Polydopamine: surface coating, molecular imprinting, and electrochemistry—successful applications and future perspectives in (bio)analysis

Preparation of dual-functional epitope imprinted polymers for the enrichment of transferrin

Transferrin (TRF), a glycoprotein involved in cellular iron uptake, is a potential target for the diagnosis and treatment of several diseases and cancers. Therefore, the identification and isolation of TRF is clinically important. In this work, we prepared magnetic molecularly imprinted polymers (EMIP) based on metal chelation using norepinephrine and 3-aminophenylboronic acid as functional monomers. The obtained EMIP shows excellent recognition of TRF with the adsorption capacity of 94.2 mg/g and imprinting factor of 3.50. In addition, EMIP was characterized by high specificity, good adsorption performance and stability, and was successfully used for the analysis of TRF in human serum. The present study provides a reliable scheme for targeted epitope imprinting of polymers with metal chelating and dual-functional monomers, showing great potential for biosample analysis.

DNA aptamer-functionalized PDA nanoparticles: from colloidal chemistry to biosensor applications

Polydopamine nanoparticles (PDA NPs) are widely utilized in the field of biomedical science for surface functionalization because of their unique characteristics, such as simple and low-cost preparation methods, good adhesive properties, and ability to incorporate amine and oxygen-rich chemical groups. However, challenges in the application of PDA NPs as surface coatings on electrode surfaces and in conjugation with biomolecules for electrochemical sensors still exist. In this work, we aimed to develop an electrochemical interface based on PDA NPs conjugated with a DNA aptamer for the detection of glycated albumin (GA) and to study DNA aptamers on the surfaces of PDA NPs to understand the aptamer-PDA surface interactions using molecular dynamics (MD) simulation. PDA NPs were synthesized by the oxidation of dopamine in Tris buffer at pH 10.5, conjugated with DNA aptamers specific to GA at different concentrations (0.05, 0.5, and 5 μM), and deposited on screen-printed carbon electrodes (SPCEs). The charge transfer resistance of the PDA NP-coated SPCEs decreased, indicating that the PDA NP composite is a conductive bioorganic material. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) confirmed that the PDA NPs were spherical, and dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), and Raman spectroscopy data indicated the successful conjugation of the aptamers on the PDA NPs. The as-prepared electrochemical interface was employed for the detection of GA. The detection limit was 0.17 μg/mL. For MD simulation, anti-GA aptamer through the 5'terminal end in a single-stranded DNA-aptamer structure and NH2 linker showed a stable structure with its axis perpendicular to the PDA surface. These findings provide insights into improved biosensor design and have demonstrated the potential for employing electrochemical PDA NP interfaces in point-of-care applications.

Sustained release of brimonidine from conjunctival sac insert to reduce intraocular pressure for glaucoma treatment

BACKGROUND

Glaucoma is one of the major irreversible blinding eye diseases in the world. Reducing intraocular pressure (IOP) is the primary treatment option, and taking eye drops daily is the common method. However, short drug duration and poor bioavailability of eye drops may lead to unsatisfied therapeutic effects and inadequate patient compliance.

METHODS

A brimonidine-loaded silicone rubber insert (BRI@SR@PT) was prepared by loading brimonidine into a surface-modified silicone rubber ring, followed by polydopamine/thermoplastic polyurethane coatings. The physical properties, in vitro cytocompatibility and drug release of BRI@SR@PT were investigated. The BRI@SR@PT was administrated in the conjunctival sac of rabbit eyes, and its in vivo drug release, IOP-lowering efficacy and biosafety were assessed.

RESULTS

The BRI@SR@PT presented great thermal stability and excellent elasticity. The BRI@SR@PT was able to release BRI sustainably for 28 days with little toxicity in vitro. Compared to BRI eye drops, the BRI@SR@PT effectively lowered IOP for 21 days based on the sustained BRI release with great biosafety when administrated in conjunctival sac of rabbit eyes in a noninvasive fashion.

CONCLUSIONS

The conjunctival sac insert (BRI@SR@PT), as a promising drug-delivery platform, may provide a sustained IOP-lowering treatment for patients with ocular hypertension or glaucoma, without the need for invasive procedures.

IKVAV functionalized oriented PCL/Fe3O4 scaffolds for magnetically modulating DRG growth behavior

The re-bridging of the deficient nerve is the main problem to be solved after the functional impairment of the peripheral nerve. In this study, a directionally aligned polycaprolactone/triiron tetraoxide (PCL/Fe3O4) fiber scaffolds were firstly prepared by electrospinning technique, and further then grafted with IKVAV peptide for regulating DRG growth and axon extension in peripheral nerve regeneration. The results showed that oriented aligned magnetic PCL/Fe3O4 composite scaffolds were successfully prepared by electrospinning technique and possessed good mechanical properties and magnetic responsiveness. The PCL/Fe3O4 scaffolds containing different Fe3O4 concentrations were free of cytotoxicity, indicating the good biocompatibility and low cytotoxicity of the scaffolds. The IKVAV-functionalized PCL/Fe3O4 scaffolds were able to guide and promote the directional extension of axons, the application of external magnetic field and the grafting of IKVAV peptides significantly further promoted the growth of DRGs and axons. The ELISA test results showed that the AP-10 F group scaffolds promoted the secretion of nerve growth factor (NGF) from DRG under a static magnetic field (SMF), thus promoting the growth and extension of axons. Importantly, the IKVAV-functionalized PCL/Fe3O4 scaffolds could significantly up-regulate the expression of Cntn2, PCNA, Sox10 and Isca1 genes related to adhesion, proliferation and magnetic receptor function under the stimulation of SMF. Therefore, IKVAV-functionalized PCL/Fe3O4 composite oriented scaffolds have potential applications in neural tissue engineering.

Tuning the Chemical and Electrochemical Properties of Paper-Based Carbon Electrodes by Pyrolysis of Polydopamine

Electrochemical paper-based analytical devices represent an important platform for portable, low-cost, affordable, and decentralized diagnostics. For this kind of application, chemical functionalization plays a pivotal role to ensure high clinical performance by tuning surface properties and the area of electrodes. However, controlling different surface properties of electrodes by using a single functionalization route is still challenging. In this work, we attempted to tune the wettability, chemical composition, and electroactive area of carbon-paper-based devices by thermally treating polydopamine (PDA) at different temperatures. PDA films were deposited onto pyrolyzed paper (PP) electrodes and thermally treated in the range of 300-1000 °C. After deposition of PDA, the surface is rich in nitrogen and oxygen, it is superhydrophilic, and it has a high electroactive area. As the temperature increases, the surface becomes hydrophobic, and the electroactive area decreases. The surface modifications were followed by Raman, X-ray photoelectron microscopy (XPS), laser scanning confocal microscopy (LSCM), contact angle, scanning electron microscopy (SEM-EDS), electrical measurements, transmission electron microscopy (TEM), and electrochemical experiments. In addition, the chemical composition of nitrogen species can be tuned on the surface. As a proof of concept, we employed PDA-treated surfaces to anchor [AuCl4]- ions. After electrochemical reduction, we observed that it is possible to control the size of the nanoparticles on the surface. Our route opens a new avenue to add versatility to electrochemical interfaces in the field of paper-based electrochemical biosensors.

Serotonin: A new super effective functional monomer for molecular imprinting. The case of TNF-α detection in real matrix by Surface Plasmon Resonance

Molecular imprinting and related technologies are becoming increasingly appreciated in bioanalysis and diagnostic applications. Among the imprinted polymers, we have already demonstrated that the endogenous neurotransmitters (NTs) dopamine (DA) and norepinephrine (NE) can be efficiently used as natural and sustainable monomers to straightforwardly design and synthesize a new generation of green and "soft" Molecularly Imprinted BioPolymers (MIBPs). Here, we demonstrated for the first time the ability of a further NT, i.e., serotonin (SE), in forming adhesive imprinted nanofilms coupled to label-free optical biosensing. Its imprinting efficiency is compared with those obtained with PDA and PNE. As a model study, tumor necrosis factor-alpha (TNF-α) was selected as a biomolecular target of interest in clinical diagnostics. The biomimetic receptor was coupled to Surface Plasmon Resonance (SPR), and TNF-α detection was performed in label-free and real-time manner both in buffer and biological matrices, i.e. synovial fluid and human serum. The results indicate that, under the same imprinting and binding conditions, the analytical performances of PSE are impressively superior to those of PDA and PNE. The PSE-based MIBP was able to detect TNF-α in human matrices with a good sensitivity, selectivity, and repeatability.

Laser-Induced Graphitization of Polydopamine on Titania Nanotubes

Since the discovery of laser-induced graphite/graphene, there has been a notable surge of scientific interest in advancing diverse methodologies for their synthesis and applications. This study focuses on the utilization of a pulsed Nd:YAG laser to achieve graphitization of polydopamine (PDA) deposited on the surface of titania nanotubes. The partial graphitization is corroborated through Raman and XPS spectroscopies and supported by water contact angle, nanomechanical, and electrochemical measurements. Reactive molecular dynamics simulations confirm the possibility of graphitization in the nanosecond time scale with the evolution of NH3, H2O, and CO2 gases. A thorough exploration of the lasing parameter space (wavelength, pulse energy, and number of pulses) was conducted with the aim of improving either electrochemical activity or photocurrent generation. Whereas the 532 nm laser pulses interacted mostly with the PDA coating, the 365 nm pulses were absorbed by both PDA and the substrate nanotubes, leading to a higher graphitization degree. The majority of the photocurrent and quantum efficiency enhancement is observed in the visible light between 400 and 550 nm. The proposed composite is applied as a photoelectrochemical (PEC) sensor of serotonin in nanomolar concentrations. Because of the suppressed recombination and facilitated charge transfer caused by the laser graphitization, the proposed composite exhibits significantly enhanced PEC performance. In the sensing application, it showed superior sensitivity and a limit of detection competitive with nonprecious metal materials.

MIP-based immunoassays: A critical review

Molecularly imprinted polymers, MIPs, are man-made receptors mimicking the thermodynamic and kinetic binding behaviour of natural antibodies. Therefore, it is not surprising that many researchers have thought about MIPs as artificial receptors in immunoassay-like analytical applications, where the general machinery of the assay is maintained, but the molecular recognition is no longer assured by an antibody but by an artificial receptor. However, the number of papers devoted explicitly to applications of MIPs in the immunoassay field is quite limited if compared to the huge number of papers covering the multifaceted molecular imprinting technology. For this reason, this critical review wants to give a general view of MIP-based immunoassays, trying to highlight the critical points that have so far prevented a wider application of molecular imprinting technology in the immunoassay field and, possibly, try to suggest strategies to overcome them.

Unlocking the Potential of Molecularly Imprinted Polydopamine in Sensing Applications

Molecularly imprinted polymers (MIPs) are synthetic receptors that mimic the specificity of biological antibody-antigen interactions. By using a "lock and key" process, MIPs selectively bind to target molecules that were used as templates during polymerization. While MIPs are typically prepared using conventional monomers, such as methacrylic acid and acrylamide, contemporary advancements have pivoted towards the functional potential of dopamine as a novel monomer. The overreaching goal of the proposed review is to fully unlock the potential of molecularly imprinted polydopamine (MIPda) within the realm of cutting-edge sensing applications. This review embarks by shedding light on the intricate tapestry of materials harnessed in the meticulous crafting of MIPda, endowing them with tailored properties. Moreover, we will cover the diverse sensing applications of MIPda, including its use in the detection of ions, small molecules, epitopes, proteins, viruses, and bacteria. In addition, the main synthesis methods of MIPda, including self-polymerization and electropolymerization, will be thoroughly examined. Finally, we will examine the challenges and drawbacks associated with this research field, as well as the prospects for future developments. In its entirety, this review stands as a resolute guiding compass, illuminating the path for researchers and connoisseurs alike.

Fabrication of a composite 3D-printed titanium alloy combined with controlled in situ drug release to prevent osteosarcoma recurrence

Osteosarcoma is a malignant bone tumor occurring in adolescents. Surgery combined with adjuvant or neoadjuvant chemotherapy is the standard treatment. However, systemic chemotherapy is associated with serious side effects and a high risk of postoperative tumor recurrence, leading to a high amputation rate and mortality in cancer patients. Implant materials that can simultaneously repair large bone defects and prevent osteosarcoma recurrence are in urgent need. Herein, an intelligent system comprising 3D-printed titanium scaffold (TS) and pH-responsive PEGylated paclitaxel prodrugs was fabricated for bone defect reconstruction and recurrence prevention following osteosarcoma surgery. The drug-loaded implants exhibited excellent stability and biocompatibility for supporting the activity of bone stem cells under normal body fluid conditions and the rapid release of drugs in response to faintly acidic environments. An in vitro study demonstrated that five human osteosarcoma cell lines could be efficiently eradicated by paclitaxel released in an acidic microenvironment. Using mice models, we demonstrated that the drug-loaded TS can enable a pH-responsive treatment of postoperative tumors and effectively prevent osteosarcoma recurrence. Therefore, local implantation of this composite scaffold may be a promising topical therapeutic method to prevent osteosarcoma recurrence.

Molecularly imprinted polymers as effective capturing receptors in a pseudo-ELISA immunoassay for procalcitonin detection in veterinary species

In this study, a new sandwich-type immunoenzymatic assay, based on a molecularly imprinted polymer (MIP) as an artificial antibody (pseudo-ELISA), was developed for the determination of procalcitonin (PCT) in veterinary species. The quantification of PCT in human medicine represents the state of the art for the diagnosis of sepsis; instead the clinical studies on the relevance of PCT as a sepsis predictor in veterinary patients are few, likely due to the total absence of validated assays. MIPs have been widely used as antibody mimics for important applications, and MIP-based sandwich assays have emerged as promising analytical tools for the detection of disease biomarkers. Herein, a polynorepinephrine (PNE)-based imprinted film was directly synthesized on the well surface of a 96-well plate. Subsequently, based on a commercial ELISA kit, the PCT quantification was accomplished via a colorimetric sandwich assay by replacing the capture antibody of the kit with the PNE-based MIP. This method was performed to detect canine and equine PCT in buffer and in plasma samples. Under optimal conditions, the results obtained in plasma samples showed a limit of detection (LOD) of 5.87 ng mL^-1 and a reproducibility (CV_av%) of 10.0% for canine samples, while a LOD = 4.46 ng mL^-1 and CV_av% = 7.61% were obtained for equine samples.

Fluorescent Magnetic Nanoparticles for Bioimaging through Biomimetic Surface Modification

Nanostructured materials and systems find various applications in biomedical fields. Hybrid organo-inorganic nanomaterials are intensively studied in a wide range of areas, from visualization to drug delivery or tissue engineering. One of the recent trends in material science is biomimetic approaches toward the synthesis or modification of functional nanosystems. Here, we describe an approach toward multifunctional nanomaterials through the biomimetic polymerization of dopamine derivatives. Magnetite nanoparticles were modified with a combination of dopamine conjugates to give multifunctional magneto-fluorescent nanocomposites in one synthetic step. The obtained material showed excellent biocompatibility at concentrations up to 200 μg/mL and an in vivo biodistribution profile typical for nanosized formulations. The synthesized systems were conjugated with antibodies against HER2 to improve their selectivity toward HER2-positive cancer cells. The produced material can be used for dual magneto-optical in vivo studies or targeted drug delivery. The applied synthetic strategy can be used for the creation of various multifunctional hybrid nanomaterials in mild conditions.

An advantageous application of molecularly imprinted polymers in food processing and quality control

In the global market era, food product control is very challenging. It is impossible to track and control all production and delivery chains not only for regular customers but also for the State Sanitary Inspections. Certified laboratories currently use accurate food safety and quality inspection methods. However, these methods are very laborious and costly. The present review highlights the need to develop fast, robust, and cost-effective analytical assays to determine food contamination. Application of the molecularly imprinted polymers (MIPs) as selective recognition units for chemosensors' fabrication was herein explored. MIPs enable fast and inexpensive electrochemical and optical transduction, significantly improving detectability, sensitivity, and selectivity. MIPs compromise durability of synthetic materials with a high affinity to target analytes and selectivity of molecular recognition. Imprinted molecular cavities, present in MIPs structure, are complementary to the target analyte molecules in terms of size, shape, and location of recognizing sites. They perfectly mimic natural molecular recognition. The present review article critically covers MIPs' applications in selective assays for a wide range of food products. Moreover, numerous potential applications of MIPs in the food industry, including sample pretreatment before analysis, removal of contaminants, or extraction of high-value ingredients, are discussed.

Colorimetric determination of carbidopa in anti-Parkinson drugs based on 4-hydroxy-3-methoxybenzaldazine formation by reaction with vanillin

In this paper is reported the selective colorimetric detection and quantification of carbidopa, an inhibitor of aromatic amino acid decarboxylase, in the co-presence of levodopa as dopamine precursor in pharmaceutical formulations for the treatment of Parkinson's disease. The method is based on the selective condensation reaction between the hydrazine group from carbidopa and the formyl functional group of vanillin, a natural flavoring agent, in acidified alcoholic solution. The yellow color development (λmax ~ 420 nm) due to the formation of 4-hydroxy-3-methoxybenzaldazine (HMOB) was observed for carbidopa only, whereas levodopa, lacking the hydrazine group, did not color the solution, as expected. The calibration curves for two tablet formulations of levodopa in combination with carbidopa (4:1) were superimposable with levodopa/carbidopa (4:1), as well as carbidopa alone, in standard solution, i.e., the excipients and additives did not interfere with carbidopa determination, corresponding to a mean recovery about 105%. The linear dynamic range was between 5.00 and 50.0 mg L-1 with very good reproducibility within this range (CVav% about 3-4%) and very good sensitivity, with limits of quantification of about 1 mg L-1. The colorimetric method developed here is very simple, inexpensive, and effective for drug estimation and quality control of pharmaceutical formulations.

Tailoring Diffusional Fields in Zwitterion/Dopamine Copolymer Electropolymerized at Carbon Nanowalls for Sensitive Recognition of Neurotransmitters

The importance of neurotransmitter sensing in the diagnosis and treatment of many psychological illnesses and neurodegenerative diseases is non-negotiable. For electrochemical sensors to become widespread and accurate, a long journey must be undertaken for each device, from understanding the materials at the molecular level to real applications in biological fluids. We report a modification of diamondized boron-doped carbon nanowalls (BCNWs) with an electropolymerized polydopamine/polyzwitterion (PDA|PZ) coating revealing tunable mechanical and electrochemical properties. Zwitterions are codeposited with PDA and noncovalently incorporated into a structure. This approach causes a specific separation of the diffusion fields generated by each nanowall during electrochemical reactions, thus increasing the contribution of the steady-state currents in the amperometric response. This phenomenon has a profound effect on the sensing properties, leading to a 4-fold enhancement of the sensitivity (3.1 to 14.3 μA cm^-2 μM^-1) and a 5-fold decrease of the limit of detection (505 to 89 nM) in comparison to the pristine BCNWs. Moreover, as a result of the antifouling capabilities of the incorporated zwitterions, this enhancement is preserved in bovine serum albumin (BSA) with a high protein concentration. The presence of zwitterion facilitates the transport of dopamine in the direction of the electrode by intermolecular interactions such as cation-π and hydrogen bonds. On the other hand, polydopamine units attached to the surface form molecular pockets driven by hydrogen bonds and π-π interactions. As a result, the intermediate state of dopamine-analyte oxidation is stabilized, leading to the enhancement of the sensing properties.

Bio-Inspired Surface Modification of Magnetite Nanoparticles with Dopamine Conjugates

Organically-coated nanomaterials are intensively studied and find numerous applications in a wide range of areas from optics to biomedicine. One of the recent trends in material science is the application of bio-mimetic polydopamine coatings that can be produced on a variety of substrates in a cost-efficient way under mild conditions. Such coatings not only modify the biocompatibility of the material but also add functional amino groups to the surface that can be further modified by classic conjugation techniques. Here we show an alternative strategy for substrates modification using dopamine conjugates instead of native dopamine. Compared to the classic scheme, the proposed strategy allows separation of the “organic” and “colloidal” stages, and simplified identification and purification steps. Modification with pre-modified dopamine made it possible to achieve high loading capacities with active components up to 10.5% wt. A series of organo-inorganic hybrids were synthesized and their bioactivity was analyzed.

Quartz crystal microbalance-based biosensing of hepatitis B antigen using a molecularly imprinted polydopamine film

Quartz crystal microbalance (QCM)-based biosensors are highly attractive as rapid diagnostic devices for detecting infectious diseases. However, the fabrication of QCM-based biosensors often involves tedious processes due to the poor stability of the biological recognition elements. In this work, the simple self-polymerisation of dopamine was used to functionalise the QCM crystal surface with a molecularly imprinted polydopamine (MIPDA) sensing film for detecting the hepatitis B core antigen (HBcAg), a serological biomarker of hepatitis B. Recognition cavities that complemented the size and shape of HBcAg were observed on the QCM crystal surface after functionalisation with the MIPDA film. The MIPDA-QCM biosensor showed a selective affinity for HBcAg, recording frequency responses up to 7.8 folds larger towards HBcAg compared to human serum albumin at the same analyte concentrations. The biosensor response was enhanced by using the optimal concentrations of 10 mg mL^-1 of dopamine and 1 mg mL^-1 of template for MIPDA film formation, resulting in a low detection limit (0.88 μg mL^-1) that enables the detection of clinically relevant titres of HBcAg. The detection process could be completed within 10 min after sample loading without additional steps for signal amplification, highlighting the practical advantages of the MIPDA-QCM biosensor for point-of-care detection of hepatitis B.

Polydopamine stabilizes silver nanoparticles as a SERS substrate for efficient detection of myocardial infarction

Rapid and accurate detection of myocardial infarction (MI) can boost the patient's chance of survival. Surface enhanced Raman scattering (SERS) is an outstanding diagnostic technique because of its strong light stability, high resolution, and qualitative and quantitative analysis based on the characteristic fingerprint. However, its reliability, stability and specificity remain to be improved, especially in the quantitative analysis of serum samples. In this study, we developed in situ silver nanoparticles (Ag NPs) on the surface of polydopamine (PDA) as a SERS substrate and found that PDA could act as a reducing agent to support the nucleation and growth of Ag NPs and control the distance and aggregation of Ag NPs to stabilize the Raman signal. In a standard phosphate buffered saline (PBS) environment, PDA@Ag could reach a low detection limit of 0.01 ng mL^-1 cardiac troponin I (cTn I) with a good linear relationship. At the same time, the PDA@Ag substrate also possessed excellent stability, specificity and biocompatibility for cTn I detection. In addition, we verified the application potentiality of PDA@Ag in real serum samples and found that the performance of SERS was almost the same as that in PBS. This excellent detection performance of PDA@Ag could be attributed to both the enhanced electromagnetic field and the increased Raman cross-section, dominated by the gap distance between Ag NPs, reaction force between the antigen and the antibody and excellent biocompatibility and reducibility of PDA. In conclusion, this work may provide a new perspective for the in situ synthesis and growth of a uniform SERS substrate on the carrier to achieve the stability and specificity of SERS-based biological detection of MI.

Structurally Constrained MUC1-Tn Mimetic Antigen as Template for Molecularly Imprinted Polymers (MIPs): A Promising Tool for Cancer Diagnostics

Abnormal glycoconjugates have distinctly been recognized as potential biomarkers for cancer diagnosis. A great deal of attention has been focused on Tn antigen, an oversimplified mucin-1 O-glycan, over-expressed in different cancers. Herein, we investigate the possibility to replace the use of anti-Tn monoclonal antibodies with an innovative class of catecholamine-based Molecularly Imprinted Polymers (MIPs), emerging in recent years as promising tools for bioanalytical applications. MIPs are synthetic receptors characterized by high sensitivity and specificity towards the imprinted target. Here, original polynorepinephrine-based MIPs coupled to Surface Plasmon Resonance biosensing for Tn antigen recognition are reported. We have verified the imprinting and binding capacity of these MIPs towards very small antigenic entities, represented by the natural Tn antigen and the TnThr mimetic 1 (conjugated to BSA or linked to a MUC1 hexapeptide analogue), and compared the biosensor performances with an anti-Tn monoclonal antibody. The results clearly display the effectiveness of the pursued imprinting strategies.

Polydopamine-Coated Magnetic Iron Oxide Nanoparticles: From Design to Applications

Magnetic iron oxide nanoparticles have been extensively investigated due to their applications in various fields such as biomedicine, sensing, and environmental remediation. However, they need to be coated with a suitable material in order to make them biocompatible and to add new functionalities on their surface. This review is intended to give a comprehensive overview of recent advantages and applications of iron oxide nanoparticles coated by polydopamine film. The synthesis method of magnetic nanoparticles, their functionalization with bioinspired materials and (in particular) with polydopamine are discussed. Finally, some interesting applications of polydopamine-coated magnetic iron oxide nanoparticles will be pointed out.

On-line monitoring of the dopamine-based molecular imprinting processes for protein templates with the assistance of a fluorescent indicator

On-line monitoring of the dopamine (DA)-based molecular imprinting processes over Fe₃O₄@SiO₂-NH₂ nanoparticles (SiMNPs) is reported by using a real-time quantitative PCR machine. Taking advantages of the efficient fluorescence quenching capability of polydopamine (PDA) and its high binding affinity to rhodamine B (RhB), we performed molecular imprinting against different proteins with free dopamine as the functional monomer and RhB as a fluorescent indicator. Along with the template molecules, the fluorescent indicators were continuously encapsulated into the PDA layer formed on the surface of the SiMNPs, resulting in immediate quenching of the fluorescence, which can be conveniently monitored in real time. As proteins showed sequence-dependent influences on the oxidation of dopamine and subsequent self-assembly on the surface of the SiMNPs, the observed fluorescence signals clearly indicated the polymerization progress in the presence of the template proteins, allowing precise control of the reaction time for different templates at a given initial concentration. The optimum end point of the reaction was found to be when 90 ± 3% of the templates had been encapsulated into the polymer, which offered the highest imprinting factor and selectivity. We applied the approach to prepare a primary PDA-based surface imprinted polymer for a multifunctional protein apurinic/apyrimidinic endonuclease/redox effector factor 1 (APE1). After further introduction of 3-hydroxyphenylboronic acid to the interfaces between APE1 and PDA, the resultant molecularly imprinted polymers (MIP-II) enabled quantitative isolation APE1 from cell lysate samples. The developed approach will be useful for the quantitative preparation of PDA-based MIPs for precious template proteins with limited input quantity. It is also applicable for further study on the effects of different proteins or peptides on the PDA formation reactions.

Selective Passivation of Three-Dimensional Carbon Microelectrodes by Polydopamine Electrodeposition and Local Laser Ablation

In this article, a novel approach for selective passivation of three-dimensional pyrolytic carbon microelectrodes via a facile electrochemical polymerization of a non-conductive polymer (polydopamine, PDA) onto the surface of carbon electrodes, followed by a selective laser ablation is elaborated. The 3D carbon electrodes consisting of 284 micropillars on a circular 2D carbon base layer were fabricated by pyrolysis of lithographically patterned negative photoresist SU-8. As a second step, dopamine was electropolymerized onto the electrode by cyclic voltammetry (CV) to provide an insulating layer at its surface. The CV parameters, such as the scan rate and the number of cycles, were investigated and optimized to achieve a reliable and uniform non-conductive coating on the surface of the 3D pyrolytic carbon electrode. Finally, the polydopamine was selectively removed only from the tips of the pillars, by using localized laser ablation. The selectively passivated electrodes were characterized by scanning electron microscopy, cyclic voltammetry and electrochemical impedance spectroscopy methods. Due to the surface being composed of highly biocompatible materials, such as pyrolytic carbon and polydopamine, these 3D electrodes are particularly suited for biological application, such as electrochemical monitoring of cells or retinal implants, where highly localized electrical stimulation of nerve cells is beneficial.

Imparting conformational memory for material adhesion

Adhesion between similar and dissimilar materials is essential to many biological systems and synthetic materials, devices, and machines. Since the inception of adhesion science more than five decades ago, adhesion to a surface has long been recognized as beyond two-dimensional. Similarly, molecular conformation - the three-dimensional arrangement of atoms in a molecule - is ubiquitous in biology and fundamental to the binding of biomolecules. However, the connection between these concepts, which could link molecular conformation in biology to micro- and macroscopic adhesion in materials science, remains elusive. Herein, we examine this connection by manipulating the molecular conformation of a mussel-inspired universal coating, which imparts a memory for recognizing different hydrogels. This approach leads to significantly (several fold) increased interfacial adhesion between the coating and hydrogels across a broad range of length scales, from molecular to macroscopic. Furthermore, we demonstrate that imparting memory is a general and facile noncovalent approach for enhancing interfacial adhesion that, with suitable energy dissipation, can be used for the bonding of materials.

Melanochrome-based colorimetric assay for quantitative detection of levodopa in co-presence of carbidopa and its application to relevant anti-Parkinson drugs

In this paper is reported the selective detection and quantification of levodopa in co-presence of carbidopa. The method took advantage of the spontaneous oxidation and color development of levodopa at basic pH here driven by alkaline earth cations and co-solvent in solution. We have shown for the first time the generation and stabilization of the purple melanochrome from levodopa, by using magnesium acetate and dimethyl sulfoxide, which was here exploited for the development of a quantitative colorimetric assay for the active principle ingredient in commercial drugs for the treatment of Parkinson's disease. The calibration curves of levodopa in the two tablet formulations, containing carbidopa as decarboxylase inhibitor, showed a common linear trend between 10 mg L^-1 and 40 mg L^-1 with levodopa alone or in combination with carbidopa in standard solutions, with very good reproducibility (CV_av%, 3.3% for both brand and generic drug) and very good sensitivity, with limit of quantification about 0.6 mg L^-1 in any case. The colorimetric method here developed is very simple and effective, appearing as a rapid and low-cost alternative to other methodologies, involving large and expensive instrumentations, for drug estimation and quality control of pharmaceutical formulations.

Sensitive 'two-steps' competitive assay for gonadotropin-releasing hormone detection via SPR biosensing and polynorepinephrine-based molecularly imprinted polymer

The work reports an innovative bioassay for the detection of gonadorelin in urine, a gonadotropin-releasing hormone agonist widely used in fertility medicine and to treat hormonal dysfunctions. Gonadorelin is also a synthetic hormone listed by the World Anti-Doping Agency (WADA) and of interest in anti-doping controls. The main novelty relies on the development of a biocompatible, stable, and low-cost biomimetic receptor alternative to classic antibodies. Starting from norepinephrine monomer, a highly selective and sensitive molecularly imprinted polymer (MIP) was developed and optimized for optical real-time and label-free SPR biosensing. The selectivity has been addressed by testing a series of peptides, from high to low similarity, both in terms of molecular weight and primary sequence. Due to the very low molecular weight of gonadorelin (1182 Da), a 'two-steps' competitive assay was developed. Particular attention has been paid to the design of the competitor and its binding affinity constant towards the MIP, being a key step for the success of the competitive strategy. The SPR assay was first optimized in standard conditions and finally applied to untreated urine samples, achieving the sensitivity required by WADA guidelines. The MIP, tested in parallel with a monoclonal antibody, gave comparable results in terms of affinity constants and selectivity towards possible interfering analytes. However, the biomimetic receptor appears clearly superior in terms of sensitivity and reproducibility. This, together with its preparation simplicity, the extremely low-cost of the monomer and its reusability for hundreds of measurements, make polynorepinephrine-based MIPs powerful rivals to immune-based approaches in the near future for similar applications.

A magnetic phosphorescence molecularly imprinted polymers probe based on manganese-doped ZnS quantum dots for rapid detection of trace norfloxacin residual in food

This paper reports the development of a novel probe based on magnetic room-temperature phosphorescence quantum dots with molecularly imprinted polymers (MQD-MIPs) for the rapid detection of trace norfloxacin (NFX) residual in complex food matrix. The highly selective probe was constructed by surface molecular imprinting technology using magnetic materials (Fe₃O₄ nanoparticles) as core, Mn-doped ZnS quantum dots (Mn-ZnS QDs) as phosphorescent materials, NFX as template, 3-aminopropyltriethoxysilane as functional monomer, and tetraethoxysilane as crosslinking agent. The as-obtained MQD-MIPs were characterized in detail by transmission electron microscopy, scanning electron microscopy, X-ray powder diffraction, Fourier transform infrared spectrometry, and vibrating sample magnetometer. A magnetic strength of 37.64 emu g^-1 was recorded. Also, the probe displayed excellent room temperature phosphorescence properties with excitation/emission peaks at 300/590 nm. Under the optimized conditions, the detection time was less than 40 min, phosphorescence intensity varied linearly with concentration from 1 to 90 μg·L^-1, and detection limit reached as low as 0.80 μg·L^-1. Furthermore, the MQD-MIPs-based probe successfully detected norfloxacin residues in spiked fish and milk samples with recoveries of 90.92-111.53% and RSD <7%, outperforming the standard control method-HPLC-FLD (recoveries of 85.89-118.28%).

Detection of canine and equine procalcitonin for sepsis diagnosis in veterinary clinic by the development of novel MIP-based SPR biosensors

Procalcitonin (PCT) has emerged as a promising biomarker for the rapid identification of sepsis both in human and veterinary medicine. Nevertheless, the only analytical method currently available for the detection of PCT in veterinary species, is represented by immunoassays, useful only for research purposes. In this work, we report the development of two biosensors which utilize molecularly imprinted polymers (MIPs) for the detection of canine and equine PCT. Dopamine (DA) and norepinephrine (NE) were used as monomers for the synthesis of the MIP films on surface plasmon resonance (SPR) gold chips and the imprinting efficiency of canine and equine PCT in terms of binding affinity toward the analyte, selectivity, and sensitivity were compared. After optimization in buffer conditions, PCTs calibration was successfully achieved also in animal plasma, with good specificity and reproducibility. More effective protein binding and imprinting was obtained with polynorepinephrine (PNE) for both PCTs, and the SPR biosensors were able to detect the biomarkers in plasma with a LOD of 15 ng mL^-1 and 30 ng mL^-1 respectively for equine and canine PCT.

Polydopamine-based quantitation of albuminuria for the assessment of kidney damage

Proteinuria is considered indicative of kidney damage that can be related to various adverse outcomes. Nowadays, there is a huge demand for routine urine screening methods to assess health risks in clinical setting without expensive procedures and long pretreatment of the sample. To address this issue, a polydopamine-based colorimetric assay to determine urinary albumin concentration in real samples is proposed here. The core of this approach relies on the established competitive adsorption of polydopamine film and human serum albumin onto the polystyrene surface of ELISA plates. Herein, we investigated the influence of temperature and the Tris-HCl buffer concentration on the polydopamine film growth. The absorbance of polydopamine film, after 24 h at 25 °C, decreases with the increase of HSA concentration, allowing the selective detection of HSA down to 0.036 ± 0.001 g L^-1 in untreated urine. This simple and low-cost bioanalytical assay exhibited very good reproducibility, %CV_mean = 2 in human urine, and was superior in terms of analytical performances to some standard methods available on the market, especially in comparison to the Bradford assay, for early screening and assessment of kidney damage.

The Mechanisms and the Applications of Antibacterial Polymers in Surface Modification on Medical Devices

Medical device contamination caused by microbial pathogens such as bacteria and fungi has posed a severe threat to the patients' health in hospitals. Due to the increasing resistance of pathogens to antibiotics, the efficacy of traditional antibiotics treatment is gradually decreasing for the infection treatment. Therefore, it is urgent to develop new antibacterial drugs to meet clinical or civilian needs. Antibacterial polymers have attracted the interests of researchers due to their unique bactericidal mechanism and excellent antibacterial effect. This article reviews the mechanism and advantages of antimicrobial polymers and the consideration for their translation. Their applications and advances in medical device surface coating were also reviewed. The information will provide a valuable reference to design and develop antibacterial devices that are resistant to pathogenic infections.

Polydopamine and Its Derivative Surface Chemistry in Material Science: A Focused Review for Studies at KAIST

Polydopamine coating, the first material-independent surface chemistry, and its related methods significantly influence virtually all areas of material science and engineering. Functionalized surfaces of metal oxides, synthetic polymers, noble metals, and carbon materials by polydopamine and its related derivatives exhibit a variety of properties for cell culture, microfluidics, energy storage devices, superwettability, artificial photosynthesis, encapsulation, drug delivery, and numerous others. Unlike other articles, this review particularly focuses on the development of material science utilizing polydopamine and its derivatives coatings at the Korea Advanced Institute of Science and Technology for a decade. Herein, it is demonstrated how material-independent coating methods provide solutions for challenging problems existed in many interdisciplinary areas in bio-, energy-, and nanomaterial science by collaborations and independent research.

Preparation of polydopamine-coated, graphene oxide/Fe3 O4 - imprinted nanoparticles for selective removal of sulfonylurea herbicides in cereals

BACKGROUND

Sulfonylureas are potentially toxic broad-spectrum herbicides. They pose a persistent threat to food safety and the environment. It is therefore important to develop a rapid and efficient pretreatment and detection method to prevent their harmful effects on human health.

RESULTS

In the present work, a novel and highly selective absorbent for chlorosulfuron (CS) detection was prepared by the simple self-polymerization of dopamine on the surface of magnetic graphene oxide using a CS template. The resultant imprinted nanoparticles (MGO@PDA-MIPs) were characterized by transmission electron microscopy, X-ray diffraction, vibrating-sample magnetometry, thermogravimetric analysis, and nitrogen adsorption-desorption. The adsorption experiments demonstrated that the MGO@PDA-MIPs have excellent selectivity with regard to CS, with a high imprinting factor of 3.41 compared with a non-imprinted polymer. The nanoparticles rapidly achieve adsorption equilibrium and efficient desorption because there are numerous binding sites on the thin polydopamine imprinting layer. Under optimized conditions, the MGO@PDA-MIPs can be used to detect sulfonylurea residues in cereal samples by magnetic solid phase extraction coupled with high performance liquid chromatography (HPLC). The nanoparticles have a satisfactory recovery rate (80.65-101.01%) with a relative standard deviation (RSD) of less than 7.15%, and a limit of detection with regard to CS of 1.61 μg kg^-1 (S/N = 3). They can also be re-used at least seven times.

CONCLUSION

The MGO@PDA-MIPs have outstanding recognition performance, and can be prepared by a facile, single-step, and environmentally friendly process. They therefore have excellent potential for the recognition and separation of trace sulfonylurea herbicides in complex matrices. © 2020 Society of Chemical Industry.

Polydopamine-based molecularly imprinted thin films for electro-chemical sensing of nitro-explosives in aqueous solutions

A sensitive electrochemical sensor was developed for the detection of nitro-explosives in aqueous solutions based on thin molecularly imprinted polydopamine films. Dopamine was identified in silico, based on DFT (density functional theory) calculations with the ωB97X-D/6-31G* basis set, as the best functional monomer and electropolymerized via cyclic voltammetry (CV) in the presence of carboxylic acid-based structural analogues ('dummy' templates) for two model nitro-explosives: TNT (2,4,6-trinitrotoluene) and RDX (Research Department eXplosive, 1,3,5-trinitroperhydro-1,3,5-triazine). This approach afforded a homogenous coverage of gold electrodes with imprinted films of tunable thickness. The electropolymerized molecularly imprinted polydopamine films allowed for a 10⁵-fold sensitivity improvement over a bare gold electrode based on tracking the redox peaks of the targets by CV. This improved sensitivity is ascribed to the ability of the MIP to concentrate its target in proximity to the transduction element. The MIP films showed reproducible binding in phosphate buffer (10 mM, pH 7.4), with a dynamic range from 0.1 nM to 10 nM for both TNT and RDX and an increased selectivity over closely related structural analogues.