In this study, the residual status of four chiral pesticides including metalaxyl, napropamide, triticonazole, metconazole, and their enantiomers/stereoisomers were investigated in agricultural soils across China. The levels in the soils were detected as non-detected (n.d.)-16.67 ng/g for metalaxyl with a median of 0.14 ng/g; 0.004-32.99 ng/g for napropamide with a median of 0.29 ng/g; n.d.-207.39 ng/g for triticonazole with a median of 1.29 ng/g; and n.d.-71.83 ng/g for metconazole with a median of 1.03 ng/g, respectively. Enantiomer/stereoisomer-specific residues were observed for metalaxyl and triticonazole. R-Metalaxyl and R-triticonazole were identified as the major enantiomers in the soils for the two pesticides. There was no obvious enantioselective residue for napropamide in most of the soils. As for metconazole, metconazole-1 and metconazole-4 were identified as the major stereoisomers in the soils. These results suggest that enantiomer/stereoisomer-specific risk should be considered when assessing the ecological safety of these pesticides in soils.

A scalable workflow to characterize the human exposome

Complementing the genome with an understanding of the human exposome is an important challenge for contemporary science and technology. Tens of thousands of chemicals are used in commerce, yet cost for targeted environmental chemical analysis limits surveillance to a few hundred known hazards. To overcome limitations which prevent scaling to thousands of chemicals, we develop a single-step express liquid extraction and gas chromatography high-resolution mass spectrometry analysis to operationalize the human exposome. We show that the workflow supports quantification of environmental chemicals in human plasma (200 µL) and tissue (≤100 mg) samples. The method also provides high resolution, sensitivity and selectivity for exposome epidemiology of mass spectral features without a priori knowledge of chemical identity. The simplicity of the method can facilitate harmonization of environmental biomonitoring between laboratories and enable population level human exposome research with limited sample volume.

A miniaturized spray-assisted fine-droplet-formation-based liquid-phase microextraction method for the simultaneous determination of fenpiclonil, nitrofen and fenoxaprop-ethyl as pesticides in soil samples

RATIONALE

Pesticides are a group of micropollutants that persist for a long time in the environment and pose threats to life. Much effort has been devoted to developing pre-concentration methods capable of producing samples suitable for the detection of pesticides. However, better methods are still required to detect these compounds when they are present in trace concentrations in soils.

METHOD

Spray-assisted fine-droplet-formation-based liquid-phase microextraction was used to prepare soil samples containing three different pesticides, fenpiclonil, nitrofen and fenoxaprop-ethyl, for subsequent analysis by gas chromatography/mass spectrometry (GC/MS). A spraying apparatus was used for the dispersion of the extraction solvent into the sample/standard solution to improve the extraction efficiency. Optimization studies were performed to lower the detection limits of these analytes and the results obtained by the application of the newly developed system were compared with those obtained using the conventional GC/MS method.

RESULTS

A calibration curve over the range 5.0-100 μg L^-1 was obtained under the optimal conditions. The limits of detection and quantification were 1.56-1.80 μg L^-1 and 5.21-5.98 μg L^-1 , respectively. The enhancements in detection ability over the conventional method for the three tested pesticides were 188.01, 176.96 and 517.14 for fenpiclonil, nitrofen and fenoxaprop-ethyl, respectively Recovery studies performed in soil samples were satisfactory reflecting accurate applicability of the developed method.

CONCLUSIONS

The developed microextraction method is a time-saving and simple version of the traditional dispersive liquid-liquid microextraction method that also reduces the use of dispersive solvents.

Enhanced microextraction of endocrine disrupting chemicals adsorbed on airborne fine particulate matter with gas chromatography-tandem mass spectrometric analysis

A novel double-microextraction approach, combining dispersive liquid-liquid microextraction (DLLME) and vortex-assisted micro-solid-phase extraction (VA-µ-SPE) was developed. The procedure was applied to extract endocrine disrupting chemicals (EDCs) consisting of three phthalate esters (PEs) and bisphenol A (BPA) associated with PM_2.5 (airborne particulate matter with aerodynamic diameter ≤ 2.5 µm). Gas chromatography-tandem mass spectrometry (GC-MS/MS) was used for determination of the analytes. These analytes were first ultrasonically desorbed from PM_2.5 in a 10% acetone aqueous solution. DLLME was used to first preconcentrate the analytes; the sample solution, still in the same vial, was then subjected to VA-µ-SPE. The synergistic effects provided by the combination of the microextraction techniques provided advantages such as high enrichment factors and good cleanup performance. Various extraction parameters such as type and volume of extractant solvent (for DLLME), and type of sorbent, extraction time, desorption solvent, volume of desorption solvent and desorption time (for µ-SPE) were evaluated. Multi-walled carbon nanotubes were found to be the most suitable sorbent. This procedure achieved good precision with intra- and inter-day relative standard deviations of between 1.93 and 9.95%. Good linearity ranges (0.3-100 ng/mL and 0.5-100 ng/mL, depending on analytes), and limits of detection (LODs) of between 0.07 and 0.15 ng/mL were obtained. The method was used to determine the levels of PEs and BPA in ambient air, with concentrations ranging between below the limits of quantification and 0.48 ng/m³. DLLME-VA-µ-SPE-GC-MS/MS was demonstrated to be suitable for the determination of these EDCs present in PM_2.5.

Determination of fenazaquin in water and tomato matrices by GC-MS after a combined QuEChERS and switchable solvent liquid phase microextraction

This study presents the use of Quick Easy Cheap Efficient Rugged and Safe (QuEChERS) as an effective sample cleaning procedure and switchable solvent liquid phase microextraction (SS-LPME) as a preconcentration tool for the determination of fenazaquin by gas chromatography mass spectrometry (GC-MS) at ultratrace levels. After a thorough optimization process, 0.50 mL of switchable solvent, 1.5 mL of 1.0 M sodium hydroxide, and 15 s of vortexing were determined as optimum conditions of the SS-LPME method. The limit of detection (LOD) and limit of quantitation (LOQ) determined using the optimum method (SS-LPME/GC-MS) were 0.05 and 0.18 ng/mL, respectively. Compared with direct GC-MS determination of fenazaquin, the optimum method yielded about 800-fold enhancement in detection power of GC-MS. The method was applied to lake, irrigation canal, well, and wastewater samples. In order to test the method's applicability on fresh tomato samples, a QuEChERS method was used before applying the SS-LPME method. Matrix-matched calibration standards were used to enhance the accuracy of fenazaquin quantification in spiked tomato samples to obtain recovery results close to 100%.

Developments and applications of nanomaterial-based carbon paste electrodes

This review summarizes the progress that has been made in the past ten years in the field of electrochemical sensing using nanomaterial-based carbon paste electrodes. Following an introduction into the field, a first large section covers sensors for biological species and pharmaceutical compounds (with subsections on sensors for antioxidants, catecholamines and amino acids). The next section covers sensors for environmental pollutants (with subsections on sensors for pesticides and heavy metal ions). Several tables are presented that give an overview on the wealth of methods (differential pulse voltammetry, square wave voltammetry, amperometry, etc.) and different nanomaterials available. A concluding section summarizes the status, addresses future challenges, and gives an outlook on potential trends.

This review summarizes the progress that has been made in the past ten years in the field of electrochemical sensing using nanomaterial-based carbon paste electrodes.

Analytical Methodology for Trace Determination of Propoxur and Fenitrothion Pesticide Residues by Decanoic Acid Modified Magnetic Nanoparticles

A sensitive, rapid, reliable, and easily applicable method based on magnetic solid phase extraction (MSPE) combined with HPLC-PDA was developed for monitoring propoxur (PRO) and fenitrothion (FEN) pesticides in environmental water samples. The effect of major experimental variables on the extraction efficiency of both the pesticides was investigated and optimized systematically. For this purpose, a new magnetic material containing decanoic acid on the surface of particles was synthesized and characterized by XRD, FT-IR, SEM, EDX, and TGA analysis in detail. The simultaneous determination of pesticide molecules was carried out by using a Luna Omega C18 column, isocratic elution of acetonitrile (ACN): Water (70:30 v/v) with a flow rate of 1.2 mL min^-1. After MSPE, the linear range for pesticide molecules (r² > 0.9982) was obtained in the range of 5-800 and 10-800 ng mL^-1, respectively. The limit of detections (LOD) are 1.43 and 4.71 ng mL^-1 for PRO and FEN, respectively while RSDs % are below 3.5%. The applicability of the proposed method in four different environmental samples were also investigated using a standard addition-recovery procedure. Average recoveries at two spiking levels were over the range of 91.3-102.5% with RSD < 5.0% (n = 3). The obtained results show that decanoic acid grafted magnetic particles in MSPE combined with HPLC-PDA is a fast and simple method for the determination of PRO and FEN in environmental water samples.

A beta-cyclodextrin-functionalized magnetic metal organic framework for efficient extraction and determination of prochloraz and triazole fungicides in vegetables samples

A β-cyclodextrin-functionalized magnetic zinc-metal organic framework (M-MOF/β-CD) was synthesized via a facile one-pot reaction. M-MOF/β-CD was used as a magnetic porous absorbent for the extraction and determination of prochloraz and three triazole fungicides in vegetable samples. M-MOF/β-CD was prepared by creating MOF layers on the surface of a Fe₃O₄-graphene oxide (GO) nanocomposite and bonding them with β-CD molecules. Characterization suggested that a 3D porous structure was formed, with M-MOF/β-CD exhibiting high superparamagnetism and a large surface area. As a new strategy, integrating MOFs with Fe₃O₄-GO could improve their water-resistance and mechanical strength by providing a rigid nanosupport interface. Combining M-MOF and β-CD resulted in excellent selective adsorption capacities for prochloraz and three triazole fungicides. The static adsorption process was evaluated and the results were in good agreement with the Freundlich model. Subsequently, M-MOF/β-CD was applied to extracting prochloraz and triazole fungicides from tomato and lettuce vegetables, followed by HPLC-MS/MS determination. The limits of detection for the above fungicides were found to be 0.25-1.0 μg/L at a signal-to-noise ratio of 3, with spiked recoveries of 74.13%-119.83%, indicating that M-MOF/β-CD was promising for application to the extraction and determination of fungicides in complex matrices.

Bio-barcode detection technology and its research applications: A review

With the rapid development of nanotechnology, the bio-barcode assay (BCA), as a new diagnostic tool, has been gradually applied to the detection of protein and nucleic acid targets and small-molecule compounds. BCA has the advantages of high sensitivity, short detection time, simple operation, low cost, good repeatability and good linear relationship between detection results. However, bio-barcode technology is not yet fully formed as a complete detection system, and the detection process in all aspects and stages is unstable. Therefore, studying the optimal reaction conditions, optimizing the experimental steps, exploring the multi-residue detection of small-molecule substances, and preparing immuno-bio-barcode kits are important research directions for the standardization and commercialization of BCA. The main theme of this review was to describe the principle of BCA, provide a comparison of its application, and introduce the single-residue and multi-residue detection of macromolecules and single-residue detection of small molecules. We also compared it with other detection methods, summarized its feasibility and limitations, expecting that with further improvement and development, the technique can be more widely used in the field of stable small-molecule and multi-residue detection.

Extending the scope of dispersive liquid-liquid microextraction for trace analysis of 3-methyl-1,2,3-butanetricarboxylic acid in atmospheric aerosols leading to the discovery of iron(III) complexes

3-Methyl-1,2,3-butanetricarboxylic acid (MBTCA) is a secondary organic aerosol and can be used as a unique emission marker of biogenic emissions of monoterpenes. Seasonal variations and differences in vegetation cover around the world may lead to low atmospheric MBTCA concentrations, in many cases too low to be measured. Hence, an important tool to quantify the contribution of terrestrial vegetation to the loading of secondary organic aerosol may be compromised. To meet this challenge, a dispersive liquid–liquid microextraction (DLLME) method, known for the extraction of hydrophobic compounds, was extended to the extraction of polar organic compounds like MBTCA without compromising the efficiency of the method. The extraction solvent was fine-tuned using tri-n-octyl phosphine oxide as additive. A multivariate experimental design was applied for deeper understanding of significant variables and interactions between them. The optimum extraction conditions included 1-octanol with 15% tri-n-octyl phosphine oxide (w/w) as extraction solvent, methanol as dispersive solvent, 25% NaCl dissolved in 5 mL sample (w/w) acidified to pH 2 using HNO₃, and extraction time of 15 min. A limit of detection of 0.12 pg/m³ in air was achieved. Furthermore, unique complexation behavior of MBTCA with iron(III) was found when analyzed with ultra-high-performance liquid chromatography coupled with electrospray ionization–quadrupole time-of-flight mass spectrometry (UHPLC–ESI–QToF). A comprehensive overview of this complexation behavior of MBTCA was examined with systematically designed experiments. This newly discovered behavior of MBTCA will be of interest for further research on organometallic photooxidation chemistry of atmospheric aerosols.

Graphical abstract

Peroxidase-like activity of acetylcholine-based colorimetric detection of acetylcholinesterase activity and an organophosphorus inhibitor

Colorimetric detection of acetylcholinesterase (AChE) and its inhibitor organophosphates (OPs) is attractive for its convenience, but the addition of exogenous catalyst to produce a chromogenic agent may result in complexity and interference. Herein, we first found that acetylcholine (ATCh) itself mimicked peroxidase's activity, based on which a simple and reliable colorimetric system containing ATCh- 3,3',5,5'-tetramethylbenzidine (TMB)-H₂O₂ was developed for the sensitive and selective assay of AChE activity and its inhibitor OPs. Due to the AChE-catalyzed hydrolysis of acetylcholine, the peroxidase-like activity was affected, which was used for highly sensitive detection of AChE activity with a low limit of detection (LOD) of 0.5 mU mL^-1 and a linear detection range from 2.0 to 14 mU mL^-1. Furthermore, due to the inhibition of OPs on AChE, OPs were also detected with the present ATCh regulated colorimetric system with LOD of 4.0 ng mL^-1 and a linear dynamic range from 10 to 10 000 µg L^-1. This strategy was also demonstrated to be applicable for pesticide detection in real samples. Meanwhile, the sensing platform can also be implemented on test strips for rapid and visual monitoring of OPs. Thus, this extremely simple colorimetric strategy without the addition of other exogenous catalysts holds great promise for on-site pesticide detection and can be further exploited for sensing applications in the environmental and food safety fields.

Multi-residue enantiomeric analysis of 18 chiral pesticides in water, soil and river sediment using magnetic solid-phase extraction based on amino modified multiwalled carbon nanotubes and chiral liquid chromatography coupled with tandem mass spectrometry

This manuscript describes, for the first time, the multi-residue analysis of 18 chiral pesticides at enantiomeric levels in both environmental liquid (river water, influent and effluent wastewater) and solid matrices (agricultural soil, forestal soil and river sediment) based on magnetic solid-phase extraction (MSPE) and chiral liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). Magnetic amino modified multiwalled carbon nanotubes (m-MWCNTs-NH₂) were prepared and firstly applied to adsorb pesticides from complex matrices. Response surface methodology (RSM) was applied to assist the multivariable optimization. The simultaneous enantioseparation of the chiral pesticides was performed on a Chiralpak IG column. Under the optimum conditions, the mean recoveries for pesticides enantiomers from the water matrices ranged from 81.1 to 106.3% with intra-day RSD of 2.1-11.9% and inter-day RSD of 2.6-12.7%; the mean recoveries for all enantiomers from the solid matrices ranged from 80.3 to 105.9% with intra-day RSD of 2.3-10.9% and inter-day RSD of 4.0-13.4%. Good linearity was achieved for all enantiomers with determination coefficients (r²) greater than 0.9912. Method quantification limits were below 2.04ng L^-1 in liquid matrices and below 0.50ng g^-1 in solid matrices. The developed method offered some advantages, such as simple operation, rapidity and high concentration factor. Therefore, it is suitable for monitoring the enantiomeric compositions of chiral pesticides in different environmental matrices.