Highly sensitive detection of a small molecule by a paired labels recognition system based lateral flow assay

Goat anti-mouse immunoglobulin as "crosslinker" assisted signal tracer assemble with intensive antibody utilization efficiency for sensitive paper-based strip nanobiosensors

Engineered collaborative biochemical techniques and regulated nanomaterials (NMs) offer extraordinary opportunities for improving the analysis performance of lateral flow immunoassay (LFIA). Herein, inspired by the ability of macromolecules (e.g., proteins) to assemble into new functional units and the remarkable optical performance of engineered regulated NMs, goat anti-mouse immunoglobulin (GAMI) serves as the "crosslinker" integrate with gold‑manganese oxide (Au-MnOx) to assemble the "signal tracers (STs)-crosslinker-antibody (mAb)" for elevating the mAb utilization efficiency. Notably, the "STs-crosslinker-mAb" assembly shows ~13.33-folds mAb utilization efficiency enhance, which perfectly response the challenge between limited sensitivity and sufficient signal intensity in competitive-type LFIA. The black color and rough structure of Au-MnOx offer higher colorimetric brightness (~2-folds than AuNPs) and enhanced mAb coupling efficiency (up to 92.47%), which further improves sensitivity under the premise of functional assembly to intensify the competitive immunoreaction. Additionally, the convenient synthesis conditions (~13 min at room temperature) even comparable to direct purchase commercial products indicate that using Au-MnOx undoubtedly increases the cost-effectiveness. Encouragingly, the Au-MnOx-GAMI-mAb based LFIA exhibited high sensitivity (LOD: 0.063 ng mL-1 for clenbuterol (CLE) monitoring) by elevating mAb utilization efficiency with the attendant enhancing immune competition response in a cost-effective manner, which provides an invigorating reference pathway in point-of-care immunoassay.

Paper-based biosensors relying on core biological immune scaffolds for the detection of procymidone in vegetables

In order to achieve a highly sensitive detection of procymidone in vegetables, three paper-based biosensors based on a core biological immune scaffold (CBIS) were developed, which were time-resolved fluorescence immunochromatography strips with Europium (III) oxide (Eu-TRFICS). Goat anti-mouse IgG and europium oxide time-resolved fluorescent microspheres formed secondary fluorescent probes. CBIS was formed by secondary fluorescent probes and procymidone monoclonal antibody (PCM-Ab). The first type of Eu-TRFICS (Eu-TRFICS-(1)) fixed secondary fluorescent probes on a conjugate pad, and PCM-Ab was mixed with a sample solution. The second type of Eu-TRFICS (Eu-TRFICS-(2)) fixed CBIS on the conjugate pad. The third type of Eu-TRFICS (Eu-TRFICS-(3)) was directly mixed CBIS with the sample solution. They solved the problems of steric hindrance of antibody labeling, insufficient exposure of antigen recognition region and easy loss of activity in traditional methods. They realized multi-dimensional labeling and directional coupling. They replaced the loss of antibody activity. And the three types of Eu-TRFICS were compared, among which Eu-TRFICS-(1) was the best detection choice. Antibody usage was reduced by 25% and sensitivity was increased by 3 times. Its detection range was 1-800 ng/mL, the limit of detection (LOD) was 0.12 ng/mL with the visible LOD (vLOD) of 5 ng/mL.

Colorimetric-photothermal-magnetic three-in-one lateral flow immunoassay for two formats of biogenic amines sensitive and reliable quantification

Rapid, simple, sensitive and reliable approaches for biogenic amines quantification in various food samples are essential to food safety. Lateral flow immunoassay (LFIA) has been wildly utilized in point-of-care testing (POCT) owing to its advantage of flexibility and feasibility. Here, we reported a Fe₃O₄@Au nanoparticles (NPs) (Fe₃O₄@AuNPs) based multimodal readout LFIA for rapid putrescine (Put) and histamine (His) quantification with a LOD down to 10 and 10 ng/mL in naked eye mode, 2.31 and 4.39 ng/mL in photothermal mode, 0.17 and 0.31 ng/mL in magnetic mode, respectively. Such multi-mode assay has been successfully used to detect Biogenic amines (BAs) in raw aquatic foods, including fish, prawns, beef, and pork, with overall recoveries ranging from 93.68 to 109.34%. Meanwhile, it is easily expanded to detect other typical BAs with high sensitivity by simply replacing antibodies. In view of the multi-signal reading, two quantitative formats, and high sensitivity, it may greatly widen the application of lateral flow detection in food safety.

AIEgens: Next Generation Signaling Source for Immunoassays?

Luminogens with aggregation-induced emission (AIEgens) properties have numerous broad applications in fields of chemical and biological analyses due to their exceptional photostability, excellent signal reliability, high quantum yield, and large Stokes' shift. In particular, AIEgens also bring new blood for immunoassay. Since publication of the first 2004 paper, AIEgens-based immunoassays have received significant attention because of their high sensitivity, specificity, accuracy, and reliability. However, until now, there have been no comprehensive literature reviews focused on the evolving field of AIEgens-based immunoassays. Thus, we have extensively reviewed AIEgens-based immunoassays from their basic working principles to specific applications. We focus on several fundamental elements of AIEgens-based immunoassays, including the typical structures of AIEgens, emission mechanism of AIEgens probes, function of AIEgens in immunoassays, and platform of AIEgens-based immunoassays. Then, the representative applications of AIEgens-based immunoassays in food safety, medical diagnostics, and environmental monitoring are explored. Thus, proposals on how to further improve the AIEgens-based immunoassay performance are also discussed, as well as future challenges and perspectives, aiming to provide brief and valid guidelines for choosing suitable AIEgens-based immunoassays according to specific application requirements.

Progress in Biosensors for the Point-of-Care Diagnosis of COVID-19

Coronavirus disease 2019 (COVID-19) is a highly virulent infection that has caused a pandemic since 2019. Early diagnosis of the disease has been recognized as one of the important approaches to minimize the pathological impact and spread of infection. Point-of-care tests proved to be substantial analytical tools, and especially lateral flow immunoassays (lateral flow tests) serve the purpose. In the last few years, biosensors have gained popularity. These are simple but highly sensitive and accurate analytical devices composed from a selective molecule such as an antibody or antigen and a sensor platform. Biosensors would be an advanced alternative to current point-of-care tests for COVID-19 diagnosis and standard laboratory methods as well. Recent discoveries related to point-of-care diagnostic tests for COVID-19, the development of biosensors for specific antibodies and specific virus parts or their genetic information are reviewed.

Sensitive, simultaneous and quantitative detection of deoxynivalenol and fumonisin B1 in the water environment using lateral flow immunoassay integrated with smartphone

Deoxynivalenol (DON) and fumonisin B₁ (FB₁), as a group of highly toxic secondary metabolites, have become a potential source of water environmental pollutants. To minimize two mycotoxins exposure to consumers, a dual lateral flow immunoassay (LFIA) integrated with the smartphone was reported for simultaneous and quantitative detection of DON and FB₁ in the water environment. The significantly improved sensitivity was contributed to a smartphone-based device with the ability to image and analyze results. Under optimized conditions, the detection limits of DON and FB₁ were calculated to be 3.46 and 2.65 ng/mL, which were approximately 25 and 10 folds lower than those of the visual detection of the LFIA. This method showed good specificity and a good dynamic linear detection for DON and FB₁. The recoveries of DON and FB₁ were evaluated by the spiked lake water, river water, and pond water, ranging from 92.47% to 106.2% with the relative standard deviation under 9.13%. Moreover, the results of the developed LFIA showed a high correlation with enzyme-linked immunosorbent assay (ELISA) results, with a correlation coefficient of 0.999 for DON and 0.996 for FB₁, respectively. To sum up, the developed LFIA provides a promising platform for sensitive, simultaneous, quantitative, and on-site detection of DON and FB₁ in the water environment.

Expanded detection range of lateral flow immunoassay endowed with a third-stage amplifier indirect probe

Here, a third-stage amplifier indirect probe (TsAIP) based lateral flow immunoassay (LFIA) was proposed to detect furazolidone (FZD) with Prussian blue nanoparticles (PBNPs) as carrier to label the goat anti-mouse antibody-horseradish peroxidase conjugation [GAMA(HRP)]. In this strategy, owing to the fact that one monoclonal antibody (mAb) can combine several GAMA molecules simultaneously, the indirect probe can generate primary signal amplification, then realize second-stage amplification attributing to PBNPs, and finally achieve third-stage amplification because of the conjugated HRP. The TsAIP-based LFIA shows improved performance for FZD metabolite derivative with a detection limit of 1 ng mL^-1. The detection range is expanded about 2-fold compared with the original outcome. Besides, the proposed sensor could be successfully applied in food samples. This method provides a platform for broadening the detection range and application of PBNPs based LFIAs.

Development of a Highly Sensitive and Specific ic-ELISA and Lateral Flow Immunoassay for Diacetoxyscirpenol

To monitor the contamination of a type A trichothecene, diacetoxyscirpenol (DAS), one monoclonal antibody (mAb) 8A9 with high affinity and specificity was prepared in the present study. The mAb 8A9 showed a 50% inhibition concentration (IC₅₀) of 0.31 μg/L, which is of the highest affinity reported to date. An indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) and lateral flow immunoassay (LFIA) based on mAb 8A9 were developed and exhibited limits of detection as low as 0.65 μg/kg and 100 μg/kg in rice samples, respectively. The molecular recognition mechanism of mAb 8A9 to DAS was explored by molecular docking. The results showed that the hydrophobic amino acids of mAb 8A9 interacted with DAS by forming hydrogen bonds and a pi-sigma bond, which lead to a highly specific recognition of DAS. In summary, we produced one mAb, developed ELISA and LFIA for DAS detection in rice with significantly sensitivity, specificity, accuracy, and precision.

Visual-afterglow dual-mode immunochromatographic strip for 17β-estradiol detection in milk

The continuous intake of 17β-estradiol (E2) residue from animal-derived food may pose a threat to the health of consumers, so the rapid screen and detection of E2 is very necessary. Although visual immunochromatographic strip (ICS) has played a great role in food safety control such as the screen of many food contaminants, it cannot meet the requirements for E2 detection due to the insufficient sensitivity of traditional visual ICS and the low concentration range of estrogen in food. Here, we developed a dual-mode ICS strategy to achieve rapid and highly sensitive detection of E2. Based on the visual detection mode of a competitive ICS, the afterglow detection mode working in fluorescence resonance energy transfer mechanism was introduced by using the afterglow particles (APs) as energy donor and gold nanoparticles (AuNPs) as energy acceptor. In this method, large APs of micron size with superior afterglow were applied as the test zone-fixed fluorescence signal source, thus the contradiction between migration and afterglow characteristics was skillfully resolved. In addition, a 6 W UV lamp was used as the light source to excite APs, and a smartphone was used to capture an image of 0.5 s after the UV light was turned off to effectively remove the autofluorescence from the strips and improve the signal-to-noise ratio. The limit of detection of this afterglow mode was 0.5 ng/mL, twenty times more sensitive than that of visual mode (10 ng/mL). The strategy has been successfully applied to the detection of estradiol in milk and verified by HPLC-FLD.

Network of gold conjugates for enhanced sensitive immunochromatographic assays of troponins

Highly sensitive detection of cardiac troponins I and T (cTnI and cTnT) was completed by immunochromatography with double amplification, through the binding of functionalized gold nanoparticles (GNPs). The robust nature of the approach, based on the formation of nanoparticle networks through the biotin-streptavidin interaction, was confirmed; the choice of the best assay parameters for maximal increase in ICA sensitivity was demonstrated. A bifunctional conjugate of GNPs with biotinylated specific IgG and two auxiliary conjugates, GNP-biotin and GNP-streptavidin, form three-component aggregates in the analytical zone of the test strip. The inclusion of abundant gold labels in the resulting immune complex leads to an amplified colorimetric signal. The limits of detection (LoDs) of cTnI and cTnT were 0.9 and 0.4 ng mL-1, respectively, which is 3 times lower than the LoDs of more commonly used systems. Visual LoDs were 10-fold lower in concentration. The enhancement has been realized both in single and double assay formats; analysis of cTnI and cTnT presented the same characteristics.

Lateral flow immunoassay for furazolidone point-of-care testing: Cater to the call of saving time, labor, and cost by coomassie brilliant blue labeling

Furazolidone (FZD) and its metabolite called 3-amino-2-oxazolidinone (AOZ) would induce carcinogenic and mutagenic effects to human. In this work, to develop a novel, stable, and simple point of care testing (POCT) with a potential to social applied for FZD detection, we utilized the aspect of protein staining of coomassie brilliant blue (CBB) to exploit a new CBB-LFIA strategy free of NPs. Only one mixing step is needed during the probe manufacturing process, which requires just 2 h and is a great time saving strategy compared with other methods (requiring 4-33 h for probe preparation). Besides, the cost of CBB-LFIA is 300 times lesser than other LFIA with respect to obtaining the label. The developed CBB-LFIA was successfully applied to detect AOZ with a detection limit of 2 ng mL^-1, without any influence from other potential interfering compounds. The proposed CBB-LFIA exhibited prominent practical application, and possesses considerable utilization potential in the related field.

Graphite-like carbon nitride-laden gold nanoparticles as signal amplification label for highly sensitive lateral flow immunoassay of 17β-estradiol

Conventional gold nanoparticles-based lateral flow immunoassays (AuNPs-LFIA) lack sensitivity. In this work, we developed a graphite-like carbon nitride-laden AuNPs (g-C₃N₄@Au) assisted LFIA to improve sensitivity for 17β-estradiol (E2) in foods. g-C₃N₄ nanosheets were applied as carriers, because of their excellent chemical stability, large surface areas and low-cost, loading large numbers of AuNPs to amplify signals and improve the overall response of g-C₃N₄@Au-based LFIA (g-C₃N₄@Au-LFIA). The lowest visual limit of detection (vLOD) of E2 is 0.5 ng mL^-1 for g-C₃N₄@Au-LFIA, which exhibit a significantly three-fold improved analytical performance compared with that of AuNPs-LFIA. Additionally, this method was successfully used to the detection of E2 in four spiked food samples, offering a great potential of the g-C₃N₄@Au based LFIA for its application in food products.

A Rapid Immunochromatographic Method Based on a Secondary Antibody-Labelled Magnetic Nanoprobe for the Detection of Hepatitis B preS2 Surface Antigen

Hepatitis B is a globally prevalent viral infectious disease caused by the hepatitis B virus (HBV). In this study, an immunochromatographic assay (ICA) for the rapid detection of hepatitis B preS2 antigen (preS2Ag) was established. The magnetic nanoparticles (MNPs) indirectly labelled with goat anti-mouse (GAM) secondary antibody were applied as a nanoprobe for free preS2 antibody (preS2Ab) capturing and signal amplification. By employing sample pre-incubation processing as well, preS2Ag-preS2Ab was sufficiently caught by the GAM-MNPs probe in 5 min. A qualitative sensitivity of 625 ng/mL was obtained by naked-eye observation within 15-20 min. A standard curve (0-5000 ng/mL) was established, with a quantitative limit of detection (LOD) of 3.6 ng/mL, based on the stability and penetrability of the magnetic signal characteristics. The proposed method for preS2Ag was rapid (~25 min, cf. ELISA ~4 h) and had a good accuracy, which was verified using an ELISA kit (relative error < 15%). Large equipment and skilled technicians were not required. The sensitivity and specificity of the developed GAM-MNPs-ICA method were 93.3% and 90% in clinical serum samples (n = 25), respectively. A good detection consistency (84%) was observed between the developed ICA method and 2 types of commercial ELISA kits, indicating that the GAM-MNPs-ICA has a potential application in large-scale screening for and point-of-care diagnosis of hepatitis B or other infectious diseases.

Point-of-Care Diagnostics: Molecularly Imprinted Polymers and Nanomaterials for Enhanced Biosensor Selectivity and Transduction

Significant healthcare disparities resulting from personal wealth, circumstances of birth, education level, and more are internationally prevalent. As such, advances in biomedical science overwhelmingly benefit a minority of the global population. Point-of-Care Testing (POCT) can contribute to societal equilibrium by making medical diagnostics affordable, convenient, and fast. Unfortunately, conventional POCT appears stagnant in terms of achieving significant advances. This is attributed to the high cost and instability associated with conventional biorecognition: primarily antibodies, but nucleic acids, cells, enzymes, and aptamers have also been used. Instead, state-of-the-art biosensor researchers are increasingly leveraging molecularly imprinted polymers (MIPs) for their high selectivity, excellent stability, and amenability to a variety of physical and chemical manipulations. Besides the elimination of conventional bioreceptors, the incorporation of nanomaterials has further improved the sensitivity of biosensors. Herein, modern nanobiosensors employing MIPs for selectivity and nanomaterials for improved transduction are systematically reviewed. First, a brief synopsis of fabrication and wide-spread challenges with selectivity demonstration are presented. Afterward, the discussion turns to an analysis of relevant case studies published in the last five years. The analysis is given through two lenses: MIP-based biosensors employing specific nanomaterials and those adopting particular transduction strategies. Finally, conclusions are presented along with a look to the future through recommendations for advancing the field. It is hoped that this work will accelerate successful efforts in the field, orient new researchers, and contribute to equitable health care for all.

Polydopamine nanospheres as high-affinity signal tag towards lateral flow immunoassay for sensitive furazolidone detection

Currently, the low sensitivity and poor binding stability of detection probe prepared via electrostatic adsorption have become the dilemmas of colloidal gold-based lateral flow immunoassays (Au-LFIAs). In this connection, polydopamine nanospheres (PDA NPs) with an eminent covalent connectivity property were introduced as a promising substitute to improve the stability of probe and sensitivity of LFIA. Whereafter, the PDA NPs-based LFIA was applied for the monitoring of furazolidone (FZD) in food samples because of the potential carcinogenic/mutagenic effects to human of its metabolite (3-amino-2-oxazolidinone, AOZ). Compared with electrostatic adsorption, the binding stability of PDA NPs-based probes was superior. And, as expected, the PDA NPs-based LFIA biosensor exhibited higher sensitivity than that of the Au-LFIA with a detection limit of 3.5 ng mL^-1 for AOZ by naked-eye readout. Based on the significant enhanced binding stability and sensitivity, the PDA NPs-based LFIA is of certain spreading value for detecting other analytes.

Immunochromatographic fluorometric determination of clenbuterol with enhanced sensitivity

A method is described to enhance the sensitivity of an immunochromatographic assay for clenbuterol (CLE) by making use of dually-labeled gold nanoparticles (GNPs), background fluorescence blocking, and immunomagnetic separation. The GNPs were labeled with biotinylated antibody and streptavidin, respectively, and dually labeled GNPs were obtained via the biotin-streptavidin interaction to amplify the detection signal. The fluorescent signal was blocked by dually labeled GNPs and decreased as the dually labeled GNPs aggregation increases on nitrocellulose membrane, which derived from fluorescent polyvinylchloride card. However, fluorescence (measured at excitation/emission wavelengths of 518/580 nm) recovers when CLE reacts with dually labeled GNPs. Immunomagnetic separation was first applied for sample pretreatment. This can offset the matrix effect and improves the sensitivity and accuracy of the assay. Under the optimal conditions, the limits of detection of CLE visually were 0.25 μg·L^-1. In addition, clenbuterol can be quantified in swine urine with a 0.03 μg·L^-1 detection limit. This is 60-fold lower than current immunochromatography. Response is linear in the 0.06-0.59 μg·L^-1 concentration range, and the recoveries from spiked swine urine range from 81 to 115%." Graphical abstract Schematic presentation of the strategies for improving sensitivity of immunochromatographic assay. It includes immunomagnetic separations, dually-labeled gold nanoparticles and background fluorescence blocking. The assay was applied to detect clenbuterol (CLE) in swine urine with an excellent performance.

Competitive and noncompetitive immunoassays for the detection of benzothiostrobin using magnetic nanoparticles and fluorescein isothiocyanate-labeled peptides

Phage-displayed peptides have been proven to be powerful reagents for competitive and noncompetitive immunoassays. However, they are unconventional reagents, which greatly limit their analytical commercial applications and require additional reagents for detection. In this work, the peptides that specifically bind with anti-benzothiostrobin monoclonal antibody (mAb) or benzothiostrobin-mAb immunocomplex were synthesized and conjugated with fluorescein isothiocyanate (FITC) as substitutes of the phage-displayed peptides to avoid their shortcomings and extend their applications. Competitive and noncompetitive fluorescence immunoassays (FIAs) for benzothiostrobin were developed by mAb coupling with magnetic nanoparticles as concentration elements and peptides conjugated with FITC as tracers. Compared with enzyme-linked immunosorbent assays, the FIAs reduced the number of steps from 6 to 2 and analysis time from more than 5 to 1.2 h. The competitive FIA showed the half-maximal inhibition concentration (IC₅₀) of 16.8 ng mL^-1 and detection range (IC₁₀-IC₉₀) of 1.0-759.9 ng mL^-1, while the concentration of analyte producing 50% saturation of the signal (SC₅₀) and detection range (SC₁₀-SC₉₀) of noncompetitive FIA were 93.4 and 5.9-788.2 ng mL^-1, respectively. The average spiked recoveries were 68.33-98.50% and 73.33-96.67% for competitive and noncompetitive FIAs, respectively. The FIAs showed good correlation with high-performance liquid chromatography for the detection of benzothiostrobin in authentic samples. Graphical abstract Development of competitive and noncompetitive fluorescence immunoassays for benzothiostrobin by using monoclonal antibody coupling with magnetic nanoparticles as concentration elements and peptides conjugated with fluorescein isothiocyanate as tracers.